|  | /* | 
|  | * ASIX AX8817X based USB 2.0 Ethernet Devices | 
|  | * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> | 
|  | * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> | 
|  | * Copyright (C) 2006 James Painter <jamie.painter@iname.com> | 
|  | * Copyright (c) 2002-2003 TiVo Inc. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | #include "asix.h" | 
|  |  | 
|  | int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, | 
|  | u16 size, void *data, int in_pm) | 
|  | { | 
|  | int ret; | 
|  | int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); | 
|  |  | 
|  | BUG_ON(!dev); | 
|  |  | 
|  | if (!in_pm) | 
|  | fn = usbnet_read_cmd; | 
|  | else | 
|  | fn = usbnet_read_cmd_nopm; | 
|  |  | 
|  | ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | value, index, data, size); | 
|  |  | 
|  | if (unlikely(ret < 0)) | 
|  | netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", | 
|  | index, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, | 
|  | u16 size, void *data, int in_pm) | 
|  | { | 
|  | int ret; | 
|  | int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); | 
|  |  | 
|  | BUG_ON(!dev); | 
|  |  | 
|  | if (!in_pm) | 
|  | fn = usbnet_write_cmd; | 
|  | else | 
|  | fn = usbnet_write_cmd_nopm; | 
|  |  | 
|  | ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | value, index, data, size); | 
|  |  | 
|  | if (unlikely(ret < 0)) | 
|  | netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", | 
|  | index, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, | 
|  | u16 size, void *data) | 
|  | { | 
|  | usbnet_write_cmd_async(dev, cmd, | 
|  | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | value, index, data, size); | 
|  | } | 
|  |  | 
|  | int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb, | 
|  | struct asix_rx_fixup_info *rx) | 
|  | { | 
|  | int offset = 0; | 
|  | u16 size; | 
|  |  | 
|  | /* When an Ethernet frame spans multiple URB socket buffers, | 
|  | * do a sanity test for the Data header synchronisation. | 
|  | * Attempt to detect the situation of the previous socket buffer having | 
|  | * been truncated or a socket buffer was missing. These situations | 
|  | * cause a discontinuity in the data stream and therefore need to avoid | 
|  | * appending bad data to the end of the current netdev socket buffer. | 
|  | * Also avoid unnecessarily discarding a good current netdev socket | 
|  | * buffer. | 
|  | */ | 
|  | if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) { | 
|  | offset = ((rx->remaining + 1) & 0xfffe); | 
|  | rx->header = get_unaligned_le32(skb->data + offset); | 
|  | offset = 0; | 
|  |  | 
|  | size = (u16)(rx->header & 0x7ff); | 
|  | if (size != ((~rx->header >> 16) & 0x7ff)) { | 
|  | netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n", | 
|  | rx->remaining); | 
|  | if (rx->ax_skb) { | 
|  | kfree_skb(rx->ax_skb); | 
|  | rx->ax_skb = NULL; | 
|  | /* Discard the incomplete netdev Ethernet frame | 
|  | * and assume the Data header is at the start of | 
|  | * the current URB socket buffer. | 
|  | */ | 
|  | } | 
|  | rx->remaining = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | while (offset + sizeof(u16) <= skb->len) { | 
|  | u16 copy_length; | 
|  | unsigned char *data; | 
|  |  | 
|  | if (!rx->remaining) { | 
|  | if (skb->len - offset == sizeof(u16)) { | 
|  | rx->header = get_unaligned_le16( | 
|  | skb->data + offset); | 
|  | rx->split_head = true; | 
|  | offset += sizeof(u16); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (rx->split_head == true) { | 
|  | rx->header |= (get_unaligned_le16( | 
|  | skb->data + offset) << 16); | 
|  | rx->split_head = false; | 
|  | offset += sizeof(u16); | 
|  | } else { | 
|  | rx->header = get_unaligned_le32(skb->data + | 
|  | offset); | 
|  | offset += sizeof(u32); | 
|  | } | 
|  |  | 
|  | /* take frame length from Data header 32-bit word */ | 
|  | size = (u16)(rx->header & 0x7ff); | 
|  | if (size != ((~rx->header >> 16) & 0x7ff)) { | 
