|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. | 
|  | * Copyright(c) 2015 Intel Deutschland GmbH | 
|  | * | 
|  | * Portions of this file are derived from the ipw3945 project, as well | 
|  | * as portions of the ieee80211 subsystem header files. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <linuxwifi@intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  |  | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | #include "iwl-eeprom-read.h" | 
|  | #include "iwl-eeprom-parse.h" | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-trans.h" | 
|  | #include "iwl-op-mode.h" | 
|  | #include "iwl-drv.h" | 
|  | #include "iwl-modparams.h" | 
|  | #include "iwl-prph.h" | 
|  |  | 
|  | #include "dev.h" | 
|  | #include "calib.h" | 
|  | #include "agn.h" | 
|  |  | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * module boiler plate | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | #define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link AGN driver for Linux" | 
|  | MODULE_DESCRIPTION(DRV_DESCRIPTION); | 
|  | MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* Please keep this array *SORTED* by hex value. | 
|  | * Access is done through binary search. | 
|  | * A warning will be triggered on violation. | 
|  | */ | 
|  | static const struct iwl_hcmd_names iwl_dvm_cmd_names[] = { | 
|  | HCMD_NAME(REPLY_ALIVE), | 
|  | HCMD_NAME(REPLY_ERROR), | 
|  | HCMD_NAME(REPLY_ECHO), | 
|  | HCMD_NAME(REPLY_RXON), | 
|  | HCMD_NAME(REPLY_RXON_ASSOC), | 
|  | HCMD_NAME(REPLY_QOS_PARAM), | 
|  | HCMD_NAME(REPLY_RXON_TIMING), | 
|  | HCMD_NAME(REPLY_ADD_STA), | 
|  | HCMD_NAME(REPLY_REMOVE_STA), | 
|  | HCMD_NAME(REPLY_REMOVE_ALL_STA), | 
|  | HCMD_NAME(REPLY_TX), | 
|  | HCMD_NAME(REPLY_TXFIFO_FLUSH), | 
|  | HCMD_NAME(REPLY_WEPKEY), | 
|  | HCMD_NAME(REPLY_LEDS_CMD), | 
|  | HCMD_NAME(REPLY_TX_LINK_QUALITY_CMD), | 
|  | HCMD_NAME(COEX_PRIORITY_TABLE_CMD), | 
|  | HCMD_NAME(COEX_MEDIUM_NOTIFICATION), | 
|  | HCMD_NAME(COEX_EVENT_CMD), | 
|  | HCMD_NAME(TEMPERATURE_NOTIFICATION), | 
|  | HCMD_NAME(CALIBRATION_CFG_CMD), | 
|  | HCMD_NAME(CALIBRATION_RES_NOTIFICATION), | 
|  | HCMD_NAME(CALIBRATION_COMPLETE_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_QUIET_CMD), | 
|  | HCMD_NAME(REPLY_CHANNEL_SWITCH), | 
|  | HCMD_NAME(CHANNEL_SWITCH_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_SPECTRUM_MEASUREMENT_CMD), | 
|  | HCMD_NAME(SPECTRUM_MEASURE_NOTIFICATION), | 
|  | HCMD_NAME(POWER_TABLE_CMD), | 
|  | HCMD_NAME(PM_SLEEP_NOTIFICATION), | 
|  | HCMD_NAME(PM_DEBUG_STATISTIC_NOTIFIC), | 
|  | HCMD_NAME(REPLY_SCAN_CMD), | 
|  | HCMD_NAME(REPLY_SCAN_ABORT_CMD), | 
|  | HCMD_NAME(SCAN_START_NOTIFICATION), | 
|  | HCMD_NAME(SCAN_RESULTS_NOTIFICATION), | 
|  | HCMD_NAME(SCAN_COMPLETE_NOTIFICATION), | 
|  | HCMD_NAME(BEACON_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_TX_BEACON), | 
|  | HCMD_NAME(WHO_IS_AWAKE_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_TX_POWER_DBM_CMD), | 
|  | HCMD_NAME(QUIET_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_TX_PWR_TABLE_CMD), | 
|  | HCMD_NAME(REPLY_TX_POWER_DBM_CMD_V1), | 
|  | HCMD_NAME(TX_ANT_CONFIGURATION_CMD), | 
|  | HCMD_NAME(MEASURE_ABORT_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_BT_CONFIG), | 
|  | HCMD_NAME(REPLY_STATISTICS_CMD), | 
|  | HCMD_NAME(STATISTICS_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_CARD_STATE_CMD), | 
|  | HCMD_NAME(CARD_STATE_NOTIFICATION), | 
|  | HCMD_NAME(MISSED_BEACONS_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_CT_KILL_CONFIG_CMD), | 
|  | HCMD_NAME(SENSITIVITY_CMD), | 
|  | HCMD_NAME(REPLY_PHY_CALIBRATION_CMD), | 
|  | HCMD_NAME(REPLY_WIPAN_PARAMS), | 
|  | HCMD_NAME(REPLY_WIPAN_RXON), | 
|  | HCMD_NAME(REPLY_WIPAN_RXON_TIMING), | 
|  | HCMD_NAME(REPLY_WIPAN_RXON_ASSOC), | 
|  | HCMD_NAME(REPLY_WIPAN_QOS_PARAM), | 
|  | HCMD_NAME(REPLY_WIPAN_WEPKEY), | 
|  | HCMD_NAME(REPLY_WIPAN_P2P_CHANNEL_SWITCH), | 
|  | HCMD_NAME(REPLY_WIPAN_NOA_NOTIFICATION), | 
|  | HCMD_NAME(REPLY_WIPAN_DEACTIVATION_COMPLETE), | 
|  | HCMD_NAME(REPLY_RX_PHY_CMD), | 
|  | HCMD_NAME(REPLY_RX_MPDU_CMD), | 
|  | HCMD_NAME(REPLY_RX), | 
|  | HCMD_NAME(REPLY_COMPRESSED_BA), | 
|  | HCMD_NAME(REPLY_BT_COEX_PRIO_TABLE), | 
|  | HCMD_NAME(REPLY_BT_COEX_PROT_ENV), | 
|  | HCMD_NAME(REPLY_BT_COEX_PROFILE_NOTIF), | 
|  | HCMD_NAME(REPLY_D3_CONFIG), | 
|  | HCMD_NAME(REPLY_WOWLAN_PATTERNS), | 
|  | HCMD_NAME(REPLY_WOWLAN_WAKEUP_FILTER), | 
|  | HCMD_NAME(REPLY_WOWLAN_TSC_RSC_PARAMS), | 
|  | HCMD_NAME(REPLY_WOWLAN_TKIP_PARAMS), | 
|  | HCMD_NAME(REPLY_WOWLAN_KEK_KCK_MATERIAL), | 
|  | HCMD_NAME(REPLY_WOWLAN_GET_STATUS), | 
|  | }; | 
|  |  | 
|  | static const struct iwl_hcmd_arr iwl_dvm_groups[] = { | 
|  | [0x0] = HCMD_ARR(iwl_dvm_cmd_names), | 
|  | }; | 
|  |  | 
|  | static const struct iwl_op_mode_ops iwl_dvm_ops; | 
|  |  | 
|  | void iwl_update_chain_flags(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  | if (ctx->active.rx_chain != ctx->staging.rx_chain) | 
|  | iwlagn_commit_rxon(priv, ctx); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ | 
|  | static void iwl_set_beacon_tim(struct iwl_priv *priv, | 
|  | struct iwl_tx_beacon_cmd *tx_beacon_cmd, | 
|  | u8 *beacon, u32 frame_size) | 
|  | { | 
|  | u16 tim_idx; | 
|  | struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; | 
|  |  | 
|  | /* | 
|  | * The index is relative to frame start but we start looking at the | 
|  | * variable-length part of the beacon. | 
|  | */ | 
|  | tim_idx = mgmt->u.beacon.variable - beacon; | 
|  |  | 
|  | /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ | 
|  | while ((tim_idx < (frame_size - 2)) && | 
|  | (beacon[tim_idx] != WLAN_EID_TIM)) | 
|  | tim_idx += beacon[tim_idx+1] + 2; | 
|  |  | 
|  | /* If TIM field was found, set variables */ | 
|  | if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { | 
|  | tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); | 
|  | tx_beacon_cmd->tim_size = beacon[tim_idx+1]; | 
|  | } else | 
|  | IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); | 
|  | } | 
|  |  | 
|  | int iwlagn_send_beacon_cmd(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_tx_beacon_cmd *tx_beacon_cmd; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = REPLY_TX_BEACON, | 
|  | }; | 
|  | struct ieee80211_tx_info *info; | 
|  | u32 frame_size; | 
|  | u32 rate_flags; | 
|  | u32 rate; | 
|  |  | 
|  | /* | 
|  | * We have to set up the TX command, the TX Beacon command, and the | 
|  | * beacon contents. | 
|  | */ | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (!priv->beacon_ctx) { | 
|  | IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(!priv->beacon_skb)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Allocate beacon command */ | 
|  | if (!priv->beacon_cmd) | 
|  | priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL); | 
|  | tx_beacon_cmd = priv->beacon_cmd; | 
|  | if (!tx_beacon_cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | frame_size = priv->beacon_skb->len; | 
|  |  | 
|  | /* Set up TX command fields */ | 
|  | tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); | 
|  | tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; | 
|  | tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; | 
|  | tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | | 
|  | TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; | 
|  |  | 
|  | /* Set up TX beacon command fields */ | 
|  | iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data, | 
|  | frame_size); | 
|  |  | 
|  | /* Set up packet rate and flags */ | 
|  | info = IEEE80211_SKB_CB(priv->beacon_skb); | 
|  |  | 
|  | /* | 
|  | * Let's set up the rate at least somewhat correctly; | 
|  | * it will currently not actually be used by the uCode, | 
|  | * it uses the broadcast station's rate instead. | 
|  | */ | 
|  | if (info->control.rates[0].idx < 0 || | 
|  | info->control.rates[0].flags & IEEE80211_TX_RC_MCS) | 
|  | rate = 0; | 
|  | else | 
|  | rate = info->control.rates[0].idx; | 
|  |  | 
|  | priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, | 
|  | priv->nvm_data->valid_tx_ant); | 
|  | rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); | 
|  |  | 
|  | /* In mac80211, rates for 5 GHz start at 0 */ | 
|  | if (info->band == NL80211_BAND_5GHZ) | 
|  | rate += IWL_FIRST_OFDM_RATE; | 
|  | else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE) | 
|  | rate_flags |= RATE_MCS_CCK_MSK; | 
|  |  | 
|  | tx_beacon_cmd->tx.rate_n_flags = | 
|  | iwl_hw_set_rate_n_flags(rate, rate_flags); | 
|  |  | 
|  | /* Submit command */ | 
|  | cmd.len[0] = sizeof(*tx_beacon_cmd); | 
|  | cmd.data[0] = tx_beacon_cmd; | 
|  | cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; | 
|  | cmd.len[1] = frame_size; | 
|  | cmd.data[1] = priv->beacon_skb->data; | 
|  | cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; | 
|  |  | 
