|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include <linux/stringify.h> | 
|  |  | 
|  | #include "iwl-eeprom.h" | 
|  | #include "iwl-dev.h" | 
|  | #include "iwl-core.h" | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-agn.h" | 
|  | #include "iwl-agn-hw.h" | 
|  | #include "iwl-trans.h" | 
|  | #include "iwl-shared.h" | 
|  | #include "iwl-cfg.h" | 
|  |  | 
|  | /* Highest firmware API version supported */ | 
|  | #define IWL6000_UCODE_API_MAX 6 | 
|  | #define IWL6050_UCODE_API_MAX 5 | 
|  | #define IWL6000G2_UCODE_API_MAX 6 | 
|  |  | 
|  | /* Oldest version we won't warn about */ | 
|  | #define IWL6000_UCODE_API_OK 4 | 
|  | #define IWL6000G2_UCODE_API_OK 5 | 
|  | #define IWL6050_UCODE_API_OK 5 | 
|  | #define IWL6000G2B_UCODE_API_OK 6 | 
|  |  | 
|  | /* Lowest firmware API version supported */ | 
|  | #define IWL6000_UCODE_API_MIN 4 | 
|  | #define IWL6050_UCODE_API_MIN 4 | 
|  | #define IWL6000G2_UCODE_API_MIN 4 | 
|  |  | 
|  | #define IWL6000_FW_PRE "iwlwifi-6000-" | 
|  | #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" | 
|  |  | 
|  | #define IWL6050_FW_PRE "iwlwifi-6050-" | 
|  | #define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" | 
|  |  | 
|  | #define IWL6005_FW_PRE "iwlwifi-6000g2a-" | 
|  | #define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" | 
|  |  | 
|  | #define IWL6030_FW_PRE "iwlwifi-6000g2b-" | 
|  | #define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" | 
|  |  | 
|  | static void iwl6000_set_ct_threshold(struct iwl_priv *priv) | 
|  | { | 
|  | /* want Celsius */ | 
|  | hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD; | 
|  | hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; | 
|  | } | 
|  |  | 
|  | static void iwl6050_additional_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | /* Indicate calibration version to uCode. */ | 
|  | if (iwl_eeprom_calib_version(priv->shrd) >= 6) | 
|  | iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); | 
|  | } | 
|  |  | 
|  | static void iwl6150_additional_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | /* Indicate calibration version to uCode. */ | 
|  | if (iwl_eeprom_calib_version(priv->shrd) >= 6) | 
|  | iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); | 
|  | iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_6050_1x2); | 
|  | } | 
|  |  | 
|  | static void iwl6000i_additional_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | /* 2x2 IPA phy type */ | 
|  | iwl_write32(trans(priv), CSR_GP_DRIVER_REG, | 
|  | CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); | 
|  | } | 
|  |  | 
|  | /* NIC configuration for 6000 series */ | 
|  | static void iwl6000_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | iwl_rf_config(priv); | 
|  |  | 
|  | /* do additional nic configuration if needed */ | 
|  | if (cfg(priv)->additional_nic_config) | 
|  | cfg(priv)->additional_nic_config(priv); | 
|  | } | 
|  |  | 
|  | static const struct iwl_sensitivity_ranges iwl6000_sensitivity = { | 
|  | .min_nrg_cck = 110, | 
|  | .auto_corr_min_ofdm = 80, | 
|  | .auto_corr_min_ofdm_mrc = 128, | 
|  | .auto_corr_min_ofdm_x1 = 105, | 
|  | .auto_corr_min_ofdm_mrc_x1 = 192, | 
|  |  | 
|  | .auto_corr_max_ofdm = 145, | 
|  | .auto_corr_max_ofdm_mrc = 232, | 
|  | .auto_corr_max_ofdm_x1 = 110, | 
|  | .auto_corr_max_ofdm_mrc_x1 = 232, | 
|  |  | 
|  | .auto_corr_min_cck = 125, | 
|  | .auto_corr_max_cck = 175, | 
|  | .auto_corr_min_cck_mrc = 160, | 
|  | .auto_corr_max_cck_mrc = 310, | 
|  | .nrg_th_cck = 110, | 
|  | .nrg_th_ofdm = 110, | 
|  |  | 
|  | .barker_corr_th_min = 190, | 
