| /* | 
 |  *  IBM eServer eHCA Infiniband device driver for Linux on POWER | 
 |  * | 
 |  *  HCA query functions | 
 |  * | 
 |  *  Authors: Heiko J Schick <schickhj@de.ibm.com> | 
 |  *           Christoph Raisch <raisch@de.ibm.com> | 
 |  * | 
 |  *  Copyright (c) 2005 IBM Corporation | 
 |  * | 
 |  *  All rights reserved. | 
 |  * | 
 |  *  This source code is distributed under a dual license of GPL v2.0 and OpenIB | 
 |  *  BSD. | 
 |  * | 
 |  * OpenIB BSD License | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions are met: | 
 |  * | 
 |  * Redistributions of source code must retain the above copyright notice, this | 
 |  * list of conditions and the following disclaimer. | 
 |  * | 
 |  * Redistributions in binary form must reproduce the above copyright notice, | 
 |  * this list of conditions and the following disclaimer in the documentation | 
 |  * and/or other materials | 
 |  * provided with the distribution. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | 
 |  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
 |  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
 |  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | 
 |  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | 
 |  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | 
 |  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR | 
 |  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER | 
 |  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
 |  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #include "ehca_tools.h" | 
 | #include "ehca_iverbs.h" | 
 | #include "hcp_if.h" | 
 |  | 
 | static unsigned int limit_uint(unsigned int value) | 
 | { | 
 | 	return min_t(unsigned int, value, INT_MAX); | 
 | } | 
 |  | 
 | int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props) | 
 | { | 
 | 	int i, ret = 0; | 
 | 	struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, | 
 | 					      ib_device); | 
 | 	struct hipz_query_hca *rblock; | 
 |  | 
 | 	static const u32 cap_mapping[] = { | 
 | 		IB_DEVICE_RESIZE_MAX_WR,      HCA_CAP_WQE_RESIZE, | 
 | 		IB_DEVICE_BAD_PKEY_CNTR,      HCA_CAP_BAD_P_KEY_CTR, | 
 | 		IB_DEVICE_BAD_QKEY_CNTR,      HCA_CAP_Q_KEY_VIOL_CTR, | 
 | 		IB_DEVICE_RAW_MULTI,          HCA_CAP_RAW_PACKET_MCAST, | 
 | 		IB_DEVICE_AUTO_PATH_MIG,      HCA_CAP_AUTO_PATH_MIG, | 
 | 		IB_DEVICE_CHANGE_PHY_PORT,    HCA_CAP_SQD_RTS_PORT_CHANGE, | 
 | 		IB_DEVICE_UD_AV_PORT_ENFORCE, HCA_CAP_AH_PORT_NR_CHECK, | 
 | 		IB_DEVICE_CURR_QP_STATE_MOD,  HCA_CAP_CUR_QP_STATE_MOD, | 
 | 		IB_DEVICE_SHUTDOWN_PORT,      HCA_CAP_SHUTDOWN_PORT, | 
 | 		IB_DEVICE_INIT_TYPE,          HCA_CAP_INIT_TYPE, | 
 | 		IB_DEVICE_PORT_ACTIVE_EVENT,  HCA_CAP_PORT_ACTIVE_EVENT, | 
 | 	}; | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device, "Can't allocate rblock memory."); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	if (hipz_h_query_hca(shca->ipz_hca_handle, rblock) != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query device properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto query_device1; | 
 | 	} | 
 |  | 
 | 	memset(props, 0, sizeof(struct ib_device_attr)); | 
 | 	props->page_size_cap   = shca->hca_cap_mr_pgsize; | 
 | 	props->fw_ver          = rblock->hw_ver; | 
 | 	props->max_mr_size     = rblock->max_mr_size; | 
 | 	props->vendor_id       = rblock->vendor_id >> 8; | 
 | 	props->vendor_part_id  = rblock->vendor_part_id >> 16; | 