|  | return iwl_dvm_send_cmd(priv, &cmd); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_beacon_update(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, beacon_update); | 
|  | struct sk_buff *beacon; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (!priv->beacon_ctx) { | 
|  | IWL_ERR(priv, "updating beacon w/o beacon context!\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { | 
|  | /* | 
|  | * The ucode will send beacon notifications even in | 
|  | * IBSS mode, but we don't want to process them. But | 
|  | * we need to defer the type check to here due to | 
|  | * requiring locking around the beacon_ctx access. | 
|  | */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ | 
|  | beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); | 
|  | if (!beacon) { | 
|  | IWL_ERR(priv, "update beacon failed -- keeping old\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* new beacon skb is allocated every time; dispose previous.*/ | 
|  | dev_kfree_skb(priv->beacon_skb); | 
|  |  | 
|  | priv->beacon_skb = beacon; | 
|  |  | 
|  | iwlagn_send_beacon_cmd(priv); | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_bt_runtime_config(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, bt_runtime_config); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | goto out; | 
|  |  | 
|  | /* dont send host command if rf-kill is on */ | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | goto out; | 
|  |  | 
|  | iwlagn_send_advance_bt_config(priv); | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_bt_full_concurrency(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, bt_full_concurrency); | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | goto out; | 
|  |  | 
|  | /* dont send host command if rf-kill is on */ | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | goto out; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", | 
|  | priv->bt_full_concurrent ? | 
|  | "full concurrency" : "3-wire"); | 
|  |  | 
|  | /* | 
|  | * LQ & RXON updated cmds must be sent before BT Config cmd | 
|  | * to avoid 3-wire collisions | 
|  | */ | 
|  | for_each_context(priv, ctx) { | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  | iwlagn_commit_rxon(priv, ctx); | 
|  | } | 
|  |  | 
|  | iwlagn_send_advance_bt_config(priv); | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) | 
|  | { | 
|  | struct iwl_statistics_cmd statistics_cmd = { | 
|  | .configuration_flags = | 
|  | clear ? IWL_STATS_CONF_CLEAR_STATS : 0, | 
|  | }; | 
|  |  | 
|  | if (flags & CMD_ASYNC) | 
|  | return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, | 
|  | CMD_ASYNC, | 
|  | sizeof(struct iwl_statistics_cmd), | 
|  | &statistics_cmd); | 
|  | else | 
|  | return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, 0, | 
|  | sizeof(struct iwl_statistics_cmd), | 
|  | &statistics_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_bg_statistics_periodic - Timer callback to queue statistics | 
|  | * | 
|  | * This callback is provided in order to send a statistics request. | 
|  | * | 
|  | * This timer function is continually reset to execute within | 
|  | * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION | 
|  | * was received.  We need to ensure we receive the statistics in order | 
|  | * to update the temperature used for calibrating the TXPOWER. | 
|  | */ | 
|  | static void iwl_bg_statistics_periodic(struct timer_list *t) | 
|  | { | 
|  | struct iwl_priv *priv = from_timer(priv, t, statistics_periodic); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | /* dont send host command if rf-kill is on */ | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | return; | 
|  |  | 
|  | iwl_send_statistics_request(priv, CMD_ASYNC, false); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, | 
|  | u32 start_idx, u32 num_events, | 
|  | u32 capacity, u32 mode) | 
|  | { | 
|  | u32 i; | 
|  | u32 ptr;        /* SRAM byte address of log data */ | 
|  | u32 ev, time, data; /* event log data */ | 
|  | unsigned long reg_flags; | 
|  |  | 
|  | if (mode == 0) | 
|  | ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); | 
|  | else | 
|  | ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); | 
|  |  | 
|  | /* Make sure device is powered up for SRAM reads */ | 
|  | if (!iwl_trans_grab_nic_access(priv->trans, ®_flags)) | 
|  | return; | 
|  |  | 
|  | /* Set starting address; reads will auto-increment */ | 
|  | iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr); | 
|  |  | 
|  | /* | 
|  | * Refuse to read more than would have fit into the log from | 
|  | * the current start_idx. This used to happen due to the race | 
|  | * described below, but now WARN because the code below should | 
|  | * prevent it from happening here. | 
|  | */ | 
|  | if (WARN_ON(num_events > capacity - start_idx)) | 
|  | num_events = capacity - start_idx; | 
|  |  | 
|  | /* | 
|  | * "time" is actually "data" for mode 0 (no timestamp). | 
|  | * place event id # at far right for easier visual parsing. | 
|  | */ | 
|  | for (i = 0; i < num_events; i++) { | 
|  | ev = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); | 
|  | time = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); | 
|  | if (mode == 0) { | 
|  | trace_iwlwifi_dev_ucode_cont_event( | 
|  | priv->trans->dev, 0, time, ev); | 
|  | } else { | 
|  | data = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); | 
|  | trace_iwlwifi_dev_ucode_cont_event( | 
|  | priv->trans->dev, time, data, ev); | 
|  | } | 
|  | } | 
|  | /* Allow device to power down */ | 
|  | iwl_trans_release_nic_access(priv->trans, ®_flags); | 
|  | } | 
|  |  | 
|  | static void iwl_continuous_event_trace(struct iwl_priv *priv) | 
|  | { | 
|  | u32 capacity;   /* event log capacity in # entries */ | 
|  | struct { | 
|  | u32 capacity; | 
|  | u32 mode; | 
|  | u32 wrap_counter; | 
|  | u32 write_counter; | 
|  | } __packed read; | 
|  | u32 base;       /* SRAM byte address of event log header */ | 
|  | u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */ | 
|  | u32 num_wraps;  /* # times uCode wrapped to top of log */ | 
|  | u32 next_entry; /* index of next entry to be written by uCode */ | 
|  |  | 
|  | base = priv->device_pointers.log_event_table; | 
|  | if (iwlagn_hw_valid_rtc_data_addr(base)) { | 
|  | iwl_trans_read_mem_bytes(priv->trans, base, | 
|  | &read, sizeof(read)); | 
|  | capacity = read.capacity; | 
|  | mode = read.mode; | 
|  | num_wraps = read.wrap_counter; | 
|  | next_entry = read.write_counter; | 
|  | } else | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Unfortunately, the uCode doesn't use temporary variables. | 
|  | * Therefore, it can happen that we read next_entry == capacity, | 
|  | * which really means next_entry == 0. | 
|  | */ | 
|  | if (unlikely(next_entry == capacity)) | 
|  | next_entry = 0; | 
|  | /* | 
|  | * Additionally, the uCode increases the write pointer before | 
|  | * the wraps counter, so if the write pointer is smaller than | 
|  | * the old write pointer (wrap occurred) but we read that no | 
|  | * wrap occurred, we actually read between the next_entry and | 
|  | * num_wraps update (this does happen in practice!!) -- take | 
|  | * that into account by increasing num_wraps. | 
|  | */ | 
|  | if (unlikely(next_entry < priv->event_log.next_entry && | 
|  | num_wraps == priv->event_log.num_wraps)) | 
|  | num_wraps++; | 
|  |  | 
|  | if (num_wraps == priv->event_log.num_wraps) { | 
|  | iwl_print_cont_event_trace( | 
|  | priv, base, priv->event_log.next_entry, | 
|  | next_entry - priv->event_log.next_entry, | 
|  | capacity, mode); | 
|  |  | 
|  | priv->event_log.non_wraps_count++; | 
|  | } else { | 
|  | if (num_wraps - priv->event_log.num_wraps > 1) | 
|  | priv->event_log.wraps_more_count++; | 
|  | else | 
|  | priv->event_log.wraps_once_count++; | 
|  |  | 
|  | trace_iwlwifi_dev_ucode_wrap_event(priv->trans->dev, | 
|  | num_wraps - priv->event_log.num_wraps, | 
|  | next_entry, priv->event_log.next_entry); | 
|  |  | 
|  | if (next_entry < priv->event_log.next_entry) { | 
|  | iwl_print_cont_event_trace( | 
|  | priv, base, priv->event_log.next_entry, | 
|  | capacity - priv->event_log.next_entry, | 
|  | capacity, mode); | 
|  |  | 
|  | iwl_print_cont_event_trace( | 
|  | priv, base, 0, next_entry, capacity, mode); | 
|  | } else { | 
|  | iwl_print_cont_event_trace( | 
|  | priv, base, next_entry, | 
|  | capacity - next_entry, | 
|  | capacity, mode); | 
|  |  | 
|  | iwl_print_cont_event_trace( | 
|  | priv, base, 0, next_entry, capacity, mode); | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->event_log.num_wraps = num_wraps; | 
|  | priv->event_log.next_entry = next_entry; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_bg_ucode_trace - Timer callback to log ucode event | 
|  | * | 
|  | * The timer is continually set to execute every | 
|  | * UCODE_TRACE_PERIOD milliseconds after the last timer expired | 
