| /* | |
| * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/gpio.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/usb/otg.h> | |
| #include "common.h" | |
| #include "devices-imx31.h" | |
| #include "hardware.h" | |
| #include "iomux-mx3.h" | |
| #include "ulpi.h" | |
| static unsigned int devboard_pins[] = { | |
| /* UART1 */ | |
| MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, | |
| MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, | |
| /* SDHC2 */ | |
| MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, | |
| MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, | |
| MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, | |
| MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, | |
| /* USB H1 */ | |
| MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, | |
| MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, | |
| MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, | |
| MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, | |
| MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, | |
| /* SEL */ | |
| MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, | |
| MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, | |
| }; | |
| static const struct imxuart_platform_data uart_pdata __initconst = { | |
| .flags = IMXUART_HAVE_RTSCTS, | |
| }; | |
| #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) | |
| #define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) | |
| static int devboard_sdhc2_get_ro(struct device *dev) | |
| { | |
| return !gpio_get_value(SDHC2_WP); | |
| } | |
| static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, | |
| void *data) | |
| { | |
| int ret; | |
| ret = gpio_request(SDHC2_CD, "sdhc-detect"); | |
| if (ret) | |
| return ret; | |
| gpio_direction_input(SDHC2_CD); | |
| ret = gpio_request(SDHC2_WP, "sdhc-wp"); | |
| if (ret) | |
| goto err_gpio_free; | |
| gpio_direction_input(SDHC2_WP); | |
| ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, | |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | |
| "sdhc2-card-detect", data); | |
| if (ret) | |
| goto err_gpio_free_2; | |
| return 0; | |
| err_gpio_free_2: | |
| gpio_free(SDHC2_WP); | |
| err_gpio_free: | |
| gpio_free(SDHC2_CD); | |
| return ret; | |
| } | |
| static void devboard_sdhc2_exit(struct device *dev, void *data) | |
| { | |
| free_irq(gpio_to_irq(SDHC2_CD), data); | |
| gpio_free(SDHC2_WP); | |
| gpio_free(SDHC2_CD); | |
| } | |
| static const struct imxmmc_platform_data sdhc2_pdata __initconst = { | |
| .get_ro = devboard_sdhc2_get_ro, | |
| .init = devboard_sdhc2_init, | |
| .exit = devboard_sdhc2_exit, | |
| }; | |
| #define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) | |
| #define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) | |
| #define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) | |
| #define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) | |
| static void devboard_init_sel_gpios(void) | |
| { | |
| if (!gpio_request(SEL0, "sel0")) { | |
| gpio_direction_input(SEL0); | |
| gpio_export(SEL0, true); | |
| } | |
| if (!gpio_request(SEL1, "sel1")) { | |
| gpio_direction_input(SEL1); | |
| gpio_export(SEL1, true); | |
| } | |
| if (!gpio_request(SEL2, "sel2")) { | |
| gpio_direction_input(SEL2); | |
| gpio_export(SEL2, true); | |
| } | |
| if (!gpio_request(SEL3, "sel3")) { | |
| gpio_direction_input(SEL3); | |
| gpio_export(SEL3, true); | |
| } | |
| } | |
| #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ | |
| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) | |
| static int devboard_usbh1_hw_init(struct platform_device *pdev) | |
| { | |
| mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); | |
| mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); | |
| mdelay(10); | |
| return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | | |
| MXC_EHCI_INTERFACE_SINGLE_UNI); | |
| } | |
| #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) | |
| #define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) | |
| static int devboard_isp1105_init(struct usb_phy *otg) | |
| { | |
| int ret = gpio_request(USBH1_MODE, "usbh1-mode"); | |
| if (ret) | |
| return ret; | |
| /* single ended */ | |
| gpio_direction_output(USBH1_MODE, 0); | |
| ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); | |
| if (ret) { | |
| gpio_free(USBH1_MODE); | |
| return ret; | |
| } | |
| gpio_direction_output(USBH1_VBUSEN_B, 1); | |
| return 0; | |
| } | |
| static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on) | |
| { | |
| if (on) | |
| gpio_set_value(USBH1_VBUSEN_B, 0); | |
| else | |
| gpio_set_value(USBH1_VBUSEN_B, 1); | |
| return 0; | |
| } | |
| static struct mxc_usbh_platform_data usbh1_pdata __initdata = { | |
| .init = devboard_usbh1_hw_init, | |
| .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, | |
| }; | |
| static int __init devboard_usbh1_init(void) | |
| { | |
| struct usb_phy *phy; | |
| struct platform_device *pdev; | |
| phy = kzalloc(sizeof(*phy), GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); | |
| if (!phy->otg) { | |
| kfree(phy); | |
| return -ENOMEM; | |
| } | |
| phy->label = "ISP1105"; | |
| phy->init = devboard_isp1105_init; | |
| phy->otg->set_vbus = devboard_isp1105_set_vbus; | |
| usbh1_pdata.otg = phy; | |
| pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); | |
| if (IS_ERR(pdev)) | |
| return PTR_ERR(pdev); | |
| return 0; | |
| } | |
| static const struct fsl_usb2_platform_data usb_pdata __initconst = { | |
| .operating_mode = FSL_USB2_DR_DEVICE, | |
| .phy_mode = FSL_USB2_PHY_ULPI, | |
| }; | |
| /* | |
| * system init for baseboard usage. Will be called by mx31moboard init. | |
| */ | |
| void __init mx31moboard_devboard_init(void) | |
| { | |
| printk(KERN_INFO "Initializing mx31devboard peripherals\n"); | |
| mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), | |
| "devboard"); | |
| imx31_add_imx_uart1(&uart_pdata); | |
| imx31_add_mxc_mmc(1, &sdhc2_pdata); | |
| devboard_init_sel_gpios(); | |
| imx31_add_fsl_usb2_udc(&usb_pdata); | |
| devboard_usbh1_init(); | |
| } |