 | 	props->hw_ver          = rblock->hw_ver; | 
 | 	props->max_qp          = limit_uint(rblock->max_qp); | 
 | 	props->max_qp_wr       = limit_uint(rblock->max_wqes_wq); | 
 | 	props->max_sge         = limit_uint(rblock->max_sge); | 
 | 	props->max_sge_rd      = limit_uint(rblock->max_sge_rd); | 
 | 	props->max_cq          = limit_uint(rblock->max_cq); | 
 | 	props->max_cqe         = limit_uint(rblock->max_cqe); | 
 | 	props->max_mr          = limit_uint(rblock->max_mr); | 
 | 	props->max_mw          = limit_uint(rblock->max_mw); | 
 | 	props->max_pd          = limit_uint(rblock->max_pd); | 
 | 	props->max_ah          = limit_uint(rblock->max_ah); | 
 | 	props->max_ee          = limit_uint(rblock->max_rd_ee_context); | 
 | 	props->max_rdd         = limit_uint(rblock->max_rd_domain); | 
 | 	props->max_fmr         = limit_uint(rblock->max_mr); | 
 | 	props->max_qp_rd_atom  = limit_uint(rblock->max_rr_qp); | 
 | 	props->max_ee_rd_atom  = limit_uint(rblock->max_rr_ee_context); | 
 | 	props->max_res_rd_atom = limit_uint(rblock->max_rr_hca); | 
 | 	props->max_qp_init_rd_atom = limit_uint(rblock->max_act_wqs_qp); | 
 | 	props->max_ee_init_rd_atom = limit_uint(rblock->max_act_wqs_ee_context); | 
 |  | 
 | 	if (EHCA_BMASK_GET(HCA_CAP_SRQ, shca->hca_cap)) { | 
 | 		props->max_srq         = limit_uint(props->max_qp); | 
 | 		props->max_srq_wr      = limit_uint(props->max_qp_wr); | 
 | 		props->max_srq_sge     = 3; | 
 | 	} | 
 |  | 
 | 	props->max_pkeys           = 16; | 
 | 	/* Some FW versions say 0 here; insert sensible value in that case */ | 
 | 	props->local_ca_ack_delay  = rblock->local_ca_ack_delay ? | 
 | 		min_t(u8, rblock->local_ca_ack_delay, 255) : 12; | 
 | 	props->max_raw_ipv6_qp     = limit_uint(rblock->max_raw_ipv6_qp); | 
 | 	props->max_raw_ethy_qp     = limit_uint(rblock->max_raw_ethy_qp); | 
 | 	props->max_mcast_grp       = limit_uint(rblock->max_mcast_grp); | 
 | 	props->max_mcast_qp_attach = limit_uint(rblock->max_mcast_qp_attach); | 
 | 	props->max_total_mcast_qp_attach | 
 | 		= limit_uint(rblock->max_total_mcast_qp_attach); | 
 |  | 
 | 	/* translate device capabilities */ | 
 | 	props->device_cap_flags = IB_DEVICE_SYS_IMAGE_GUID | | 
 | 		IB_DEVICE_RC_RNR_NAK_GEN | IB_DEVICE_N_NOTIFY_CQ; | 
 | 	for (i = 0; i < ARRAY_SIZE(cap_mapping); i += 2) | 
 | 		if (rblock->hca_cap_indicators & cap_mapping[i + 1]) | 
 | 			props->device_cap_flags |= cap_mapping[i]; | 
 |  | 
 | query_device1: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static enum ib_mtu map_mtu(struct ehca_shca *shca, u32 fw_mtu) | 
 | { | 
 | 	switch (fw_mtu) { | 
 | 	case 0x1: | 
 | 		return IB_MTU_256; | 
 | 	case 0x2: | 
 | 		return IB_MTU_512; | 
 | 	case 0x3: | 
 | 		return IB_MTU_1024; | 
 | 	case 0x4: | 
 | 		return IB_MTU_2048; | 
 | 	case 0x5: | 
 | 		return IB_MTU_4096; | 
 | 	default: | 
 | 		ehca_err(&shca->ib_device, "Unknown MTU size: %x.", | 
 | 			 fw_mtu); | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static u8 map_number_of_vls(struct ehca_shca *shca, u32 vl_cap) | 
 | { | 
 | 	switch (vl_cap) { | 
 | 	case 0x1: | 
 | 		return 1; | 
 | 	case 0x2: | 
 | 		return 2; | 
 | 	case 0x3: | 
 | 		return 4; | 
 | 	case 0x4: | 
 | 		return 8; | 
 | 	case 0x5: | 
 | 		return 15; | 
 | 	default: | 
 | 		ehca_err(&shca->ib_device, "invalid Vl Capability: %x.", | 
 | 			 vl_cap); | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | int ehca_query_port(struct ib_device *ibdev, | 