|  | * this function is to perform continuous uCode event logging operation | 
|  | * if enabled | 
|  | */ | 
|  | static void iwl_bg_ucode_trace(struct timer_list *t) | 
|  | { | 
|  | struct iwl_priv *priv = from_timer(priv, t, ucode_trace); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | if (priv->event_log.ucode_trace) { | 
|  | iwl_continuous_event_trace(priv); | 
|  | /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ | 
|  | mod_timer(&priv->ucode_trace, | 
|  | jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_bg_tx_flush(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = | 
|  | container_of(work, struct iwl_priv, tx_flush); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | /* do nothing if rf-kill is on */ | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | return; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); | 
|  | iwlagn_dev_txfifo_flush(priv); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * queue/FIFO/AC mapping definitions | 
|  | */ | 
|  |  | 
|  | static const u8 iwlagn_bss_ac_to_fifo[] = { | 
|  | IWL_TX_FIFO_VO, | 
|  | IWL_TX_FIFO_VI, | 
|  | IWL_TX_FIFO_BE, | 
|  | IWL_TX_FIFO_BK, | 
|  | }; | 
|  |  | 
|  | static const u8 iwlagn_bss_ac_to_queue[] = { | 
|  | 0, 1, 2, 3, | 
|  | }; | 
|  |  | 
|  | static const u8 iwlagn_pan_ac_to_fifo[] = { | 
|  | IWL_TX_FIFO_VO_IPAN, | 
|  | IWL_TX_FIFO_VI_IPAN, | 
|  | IWL_TX_FIFO_BE_IPAN, | 
|  | IWL_TX_FIFO_BK_IPAN, | 
|  | }; | 
|  |  | 
|  | static const u8 iwlagn_pan_ac_to_queue[] = { | 
|  | 7, 6, 5, 4, | 
|  | }; | 
|  |  | 
|  | static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * The default context is always valid, | 
|  | * the PAN context depends on uCode. | 
|  | */ | 
|  | priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); | 
|  | if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) | 
|  | priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN); | 
|  |  | 
|  | for (i = 0; i < NUM_IWL_RXON_CTX; i++) | 
|  | priv->contexts[i].ctxid = i; | 
|  |  | 
|  | priv->contexts[IWL_RXON_CTX_BSS].always_active = true; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].is_active = true; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = | 
|  | BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MONITOR); | 
|  | priv->contexts[IWL_RXON_CTX_BSS].interface_modes = | 
|  | BIT(NL80211_IFTYPE_STATION); | 
|  | priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; | 
|  | memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue, | 
|  | iwlagn_bss_ac_to_queue, sizeof(iwlagn_bss_ac_to_queue)); | 
|  | memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo, | 
|  | iwlagn_bss_ac_to_fifo, sizeof(iwlagn_bss_ac_to_fifo)); | 
|  |  | 
|  | priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = | 
|  | REPLY_WIPAN_RXON_TIMING; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = | 
|  | REPLY_WIPAN_RXON_ASSOC; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].interface_modes = | 
|  | BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); | 
|  |  | 
|  | priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; | 
|  | priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; | 
|  | memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue, | 
|  | iwlagn_pan_ac_to_queue, sizeof(iwlagn_pan_ac_to_queue)); | 
|  | memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo, | 
|  | iwlagn_pan_ac_to_fifo, sizeof(iwlagn_pan_ac_to_fifo)); | 
|  | priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE; | 
|  |  | 
|  | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | 
|  | } | 
|  |  | 
|  | static void iwl_rf_kill_ct_config(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_ct_kill_config cmd; | 
|  | struct iwl_ct_kill_throttling_config adv_cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, | 
|  | CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); | 
|  |  | 
|  | priv->thermal_throttle.ct_kill_toggle = false; | 
|  |  | 
|  | if (priv->lib->support_ct_kill_exit) { | 
|  | adv_cmd.critical_temperature_enter = | 
|  | cpu_to_le32(priv->hw_params.ct_kill_threshold); | 
|  | adv_cmd.critical_temperature_exit = | 
|  | cpu_to_le32(priv->hw_params.ct_kill_exit_threshold); | 
|  |  | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, | 
|  | REPLY_CT_KILL_CONFIG_CMD, | 
|  | 0, sizeof(adv_cmd), &adv_cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); | 
|  | else | 
|  | IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " | 
|  | "succeeded, critical temperature enter is %d," | 
|  | "exit is %d\n", | 
|  | priv->hw_params.ct_kill_threshold, | 
|  | priv->hw_params.ct_kill_exit_threshold); | 
|  | } else { | 
|  | cmd.critical_temperature_R = | 
|  | cpu_to_le32(priv->hw_params.ct_kill_threshold); | 
|  |  | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, | 
|  | REPLY_CT_KILL_CONFIG_CMD, | 
|  | 0, sizeof(cmd), &cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); | 
|  | else | 
|  | IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " | 
|  | "succeeded, " | 
|  | "critical temperature is %d\n", | 
|  | priv->hw_params.ct_kill_threshold); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) | 
|  | { | 
|  | struct iwl_calib_cfg_cmd calib_cfg_cmd; | 
|  | struct iwl_host_cmd cmd = { | 
|  | .id = CALIBRATION_CFG_CMD, | 
|  | .len = { sizeof(struct iwl_calib_cfg_cmd), }, | 
|  | .data = { &calib_cfg_cmd, }, | 
|  | }; | 
|  |  | 
|  | memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); | 
|  | calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL; | 
|  | calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); | 
|  |  | 
|  | return iwl_dvm_send_cmd(priv, &cmd); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) | 
|  | { | 
|  | struct iwl_tx_ant_config_cmd tx_ant_cmd = { | 
|  | .valid = cpu_to_le32(valid_tx_ant), | 
|  | }; | 
|  |  | 
|  | if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) { | 
|  | IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); | 
|  | return iwl_dvm_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD, 0, | 
|  | sizeof(struct iwl_tx_ant_config_cmd), | 
|  | &tx_ant_cmd); | 
|  | } else { | 
|  | IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_send_bt_config(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_bt_cmd bt_cmd = { | 
|  | .lead_time = BT_LEAD_TIME_DEF, | 
|  | .max_kill = BT_MAX_KILL_DEF, | 
|  | .kill_ack_mask = 0, | 
|  | .kill_cts_mask = 0, | 
|  | }; | 
|  |  | 
|  | if (!iwlwifi_mod_params.bt_coex_active) | 
|  | bt_cmd.flags = BT_COEX_DISABLE; | 
|  | else | 
|  | bt_cmd.flags = BT_COEX_ENABLE; | 
|  |  | 
|  | priv->bt_enable_flag = bt_cmd.flags; | 
|  | IWL_DEBUG_INFO(priv, "BT coex %s\n", | 
|  | (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); | 
|  |  | 
|  | if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, | 
|  | 0, sizeof(struct iwl_bt_cmd), &bt_cmd)) | 
|  | IWL_ERR(priv, "failed to send BT Coex Config\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_alive_start - called after REPLY_ALIVE notification received | 
|  | *                   from protocol/runtime uCode (initialization uCode's | 
|  | *                   Alive gets handled by iwl_init_alive_start()). | 
|  | */ | 
|  | int iwl_alive_start(struct iwl_priv *priv) | 
|  | { | 
|  | int ret = 0; | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); | 
|  |  | 
|  | /* After the ALIVE response, we can send host commands to the uCode */ | 
|  | set_bit(STATUS_ALIVE, &priv->status); | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) | 
|  | return -ERFKILL; | 
|  |  | 
|  | if (priv->event_log.ucode_trace) { | 
|  | /* start collecting data now */ | 
|  | mod_timer(&priv->ucode_trace, jiffies); | 
|  | } | 
|  |  | 
|  | /* download priority table before any calibration request */ | 
|  | if (priv->lib->bt_params && | 
|  | priv->lib->bt_params->advanced_bt_coexist) { | 
|  | /* Configure Bluetooth device coexistence support */ | 
|  | if (priv->lib->bt_params->bt_sco_disable) | 
|  | priv->bt_enable_pspoll = false; | 
|  | else | 
|  | priv->bt_enable_pspoll = true; | 
|  |  | 
|  | priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; | 
|  | priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; | 
|  | priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; | 
|  | iwlagn_send_advance_bt_config(priv); | 
|  | priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; | 
|  | priv->cur_rssi_ctx = NULL; | 
|  |  | 
|  | iwl_send_prio_tbl(priv); | 
|  |  | 
|  | /* FIXME: w/a to force change uCode BT state machine */ | 
|  | ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, | 
|  | BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, | 
|  | BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else if (priv->lib->bt_params) { | 
|  | /* | 
|  | * default is 2-wire BT coexexistence support | 
|  | */ | 