|  | netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n", | 
|  | rx->header, offset); | 
|  | return 0; | 
|  | } | 
|  | if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) { | 
|  | netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n", | 
|  | size); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Sometimes may fail to get a netdev socket buffer but | 
|  | * continue to process the URB socket buffer so that | 
|  | * synchronisation of the Ethernet frame Data header | 
|  | * word is maintained. | 
|  | */ | 
|  | rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size); | 
|  |  | 
|  | rx->remaining = size; | 
|  | } | 
|  |  | 
|  | if (rx->remaining > skb->len - offset) { | 
|  | copy_length = skb->len - offset; | 
|  | rx->remaining -= copy_length; | 
|  | } else { | 
|  | copy_length = rx->remaining; | 
|  | rx->remaining = 0; | 
|  | } | 
|  |  | 
|  | if (rx->ax_skb) { | 
|  | data = skb_put(rx->ax_skb, copy_length); | 
|  | memcpy(data, skb->data + offset, copy_length); | 
|  | if (!rx->remaining) | 
|  | usbnet_skb_return(dev, rx->ax_skb); | 
|  | } | 
|  |  | 
|  | offset += (copy_length + 1) & 0xfffe; | 
|  | } | 
|  |  | 
|  | if (skb->len != offset) { | 
|  | netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n", | 
|  | skb->len, offset); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct asix_common_private *dp = dev->driver_priv; | 
|  | struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; | 
|  |  | 
|  | return asix_rx_fixup_internal(dev, skb, rx); | 
|  | } | 
|  |  | 
|  | struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, | 
|  | gfp_t flags) | 
|  | { | 
|  | int padlen; | 
|  | int headroom = skb_headroom(skb); | 
|  | int tailroom = skb_tailroom(skb); | 
|  | u32 packet_len; | 
|  | u32 padbytes = 0xffff0000; | 
|  |  | 
|  | padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; | 
|  |  | 
|  | /* We need to push 4 bytes in front of frame (packet_len) | 
|  | * and maybe add 4 bytes after the end (if padlen is 4) | 
|  | * | 
|  | * Avoid skb_copy_expand() expensive call, using following rules : | 
|  | * - We are allowed to push 4 bytes in headroom if skb_header_cloned() | 
|  | *   is false (and if we have 4 bytes of headroom) | 
|  | * - We are allowed to put 4 bytes at tail if skb_cloned() | 
|  | *   is false (and if we have 4 bytes of tailroom) | 
|  | * | 
|  | * TCP packets for example are cloned, but skb_header_release() | 
|  | * was called in tcp stack, allowing us to use headroom for our needs. | 
|  | */ | 
|  | if (!skb_header_cloned(skb) && | 
|  | !(padlen && skb_cloned(skb)) && | 
|  | headroom + tailroom >= 4 + padlen) { | 
|  | /* following should not happen, but better be safe */ | 
|  | if (headroom < 4 || | 
|  | tailroom < padlen) { | 
|  | skb->data = memmove(skb->head + 4, skb->data, skb->len); | 
|  | skb_set_tail_pointer(skb, skb->len); | 
|  | } | 
|  | } else { | 
|  | struct sk_buff *skb2; | 
|  |  | 
|  | skb2 = skb_copy_expand(skb, 4, padlen, flags); | 
|  | dev_kfree_skb_any(skb); | 
|  | skb = skb2; | 
|  | if (!skb) | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; | 
|  | skb_push(skb, 4); | 
|  | cpu_to_le32s(&packet_len); | 
|  | skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); | 
|  |  | 
|  | if (padlen) { | 
|  | cpu_to_le32s(&padbytes); | 
|  | memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); | 
|  | skb_put(skb, sizeof(padbytes)); | 
|  | } | 
|  |  | 
|  | usbnet_set_skb_tx_stats(skb, 1, 0); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | int asix_set_sw_mii(struct usbnet *dev, int in_pm) | 
|  | { | 
|  | int ret; | 
|  | ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm); | 
|  |  | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to enable software MII access\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_set_hw_mii(struct usbnet *dev, int in_pm) | 
|  | { | 
|  | int ret; | 
|  | ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm); | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to enable hardware MII access\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_read_phy_addr(struct usbnet *dev, int internal) | 
