| /* | 
 |  * usb_a9263.dts - Device Tree file for Caloa USB A9293 board | 
 |  * | 
 |  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 
 |  * | 
 |  * Licensed under GPLv2 only | 
 |  */ | 
 | /dts-v1/; | 
 | /include/ "at91sam9263.dtsi" | 
 |  | 
 | / { | 
 | 	model = "Calao TNY A9263"; | 
 | 	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9"; | 
 |  | 
 | 	chosen { | 
 | 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; | 
 | 	}; | 
 |  | 
 | 	memory { | 
 | 		reg = <0x20000000 0x4000000>; | 
 | 	}; | 
 |  | 
 | 	clocks { | 
 | 		#address-cells = <1>; | 
 | 		#size-cells = <1>; | 
 | 		ranges; | 
 |  | 
 | 		main_clock: clock@0 { | 
 | 			compatible = "atmel,osc", "fixed-clock"; | 
 | 			clock-frequency = <12000000>; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	ahb { | 
 | 		apb { | 
 | 			dbgu: serial@ffffee00 { | 
 | 				status = "okay"; | 
 | 			}; | 
 |  | 
 | 			usb1: gadget@fff78000 { | 
 | 				atmel,vbus-gpio = <&pioB 11 0>; | 
 | 				status = "okay"; | 
 | 			}; | 
 | 		}; | 
 |  | 
 | 		nand0: nand@40000000 { | 
 | 			nand-bus-width = <8>; | 
 | 			nand-ecc-mode = "soft"; | 
 | 			nand-on-flash-bbt; | 
 | 			status = "okay"; | 
 |  | 
 | 			at91bootstrap@0 { | 
 | 				label = "at91bootstrap"; | 
 | 				reg = <0x0 0x20000>; | 
 | 			}; | 
 |  | 
 | 			barebox@20000 { | 
 | 				label = "barebox"; | 
 | 				reg = <0x20000 0x40000>; | 
 | 			}; | 
 |  | 
 | 			bareboxenv@60000 { | 
 | 				label = "bareboxenv"; | 
 | 				reg = <0x60000 0x20000>; | 
 | 			}; | 
 |  | 
 | 			bareboxenv2@80000 { | 
 | 				label = "bareboxenv2"; | 
 | 				reg = <0x80000 0x20000>; | 
 | 			}; | 
 |  | 
 | 			oftree@80000 { | 
 | 				label = "oftree"; | 
 | 				reg = <0xa0000 0x20000>; | 
 | 			}; | 
 |  | 
 | 			kernel@a0000 { | 
 | 				label = "kernel"; | 
 | 				reg = <0xc0000 0x400000>; | 
 | 			}; | 
 |  | 
 | 			rootfs@4a0000 { | 
 | 				label = "rootfs"; | 
 | 				reg = <0x4c0000 0x7800000>; | 
 | 			}; | 
 |  | 
 | 			data@7ca0000 { | 
 | 				label = "data"; | 
 | 				reg = <0x7cc0000 0x8340000>; | 
 | 			}; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	i2c@0 { | 
 | 		status = "okay"; | 
 | 	}; | 
 | }; |