|  | iwl_send_bt_config(priv); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Perform runtime calibrations, including DC calibration. | 
|  | */ | 
|  | iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX); | 
|  |  | 
|  | ieee80211_wake_queues(priv->hw); | 
|  |  | 
|  | /* Configure Tx antenna selection based on H/W config */ | 
|  | iwlagn_send_tx_ant_config(priv, priv->nvm_data->valid_tx_ant); | 
|  |  | 
|  | if (iwl_is_associated_ctx(ctx) && !priv->wowlan) { | 
|  | struct iwl_rxon_cmd *active_rxon = | 
|  | (struct iwl_rxon_cmd *)&ctx->active; | 
|  | /* apply any changes in staging */ | 
|  | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | } else { | 
|  | struct iwl_rxon_context *tmp; | 
|  | /* Initialize our rx_config data */ | 
|  | for_each_context(priv, tmp) | 
|  | iwl_connection_init_rx_config(priv, tmp); | 
|  |  | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  | } | 
|  |  | 
|  | if (!priv->wowlan) { | 
|  | /* WoWLAN ucode will not reply in the same way, skip it */ | 
|  | iwl_reset_run_time_calib(priv); | 
|  | } | 
|  |  | 
|  | set_bit(STATUS_READY, &priv->status); | 
|  |  | 
|  | /* Configure the adapter for unassociated operation */ | 
|  | ret = iwlagn_commit_rxon(priv, ctx); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* At this point, the NIC is initialized and operational */ | 
|  | iwl_rf_kill_ct_config(priv); | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); | 
|  |  | 
|  | return iwl_power_update_mode(priv, true); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_clear_driver_stations - clear knowledge of all stations from driver | 
|  | * @priv: iwl priv struct | 
|  | * | 
|  | * This is called during iwl_down() to make sure that in the case | 
|  | * we're coming there from a hardware restart mac80211 will be | 
|  | * able to reconfigure stations -- if we're getting there in the | 
|  | * normal down flow then the stations will already be cleared. | 
|  | */ | 
|  | static void iwl_clear_driver_stations(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | spin_lock_bh(&priv->sta_lock); | 
|  | memset(priv->stations, 0, sizeof(priv->stations)); | 
|  | priv->num_stations = 0; | 
|  |  | 
|  | priv->ucode_key_table = 0; | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | /* | 
|  | * Remove all key information that is not stored as part | 
|  | * of station information since mac80211 may not have had | 
|  | * a chance to remove all the keys. When device is | 
|  | * reconfigured by mac80211 after an error all keys will | 
|  | * be reconfigured. | 
|  | */ | 
|  | memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys)); | 
|  | ctx->key_mapping_keys = 0; | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&priv->sta_lock); | 
|  | } | 
|  |  | 
|  | void iwl_down(struct iwl_priv *priv) | 
|  | { | 
|  | int exit_pending; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | iwl_scan_cancel_timeout(priv, 200); | 
|  |  | 
|  | exit_pending = | 
|  | test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | iwl_clear_ucode_stations(priv, NULL); | 
|  | iwl_dealloc_bcast_stations(priv); | 
|  | iwl_clear_driver_stations(priv); | 
|  |  | 
|  | /* reset BT coex data */ | 
|  | priv->bt_status = 0; | 
|  | priv->cur_rssi_ctx = NULL; | 
|  | priv->bt_is_sco = 0; | 
|  | if (priv->lib->bt_params) | 
|  | priv->bt_traffic_load = | 
|  | priv->lib->bt_params->bt_init_traffic_load; | 
|  | else | 
|  | priv->bt_traffic_load = 0; | 
|  | priv->bt_full_concurrent = false; | 
|  | priv->bt_ci_compliance = 0; | 
|  |  | 
|  | /* Wipe out the EXIT_PENDING status bit if we are not actually | 
|  | * exiting the module */ | 
|  | if (!exit_pending) | 
|  | clear_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | if (priv->mac80211_registered) | 
|  | ieee80211_stop_queues(priv->hw); | 
|  |  | 
|  | priv->ucode_loaded = false; | 
|  | iwl_trans_stop_device(priv->trans); | 
|  |  | 
|  | /* Set num_aux_in_flight must be done after the transport is stopped */ | 
|  | atomic_set(&priv->num_aux_in_flight, 0); | 
|  |  | 
|  | /* Clear out all status bits but a few that are stable across reset */ | 
|  | priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << | 
|  | STATUS_RF_KILL_HW | | 
|  | test_bit(STATUS_FW_ERROR, &priv->status) << | 
|  | STATUS_FW_ERROR | | 
|  | test_bit(STATUS_EXIT_PENDING, &priv->status) << | 
|  | STATUS_EXIT_PENDING; | 
|  |  | 
|  | dev_kfree_skb(priv->beacon_skb); | 
|  | priv->beacon_skb = NULL; | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * Workqueue callbacks | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static void iwl_bg_run_time_calib_work(struct work_struct *work) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(work, struct iwl_priv, | 
|  | run_time_calib_work); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status) || | 
|  | test_bit(STATUS_SCANNING, &priv->status)) { | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (priv->start_calib) { | 
|  | iwl_chain_noise_calibration(priv); | 
|  | iwl_sensitivity_calibration(priv); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | void iwlagn_prepare_restart(struct iwl_priv *priv) | 
|  | { | 
|  | bool bt_full_concurrent; | 
|  | u8 bt_ci_compliance; | 
|  | u8 bt_load; | 
|  | u8 bt_status; | 
|  | bool bt_is_sco; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | priv->is_open = 0; | 
|  |  | 
|  | /* | 
|  | * __iwl_down() will clear the BT status variables, | 
|  | * which is correct, but when we restart we really | 
|  | * want to keep them so restore them afterwards. | 
|  | * | 
|  | * The restart process will later pick them up and | 
|  | * re-configure the hw when we reconfigure the BT | 
|  | * command. | 
|  | */ | 
|  | bt_full_concurrent = priv->bt_full_concurrent; | 
|  | bt_ci_compliance = priv->bt_ci_compliance; | 
|  | bt_load = priv->bt_traffic_load; | 
|  | bt_status = priv->bt_status; | 
|  | bt_is_sco = priv->bt_is_sco; | 
|  |  | 
|  | iwl_down(priv); | 
|  |  | 
|  | priv->bt_full_concurrent = bt_full_concurrent; | 
|  | priv->bt_ci_compliance = bt_ci_compliance; | 
|  | priv->bt_traffic_load = bt_load; | 
|  | priv->bt_status = bt_status; | 
|  | priv->bt_is_sco = bt_is_sco; | 
|  |  | 
|  | /* reset aggregation queues */ | 
|  | for (i = IWLAGN_FIRST_AMPDU_QUEUE; i < IWL_MAX_HW_QUEUES; i++) | 
|  | priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; | 
|  | /* and stop counts */ | 
|  | for (i = 0; i < IWL_MAX_HW_QUEUES; i++) | 
|  | atomic_set(&priv->queue_stop_count[i], 0); | 
|  |  | 
|  | memset(priv->agg_q_alloc, 0, sizeof(priv->agg_q_alloc)); | 
|  | } | 
|  |  | 
|  | static void iwl_bg_restart(struct work_struct *data) | 
|  | { | 
|  | struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { | 
|  | mutex_lock(&priv->mutex); | 
|  | iwlagn_prepare_restart(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | iwl_cancel_deferred_work(priv); | 
|  | if (priv->mac80211_registered) | 
|  | ieee80211_restart_hw(priv->hw); | 
|  | else | 
|  | IWL_ERR(priv, | 
|  | "Cannot request restart before registrating with mac80211\n"); | 
|  | } else { | 
|  | WARN_ON(1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * driver setup and teardown | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static void iwl_setup_deferred_work(struct iwl_priv *priv) | 
|  | { | 
|  | priv->workqueue = alloc_ordered_workqueue(DRV_NAME, 0); | 
|  |  | 
|  | INIT_WORK(&priv->restart, iwl_bg_restart); | 
|  | INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); | 
|  | INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); | 
|  | INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); | 
|  | INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); | 
|  | INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); | 
|  |  | 
|  | iwl_setup_scan_deferred_work(priv); | 
|  |  | 
|  | if (priv->lib->bt_params) | 
|  | iwlagn_bt_setup_deferred_work(priv); | 
|  |  | 
|  | timer_setup(&priv->statistics_periodic, iwl_bg_statistics_periodic, 0); | 
|  |  | 
|  | timer_setup(&priv->ucode_trace, iwl_bg_ucode_trace, 0); | 
|  | } | 
|  |  | 
|  | void iwl_cancel_deferred_work(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->lib->bt_params) | 
|  | iwlagn_bt_cancel_deferred_work(priv); | 
|  |  | 
|  | cancel_work_sync(&priv->run_time_calib_work); | 
|  | cancel_work_sync(&priv->beacon_update); | 
|  |  | 
|  | iwl_cancel_scan_deferred_work(priv); | 
|  |  | 
|  | cancel_work_sync(&priv->bt_full_concurrency); | 
|  | cancel_work_sync(&priv->bt_runtime_config); | 
|  |  | 
|  | del_timer_sync(&priv->statistics_periodic); | 
|  | del_timer_sync(&priv->ucode_trace); | 
|  | } | 
|  |  | 
|  | static int iwl_init_drv(struct iwl_priv *priv) | 
|  | { | 
|  | spin_lock_init(&priv->sta_lock); | 
|  |  | 
|  | mutex_init(&priv->mutex); | 
|  |  | 
|  | INIT_LIST_HEAD(&priv->calib_results); | 
|  |  | 
|  | priv->band = NL80211_BAND_2GHZ; | 