|  | { | 
|  | int offset = (internal ? 1 : 0); | 
|  | u8 buf[2]; | 
|  | int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0); | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_get_phy_addr()\n"); | 
|  |  | 
|  | if (ret < 0) { | 
|  | netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); | 
|  | goto out; | 
|  | } | 
|  | netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", | 
|  | *((__le16 *)buf)); | 
|  | ret = buf[offset]; | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_get_phy_addr(struct usbnet *dev) | 
|  | { | 
|  | /* return the address of the internal phy */ | 
|  | return asix_read_phy_addr(dev, 1); | 
|  | } | 
|  |  | 
|  |  | 
|  | int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm); | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm) | 
|  | { | 
|  | __le16 v; | 
|  | int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm); | 
|  |  | 
|  | if (ret < 0) { | 
|  | netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); | 
|  | goto out; | 
|  | } | 
|  | ret = le16_to_cpu(v); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm); | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", | 
|  | mode, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | u16 asix_read_medium_status(struct usbnet *dev, int in_pm) | 
|  | { | 
|  | __le16 v; | 
|  | int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, | 
|  | 0, 0, 2, &v, in_pm); | 
|  |  | 
|  | if (ret < 0) { | 
|  | netdev_err(dev->net, "Error reading Medium Status register: %02x\n", | 
|  | ret); | 
|  | return ret;	/* TODO: callers not checking for error ret */ | 
|  | } | 
|  |  | 
|  | return le16_to_cpu(v); | 
|  |  | 
|  | } | 
|  |  | 
|  | int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, | 
|  | mode, 0, 0, NULL, in_pm); | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", | 
|  | mode, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm); | 
|  | if (ret < 0) | 
|  | netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", | 
|  | value, ret); | 
|  |  | 
|  | if (sleep) | 
|  | msleep(sleep); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * AX88772 & AX88178 have a 16-bit RX_CTL value | 
|  | */ | 
|  | void asix_set_multicast(struct net_device *net) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | struct asix_data *data = (struct asix_data *)&dev->data; | 
|  | u16 rx_ctl = AX_DEFAULT_RX_CTL; | 
|  |  | 
|  | if (net->flags & IFF_PROMISC) { | 
|  | rx_ctl |= AX_RX_CTL_PRO; | 
|  | } else if (net->flags & IFF_ALLMULTI || | 
|  | netdev_mc_count(net) > AX_MAX_MCAST) { | 
|  | rx_ctl |= AX_RX_CTL_AMALL; | 
|  | } else if (netdev_mc_empty(net)) { | 
|  | /* just broadcast and directed */ | 
|  | } else { | 
|  | /* We use the 20 byte dev->data | 
|  | * for our 8 byte filter buffer | 
|  | * to avoid allocating memory that | 
|  | * is tricky to free later */ | 
|  | struct netdev_hw_addr *ha; | 
|  | u32 crc_bits; | 
|  |  | 
|  | memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); | 
|  |  | 
|  | /* Build the multicast hash filter. */ | 
|  | netdev_for_each_mc_addr(ha, net) { | 
|  | crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; | 
|  | data->multi_filter[crc_bits >> 3] |= | 
|  | 1 << (crc_bits & 7); | 
|  | } | 
|  |  | 
|  | asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, | 
|  | AX_MCAST_FILTER_SIZE, data->multi_filter); | 
|  |  | 
|  | rx_ctl |= AX_RX_CTL_AM; | 
|  | } | 
|  |  | 
|  | asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); | 
|  | } | 
|  |  | 
|  | int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res; | 
|  | u8 smsr; | 
|  | int i = 0; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  | do { | 
|  | ret = asix_set_sw_mii(dev, 0); | 
|  | if (ret == -ENODEV || ret == -ETIMEDOUT) | 
|  | break; | 
|  | usleep_range(1000, 1100); | 
|  | ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, | 
|  | 0, 0, 1, &smsr, 0); | 
