| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // Ranjani Sridharan <ranjani.sridharan@linux.intel.com> |
| // Rander Wang <rander.wang@intel.com> |
| // Keyon Jie <yang.jie@linux.intel.com> |
| // |
| |
| /* |
| * Hardware interface for generic Intel audio DSP HDA IP |
| */ |
| |
| #include <sound/hdaudio_ext.h> |
| #include <sound/hda_register.h> |
| #include "../ops.h" |
| #include "hda.h" |
| |
| /* |
| * HDA Operations. |
| */ |
| |
| int hda_dsp_ctrl_link_reset(struct snd_sof_dev *sdev, bool reset) |
| { |
| unsigned long timeout; |
| u32 gctl = 0; |
| u32 val; |
| |
| /* 0 to enter reset and 1 to exit reset */ |
| val = reset ? 0 : SOF_HDA_GCTL_RESET; |
| |
| /* enter/exit HDA controller reset */ |
| snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_GCTL, |
| SOF_HDA_GCTL_RESET, val); |
| |
| /* wait to enter/exit reset */ |
| timeout = jiffies + msecs_to_jiffies(HDA_DSP_CTRL_RESET_TIMEOUT); |
| while (time_before(jiffies, timeout)) { |
| gctl = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, SOF_HDA_GCTL); |
| if ((gctl & SOF_HDA_GCTL_RESET) == val) |
| return 0; |
| usleep_range(500, 1000); |
| } |
| |
| /* enter/exit reset failed */ |
| dev_err(sdev->dev, "error: failed to %s HDA controller gctl 0x%x\n", |
| reset ? "reset" : "ready", gctl); |
| return -EIO; |
| } |
| |
| int hda_dsp_ctrl_get_caps(struct snd_sof_dev *sdev) |
| { |
| struct hdac_bus *bus = sof_to_bus(sdev); |
| u32 cap, offset, feature; |
| int count = 0; |
| |
| offset = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, SOF_HDA_LLCH); |
| |
| do { |
| cap = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, offset); |
| |
| dev_dbg(sdev->dev, "checking for capabilities at offset 0x%x\n", |
| offset & SOF_HDA_CAP_NEXT_MASK); |
| |
| feature = (cap & SOF_HDA_CAP_ID_MASK) >> SOF_HDA_CAP_ID_OFF; |
| |
| switch (feature) { |
| case SOF_HDA_PP_CAP_ID: |
| dev_dbg(sdev->dev, "found DSP capability at 0x%x\n", |
| offset); |
| bus->ppcap = bus->remap_addr + offset; |
| sdev->bar[HDA_DSP_PP_BAR] = bus->ppcap; |
| break; |
| case SOF_HDA_SPIB_CAP_ID: |
| dev_dbg(sdev->dev, "found SPIB capability at 0x%x\n", |
| offset); |
| bus->spbcap = bus->remap_addr + offset; |
| sdev->bar[HDA_DSP_SPIB_BAR] = bus->spbcap; |
| break; |
| case SOF_HDA_DRSM_CAP_ID: |
| dev_dbg(sdev->dev, "found DRSM capability at 0x%x\n", |
| offset); |
| bus->drsmcap = bus->remap_addr + offset; |
| sdev->bar[HDA_DSP_DRSM_BAR] = bus->drsmcap; |
| break; |
| case SOF_HDA_GTS_CAP_ID: |
| dev_dbg(sdev->dev, "found GTS capability at 0x%x\n", |
| offset); |
| bus->gtscap = bus->remap_addr + offset; |
| break; |
| case SOF_HDA_ML_CAP_ID: |
| dev_dbg(sdev->dev, "found ML capability at 0x%x\n", |
| offset); |
| bus->mlcap = bus->remap_addr + offset; |
| break; |
| default: |
| dev_vdbg(sdev->dev, "found capability %d at 0x%x\n", |
| feature, offset); |
| break; |
| } |
| |
| offset = cap & SOF_HDA_CAP_NEXT_MASK; |
| } while (count++ <= SOF_HDA_MAX_CAPS && offset); |
| |
| return 0; |
| } |
| |
| void hda_dsp_ctrl_ppcap_enable(struct snd_sof_dev *sdev, bool enable) |
| { |
| u32 val = enable ? SOF_HDA_PPCTL_GPROCEN : 0; |
| |
| snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR, SOF_HDA_REG_PP_PPCTL, |
| SOF_HDA_PPCTL_GPROCEN, val); |
| } |
| |
| void hda_dsp_ctrl_ppcap_int_enable(struct snd_sof_dev *sdev, bool enable) |
| { |
| u32 val = enable ? SOF_HDA_PPCTL_PIE : 0; |
| |
| snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR, SOF_HDA_REG_PP_PPCTL, |
| SOF_HDA_PPCTL_PIE, val); |
| } |
| |
| void hda_dsp_ctrl_misc_clock_gating(struct snd_sof_dev *sdev, bool enable) |
| { |
| u32 val = enable ? PCI_CGCTL_MISCBDCGE_MASK : 0; |
| |
| snd_sof_pci_update_bits(sdev, PCI_CGCTL, PCI_CGCTL_MISCBDCGE_MASK, val); |
| } |
| |
| /* |
| * enable/disable audio dsp clock gating and power gating bits. |
| * This allows the HW to opportunistically power and clock gate |
| * the audio dsp when it is idle |
| */ |
| int hda_dsp_ctrl_clock_power_gating(struct snd_sof_dev *sdev, bool enable) |
| { |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) |
| struct hdac_bus *bus = sof_to_bus(sdev); |
| #endif |
| u32 val; |
| |
| /* enable/disable audio dsp clock gating */ |
| val = enable ? PCI_CGCTL_ADSPDCGE : 0; |
| snd_sof_pci_update_bits(sdev, PCI_CGCTL, PCI_CGCTL_ADSPDCGE, val); |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) |
| /* enable/disable L1 support */ |
| val = enable ? SOF_HDA_VS_EM2_L1SEN : 0; |
| snd_hdac_chip_updatel(bus, VS_EM2, SOF_HDA_VS_EM2_L1SEN, val); |
| #endif |
| |
| /* enable/disable audio dsp power gating */ |
| val = enable ? 0 : PCI_PGCTL_ADSPPGD; |
| snd_sof_pci_update_bits(sdev, PCI_PGCTL, PCI_PGCTL_ADSPPGD, val); |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) |
| /* |
| * While performing reset, controller may not come back properly and causing |
| * issues, so recommendation is to set CGCTL.MISCBDCGE to 0 then do reset |
| * (init chip) and then again set CGCTL.MISCBDCGE to 1 |
| */ |
| int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev, bool full_reset) |
| { |
| struct hdac_bus *bus = sof_to_bus(sdev); |
| int ret; |
| |
| hda_dsp_ctrl_misc_clock_gating(sdev, false); |
| ret = snd_hdac_bus_init_chip(bus, full_reset); |
| hda_dsp_ctrl_misc_clock_gating(sdev, true); |
| |
| return ret; |
| } |
| #endif |