| /* | |
| * linux/arch/arm/mach-ebsa110/isamem.c | |
| * | |
| * Copyright (C) 2001 Russell King | |
| * | |
| * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities" | |
| * in the way it handles accesses to odd IO ports on 16-bit devices. These | |
| * devices have their D0-D15 lines connected to the processors D0-D15 lines. | |
| * Since they expect all byte IO operations to be performed on D0-D7, and the | |
| * StrongARM expects to transfer the byte to these odd addresses on D8-D15, | |
| * we must use a trick to get the required behaviour. | |
| * | |
| * The trick employed here is to use long word stores to odd address -1. The | |
| * glue logic picks this up as a "trick" access, and asserts the LSB of the | |
| * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the | |
| * StrongARM transfers its data on D0-D7 as expected. | |
| * | |
| * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller | |
| * wiring was screwed in such a way that it had limited memory space access. | |
| * Luckily, the work-around for this is not too horrible. See | |
| * __isamem_convert_addr for the details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/io.h> | |
| #include <mach/hardware.h> | |
| #include <asm/page.h> | |
| static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr) | |
| { | |
| u32 ret, a = (u32 __force) addr; | |
| /* | |
| * The PCMCIA controller is wired up as follows: | |
| * +---------+---------+---------+---------+---------+---------+ | |
| * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | | | |
| * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 | | |
| * +---------+---------+---------+---------+---------+---------+ | |
| * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | | | |
| * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x | | |
| * +---------+---------+---------+---------+---------+---------+ | |
| * | |
| * This means that we can access PCMCIA regions as follows: | |
| * 0x*10000 -> 0x*1ffff | |
| * 0x*70000 -> 0x*7ffff | |
| * 0x*90000 -> 0x*9ffff | |
| * 0x*f0000 -> 0x*fffff | |
| */ | |
| ret = (a & 0xf803fe) << 1; | |
| ret |= (a & 0x03fc00) << 2; | |
| ret += 0xe8000000; | |
| if ((a & 0x20000) == (a & 0x40000) >> 1) | |
| return (void __iomem *)ret; | |
| BUG(); | |
| return NULL; | |
| } | |
| /* | |
| * read[bwl] and write[bwl] | |
| */ | |
| u8 __readb(const volatile void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| u32 ret; | |
| if ((unsigned long)addr & 1) | |
| ret = __raw_readl(a); | |
| else | |
| ret = __raw_readb(a); | |
| return ret; | |
| } | |
| u16 __readw(const volatile void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| if ((unsigned long)addr & 1) | |
| BUG(); | |
| return __raw_readw(a); | |
| } | |
| u32 __readl(const volatile void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| u32 ret; | |
| if ((unsigned long)addr & 3) | |
| BUG(); | |
| ret = __raw_readw(a); | |
| ret |= __raw_readw(a + 4) << 16; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(__readb); | |
| EXPORT_SYMBOL(__readw); | |
| EXPORT_SYMBOL(__readl); | |
| void readsw(const void __iomem *addr, void *data, int len) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| BUG_ON((unsigned long)addr & 1); | |
| __raw_readsw(a, data, len); | |
| } | |
| EXPORT_SYMBOL(readsw); | |
| void readsl(const void __iomem *addr, void *data, int len) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| BUG_ON((unsigned long)addr & 3); | |
| __raw_readsl(a, data, len); | |
| } | |
| EXPORT_SYMBOL(readsl); | |
| void __writeb(u8 val, void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| if ((unsigned long)addr & 1) | |
| __raw_writel(val, a); | |
| else | |
| __raw_writeb(val, a); | |
| } | |
| void __writew(u16 val, void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| if ((unsigned long)addr & 1) | |
| BUG(); | |
| __raw_writew(val, a); | |
| } | |
| void __writel(u32 val, void __iomem *addr) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| if ((unsigned long)addr & 3) | |
| BUG(); | |
| __raw_writew(val, a); | |
| __raw_writew(val >> 16, a + 4); | |
| } | |
| EXPORT_SYMBOL(__writeb); | |
| EXPORT_SYMBOL(__writew); | |
| EXPORT_SYMBOL(__writel); | |
| void writesw(void __iomem *addr, const void *data, int len) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| BUG_ON((unsigned long)addr & 1); | |
| __raw_writesw(a, data, len); | |
| } | |
| EXPORT_SYMBOL(writesw); | |
| void writesl(void __iomem *addr, const void *data, int len) | |
| { | |
| void __iomem *a = __isamem_convert_addr(addr); | |
| BUG_ON((unsigned long)addr & 3); | |
| __raw_writesl(a, data, len); | |
| } | |
| EXPORT_SYMBOL(writesl); | |
| /* | |
| * The EBSA110 has a weird "ISA IO" region: | |
| * | |
| * Region 0 (addr = 0xf0000000 + io << 2) | |
| * -------------------------------------------------------- | |
| * Physical region IO region | |
| * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 | |
| * f0000e60 - f0000e64 398 - 399 | |
| * f0000de0 - f0000dfc 378 - 37f lp0 | |
| * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 | |
| * | |
| * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) | |