|  | } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); | 
|  | if (ret == -ENODEV || ret == -ETIMEDOUT) { | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, | 
|  | (__u16)loc, 2, &res, 0); | 
|  | asix_set_hw_mii(dev, 0); | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", | 
|  | phy_id, loc, le16_to_cpu(res)); | 
|  |  | 
|  | return le16_to_cpu(res); | 
|  | } | 
|  |  | 
|  | void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res = cpu_to_le16(val); | 
|  | u8 smsr; | 
|  | int i = 0; | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", | 
|  | phy_id, loc, val); | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  | do { | 
|  | ret = asix_set_sw_mii(dev, 0); | 
|  | if (ret == -ENODEV) | 
|  | break; | 
|  | usleep_range(1000, 1100); | 
|  | ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, | 
|  | 0, 0, 1, &smsr, 0); | 
|  | } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); | 
|  | if (ret == -ENODEV) { | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, | 
|  | (__u16)loc, 2, &res, 0); | 
|  | asix_set_hw_mii(dev, 0); | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | } | 
|  |  | 
|  | int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res; | 
|  | u8 smsr; | 
|  | int i = 0; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  | do { | 
|  | ret = asix_set_sw_mii(dev, 1); | 
|  | if (ret == -ENODEV || ret == -ETIMEDOUT) | 
|  | break; | 
|  | usleep_range(1000, 1100); | 
|  | ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, | 
|  | 0, 0, 1, &smsr, 1); | 
|  | } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); | 
|  | if (ret == -ENODEV || ret == -ETIMEDOUT) { | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, | 
|  | (__u16)loc, 2, &res, 1); | 
|  | asix_set_hw_mii(dev, 1); | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", | 
|  | phy_id, loc, le16_to_cpu(res)); | 
|  |  | 
|  | return le16_to_cpu(res); | 
|  | } | 
|  |  | 
|  | void | 
|  | asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res = cpu_to_le16(val); | 
|  | u8 smsr; | 
|  | int i = 0; | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", | 
|  | phy_id, loc, val); | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  | do { | 
|  | ret = asix_set_sw_mii(dev, 1); | 
|  | if (ret == -ENODEV) | 
|  | break; | 
|  | usleep_range(1000, 1100); | 
|  | ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, | 
|  | 0, 0, 1, &smsr, 1); | 
|  | } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); | 
|  | if (ret == -ENODEV) { | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, | 
|  | (__u16)loc, 2, &res, 1); | 
|  | asix_set_hw_mii(dev, 1); | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | } | 
|  |  | 
|  | void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | u8 opt; | 
|  |  | 
|  | if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, | 
|  | 0, 0, 1, &opt, 0) < 0) { | 
|  | wolinfo->supported = 0; | 
|  | wolinfo->wolopts = 0; | 
|  | return; | 
|  | } | 
|  | wolinfo->supported = WAKE_PHY | WAKE_MAGIC; | 
|  | wolinfo->wolopts = 0; | 
|  | if (opt & AX_MONITOR_LINK) | 
|  | wolinfo->wolopts |= WAKE_PHY; | 
|  | if (opt & AX_MONITOR_MAGIC) | 
|  | wolinfo->wolopts |= WAKE_MAGIC; | 
|  | } | 
|  |  | 
|  | int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | u8 opt = 0; | 
|  |  | 
|  | if (wolinfo->wolopts & WAKE_PHY) | 
|  | opt |= AX_MONITOR_LINK; | 
|  | if (wolinfo->wolopts & WAKE_MAGIC) | 
|  | opt |= AX_MONITOR_MAGIC; | 
|  |  | 
|  | if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, | 
|  | opt, 0, 0, NULL, 0) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int asix_get_eeprom_len(struct net_device *net) | 
|  | { | 
|  | return AX_EEPROM_LEN; | 
|  | } | 
|  |  | 
|  | int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, | 
|  | u8 *data) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | u16 *eeprom_buff; | 
|  | int first_word, last_word; | 
|  | int i; | 
|  |  | 
|  | if (eeprom->len == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | eeprom->magic = AX_EEPROM_MAGIC; | 
