| /* | |
| * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. | |
| * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> | |
| * | |
| * The code contained herein is licensed under the GNU General Public | |
| * License. You may obtain a copy of the GNU General Public License | |
| * Version 2 or later at the following locations: | |
| * | |
| * http://www.opensource.org/licenses/gpl-license.html | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/io.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/gpio.h> | |
| #include <linux/module.h> | |
| #include <linux/smsc911x.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/fixed.h> | |
| #include "hardware.h" | |
| /* LAN9217 ethernet base address */ | |
| #define LAN9217_BASE_ADDR(n) (n + 0x0) | |
| /* External UART */ | |
| #define UARTA_BASE_ADDR(n) (n + 0x8000) | |
| #define UARTB_BASE_ADDR(n) (n + 0x10000) | |
| #define BOARD_IO_ADDR(n) (n + 0x20000) | |
| /* LED switchs */ | |
| #define LED_SWITCH_REG 0x00 | |
| /* buttons */ | |
| #define SWITCH_BUTTONS_REG 0x08 | |
| /* status, interrupt */ | |
| #define INTR_STATUS_REG 0x10 | |
| #define INTR_MASK_REG 0x38 | |
| #define INTR_RESET_REG 0x20 | |
| /* magic word for debug CPLD */ | |
| #define MAGIC_NUMBER1_REG 0x40 | |
| #define MAGIC_NUMBER2_REG 0x48 | |
| /* CPLD code version */ | |
| #define CPLD_CODE_VER_REG 0x50 | |
| /* magic word for debug CPLD */ | |
| #define MAGIC_NUMBER3_REG 0x58 | |
| /* module reset register*/ | |
| #define MODULE_RESET_REG 0x60 | |
| /* CPU ID and Personality ID */ | |
| #define MCU_BOARD_ID_REG 0x68 | |
| #define MXC_MAX_EXP_IO_LINES 16 | |
| /* interrupts like external uart , external ethernet etc*/ | |
| #define EXPIO_INT_ENET 0 | |
| #define EXPIO_INT_XUART_A 1 | |
| #define EXPIO_INT_XUART_B 2 | |
| #define EXPIO_INT_BUTTON_A 3 | |
| #define EXPIO_INT_BUTTON_B 4 | |
| static void __iomem *brd_io; | |
| static struct irq_domain *domain; | |
| static struct resource smsc911x_resources[] = { | |
| { | |
| .flags = IORESOURCE_MEM, | |
| } , { | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }; | |
| static struct smsc911x_platform_config smsc911x_config = { | |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
| .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, | |
| }; | |
| static struct platform_device smsc_lan9217_device = { | |
| .name = "smsc911x", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &smsc911x_config, | |
| }, | |
| .num_resources = ARRAY_SIZE(smsc911x_resources), | |
| .resource = smsc911x_resources, | |
| }; | |
| static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) | |
| { | |
| u32 imr_val; | |
| u32 int_valid; | |
| u32 expio_irq; | |
| /* irq = gpio irq number */ | |
| desc->irq_data.chip->irq_mask(&desc->irq_data); | |
| imr_val = __raw_readw(brd_io + INTR_MASK_REG); | |
| int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; | |
| expio_irq = 0; | |
| for (; int_valid != 0; int_valid >>= 1, expio_irq++) { | |
| if ((int_valid & 1) == 0) | |
| continue; | |
| generic_handle_irq(irq_find_mapping(domain, expio_irq)); | |
| } | |
| desc->irq_data.chip->irq_ack(&desc->irq_data); | |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); | |
| } | |
| /* | |
| * Disable an expio pin's interrupt by setting the bit in the imr. | |
| * Irq is an expio virtual irq number | |
| */ | |
| static void expio_mask_irq(struct irq_data *d) | |
| { | |
| u16 reg; | |
| u32 expio = d->hwirq; | |
| reg = __raw_readw(brd_io + INTR_MASK_REG); | |
| reg |= (1 << expio); | |
| __raw_writew(reg, brd_io + INTR_MASK_REG); | |
| } | |
| static void expio_ack_irq(struct irq_data *d) | |
| { | |
| u32 expio = d->hwirq; | |
| __raw_writew(1 << expio, brd_io + INTR_RESET_REG); | |
| __raw_writew(0, brd_io + INTR_RESET_REG); | |
| expio_mask_irq(d); | |
| } | |
| static void expio_unmask_irq(struct irq_data *d) | |
| { | |
| u16 reg; | |
| u32 expio = d->hwirq; | |
| reg = __raw_readw(brd_io + INTR_MASK_REG); | |
| reg &= ~(1 << expio); | |
| __raw_writew(reg, brd_io + INTR_MASK_REG); | |
| } | |
| static struct irq_chip expio_irq_chip = { | |
| .irq_ack = expio_ack_irq, | |
| .irq_mask = expio_mask_irq, | |
| .irq_unmask = expio_unmask_irq, | |
| }; | |
| static struct regulator_consumer_supply dummy_supplies[] = { | |
| REGULATOR_SUPPLY("vdd33a", "smsc911x"), | |
| REGULATOR_SUPPLY("vddvario", "smsc911x"), | |
| }; | |
| int __init mxc_expio_init(u32 base, u32 intr_gpio) | |
| { | |
| u32 p_irq = gpio_to_irq(intr_gpio); | |
| int irq_base; | |
| int i; | |
| brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); | |
| if (brd_io == NULL) | |
| return -ENOMEM; | |
| if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || | |
| (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || | |
| (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { | |
| pr_info("3-Stack Debug board not detected\n"); | |
| iounmap(brd_io); | |
| brd_io = NULL; | |
| return -ENODEV; | |
| } | |
| pr_info("3-Stack Debug board detected, rev = 0x%04X\n", | |
| readw(brd_io + CPLD_CODE_VER_REG)); | |
| /* | |
| * Configure INT line as GPIO input | |
| */ | |
| gpio_request(intr_gpio, "expio_pirq"); | |
| gpio_direction_input(intr_gpio); | |
| /* disable the interrupt and clear the status */ | |
| __raw_writew(0, brd_io + INTR_MASK_REG); | |
| __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); | |
| __raw_writew(0, brd_io + INTR_RESET_REG); | |
| __raw_writew(0x1F, brd_io + INTR_MASK_REG); | |
| irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); | |
| WARN_ON(irq_base < 0); | |
| domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, | |
| &irq_domain_simple_ops, NULL); | |
| WARN_ON(!domain); | |
| for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { | |
| irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); | |
| set_irq_flags(i, IRQF_VALID); | |
| } | |
| irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); | |
| irq_set_chained_handler(p_irq, mxc_expio_irq_handler); | |
| /* Register Lan device on the debugboard */ | |
| regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); | |
| smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); | |
| smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; | |
| smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); | |
| smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); | |
| platform_device_register(&smsc_lan9217_device); | |
| return 0; | |
| } |