|  | /* | 
|  | * Copyright 2014 Carlo Caione <carlo@caione.org> | 
|  | * | 
|  | * This file is dual-licensed: you can use it either under the terms | 
|  | * of the GPL or the X11 license, at your option. Note that this dual | 
|  | * licensing only applies to this file, and not this project as a | 
|  | * whole. | 
|  | * | 
|  | *  a) This library is free software; you can redistribute it and/or | 
|  | *     modify it under the terms of the GNU General Public License as | 
|  | *     published by the Free Software Foundation; either version 2 of the | 
|  | *     License, or (at your option) any later version. | 
|  | * | 
|  | *     This library is distributed in the hope that it will be useful, | 
|  | *     but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *     GNU General Public License for more details. | 
|  | * | 
|  | *     You should have received a copy of the GNU General Public | 
|  | *     License along with this library; if not, write to the Free | 
|  | *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, | 
|  | *     MA 02110-1301 USA | 
|  | * | 
|  | * Or, alternatively, | 
|  | * | 
|  | *  b) Permission is hereby granted, free of charge, to any person | 
|  | *     obtaining a copy of this software and associated documentation | 
|  | *     files (the "Software"), to deal in the Software without | 
|  | *     restriction, including without limitation the rights to use, | 
|  | *     copy, modify, merge, publish, distribute, sublicense, and/or | 
|  | *     sell copies of the Software, and to permit persons to whom the | 
|  | *     Software is furnished to do so, subject to the following | 
|  | *     conditions: | 
|  | * | 
|  | *     The above copyright notice and this permission notice shall be | 
|  | *     included in all copies or substantial portions of the Software. | 
|  | * | 
|  | *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
|  | *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | 
|  | *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
|  | *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | 
|  | *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | 
|  | *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | 
|  | *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | 
|  | *     OTHER DEALINGS IN THE SOFTWARE. | 
|  | */ | 
|  |  | 
|  | /include/ "skeleton.dtsi" | 
|  |  | 
|  | / { | 
|  | interrupt-parent = <&gic>; | 
|  |  | 
|  | L2: l2-cache-controller@c4200000 { | 
|  | compatible = "arm,pl310-cache"; | 
|  | reg = <0xc4200000 0x1000>; | 
|  | cache-unified; | 
|  | cache-level = <2>; | 
|  | }; | 
|  |  | 
|  | gic: interrupt-controller@c4301000 { | 
|  | compatible = "arm,cortex-a9-gic"; | 
|  | reg = <0xc4301000 0x1000>, | 
|  | <0xc4300100 0x0100>; | 
|  | interrupt-controller; | 
|  | #interrupt-cells = <3>; | 
|  | }; | 
|  |  | 
|  | timer@c1109940 { | 
|  | compatible = "amlogic,meson6-timer"; | 
|  | reg = <0xc1109940 0x14>; | 
|  | interrupts = <0 10 1>; | 
|  | }; | 
|  |  | 
|  | soc { | 
|  | compatible = "simple-bus"; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <1>; | 
|  | ranges; | 
|  |  | 
|  | wdt: watchdog@c1109900 { | 
|  | compatible = "amlogic,meson6-wdt"; | 
|  | reg = <0xc1109900 0x8>; | 
|  | }; | 
|  |  | 
|  | uart_AO: serial@c81004c0 { | 
|  | compatible = "amlogic,meson-uart"; | 
|  | reg = <0xc81004c0 0x14>; | 
|  | interrupts = <0 90 1>; | 
|  | clocks = <&clk81>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | uart_A: serial@c81084c0 { | 
|  | compatible = "amlogic,meson-uart"; | 
|  | reg = <0xc81084c0 0x14>; | 
|  | interrupts = <0 90 1>; | 
|  | clocks = <&clk81>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | uart_B: serial@c81084dc { | 
|  | compatible = "amlogic,meson-uart"; | 
|  | reg = <0xc81084dc 0x14>; | 
|  | interrupts = <0 90 1>; | 
|  | clocks = <&clk81>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | uart_C: serial@c8108700 { | 
|  | compatible = "amlogic,meson-uart"; | 
|  | reg = <0xc8108700 0x14>; | 
|  | interrupts = <0 90 1>; | 
|  | clocks = <&clk81>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | i2c_AO: i2c@c8100500 { | 
|  | compatible = "amlogic,meson6-i2c"; | 
|  | reg = <0xc8100500 0x20>; | 
|  | interrupts = <0 92 1>; | 
|  | clocks = <&clk81>; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | i2c_A: i2c@c1108500 { | 
|  | compatible = "amlogic,meson6-i2c"; | 
|  | reg = <0xc1108500 0x20>; | 
|  | interrupts = <0 21 1>; | 
|  | clocks = <&clk81>; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | i2c_B: i2c@c11087c0 { | 
|  | compatible = "amlogic,meson6-i2c"; | 
|  | reg = <0xc11087c0 0x20>; | 
|  | interrupts = <0 128 1>; | 
|  | clocks = <&clk81>; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | ir_receiver: ir-receiver@c8100480 { | 
|  | compatible= "amlogic,meson6-ir"; | 
|  | reg = <0xc8100480 0x20>; | 
|  | interrupts = <0 15 1>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | spifc: spi@c1108c80 { | 
|  | compatible = "amlogic,meson6-spifc"; | 
|  | reg = <0xc1108c80 0x80>; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | clocks = <&clk81>; | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | ethmac: ethernet@c9410000 { | 
|  | compatible = "amlogic,meson6-dwmac", "snps,dwmac"; | 
|  | reg = <0xc9410000 0x10000 | 
|  | 0xc1108108 0x4>; | 
|  | interrupts = <0 8 1>; | 
|  | interrupt-names = "macirq"; | 
|  | clocks = <&clk81>; | 
|  | clock-names = "stmmaceth"; | 
|  | status = "disabled"; | 
|  | }; | 
|  | }; | 
|  | }; /* end of / */ |