 | 		    u8 port, struct ib_port_attr *props) | 
 | { | 
 | 	int ret = 0; | 
 | 	u64 h_ret; | 
 | 	struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, | 
 | 					      ib_device); | 
 | 	struct hipz_query_port *rblock; | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device, "Can't allocate rblock memory."); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); | 
 | 	if (h_ret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query port properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto query_port1; | 
 | 	} | 
 |  | 
 | 	memset(props, 0, sizeof(struct ib_port_attr)); | 
 |  | 
 | 	props->active_mtu = props->max_mtu = map_mtu(shca, rblock->max_mtu); | 
 | 	props->port_cap_flags  = rblock->capability_mask; | 
 | 	props->gid_tbl_len     = rblock->gid_tbl_len; | 
 | 	if (rblock->max_msg_sz) | 
 | 		props->max_msg_sz      = rblock->max_msg_sz; | 
 | 	else | 
 | 		props->max_msg_sz      = 0x1 << 31; | 
 | 	props->bad_pkey_cntr   = rblock->bad_pkey_cntr; | 
 | 	props->qkey_viol_cntr  = rblock->qkey_viol_cntr; | 
 | 	props->pkey_tbl_len    = rblock->pkey_tbl_len; | 
 | 	props->lid             = rblock->lid; | 
 | 	props->sm_lid          = rblock->sm_lid; | 
 | 	props->lmc             = rblock->lmc; | 
 | 	props->sm_sl           = rblock->sm_sl; | 
 | 	props->subnet_timeout  = rblock->subnet_timeout; | 
 | 	props->init_type_reply = rblock->init_type_reply; | 
 | 	props->max_vl_num      = map_number_of_vls(shca, rblock->vl_cap); | 
 |  | 
 | 	if (rblock->state && rblock->phys_width) { | 
 | 		props->phys_state      = rblock->phys_pstate; | 
 | 		props->state           = rblock->phys_state; | 
 | 		props->active_width    = rblock->phys_width; | 
 | 		props->active_speed    = rblock->phys_speed; | 
 | 	} else { | 
 | 		/* old firmware releases don't report physical | 
 | 		 * port info, so use default values | 
 | 		 */ | 
 | 		props->phys_state      = 5; | 
 | 		props->state           = rblock->state; | 
 | 		props->active_width    = IB_WIDTH_12X; | 
 | 		props->active_speed    = 0x1; | 
 | 	} | 
 |  | 
 | query_port1: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ehca_query_sma_attr(struct ehca_shca *shca, | 
 | 			u8 port, struct ehca_sma_attr *attr) | 
 | { | 
 | 	int ret = 0; | 
 | 	u64 h_ret; | 
 | 	struct hipz_query_port *rblock; | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_ATOMIC); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device, "Can't allocate rblock memory."); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); | 
 | 	if (h_ret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query port properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto query_sma_attr1; | 
 | 	} | 
 |  | 
 | 	memset(attr, 0, sizeof(struct ehca_sma_attr)); | 
 |  | 
 | 	attr->lid    = rblock->lid; | 
 | 	attr->lmc    = rblock->lmc; | 
 | 	attr->sm_sl  = rblock->sm_sl; | 
 | 	attr->sm_lid = rblock->sm_lid; | 
 |  | 
 | 	attr->pkey_tbl_len = rblock->pkey_tbl_len; | 
 | 	memcpy(attr->pkeys, rblock->pkey_entries, sizeof(attr->pkeys)); | 
 |  | 
 | query_sma_attr1: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ehca_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey) | 
 | { | 
 | 	int ret = 0; | 
 | 	u64 h_ret; | 
 | 	struct ehca_shca *shca; | 
 | 	struct hipz_query_port *rblock; | 
 |  | 
 | 	shca = container_of(ibdev, struct ehca_shca, ib_device); | 
 | 	if (index > 16) { | 