|  | .barker_corr_th_min_mrc = 336, | 
|  | .nrg_th_cca = 62, | 
|  | }; | 
|  |  | 
|  | static void iwl6000_hw_set_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ) | | 
|  | BIT(IEEE80211_BAND_5GHZ); | 
|  |  | 
|  | hw_params(priv).tx_chains_num = | 
|  | num_of_ant(hw_params(priv).valid_tx_ant); | 
|  | if (cfg(priv)->rx_with_siso_diversity) | 
|  | hw_params(priv).rx_chains_num = 1; | 
|  | else | 
|  | hw_params(priv).rx_chains_num = | 
|  | num_of_ant(hw_params(priv).valid_rx_ant); | 
|  |  | 
|  | iwl6000_set_ct_threshold(priv); | 
|  |  | 
|  | /* Set initial sensitivity parameters */ | 
|  | hw_params(priv).sens = &iwl6000_sensitivity; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int iwl6000_hw_channel_switch(struct iwl_priv *priv, | 
|  | struct ieee80211_channel_switch *ch_switch) | 
|  | { | 
|  | /* | 
|  | * MULTI-FIXME | 
|  | * See iwlagn_mac_channel_switch. | 
|  | */ | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | struct iwl6000_channel_switch_cmd cmd; | 
|  | const struct iwl_channel_info *ch_info; | 
|  | u32 switch_time_in_usec, ucode_switch_time; | 
|  | u16 ch; | 
|  | u32 tsf_low; | 
|  | u8 switch_count; | 
|  | u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | struct iwl_host_cmd hcmd = { | 
|  | .id = REPLY_CHANNEL_SWITCH, | 
|  | .len = { sizeof(cmd), }, | 
|  | .flags = CMD_SYNC, | 
|  | .data = { &cmd, }, | 
|  | }; | 
|  |  | 
|  | cmd.band = priv->band == IEEE80211_BAND_2GHZ; | 
|  | ch = ch_switch->channel->hw_value; | 
|  | IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", | 
|  | ctx->active.channel, ch); | 
|  | cmd.channel = cpu_to_le16(ch); | 
|  | cmd.rxon_flags = ctx->staging.flags; | 
|  | cmd.rxon_filter_flags = ctx->staging.filter_flags; | 
|  | switch_count = ch_switch->count; | 
|  | tsf_low = ch_switch->timestamp & 0x0ffffffff; | 
|  | /* | 
|  | * calculate the ucode channel switch time | 
|  | * adding TSF as one of the factor for when to switch | 
|  | */ | 
|  | if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { | 
|  | if (switch_count > ((priv->ucode_beacon_time - tsf_low) / | 
|  | beacon_interval)) { | 
|  | switch_count -= (priv->ucode_beacon_time - | 
|  | tsf_low) / beacon_interval; | 
|  | } else | 
|  | switch_count = 0; | 
|  | } | 
|  | if (switch_count <= 1) | 
|  | cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); | 
|  | else { | 
|  | switch_time_in_usec = | 
|  | vif->bss_conf.beacon_int * switch_count * TIME_UNIT; | 
|  | ucode_switch_time = iwl_usecs_to_beacons(priv, | 
|  | switch_time_in_usec, | 
|  | beacon_interval); | 
|  | cmd.switch_time = iwl_add_beacon_time(priv, | 
|  | priv->ucode_beacon_time, | 
|  | ucode_switch_time, | 
|  | beacon_interval); | 
|  | } | 
|  | IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", | 
|  | cmd.switch_time); | 
|  | ch_info = iwl_get_channel_info(priv, priv->band, ch); | 
|  | if (ch_info) | 
|  | cmd.expect_beacon = is_channel_radar(ch_info); | 
|  | else { | 
|  | IWL_ERR(priv, "invalid channel switch from %u to %u\n", | 
|  | ctx->active.channel, ch); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | return iwl_dvm_send_cmd(priv, &hcmd); | 
|  | } | 
|  |  | 
|  | static struct iwl_lib_ops iwl6000_lib = { | 
|  | .set_hw_params = iwl6000_hw_set_hw_params, | 
|  | .set_channel_switch = iwl6000_hw_channel_switch, | 
|  | .nic_config = iwl6000_nic_config, | 
|  | .eeprom_ops = { | 
|  | .regulatory_bands = { | 
|  | EEPROM_REG_BAND_1_CHANNELS, | 
|  | EEPROM_REG_BAND_2_CHANNELS, | 
|  | EEPROM_REG_BAND_3_CHANNELS, | 
|  | EEPROM_REG_BAND_4_CHANNELS, | 
|  | EEPROM_REG_BAND_5_CHANNELS, | 