|  |  | 
|  | priv->plcp_delta_threshold = priv->lib->plcp_delta_threshold; | 
|  |  | 
|  | priv->iw_mode = NL80211_IFTYPE_STATION; | 
|  | priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; | 
|  | priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; | 
|  | priv->agg_tids_count = 0; | 
|  |  | 
|  | priv->rx_statistics_jiffies = jiffies; | 
|  |  | 
|  | /* Choose which receivers/antennas to use */ | 
|  | iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]); | 
|  |  | 
|  | iwl_init_scan_params(priv); | 
|  |  | 
|  | /* init bt coex */ | 
|  | if (priv->lib->bt_params && | 
|  | priv->lib->bt_params->advanced_bt_coexist) { | 
|  | priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; | 
|  | priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; | 
|  | priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; | 
|  | priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; | 
|  | priv->bt_duration = BT_DURATION_LIMIT_DEF; | 
|  | priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwl_uninit_drv(struct iwl_priv *priv) | 
|  | { | 
|  | kfree(priv->scan_cmd); | 
|  | kfree(priv->beacon_cmd); | 
|  | kfree(rcu_dereference_raw(priv->noa_data)); | 
|  | iwl_calib_free_results(priv); | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | kfree(priv->wowlan_sram); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void iwl_set_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->cfg->ht_params) | 
|  | priv->hw_params.use_rts_for_aggregation = | 
|  | priv->cfg->ht_params->use_rts_for_aggregation; | 
|  |  | 
|  | /* Device-specific setup */ | 
|  | priv->lib->set_hw_params(priv); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* show what optional capabilities we have */ | 
|  | static void iwl_option_config(struct iwl_priv *priv) | 
|  | { | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n"); | 
|  | #else | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n"); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n"); | 
|  | #else | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n"); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEVICE_TRACING | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n"); | 
|  | #else | 
|  | IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n"); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static int iwl_eeprom_init_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_nvm_data *data = priv->nvm_data; | 
|  |  | 
|  | if (data->sku_cap_11n_enable && | 
|  | !priv->cfg->ht_params) { | 
|  | IWL_ERR(priv, "Invalid 11n configuration\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!data->sku_cap_11n_enable && !data->sku_cap_band_24ghz_enable && | 
|  | !data->sku_cap_band_52ghz_enable) { | 
|  | IWL_ERR(priv, "Invalid device sku\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, | 
|  | "Device SKU: 24GHz %s %s, 52GHz %s %s, 11.n %s %s\n", | 
|  | data->sku_cap_band_24ghz_enable ? "" : "NOT", "enabled", | 
|  | data->sku_cap_band_52ghz_enable ? "" : "NOT", "enabled", | 
|  | data->sku_cap_11n_enable ? "" : "NOT", "enabled"); | 
|  |  | 
|  | priv->hw_params.tx_chains_num = | 
|  | num_of_ant(data->valid_tx_ant); | 
|  | if (priv->cfg->rx_with_siso_diversity) | 
|  | priv->hw_params.rx_chains_num = 1; | 
|  | else | 
|  | priv->hw_params.rx_chains_num = | 
|  | num_of_ant(data->valid_rx_ant); | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n", | 
|  | data->valid_tx_ant, | 
|  | data->valid_rx_ant); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, | 
|  | const struct iwl_cfg *cfg, | 
|  | const struct iwl_fw *fw, | 
|  | struct dentry *dbgfs_dir) | 
|  | { | 
|  | struct iwl_priv *priv; | 
|  | struct ieee80211_hw *hw; | 
|  | struct iwl_op_mode *op_mode; | 
|  | u16 num_mac; | 
|  | u32 ucode_flags; | 
|  | struct iwl_trans_config trans_cfg = {}; | 
|  | static const u8 no_reclaim_cmds[] = { | 
|  | REPLY_RX_PHY_CMD, | 
|  | REPLY_RX_MPDU_CMD, | 
|  | REPLY_COMPRESSED_BA, | 
|  | STATISTICS_NOTIFICATION, | 
|  | REPLY_TX, | 
|  | }; | 
|  | int i; | 
|  |  | 
|  | /************************ | 
|  | * 1. Allocating HW data | 
|  | ************************/ | 
|  | hw = iwl_alloc_all(); | 
|  | if (!hw) { | 
|  | pr_err("%s: Cannot allocate network device\n", cfg->name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | op_mode = hw->priv; | 
|  | op_mode->ops = &iwl_dvm_ops; | 
|  | priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  | priv->trans = trans; | 
|  | priv->dev = trans->dev; | 
|  | priv->cfg = cfg; | 
|  | priv->fw = fw; | 
|  |  | 
|  | switch (priv->cfg->device_family) { | 
|  | case IWL_DEVICE_FAMILY_1000: | 
|  | case IWL_DEVICE_FAMILY_100: | 
|  | priv->lib = &iwl_dvm_1000_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_2000: | 
|  | priv->lib = &iwl_dvm_2000_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_105: | 
|  | priv->lib = &iwl_dvm_105_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_2030: | 
|  | case IWL_DEVICE_FAMILY_135: | 
|  | priv->lib = &iwl_dvm_2030_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_5000: | 
|  | priv->lib = &iwl_dvm_5000_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_5150: | 
|  | priv->lib = &iwl_dvm_5150_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_6000: | 
|  | case IWL_DEVICE_FAMILY_6000i: | 
|  | priv->lib = &iwl_dvm_6000_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_6005: | 
|  | priv->lib = &iwl_dvm_6005_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_6050: | 
|  | case IWL_DEVICE_FAMILY_6150: | 
|  | priv->lib = &iwl_dvm_6050_cfg; | 
|  | break; | 
|  | case IWL_DEVICE_FAMILY_6030: | 
|  | priv->lib = &iwl_dvm_6030_cfg; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(!priv->lib)) | 
|  | goto out_free_hw; | 
|  |  | 
|  | /* | 
|  | * Populate the state variables that the transport layer needs | 
|  | * to know about. | 
|  | */ | 
|  | trans_cfg.op_mode = op_mode; | 
|  | trans_cfg.no_reclaim_cmds = no_reclaim_cmds; | 
|  | trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds); | 
|  |  | 
|  | switch (iwlwifi_mod_params.amsdu_size) { | 
|  | case IWL_AMSDU_DEF: | 
|  | case IWL_AMSDU_4K: | 
|  | trans_cfg.rx_buf_size = IWL_AMSDU_4K; | 
|  | break; | 
|  | case IWL_AMSDU_8K: | 
|  | trans_cfg.rx_buf_size = IWL_AMSDU_8K; | 
|  | break; | 
|  | case IWL_AMSDU_12K: | 
|  | default: | 
|  | trans_cfg.rx_buf_size = IWL_AMSDU_4K; | 
|  | pr_err("Unsupported amsdu_size: %d\n", | 
|  | iwlwifi_mod_params.amsdu_size); | 
|  | } | 
|  |  | 
|  | trans_cfg.cmd_q_wdg_timeout = IWL_WATCHDOG_DISABLED; | 
|  |  | 
|  | trans_cfg.command_groups = iwl_dvm_groups; | 
|  | trans_cfg.command_groups_size = ARRAY_SIZE(iwl_dvm_groups); | 
|  |  | 
|  | trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM; | 
|  | trans_cfg.cb_data_offs = offsetof(struct ieee80211_tx_info, | 
|  | driver_data[2]); | 
|  |  | 
|  | WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE < | 
|  | priv->cfg->base_params->num_of_queues); | 
|  |  | 
|  | ucode_flags = fw->ucode_capa.flags; | 
|  |  | 
|  | if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) { | 
|  | priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; | 
|  | trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; | 
|  | } else { | 
|  | priv->sta_key_max_num = STA_KEY_MAX_NUM; | 
|  | trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; | 
|  | } | 
|  |  | 
|  | /* Configure transport layer */ | 
|  | iwl_trans_configure(priv->trans, &trans_cfg); | 
|  |  | 
|  | trans->rx_mpdu_cmd = REPLY_RX_MPDU_CMD; | 
|  | trans->rx_mpdu_cmd_hdr_size = sizeof(struct iwl_rx_mpdu_res_start); | 
|  | trans->command_groups = trans_cfg.command_groups; | 
|  | trans->command_groups_size = trans_cfg.command_groups_size; | 
|  |  | 
|  | /* At this point both hw and priv are allocated. */ | 
|  |  | 
|  | SET_IEEE80211_DEV(priv->hw, priv->trans->dev); | 
|  |  | 
|  | iwl_option_config(priv); | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); | 
|  |  | 
|  | /* is antenna coupling more than 35dB ? */ | 
|  | priv->bt_ant_couple_ok = | 
|  | (iwlwifi_mod_params.antenna_coupling > | 
|  | IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? | 
|  | true : false; | 
|  |  | 
|  | /* bt channel inhibition enabled*/ | 
|  | priv->bt_ch_announce = true; | 
|  | IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", | 
|  | (priv->bt_ch_announce) ? "On" : "Off"); | 
|  |  | 
|  | /* these spin locks will be used in apm_ops.init and EEPROM access | 
|  | * we should init now | 
|  | */ | 
|  | spin_lock_init(&priv->statistics.lock); | 
|  |  | 
|  | /*********************** | 
|  | * 2. Read REV register | 
|  | ***********************/ | 
|  | IWL_INFO(priv, "Detected %s, REV=0x%X\n", | 
|  | priv->cfg->name, priv->trans->hw_rev); | 
|  |  | 
|  | if (iwl_trans_start_hw(priv->trans)) | 
|  | goto out_free_hw; | 
|  |  | 
|  | /* Read the EEPROM */ | 
