| /* | |
| * MPC85xx/86xx PCI/PCIE support routing. | |
| * | |
| * Copyright 2007 Freescale Semiconductor, Inc | |
| * | |
| * Initial author: Xianghua Xiao <x.xiao@freescale.com> | |
| * Recode: ZHANG WEI <wei.zhang@freescale.com> | |
| * Rewrite the routing for Frescale PCI and PCI Express | |
| * Roy Zang <tie-fei.zang@freescale.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/delay.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/bootmem.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/machdep.h> | |
| #include <sysdev/fsl_soc.h> | |
| #include <sysdev/fsl_pci.h> | |
| /* atmu setup for fsl pci/pcie controller */ | |
| void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) | |
| { | |
| struct ccsr_pci __iomem *pci; | |
| int i; | |
| pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", | |
| (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1); | |
| pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); | |
| /* Disable all windows (except powar0 since its ignored) */ | |
| for(i = 1; i < 5; i++) | |
| out_be32(&pci->pow[i].powar, 0); | |
| for(i = 0; i < 3; i++) | |
| out_be32(&pci->piw[i].piwar, 0); | |
| /* Setup outbound MEM window */ | |
| for(i = 0; i < 3; i++) | |
| if (hose->mem_resources[i].flags & IORESOURCE_MEM){ | |
| resource_size_t pci_addr_start = | |
| hose->mem_resources[i].start - | |
| hose->pci_mem_offset; | |
| pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", | |
| (u64)hose->mem_resources[i].start, | |
| (u64)hose->mem_resources[i].end | |
| - (u64)hose->mem_resources[i].start + 1); | |
| out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12)); | |
| out_be32(&pci->pow[i+1].potear, 0); | |
| out_be32(&pci->pow[i+1].powbar, | |
| (hose->mem_resources[i].start >> 12)); | |
| /* Enable, Mem R/W */ | |
| out_be32(&pci->pow[i+1].powar, 0x80044000 | |
| | (__ilog2(hose->mem_resources[i].end | |
| - hose->mem_resources[i].start + 1) - 1)); | |
| } | |
| /* Setup outbound IO window */ | |
| if (hose->io_resource.flags & IORESOURCE_IO){ | |
| pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " | |
| "phy base 0x%016llx.\n", | |
| (u64)hose->io_resource.start, | |
| (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1, | |
| (u64)hose->io_base_phys); | |
| out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)); | |
| out_be32(&pci->pow[i+1].potear, 0); | |
| out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)); | |
| /* Enable, IO R/W */ | |
| out_be32(&pci->pow[i+1].powar, 0x80088000 | |
| | (__ilog2(hose->io_resource.end | |
| - hose->io_resource.start + 1) - 1)); | |
| } | |
| /* Setup 2G inbound Memory Window @ 1 */ | |
| out_be32(&pci->piw[2].pitar, 0x00000000); | |
| out_be32(&pci->piw[2].piwbar,0x00000000); | |
| out_be32(&pci->piw[2].piwar, PIWAR_2G); | |
| } | |
| void __init setup_pci_cmd(struct pci_controller *hose) | |
| { | |
| u16 cmd; | |
| int cap_x; | |
| early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); | |
| cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | |
| | PCI_COMMAND_IO; | |
| early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); | |
| cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); | |
| if (cap_x) { | |
| int pci_x_cmd = cap_x + PCI_X_CMD; | |
| cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | |
| | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; | |
| early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); | |
| } else { | |
| early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); | |
| } | |
| } | |
| static int fsl_pcie_bus_fixup; | |
| static void __init quirk_fsl_pcie_header(struct pci_dev *dev) | |
| { | |
| /* if we aren't a PCIe don't bother */ | |
| if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) | |
| return ; | |
| dev->class = PCI_CLASS_BRIDGE_PCI << 8; | |
| fsl_pcie_bus_fixup = 1; | |
| return ; | |
| } | |
| int __init fsl_pcie_check_link(struct pci_controller *hose) | |
| { | |
| u32 val; | |
| early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); | |
| if (val < PCIE_LTSSM_L0) | |
| return 1; | |
| return 0; | |
| } | |
| void fsl_pcibios_fixup_bus(struct pci_bus *bus) | |
| { | |
| struct pci_controller *hose = (struct pci_controller *) bus->sysdata; | |
| int i; | |
| if ((bus->parent == hose->bus) && | |
| ((fsl_pcie_bus_fixup && | |
| early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || | |
| (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) | |
| { | |
| for (i = 0; i < 4; ++i) { | |
| struct resource *res = bus->resource[i]; | |
| struct resource *par = bus->parent->resource[i]; | |
| if (res) { | |
| res->start = 0; | |
| res->end = 0; | |
| res->flags = 0; | |
| } | |
| if (res && par) { | |
| res->start = par->start; | |
| res->end = par->end; | |
| res->flags = par->flags; | |
| } | |
| } | |
| } | |
| } | |
| int __init fsl_add_bridge(struct device_node *dev, int is_primary) | |
| { | |
| int len; | |
| struct pci_controller *hose; | |
| struct resource rsrc; | |
| const int *bus_range; | |
| pr_debug("Adding PCI host bridge %s\n", dev->full_name); | |
| /* Fetch host bridge registers address */ | |
| if (of_address_to_resource(dev, 0, &rsrc)) { | |
| printk(KERN_WARNING "Can't get pci register base!"); | |
| return -ENOMEM; | |
| } | |
| /* Get bus range if any */ | |
| bus_range = of_get_property(dev, "bus-range", &len); | |
| if (bus_range == NULL || len < 2 * sizeof(int)) | |
| printk(KERN_WARNING "Can't get bus-range for %s, assume" | |
| " bus 0\n", dev->full_name); | |
| ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS; | |
| hose = pcibios_alloc_controller(dev); | |
| if (!hose) | |
| return -ENOMEM; | |
| hose->first_busno = bus_range ? bus_range[0] : 0x0; | |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; | |
| setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, | |
| PPC_INDIRECT_TYPE_BIG_ENDIAN); | |
| setup_pci_cmd(hose); | |
| /* check PCI express link status */ | |
| if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { | |
| hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | | |
| PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; | |
| if (fsl_pcie_check_link(hose)) | |
| hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; | |
| } | |
| printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " | |
| "Firmware bus number: %d->%d\n", | |
| (unsigned long long)rsrc.start, hose->first_busno, | |
| hose->last_busno); | |
| pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", | |
| hose, hose->cfg_addr, hose->cfg_data); | |
| /* Interpret the "ranges" property */ | |
| /* This also maps the I/O region and sets isa_io/mem_base */ | |
| pci_process_bridge_OF_ranges(hose, dev, is_primary); | |
| /* Setup PEX window registers */ | |
| setup_pci_atmu(hose, &rsrc); | |
| return 0; | |
| } | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); | |
| DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); |