|  | EEPROM_6000_REG_BAND_24_HT40_CHANNELS, | 
|  | EEPROM_REG_BAND_52_HT40_CHANNELS | 
|  | }, | 
|  | .enhanced_txpower = true, | 
|  | }, | 
|  | .temperature = iwlagn_temperature, | 
|  | }; | 
|  |  | 
|  | static struct iwl_lib_ops iwl6030_lib = { | 
|  | .set_hw_params = iwl6000_hw_set_hw_params, | 
|  | .set_channel_switch = iwl6000_hw_channel_switch, | 
|  | .nic_config = iwl6000_nic_config, | 
|  | .eeprom_ops = { | 
|  | .regulatory_bands = { | 
|  | EEPROM_REG_BAND_1_CHANNELS, | 
|  | EEPROM_REG_BAND_2_CHANNELS, | 
|  | EEPROM_REG_BAND_3_CHANNELS, | 
|  | EEPROM_REG_BAND_4_CHANNELS, | 
|  | EEPROM_REG_BAND_5_CHANNELS, | 
|  | EEPROM_6000_REG_BAND_24_HT40_CHANNELS, | 
|  | EEPROM_REG_BAND_52_HT40_CHANNELS | 
|  | }, | 
|  | .enhanced_txpower = true, | 
|  | }, | 
|  | .temperature = iwlagn_temperature, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_base_params iwl6000_base_params = { | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .pll_cfg_val = 0, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 51, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .wd_timeout = IWL_DEF_WD_TIMEOUT, | 
|  | .max_event_log_size = 512, | 
|  | .shadow_reg_enable = true, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_base_params iwl6050_base_params = { | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .pll_cfg_val = 0, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x50, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 51, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1500, | 
|  | .wd_timeout = IWL_DEF_WD_TIMEOUT, | 
|  | .max_event_log_size = 1024, | 
|  | .shadow_reg_enable = true, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_base_params iwl6000_g2_base_params = { | 
|  | .eeprom_size = OTP_LOW_IMAGE_SIZE, | 
|  | .num_of_queues = IWLAGN_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, | 
|  | .pll_cfg_val = 0, | 
|  | .max_ll_items = OTP_MAX_LL_ITEMS_6x00, | 
|  | .shadow_ram_support = true, | 
|  | .led_compensation = 57, | 
|  | .adv_thermal_throttle = true, | 
|  | .support_ct_kill_exit = true, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .chain_noise_scale = 1000, | 
|  | .wd_timeout = IWL_LONG_WD_TIMEOUT, | 
|  | .max_event_log_size = 512, | 
|  | .shadow_reg_enable = true, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_ht_params iwl6000_ht_params = { | 
|  | .ht_greenfield_support = true, | 
|  | .use_rts_for_aggregation = true, /* use rts/cts protection */ | 
|  | }; | 
|  |  | 
|  | static const struct iwl_bt_params iwl6000_bt_params = { | 
|  | /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ | 
|  | .advanced_bt_coexist = true, | 
|  | .agg_time_limit = BT_AGG_THRESHOLD_DEF, | 
|  | .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, | 
|  | .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, | 
|  | .bt_sco_disable = true, | 
|  | }; | 
|  |  | 
|  | #define IWL_DEVICE_6005						\ | 
|  | .fw_name_pre = IWL6005_FW_PRE,				\ | 
|  | .ucode_api_max = IWL6000G2_UCODE_API_MAX,		\ | 
|  | .ucode_api_ok = IWL6000G2_UCODE_API_OK,			\ | 
|  | .ucode_api_min = IWL6000G2_UCODE_API_MIN,		\ | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE,			\ | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE,			\ | 
|  | .eeprom_ver = EEPROM_6005_EEPROM_VERSION,		\ | 
|  | .eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\ | 
|  | .lib = &iwl6000_lib,					\ | 
|  | .base_params = &iwl6000_g2_base_params,			\ | 
|  | .need_temp_offset_calib = true,				\ | 
|  | .led_mode = IWL_LED_RF_STATE | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN", | 
|  | IWL_DEVICE_6005, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG", | 
