| /* | 
 |  *  Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner | 
 |  * | 
 |  *  Copyright (c) 2009 Jochen Friedrich <jochen@scram.de> | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License, or | 
 |  *  (at your option) any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * | 
 |  *  GNU General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License | 
 |  *  along with this program; if not, write to the Free Software | 
 |  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/dvb/frontend.h> | 
 | #include <linux/i2c.h> | 
 |  | 
 | #include "dvb_frontend.h" | 
 |  | 
 | #include "mc44s803.h" | 
 | #include "mc44s803_priv.h" | 
 |  | 
 | #define mc_printk(level, format, arg...)	\ | 
 | 	printk(level "mc44s803: " format , ## arg) | 
 |  | 
 | /* Writes a single register */ | 
 | static int mc44s803_writereg(struct mc44s803_priv *priv, u32 val) | 
 | { | 
 | 	u8 buf[3]; | 
 | 	struct i2c_msg msg = { | 
 | 		.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 3 | 
 | 	}; | 
 |  | 
 | 	buf[0] = (val & 0xff0000) >> 16; | 
 | 	buf[1] = (val & 0xff00) >> 8; | 
 | 	buf[2] = (val & 0xff); | 
 |  | 
 | 	if (i2c_transfer(priv->i2c, &msg, 1) != 1) { | 
 | 		mc_printk(KERN_WARNING, "I2C write failed\n"); | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Reads a single register */ | 
 | static int mc44s803_readreg(struct mc44s803_priv *priv, u8 reg, u32 *val) | 
 | { | 
 | 	u32 wval; | 
 | 	u8 buf[3]; | 
 | 	int ret; | 
 | 	struct i2c_msg msg[] = { | 
 | 		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, | 
 | 		  .buf = buf, .len = 3 }, | 
 | 	}; | 
 |  | 
 | 	wval = MC44S803_REG_SM(MC44S803_REG_DATAREG, MC44S803_ADDR) | | 
 | 	       MC44S803_REG_SM(reg, MC44S803_D); | 
 |  | 
 | 	ret = mc44s803_writereg(priv, wval); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (i2c_transfer(priv->i2c, msg, 1) != 1) { | 
 | 		mc_printk(KERN_WARNING, "I2C read failed\n"); | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 |  | 
 | 	*val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mc44s803_release(struct dvb_frontend *fe) | 
 | { | 
 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 |  | 
 | 	fe->tuner_priv = NULL; | 
 | 	kfree(priv); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mc44s803_init(struct dvb_frontend *fe) | 
 | { | 
 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 	u32 val; | 
 | 	int err; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
 |  | 
 | /* Reset chip */ | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_RS); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | /* Power Up and Start Osc */ | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(0xC0, MC44S803_REFOSC) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_OSCSEL); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_POWER, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(0x200, MC44S803_POWER); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	msleep(10); | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(0x40, MC44S803_REFOSC) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_OSCSEL); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	msleep(20); | 
 |  | 
 | /* Setup Mixer */ | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_MIXER, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_TRI_STATE) | | 
 | 	      MC44S803_REG_SM(0x7F, MC44S803_MIXER_RES); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | /* Setup Cirquit Adjust */ | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G1) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G3) | | 
 | 	      MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G6) | | 
 | 	      MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) | | 
 | 	      MC44S803_REG_SM(0x3, MC44S803_LP) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_CLRF) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_CLIF); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G1) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G3) | | 
 | 	      MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_G6) | | 
 | 	      MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) | | 