|  |  | 
|  | first_word = eeprom->offset >> 1; | 
|  | last_word = (eeprom->offset + eeprom->len - 1) >> 1; | 
|  |  | 
|  | eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), | 
|  | GFP_KERNEL); | 
|  | if (!eeprom_buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* ax8817x returns 2 bytes from eeprom on read */ | 
|  | for (i = first_word; i <= last_word; i++) { | 
|  | if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2, | 
|  | &eeprom_buff[i - first_word], 0) < 0) { | 
|  | kfree(eeprom_buff); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); | 
|  | kfree(eeprom_buff); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, | 
|  | u8 *data) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | u16 *eeprom_buff; | 
|  | int first_word, last_word; | 
|  | int i; | 
|  | int ret; | 
|  |  | 
|  | netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n", | 
|  | eeprom->len, eeprom->offset, eeprom->magic); | 
|  |  | 
|  | if (eeprom->len == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (eeprom->magic != AX_EEPROM_MAGIC) | 
|  | return -EINVAL; | 
|  |  | 
|  | first_word = eeprom->offset >> 1; | 
|  | last_word = (eeprom->offset + eeprom->len - 1) >> 1; | 
|  |  | 
|  | eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), | 
|  | GFP_KERNEL); | 
|  | if (!eeprom_buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* align data to 16 bit boundaries, read the missing data from | 
|  | the EEPROM */ | 
|  | if (eeprom->offset & 1) { | 
|  | ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2, | 
|  | &eeprom_buff[0], 0); | 
|  | if (ret < 0) { | 
|  | netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word); | 
|  | goto free; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((eeprom->offset + eeprom->len) & 1) { | 
|  | ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2, | 
|  | &eeprom_buff[last_word - first_word], 0); | 
|  | if (ret < 0) { | 
|  | netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word); | 
|  | goto free; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len); | 
|  |  | 
|  | /* write data to EEPROM */ | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0); | 
|  | if (ret < 0) { | 
|  | netdev_err(net, "Failed to enable EEPROM write\n"); | 
|  | goto free; | 
|  | } | 
|  | msleep(20); | 
|  |  | 
|  | for (i = first_word; i <= last_word; i++) { | 
|  | netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n", | 
|  | i, eeprom_buff[i - first_word]); | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i, | 
|  | eeprom_buff[i - first_word], 0, NULL, 0); | 
|  | if (ret < 0) { | 
|  | netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", | 
|  | i); | 
|  | goto free; | 
|  | } | 
|  | msleep(20); | 
|  | } | 
|  |  | 
|  | ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0); | 
|  | if (ret < 0) { | 
|  | netdev_err(net, "Failed to disable EEPROM write\n"); | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | free: | 
|  | kfree(eeprom_buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) | 
|  | { | 
|  | /* Inherit standard device info */ | 
|  | usbnet_get_drvinfo(net, info); | 
|  | strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); | 
|  | strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); | 
|  | } | 
|  |  | 
|  | int asix_set_mac_address(struct net_device *net, void *p) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(net); | 
|  | struct asix_data *data = (struct asix_data *)&dev->data; | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | if (netif_running(net)) | 
|  | return -EBUSY; | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); | 
|  |  | 
|  | /* We use the 20 byte dev->data | 
|  | * for our 6 byte mac buffer | 
|  | * to avoid allocating memory that | 
|  | * is tricky to free later */ | 
|  | memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); | 
|  | asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, | 
|  | data->mac_addr); | 
|  |  | 
|  | return 0; | 
|  | } |