|  | IWL_DEVICE_6005, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6205 BG", | 
|  | IWL_DEVICE_6005, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2agn_sff_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6205S AGN", | 
|  | IWL_DEVICE_6005, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2agn_d_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6205D AGN", | 
|  | IWL_DEVICE_6005, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2agn_mow1_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6206 AGN", | 
|  | IWL_DEVICE_6005, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6005_2agn_mow2_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6207 AGN", | 
|  | IWL_DEVICE_6005, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | #define IWL_DEVICE_6030						\ | 
|  | .fw_name_pre = IWL6030_FW_PRE,				\ | 
|  | .ucode_api_max = IWL6000G2_UCODE_API_MAX,		\ | 
|  | .ucode_api_ok = IWL6000G2B_UCODE_API_OK,		\ | 
|  | .ucode_api_min = IWL6000G2_UCODE_API_MIN,		\ | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE,			\ | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE,			\ | 
|  | .eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\ | 
|  | .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\ | 
|  | .lib = &iwl6030_lib,					\ | 
|  | .base_params = &iwl6000_g2_base_params,			\ | 
|  | .bt_params = &iwl6000_bt_params,			\ | 
|  | .need_temp_offset_calib = true,				\ | 
|  | .led_mode = IWL_LED_RF_STATE,				\ | 
|  | .adv_pm = true						\ | 
|  |  | 
|  | const struct iwl_cfg iwl6030_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN", | 
|  | IWL_DEVICE_6030, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6030_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG", | 
|  | IWL_DEVICE_6030, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6030_2bgn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN", | 
|  | IWL_DEVICE_6030, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6030_2bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6230 BG", | 
|  | IWL_DEVICE_6030, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6035_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6235 AGN", | 
|  | IWL_DEVICE_6030, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl1030_bgn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", | 
|  | IWL_DEVICE_6030, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl1030_bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N 1030 BG", | 
|  | IWL_DEVICE_6030, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl130_bgn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N 130 BGN", | 
|  | IWL_DEVICE_6030, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | .rx_with_siso_diversity = true, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl130_bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N 130 BG", | 
|  | IWL_DEVICE_6030, | 
|  | .rx_with_siso_diversity = true, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * "i": Internal configuration, use internal Power Amplifier | 
|  | */ | 
|  | #define IWL_DEVICE_6000i					\ | 
|  | .fw_name_pre = IWL6000_FW_PRE,				\ | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX,			\ | 
|  | .ucode_api_ok = IWL6000_UCODE_API_OK,			\ | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN,			\ | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE,			\ | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE,			\ | 
|  | .valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\ | 
|  | .valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\ | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION,		\ | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\ | 