 | 		ehca_err(&shca->ib_device, "Invalid index: %x.", index); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device,  "Can't allocate rblock memory."); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); | 
 | 	if (h_ret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query port properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto query_pkey1; | 
 | 	} | 
 |  | 
 | 	memcpy(pkey, &rblock->pkey_entries + index, sizeof(u16)); | 
 |  | 
 | query_pkey1: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ehca_query_gid(struct ib_device *ibdev, u8 port, | 
 | 		   int index, union ib_gid *gid) | 
 | { | 
 | 	int ret = 0; | 
 | 	u64 h_ret; | 
 | 	struct ehca_shca *shca = container_of(ibdev, struct ehca_shca, | 
 | 					      ib_device); | 
 | 	struct hipz_query_port *rblock; | 
 |  | 
 | 	if (index > 255) { | 
 | 		ehca_err(&shca->ib_device, "Invalid index: %x.", index); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device, "Can't allocate rblock memory."); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); | 
 | 	if (h_ret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query port properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto query_gid1; | 
 | 	} | 
 |  | 
 | 	memcpy(&gid->raw[0], &rblock->gid_prefix, sizeof(u64)); | 
 | 	memcpy(&gid->raw[8], &rblock->guid_entries[index], sizeof(u64)); | 
 |  | 
 | query_gid1: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const u32 allowed_port_caps = ( | 
 | 	IB_PORT_SM | IB_PORT_LED_INFO_SUP | IB_PORT_CM_SUP | | 
 | 	IB_PORT_SNMP_TUNNEL_SUP | IB_PORT_DEVICE_MGMT_SUP | | 
 | 	IB_PORT_VENDOR_CLASS_SUP); | 
 |  | 
 | int ehca_modify_port(struct ib_device *ibdev, | 
 | 		     u8 port, int port_modify_mask, | 
 | 		     struct ib_port_modify *props) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct ehca_shca *shca; | 
 | 	struct hipz_query_port *rblock; | 
 | 	u32 cap; | 
 | 	u64 hret; | 
 |  | 
 | 	shca = container_of(ibdev, struct ehca_shca, ib_device); | 
 | 	if ((props->set_port_cap_mask | props->clr_port_cap_mask) | 
 | 	    & ~allowed_port_caps) { | 
 | 		ehca_err(&shca->ib_device, "Non-changeable bits set in masks  " | 
 | 			 "set=%x  clr=%x  allowed=%x", props->set_port_cap_mask, | 
 | 			 props->clr_port_cap_mask, allowed_port_caps); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (mutex_lock_interruptible(&shca->modify_mutex)) | 
 | 		return -ERESTARTSYS; | 
 |  | 
 | 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); | 
 | 	if (!rblock) { | 
 | 		ehca_err(&shca->ib_device,  "Can't allocate rblock memory."); | 
 | 		ret = -ENOMEM; | 
 | 		goto modify_port1; | 
 | 	} | 
 |  | 
 | 	hret = hipz_h_query_port(shca->ipz_hca_handle, port, rblock); | 
 | 	if (hret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Can't query port properties"); | 
 | 		ret = -EINVAL; | 
 | 		goto modify_port2; | 
 | 	} | 
 |  | 
 | 	cap = (rblock->capability_mask | props->set_port_cap_mask) | 
 | 		& ~props->clr_port_cap_mask; | 
 |  | 
 | 	hret = hipz_h_modify_port(shca->ipz_hca_handle, port, | 
 | 				  cap, props->init_type, port_modify_mask); | 
 | 	if (hret != H_SUCCESS) { | 
 | 		ehca_err(&shca->ib_device, "Modify port failed  h_ret=%lli", | 
 | 			 hret); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | modify_port2: | 
 | 	ehca_free_fw_ctrlblock(rblock); | 
 |  | 
 | modify_port1: | 
 | 	mutex_unlock(&shca->modify_mutex); | 
 |  | 
 | 	return ret; | 
 | } |