|  | if (iwl_read_eeprom(priv->trans, &priv->eeprom_blob, | 
|  | &priv->eeprom_blob_size)) { | 
|  | IWL_ERR(priv, "Unable to init EEPROM\n"); | 
|  | goto out_free_hw; | 
|  | } | 
|  |  | 
|  | /* Reset chip to save power until we load uCode during "up". */ | 
|  | iwl_trans_stop_device(priv->trans); | 
|  |  | 
|  | priv->nvm_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg, | 
|  | priv->eeprom_blob, | 
|  | priv->eeprom_blob_size); | 
|  | if (!priv->nvm_data) | 
|  | goto out_free_eeprom_blob; | 
|  |  | 
|  | if (iwl_nvm_check_version(priv->nvm_data, priv->trans)) | 
|  | goto out_free_eeprom; | 
|  |  | 
|  | if (iwl_eeprom_init_hw_params(priv)) | 
|  | goto out_free_eeprom; | 
|  |  | 
|  | /* extract MAC Address */ | 
|  | memcpy(priv->addresses[0].addr, priv->nvm_data->hw_addr, ETH_ALEN); | 
|  | IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); | 
|  | priv->hw->wiphy->addresses = priv->addresses; | 
|  | priv->hw->wiphy->n_addresses = 1; | 
|  | num_mac = priv->nvm_data->n_hw_addrs; | 
|  | if (num_mac > 1) { | 
|  | memcpy(priv->addresses[1].addr, priv->addresses[0].addr, | 
|  | ETH_ALEN); | 
|  | priv->addresses[1].addr[5]++; | 
|  | priv->hw->wiphy->n_addresses++; | 
|  | } | 
|  |  | 
|  | /************************ | 
|  | * 4. Setup HW constants | 
|  | ************************/ | 
|  | iwl_set_hw_params(priv); | 
|  |  | 
|  | if (!(priv->nvm_data->sku_cap_ipan_enable)) { | 
|  | IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN\n"); | 
|  | ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; | 
|  | /* | 
|  | * if not PAN, then don't support P2P -- might be a uCode | 
|  | * packaging bug or due to the eeprom check above | 
|  | */ | 
|  | priv->sta_key_max_num = STA_KEY_MAX_NUM; | 
|  | trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; | 
|  |  | 
|  | /* Configure transport layer again*/ | 
|  | iwl_trans_configure(priv->trans, &trans_cfg); | 
|  | } | 
|  |  | 
|  | /******************* | 
|  | * 5. Setup priv | 
|  | *******************/ | 
|  | for (i = 0; i < IWL_MAX_HW_QUEUES; i++) { | 
|  | priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; | 
|  | if (i < IWLAGN_FIRST_AMPDU_QUEUE && | 
|  | i != IWL_DEFAULT_CMD_QUEUE_NUM && | 
|  | i != IWL_IPAN_CMD_QUEUE_NUM) | 
|  | priv->queue_to_mac80211[i] = i; | 
|  | atomic_set(&priv->queue_stop_count[i], 0); | 
|  | } | 
|  |  | 
|  | if (iwl_init_drv(priv)) | 
|  | goto out_free_eeprom; | 
|  |  | 
|  | /* At this point both hw and priv are initialized. */ | 
|  |  | 
|  | /******************** | 
|  | * 6. Setup services | 
|  | ********************/ | 
|  | iwl_setup_deferred_work(priv); | 
|  | iwl_setup_rx_handlers(priv); | 
|  |  | 
|  | iwl_power_initialize(priv); | 
|  | iwl_tt_initialize(priv); | 
|  |  | 
|  | snprintf(priv->hw->wiphy->fw_version, | 
|  | sizeof(priv->hw->wiphy->fw_version), | 
|  | "%s", fw->fw_version); | 
|  |  | 
|  | priv->new_scan_threshold_behaviour = | 
|  | !!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN); | 
|  |  | 
|  | priv->phy_calib_chain_noise_reset_cmd = | 
|  | fw->ucode_capa.standard_phy_calibration_size; | 
|  | priv->phy_calib_chain_noise_gain_cmd = | 
|  | fw->ucode_capa.standard_phy_calibration_size + 1; | 
|  |  | 
|  | /* initialize all valid contexts */ | 
|  | iwl_init_context(priv, ucode_flags); | 
|  |  | 
|  | /************************************************** | 
|  | * This is still part of probe() in a sense... | 
|  | * | 
|  | * 7. Setup and register with mac80211 and debugfs | 
|  | **************************************************/ | 
|  | if (iwlagn_mac_setup_register(priv, &fw->ucode_capa)) | 
|  | goto out_destroy_workqueue; | 
|  |  | 
|  | if (iwl_dbgfs_register(priv, dbgfs_dir)) | 
|  | goto out_mac80211_unregister; | 
|  |  | 
|  | return op_mode; | 
|  |  | 
|  | out_mac80211_unregister: | 
|  | iwlagn_mac_unregister(priv); | 
|  | out_destroy_workqueue: | 
|  | iwl_tt_exit(priv); | 
|  | iwl_cancel_deferred_work(priv); | 
|  | destroy_workqueue(priv->workqueue); | 
|  | priv->workqueue = NULL; | 
|  | iwl_uninit_drv(priv); | 
|  | out_free_eeprom_blob: | 
|  | kfree(priv->eeprom_blob); | 
|  | out_free_eeprom: | 
|  | kfree(priv->nvm_data); | 
|  | out_free_hw: | 
|  | ieee80211_free_hw(priv->hw); | 
|  | out: | 
|  | op_mode = NULL; | 
|  | return op_mode; | 
|  | } | 
|  |  | 
|  | static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); | 
|  |  | 
|  | iwlagn_mac_unregister(priv); | 
|  |  | 
|  | iwl_tt_exit(priv); | 
|  |  | 
|  | kfree(priv->eeprom_blob); | 
|  | kfree(priv->nvm_data); | 
|  |  | 
|  | /*netif_stop_queue(dev); */ | 
|  | flush_workqueue(priv->workqueue); | 
|  |  | 
|  | /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes | 
|  | * priv->workqueue... so we can't take down the workqueue | 
|  | * until now... */ | 
|  | destroy_workqueue(priv->workqueue); | 
|  | priv->workqueue = NULL; | 
|  |  | 
|  | iwl_uninit_drv(priv); | 
|  |  | 
|  | dev_kfree_skb(priv->beacon_skb); | 
|  |  | 
|  | iwl_trans_op_mode_leave(priv->trans); | 
|  | ieee80211_free_hw(priv->hw); | 
|  | } | 
|  |  | 
|  | static const char * const desc_lookup_text[] = { | 
|  | "OK", | 
|  | "FAIL", | 
|  | "BAD_PARAM", | 
|  | "BAD_CHECKSUM", | 
|  | "NMI_INTERRUPT_WDG", | 
|  | "SYSASSERT", | 
|  | "FATAL_ERROR", | 
|  | "BAD_COMMAND", | 
|  | "HW_ERROR_TUNE_LOCK", | 
|  | "HW_ERROR_TEMPERATURE", | 
|  | "ILLEGAL_CHAN_FREQ", | 
|  | "VCC_NOT_STABLE", | 
|  | "FH_ERROR", | 
|  | "NMI_INTERRUPT_HOST", | 
|  | "NMI_INTERRUPT_ACTION_PT", | 
|  | "NMI_INTERRUPT_UNKNOWN", | 
|  | "UCODE_VERSION_MISMATCH", | 
|  | "HW_ERROR_ABS_LOCK", | 
|  | "HW_ERROR_CAL_LOCK_FAIL", | 
|  | "NMI_INTERRUPT_INST_ACTION_PT", | 
|  | "NMI_INTERRUPT_DATA_ACTION_PT", | 
|  | "NMI_TRM_HW_ER", | 
|  | "NMI_INTERRUPT_TRM", | 
|  | "NMI_INTERRUPT_BREAK_POINT", | 
|  | "DEBUG_0", | 
|  | "DEBUG_1", | 
|  | "DEBUG_2", | 
|  | "DEBUG_3", | 
|  | }; | 
|  |  | 
|  | static struct { char *name; u8 num; } advanced_lookup[] = { | 
|  | { "NMI_INTERRUPT_WDG", 0x34 }, | 
|  | { "SYSASSERT", 0x35 }, | 
|  | { "UCODE_VERSION_MISMATCH", 0x37 }, | 
|  | { "BAD_COMMAND", 0x38 }, | 
|  | { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, | 
|  | { "FATAL_ERROR", 0x3D }, | 
|  | { "NMI_TRM_HW_ERR", 0x46 }, | 
|  | { "NMI_INTERRUPT_TRM", 0x4C }, | 
|  | { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, | 
|  | { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, | 
|  | { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, | 
|  | { "NMI_INTERRUPT_HOST", 0x66 }, | 
|  | { "NMI_INTERRUPT_ACTION_PT", 0x7C }, | 
|  | { "NMI_INTERRUPT_UNKNOWN", 0x84 }, | 
|  | { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, | 
|  | { "ADVANCED_SYSASSERT", 0 }, | 
|  | }; | 
|  |  | 
|  | static const char *desc_lookup(u32 num) | 
|  | { | 
|  | int i; | 
|  | int max = ARRAY_SIZE(desc_lookup_text); | 
|  |  | 
|  | if (num < max) | 
|  | return desc_lookup_text[num]; | 
|  |  | 
|  | max = ARRAY_SIZE(advanced_lookup) - 1; | 
|  | for (i = 0; i < max; i++) { | 
|  | if (advanced_lookup[i].num == num) | 
|  | break; | 
|  | } | 
|  | return advanced_lookup[i].name; | 
|  | } | 
|  |  | 
|  | #define ERROR_START_OFFSET  (1 * sizeof(u32)) | 
|  | #define ERROR_ELEM_SIZE     (7 * sizeof(u32)) | 
|  |  | 
|  | static void iwl_dump_nic_error_log(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_trans *trans = priv->trans; | 
|  | u32 base; | 
|  | struct iwl_error_event_table table; | 
|  |  | 
|  | base = priv->device_pointers.error_event_table; | 
|  | if (priv->cur_ucode == IWL_UCODE_INIT) { | 
|  | if (!base) | 
|  | base = priv->fw->init_errlog_ptr; | 
|  | } else { | 
|  | if (!base) | 
|  | base = priv->fw->inst_errlog_ptr; | 
|  | } | 
|  |  | 
|  | if (!iwlagn_hw_valid_rtc_data_addr(base)) { | 
|  | IWL_ERR(priv, | 
|  | "Not valid error log pointer 0x%08X for %s uCode\n", | 
|  | base, | 
|  | (priv->cur_ucode == IWL_UCODE_INIT) | 
|  | ? "Init" : "RT"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /*TODO: Update dbgfs with ISR error stats obtained below */ | 
|  | iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table)); | 
|  |  | 
|  | if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { | 
|  | IWL_ERR(trans, "Start IWL Error Log Dump:\n"); | 
|  | IWL_ERR(trans, "Status: 0x%08lX, count: %d\n", | 
|  | priv->status, table.valid); | 
|  | } | 
|  |  | 
|  | trace_iwlwifi_dev_ucode_error(trans->dev, &table, 0, table.brd_ver); | 
|  | IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id, | 
|  | desc_lookup(table.error_id)); | 
|  | IWL_ERR(priv, "0x%08X | uPc\n", table.pc); | 
|  | IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1); | 
|  | IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2); | 
|  | IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1); | 
|  | IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2); | 
|  | IWL_ERR(priv, "0x%08X | data1\n", table.data1); | 