|  | .lib = &iwl6000_lib,					\ | 
|  | .additional_nic_config = iwl6000i_additional_nic_config,\ | 
|  | .base_params = &iwl6000_base_params,			\ | 
|  | .led_mode = IWL_LED_BLINK | 
|  |  | 
|  | const struct iwl_cfg iwl6000i_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", | 
|  | IWL_DEVICE_6000i, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6000i_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", | 
|  | IWL_DEVICE_6000i, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6000i_2bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", | 
|  | IWL_DEVICE_6000i, | 
|  | }; | 
|  |  | 
|  | #define IWL_DEVICE_6050						\ | 
|  | .fw_name_pre = IWL6050_FW_PRE,				\ | 
|  | .ucode_api_max = IWL6050_UCODE_API_MAX,			\ | 
|  | .ucode_api_min = IWL6050_UCODE_API_MIN,			\ | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE,			\ | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE,			\ | 
|  | .valid_tx_ant = ANT_AB,		/* .cfg overwrite */	\ | 
|  | .valid_rx_ant = ANT_AB,		/* .cfg overwrite */	\ | 
|  | .lib = &iwl6000_lib,					\ | 
|  | .additional_nic_config = iwl6050_additional_nic_config,	\ | 
|  | .eeprom_ver = EEPROM_6050_EEPROM_VERSION,		\ | 
|  | .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\ | 
|  | .base_params = &iwl6050_base_params,			\ | 
|  | .led_mode = IWL_LED_BLINK,				\ | 
|  | .internal_wimax_coex = true | 
|  |  | 
|  | const struct iwl_cfg iwl6050_2agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", | 
|  | IWL_DEVICE_6050, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6050_2abg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", | 
|  | IWL_DEVICE_6050, | 
|  | }; | 
|  |  | 
|  | #define IWL_DEVICE_6150						\ | 
|  | .fw_name_pre = IWL6050_FW_PRE,				\ | 
|  | .ucode_api_max = IWL6050_UCODE_API_MAX,			\ | 
|  | .ucode_api_min = IWL6050_UCODE_API_MIN,			\ | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE,			\ | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE,			\ | 
|  | .lib = &iwl6000_lib,					\ | 
|  | .additional_nic_config = iwl6150_additional_nic_config,	\ | 
|  | .eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\ | 
|  | .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\ | 
|  | .base_params = &iwl6050_base_params,			\ | 
|  | .led_mode = IWL_LED_BLINK,				\ | 
|  | .internal_wimax_coex = true | 
|  |  | 
|  | const struct iwl_cfg iwl6150_bgn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", | 
|  | IWL_DEVICE_6150, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6150_bg_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", | 
|  | IWL_DEVICE_6150, | 
|  | }; | 
|  |  | 
|  | const struct iwl_cfg iwl6000_3agn_cfg = { | 
|  | .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN", | 
|  | .fw_name_pre = IWL6000_FW_PRE, | 
|  | .ucode_api_max = IWL6000_UCODE_API_MAX, | 
|  | .ucode_api_ok = IWL6000_UCODE_API_OK, | 
|  | .ucode_api_min = IWL6000_UCODE_API_MIN, | 
|  | .max_inst_size = IWL60_RTC_INST_SIZE, | 
|  | .max_data_size = IWL60_RTC_DATA_SIZE, | 
|  | .eeprom_ver = EEPROM_6000_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, | 
|  | .lib = &iwl6000_lib, | 
|  | .base_params = &iwl6000_base_params, | 
|  | .ht_params = &iwl6000_ht_params, | 
|  | .led_mode = IWL_LED_BLINK, | 
|  | }; | 
|  |  | 
|  | MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); | 
|  | MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); | 
|  | MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); | 
|  | MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); |