| * -------------------------------------------------------- | |
| * Physical region IO region | |
| * f00014f1 a79 pnp write data | |
| * f00007c0 - f00007c1 3e0 - 3e1 pcmcia | |
| * f00004f1 279 pnp address | |
| * f0000440 - f000046c 220 - 236 eth0 | |
| * f0000405 203 pnp read data | |
| */ | |
| #define SUPERIO_PORT(p) \ | |
| (((p) >> 3) == (0x3f8 >> 3) || \ | |
| ((p) >> 3) == (0x2f8 >> 3) || \ | |
| ((p) >> 3) == (0x378 >> 3)) | |
| /* | |
| * We're addressing an 8 or 16-bit peripheral which tranfers | |
| * odd addresses on the low ISA byte lane. | |
| */ | |
| u8 __inb8(unsigned int port) | |
| { | |
| u32 ret; | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2)); | |
| else { | |
| void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); | |
| /* | |
| * Shame nothing else does | |
| */ | |
| if (port & 1) | |
| ret = __raw_readl(a); | |
| else | |
| ret = __raw_readb(a); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * We're addressing a 16-bit peripheral which transfers odd | |
| * addresses on the high ISA byte lane. | |
| */ | |
| u8 __inb16(unsigned int port) | |
| { | |
| unsigned int offset; | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| offset = port << 2; | |
| else | |
| offset = (port & ~1) << 1 | (port & 1); | |
| return __raw_readb((void __iomem *)ISAIO_BASE + offset); | |
| } | |
| u16 __inw(unsigned int port) | |
| { | |
| unsigned int offset; | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| offset = port << 2; | |
| else { | |
| offset = port << 1; | |
| BUG_ON(port & 1); | |
| } | |
| return __raw_readw((void __iomem *)ISAIO_BASE + offset); | |
| } | |
| /* | |
| * Fake a 32-bit read with two 16-bit reads. Needed for 3c589. | |
| */ | |
| u32 __inl(unsigned int port) | |
| { | |
| void __iomem *a; | |
| if (SUPERIO_PORT(port) || port & 3) | |
| BUG(); | |
| a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); | |
| return __raw_readw(a) | __raw_readw(a + 4) << 16; | |
| } | |
| EXPORT_SYMBOL(__inb8); | |
| EXPORT_SYMBOL(__inb16); | |
| EXPORT_SYMBOL(__inw); | |
| EXPORT_SYMBOL(__inl); | |
| void __outb8(u8 val, unsigned int port) | |
| { | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2)); | |
| else { | |
| void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); | |
| /* | |
| * Shame nothing else does | |
| */ | |
| if (port & 1) | |
| __raw_writel(val, a); | |
| else | |
| __raw_writeb(val, a); | |
| } | |
| } | |
| void __outb16(u8 val, unsigned int port) | |
| { | |
| unsigned int offset; | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| offset = port << 2; | |
| else | |
| offset = (port & ~1) << 1 | (port & 1); | |
| __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset); | |
| } | |
| void __outw(u16 val, unsigned int port) | |
| { | |
| unsigned int offset; | |
| /* | |
| * The SuperIO registers use sane addressing techniques... | |
| */ | |
| if (SUPERIO_PORT(port)) | |
| offset = port << 2; | |
| else { | |
| offset = port << 1; | |
| BUG_ON(port & 1); | |
| } | |
| __raw_writew(val, (void __iomem *)ISAIO_BASE + offset); | |
| } | |
| void __outl(u32 val, unsigned int port) | |
| { | |
| BUG(); | |
| } | |
| EXPORT_SYMBOL(__outb8); | |
| EXPORT_SYMBOL(__outb16); | |
| EXPORT_SYMBOL(__outw); | |
| EXPORT_SYMBOL(__outl); | |
| void outsb(unsigned int port, const void *from, int len) | |
| { | |
| u32 off; | |
| if (SUPERIO_PORT(port)) | |
| off = port << 2; | |
| else { | |
| off = (port & ~1) << 1; | |
| if (port & 1) | |
| BUG(); | |
| } | |
| __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len); | |
| } | |
| void insb(unsigned int port, void *from, int len) | |
| { | |
| u32 off; | |
| if (SUPERIO_PORT(port)) | |
| off = port << 2; | |
| else { | |
| off = (port & ~1) << 1; | |
| if (port & 1) | |
| BUG(); | |
| } | |
| __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len); | |
| } | |
| EXPORT_SYMBOL(outsb); | |
| EXPORT_SYMBOL(insb); | |
| void outsw(unsigned int port, const void *from, int len) | |
| { | |
| u32 off; | |
| if (SUPERIO_PORT(port)) | |
| off = port << 2; | |
| else { | |
| off = (port & ~1) << 1; | |
| if (port & 1) | |
| BUG(); | |
| } | |
| __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len); | |
| } | |
| void insw(unsigned int port, void *from, int len) | |
| { | |
| u32 off; | |
| if (SUPERIO_PORT(port)) | |
| off = port << 2; | |
| else { | |
| off = (port & ~1) << 1; | |
| if (port & 1) | |
| BUG(); | |
| } | |
| __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len); | |
| } | |
| EXPORT_SYMBOL(outsw); | |
| EXPORT_SYMBOL(insw); | |
| /* | |
| * We implement these as 16-bit insw/outsw, mainly for | |
| * 3c589 cards. | |
| */ | |
| void outsl(unsigned int port, const void *from, int len) | |
| { | |
| u32 off = port << 1; | |
| if (SUPERIO_PORT(port) || port & 3) | |
| BUG(); | |
| __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1); | |
| } | |
| void insl(unsigned int port, void *from, int len) | |
| { | |
| u32 off = port << 1; | |
| if (SUPERIO_PORT(port) || port & 3) | |
| BUG(); | |
| __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1); | |
| } | |
| EXPORT_SYMBOL(outsl); | |
| EXPORT_SYMBOL(insl); |