|  | IWL_ERR(priv, "0x%08X | data2\n", table.data2); | 
|  | IWL_ERR(priv, "0x%08X | line\n", table.line); | 
|  | IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time); | 
|  | IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low); | 
|  | IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi); | 
|  | IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1); | 
|  | IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2); | 
|  | IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3); | 
|  | IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver); | 
|  | IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver); | 
|  | IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver); | 
|  | IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd); | 
|  | IWL_ERR(priv, "0x%08X | isr0\n", table.isr0); | 
|  | IWL_ERR(priv, "0x%08X | isr1\n", table.isr1); | 
|  | IWL_ERR(priv, "0x%08X | isr2\n", table.isr2); | 
|  | IWL_ERR(priv, "0x%08X | isr3\n", table.isr3); | 
|  | IWL_ERR(priv, "0x%08X | isr4\n", table.isr4); | 
|  | IWL_ERR(priv, "0x%08X | isr_pref\n", table.isr_pref); | 
|  | IWL_ERR(priv, "0x%08X | wait_event\n", table.wait_event); | 
|  | IWL_ERR(priv, "0x%08X | l2p_control\n", table.l2p_control); | 
|  | IWL_ERR(priv, "0x%08X | l2p_duration\n", table.l2p_duration); | 
|  | IWL_ERR(priv, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid); | 
|  | IWL_ERR(priv, "0x%08X | l2p_addr_match\n", table.l2p_addr_match); | 
|  | IWL_ERR(priv, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel); | 
|  | IWL_ERR(priv, "0x%08X | timestamp\n", table.u_timestamp); | 
|  | IWL_ERR(priv, "0x%08X | flow_handler\n", table.flow_handler); | 
|  | } | 
|  |  | 
|  | #define EVENT_START_OFFSET  (4 * sizeof(u32)) | 
|  |  | 
|  | /** | 
|  | * iwl_print_event_log - Dump error event log to syslog | 
|  | * | 
|  | */ | 
|  | static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, | 
|  | u32 num_events, u32 mode, | 
|  | int pos, char **buf, size_t bufsz) | 
|  | { | 
|  | u32 i; | 
|  | u32 base;       /* SRAM byte address of event log header */ | 
|  | u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ | 
|  | u32 ptr;        /* SRAM byte address of log data */ | 
|  | u32 ev, time, data; /* event log data */ | 
|  | unsigned long reg_flags; | 
|  |  | 
|  | struct iwl_trans *trans = priv->trans; | 
|  |  | 
|  | if (num_events == 0) | 
|  | return pos; | 
|  |  | 
|  | base = priv->device_pointers.log_event_table; | 
|  | if (priv->cur_ucode == IWL_UCODE_INIT) { | 
|  | if (!base) | 
|  | base = priv->fw->init_evtlog_ptr; | 
|  | } else { | 
|  | if (!base) | 
|  | base = priv->fw->inst_evtlog_ptr; | 
|  | } | 
|  |  | 
|  | if (mode == 0) | 
|  | event_size = 2 * sizeof(u32); | 
|  | else | 
|  | event_size = 3 * sizeof(u32); | 
|  |  | 
|  | ptr = base + EVENT_START_OFFSET + (start_idx * event_size); | 
|  |  | 
|  | /* Make sure device is powered up for SRAM reads */ | 
|  | if (!iwl_trans_grab_nic_access(trans, ®_flags)) | 
|  | return pos; | 
|  |  | 
|  | /* Set starting address; reads will auto-increment */ | 
|  | iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr); | 
|  |  | 
|  | /* "time" is actually "data" for mode 0 (no timestamp). | 
|  | * place event id # at far right for easier visual parsing. */ | 
|  | for (i = 0; i < num_events; i++) { | 
|  | ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT); | 
|  | time = iwl_read32(trans, HBUS_TARG_MEM_RDAT); | 
|  | if (mode == 0) { | 
|  | /* data, ev */ | 
|  | if (bufsz) { | 
|  | pos += scnprintf(*buf + pos, bufsz - pos, | 
|  | "EVT_LOG:0x%08x:%04u\n", | 
|  | time, ev); | 
|  | } else { | 
|  | trace_iwlwifi_dev_ucode_event(trans->dev, 0, | 
|  | time, ev); | 
|  | IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", | 
|  | time, ev); | 
|  | } | 
|  | } else { | 
|  | data = iwl_read32(trans, HBUS_TARG_MEM_RDAT); | 
|  | if (bufsz) { | 
|  | pos += scnprintf(*buf + pos, bufsz - pos, | 
|  | "EVT_LOGT:%010u:0x%08x:%04u\n", | 
|  | time, data, ev); | 
|  | } else { | 
|  | IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", | 
|  | time, data, ev); | 
|  | trace_iwlwifi_dev_ucode_event(trans->dev, time, | 
|  | data, ev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Allow device to power down */ | 
|  | iwl_trans_release_nic_access(trans, ®_flags); | 
|  | return pos; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_print_last_event_logs - Dump the newest # of event log to syslog | 
|  | */ | 
|  | static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity, | 
|  | u32 num_wraps, u32 next_entry, | 
|  | u32 size, u32 mode, | 
|  | int pos, char **buf, size_t bufsz) | 
|  | { | 
|  | /* | 
|  | * display the newest DEFAULT_LOG_ENTRIES entries | 
|  | * i.e the entries just before the next ont that uCode would fill. | 
|  | */ | 
|  | if (num_wraps) { | 
|  | if (next_entry < size) { | 
|  | pos = iwl_print_event_log(priv, | 
|  | capacity - (size - next_entry), | 
|  | size - next_entry, mode, | 
|  | pos, buf, bufsz); | 
|  | pos = iwl_print_event_log(priv, 0, | 
|  | next_entry, mode, | 
|  | pos, buf, bufsz); | 
|  | } else | 
|  | pos = iwl_print_event_log(priv, next_entry - size, | 
|  | size, mode, pos, buf, bufsz); | 
|  | } else { | 
|  | if (next_entry < size) { | 
|  | pos = iwl_print_event_log(priv, 0, next_entry, | 
|  | mode, pos, buf, bufsz); | 
|  | } else { | 
|  | pos = iwl_print_event_log(priv, next_entry - size, | 
|  | size, mode, pos, buf, bufsz); | 
|  | } | 
|  | } | 
|  | return pos; | 
|  | } | 
|  |  | 
|  | #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20) | 
|  |  | 
|  | int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, | 
|  | char **buf) | 
|  | { | 
|  | u32 base;       /* SRAM byte address of event log header */ | 
|  | u32 capacity;   /* event log capacity in # entries */ | 
|  | u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */ | 
|  | u32 num_wraps;  /* # times uCode wrapped to top of log */ | 
|  | u32 next_entry; /* index of next entry to be written by uCode */ | 
|  | u32 size;       /* # entries that we'll print */ | 
|  | u32 logsize; | 
|  | int pos = 0; | 
|  | size_t bufsz = 0; | 
|  | struct iwl_trans *trans = priv->trans; | 
|  |  | 
|  | base = priv->device_pointers.log_event_table; | 
|  | if (priv->cur_ucode == IWL_UCODE_INIT) { | 
|  | logsize = priv->fw->init_evtlog_size; | 
|  | if (!base) | 
|  | base = priv->fw->init_evtlog_ptr; | 
|  | } else { | 
|  | logsize = priv->fw->inst_evtlog_size; | 
|  | if (!base) | 
|  | base = priv->fw->inst_evtlog_ptr; | 
|  | } | 
|  |  | 
|  | if (!iwlagn_hw_valid_rtc_data_addr(base)) { | 
|  | IWL_ERR(priv, | 
|  | "Invalid event log pointer 0x%08X for %s uCode\n", | 
|  | base, | 
|  | (priv->cur_ucode == IWL_UCODE_INIT) | 
|  | ? "Init" : "RT"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* event log header */ | 
|  | capacity = iwl_trans_read_mem32(trans, base); | 
|  | mode = iwl_trans_read_mem32(trans, base + (1 * sizeof(u32))); | 
|  | num_wraps = iwl_trans_read_mem32(trans, base + (2 * sizeof(u32))); | 
|  | next_entry = iwl_trans_read_mem32(trans, base + (3 * sizeof(u32))); | 
|  |  | 
|  | if (capacity > logsize) { | 
|  | IWL_ERR(priv, "Log capacity %d is bogus, limit to %d " | 
|  | "entries\n", capacity, logsize); | 
|  | capacity = logsize; | 
|  | } | 
|  |  | 
|  | if (next_entry > logsize) { | 
|  | IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", | 
|  | next_entry, logsize); | 
|  | next_entry = logsize; | 
|  | } | 
|  |  | 
|  | size = num_wraps ? capacity : next_entry; | 
|  |  | 
|  | /* bail out if nothing in log */ | 
|  | if (size == 0) { | 
|  | IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n"); | 
|  | return pos; | 
|  | } | 
|  |  | 
|  | if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log) | 
|  | size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) | 
|  | ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; | 
|  | IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n", | 
|  | size); | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | if (buf) { | 
|  | if (full_log) | 
|  | bufsz = capacity * 48; | 
|  | else | 
|  | bufsz = size * 48; | 
|  | *buf = kmalloc(bufsz, GFP_KERNEL); | 
|  | if (!*buf) | 
|  | return -ENOMEM; | 
|  | } | 
|  | if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) { | 
|  | /* | 
|  | * if uCode has wrapped back to top of log, | 
|  | * start at the oldest entry, | 
|  | * i.e the next one that uCode would fill. | 
|  | */ | 
|  | if (num_wraps) | 
|  | pos = iwl_print_event_log(priv, next_entry, | 
|  | capacity - next_entry, mode, | 
|  | pos, buf, bufsz); | 
|  | /* (then/else) start at top of log */ | 
|  | pos = iwl_print_event_log(priv, 0, | 
|  | next_entry, mode, pos, buf, bufsz); | 
|  | } else | 
|  | pos = iwl_print_last_event_logs(priv, capacity, num_wraps, | 
|  | next_entry, size, mode, | 
|  | pos, buf, bufsz); | 
|  | #else | 
|  | pos = iwl_print_last_event_logs(priv, capacity, num_wraps, | 
|  | next_entry, size, mode, | 
|  | pos, buf, bufsz); | 
|  | #endif | 
|  | return pos; | 
|  | } | 
|  |  | 
|  | static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand) | 
|  | { | 
|  | unsigned int reload_msec; | 
|  | unsigned long reload_jiffies; | 
|  |  | 
|  | if (iwl_have_debug_level(IWL_DL_FW_ERRORS)) | 
|  | iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS); | 
|  |  | 
|  | /* uCode is no longer loaded. */ | 
|  | priv->ucode_loaded = false; | 
|  |  | 
|  | /* Set the FW error flag -- cleared on iwl_down */ | 
|  | set_bit(STATUS_FW_ERROR, &priv->status); | 
|  |  | 
|  | iwl_abort_notification_waits(&priv->notif_wait); | 
|  |  | 
|  | /* Keep the restart process from trying to send host | 
|  | * commands by clearing the ready bit */ | 
|  | clear_bit(STATUS_READY, &priv->status); | 
|  |  | 
|  | if (!ondemand) { | 
|  | /* | 
|  | * If firmware keep reloading, then it indicate something | 
|  | * serious wrong and firmware having problem to recover | 
|  | * from it. Instead of keep trying which will fill the syslog | 
|  | * and hang the system, let's just stop it | 
|  | */ | 
|  | reload_jiffies = jiffies; | 
|  | reload_msec = jiffies_to_msecs((long) reload_jiffies - | 
|  | (long) priv->reload_jiffies); | 
|  | priv->reload_jiffies = reload_jiffies; | 
|  | if (reload_msec <= IWL_MIN_RELOAD_DURATION) { | 
|  | priv->reload_count++; | 
|  | if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { | 
|  | IWL_ERR(priv, "BUG_ON, Stop restarting\n"); | 
|  | return; | 
|  | } | 
|  | } else | 
|  | priv->reload_count = 0; | 
|  | } | 
|  |  | 
|  | if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | if (iwlwifi_mod_params.fw_restart) { | 
|  | IWL_DEBUG_FW_ERRORS(priv, | 
|  | "Restarting adapter due to uCode error.\n"); | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } else | 
|  | IWL_DEBUG_FW_ERRORS(priv, | 
|  | "Detected FW error, but not restarting\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_nic_error(struct iwl_op_mode *op_mode) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | IWL_ERR(priv, "Loaded firmware version: %s\n", | 
|  | priv->fw->fw_version); | 
|  |  | 
|  | iwl_dump_nic_error_log(priv); | 
|  | iwl_dump_nic_event_log(priv, false, NULL); | 
|  |  | 
|  | iwlagn_fw_error(priv, false); | 
|  | } | 
|  |  | 
|  | static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | if (!iwl_check_for_ct_kill(priv)) { | 
|  | IWL_ERR(priv, "Restarting adapter queue is full\n"); | 
|  | iwlagn_fw_error(priv, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | #define EEPROM_RF_CONFIG_TYPE_MAX      0x3 | 
|  |  | 
|  | static void iwl_nic_config(struct iwl_op_mode *op_mode) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | /* SKU Control */ | 
|  | iwl_trans_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, | 
|  | CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | | 
|  | CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP, | 
|  | (CSR_HW_REV_STEP(priv->trans->hw_rev) << | 
|  | CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) | | 
|  | (CSR_HW_REV_DASH(priv->trans->hw_rev) << | 
|  | CSR_HW_IF_CONFIG_REG_POS_MAC_DASH)); | 
|  |  | 
|  | /* write radio config values to register */ | 
|  | if (priv->nvm_data->radio_cfg_type <= EEPROM_RF_CONFIG_TYPE_MAX) { | 
|  | u32 reg_val = | 
|  | priv->nvm_data->radio_cfg_type << | 
|  | CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE | | 
|  | priv->nvm_data->radio_cfg_step << | 
|  | CSR_HW_IF_CONFIG_REG_POS_PHY_STEP | | 
|  | priv->nvm_data->radio_cfg_dash << | 
|  | CSR_HW_IF_CONFIG_REG_POS_PHY_DASH; | 
|  |  | 
|  | iwl_trans_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, | 
|  | CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | | 
|  | CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | | 
|  | CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, | 
|  | reg_val); | 
|  |  | 
|  | IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n", | 
|  | priv->nvm_data->radio_cfg_type, | 
|  | priv->nvm_data->radio_cfg_step, | 
|  | priv->nvm_data->radio_cfg_dash); | 
|  | } else { | 
|  | WARN_ON(1); | 
|  | } | 
|  |  | 
|  | /* set CSR_HW_CONFIG_REG for uCode use */ | 
|  | iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG, | 
|  | CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | | 
|  | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); | 
|  |  | 
|  | /* W/A : NIC is stuck in a reset state after Early PCIe power off | 
|  | * (PCIe power is lost before PERST# is asserted), | 
|  | * causing ME FW to lose ownership and not being able to obtain it back. | 
|  | */ | 
|  | iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG, | 
|  | APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, | 
|  | ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); | 
|  |  | 
|  | if (priv->lib->nic_config) | 
|  | priv->lib->nic_config(priv); | 
|  | } | 
|  |  | 
|  | static void iwl_wimax_active(struct iwl_op_mode *op_mode) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | clear_bit(STATUS_READY, &priv->status); | 
|  | IWL_ERR(priv, "RF is used by WiMAX\n"); | 
|  | } | 
|  |  | 
|  | static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  | int mq = priv->queue_to_mac80211[queue]; | 
|  |  | 
|  | if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) | 
|  | return; | 
|  |  | 
|  | if (atomic_inc_return(&priv->queue_stop_count[mq]) > 1) { | 
|  | IWL_DEBUG_TX_QUEUES(priv, | 
|  | "queue %d (mac80211 %d) already stopped\n", | 
|  | queue, mq); | 
|  | return; | 
|  | } | 
|  |  | 
|  | set_bit(mq, &priv->transport_queue_stop); | 
|  | ieee80211_stop_queue(priv->hw, mq); | 
|  | } | 
|  |  | 
|  | static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  | int mq = priv->queue_to_mac80211[queue]; | 
|  |  | 
|  | if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) | 
|  | return; | 
|  |  | 
|  | if (atomic_dec_return(&priv->queue_stop_count[mq]) > 0) { | 
|  | IWL_DEBUG_TX_QUEUES(priv, | 
|  | "queue %d (mac80211 %d) already awake\n", | 
|  | queue, mq); | 
|  | return; | 
|  | } | 
|  |  | 
|  | clear_bit(mq, &priv->transport_queue_stop); | 
|  |  | 
|  | if (!priv->passive_no_rx) | 
|  | ieee80211_wake_queue(priv->hw, mq); | 
|  | } | 
|  |  | 
|  | void iwlagn_lift_passive_no_rx(struct iwl_priv *priv) | 
|  | { | 
|  | int mq; | 
|  |  | 
|  | if (!priv->passive_no_rx) | 
|  | return; | 
|  |  | 
|  | for (mq = 0; mq < IWLAGN_FIRST_AMPDU_QUEUE; mq++) { | 
|  | if (!test_bit(mq, &priv->transport_queue_stop)) { | 
|  | IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d\n", mq); | 
|  | ieee80211_wake_queue(priv->hw, mq); | 
|  | } else { | 
|  | IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d\n", mq); | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->passive_no_rx = false; | 
|  | } | 
|  |  | 
|  | static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  | struct ieee80211_tx_info *info; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); | 
|  | ieee80211_free_txskb(priv->hw, skb); | 
|  | } | 
|  |  | 
|  | static bool iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  |  | 
|  | if (state) | 
|  | set_bit(STATUS_RF_KILL_HW, &priv->status); | 
|  | else | 
|  | clear_bit(STATUS_RF_KILL_HW, &priv->status); | 
|  |  | 
|  | wiphy_rfkill_set_hw_state(priv->hw->wiphy, state); | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static const struct iwl_op_mode_ops iwl_dvm_ops = { | 
|  | .start = iwl_op_mode_dvm_start, | 
|  | .stop = iwl_op_mode_dvm_stop, | 
|  | .rx = iwl_rx_dispatch, | 
|  | .queue_full = iwl_stop_sw_queue, | 
|  | .queue_not_full = iwl_wake_sw_queue, | 
|  | .hw_rf_kill = iwl_set_hw_rfkill_state, | 
|  | .free_skb = iwl_free_skb, | 
|  | .nic_error = iwl_nic_error, | 
|  | .cmd_queue_full = iwl_cmd_queue_full, | 
|  | .nic_config = iwl_nic_config, | 
|  | .wimax_active = iwl_wimax_active, | 
|  | }; | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * driver and module entry point | 
|  | * | 
|  | *****************************************************************************/ | 
|  | static int __init iwl_init(void) | 
|  | { | 
|  |  | 
|  | int ret; | 
|  |  | 
|  | ret = iwlagn_rate_control_register(); | 
|  | if (ret) { | 
|  | pr_err("Unable to register rate control algorithm: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = iwl_opmode_register("iwldvm", &iwl_dvm_ops); | 
|  | if (ret) { | 
|  | pr_err("Unable to register op_mode: %d\n", ret); | 
|  | iwlagn_rate_control_unregister(); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | module_init(iwl_init); | 
|  |  | 
|  | static void __exit iwl_exit(void) | 
|  | { | 
|  | iwl_opmode_deregister("iwldvm"); | 
|  | iwlagn_rate_control_unregister(); | 
|  | } | 
|  | module_exit(iwl_exit); |