 | 	      MC44S803_REG_SM(0x3, MC44S803_LP); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | /* Setup Digtune */ | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(3, MC44S803_XOD); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | /* Setup AGC */ | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_LNAAGC, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AT1) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AT2) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AGC_AN_DIG) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AGC_READ_EN) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_LNA0); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 | 	return 0; | 
 |  | 
 | exit: | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 |  | 
 | 	mc_printk(KERN_WARNING, "I/O Error\n"); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int mc44s803_set_params(struct dvb_frontend *fe, | 
 | 			       struct dvb_frontend_parameters *params) | 
 | { | 
 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 	u32 r1, r2, n1, n2, lo1, lo2, freq, val; | 
 | 	int err; | 
 |  | 
 | 	priv->frequency = params->frequency; | 
 |  | 
 | 	r1 = MC44S803_OSC / 1000000; | 
 | 	r2 = MC44S803_OSC /  100000; | 
 |  | 
 | 	n1 = (params->frequency + MC44S803_IF1 + 500000) / 1000000; | 
 | 	freq = MC44S803_OSC / r1 * n1; | 
 | 	lo1 = ((60 * n1) + (r1 / 2)) / r1; | 
 | 	freq = freq - params->frequency; | 
 |  | 
 | 	n2 = (freq - MC44S803_IF2 + 50000) / 100000; | 
 | 	lo2 = ((60 * n2) + (r2 / 2)) / r2; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_REFDIV, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(r1-1, MC44S803_R1) | | 
 | 	      MC44S803_REG_SM(r2-1, MC44S803_R2) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_REFBUF_EN); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_LO1, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(n1-2, MC44S803_LO1); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_LO2, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(n2-2, MC44S803_LO2); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_DA) | | 
 | 	      MC44S803_REG_SM(lo1, MC44S803_LO_REF) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AT); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) | | 
 | 	      MC44S803_REG_SM(2, MC44S803_DA) | | 
 | 	      MC44S803_REG_SM(lo2, MC44S803_LO_REF) | | 
 | 	      MC44S803_REG_SM(1, MC44S803_AT); | 
 |  | 
 | 	err = mc44s803_writereg(priv, val); | 
 | 	if (err) | 
 | 		goto exit; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 |  | 
 | 	return 0; | 
 |  | 
 | exit: | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 |  | 
 | 	mc_printk(KERN_WARNING, "I/O Error\n"); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int mc44s803_get_frequency(struct dvb_frontend *fe, u32 *frequency) | 
 | { | 
 | 	struct mc44s803_priv *priv = fe->tuner_priv; | 
 | 	*frequency = priv->frequency; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dvb_tuner_ops mc44s803_tuner_ops = { | 
 | 	.info = { | 
 | 		.name           = "Freescale MC44S803", | 
 | 		.frequency_min  =   48000000, | 
 | 		.frequency_max  = 1000000000, | 
 | 		.frequency_step =     100000, | 
 | 	}, | 
 |  | 
 | 	.release       = mc44s803_release, | 
 | 	.init          = mc44s803_init, | 
 | 	.set_params    = mc44s803_set_params, | 
 | 	.get_frequency = mc44s803_get_frequency | 
 | }; | 
 |  | 
 | /* This functions tries to identify a MC44S803 tuner by reading the ID | 
 |    register. This is hasty. */ | 
 | struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe, | 
 | 	 struct i2c_adapter *i2c, struct mc44s803_config *cfg) | 
 | { | 
 | 	struct mc44s803_priv *priv; | 
 | 	u32 reg; | 
 | 	u8 id; | 
 | 	int ret; | 
 |  | 
 | 	reg = 0; | 
 |  | 
 | 	priv = kzalloc(sizeof(struct mc44s803_priv), GFP_KERNEL); | 
 | 	if (priv == NULL) | 
 | 		return NULL; | 
 |  | 
 | 	priv->cfg = cfg; | 
 | 	priv->i2c = i2c; | 
 | 	priv->fe  = fe; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ | 
 |  | 
 | 	ret = mc44s803_readreg(priv, MC44S803_REG_ID, ®); | 
 | 	if (ret) | 
 | 		goto error; | 
 |  | 
 | 	id = MC44S803_REG_MS(reg, MC44S803_ID); | 
 |  | 
 | 	if (id != 0x14) { | 
 | 		mc_printk(KERN_ERR, "unsupported ID " | 
 | 		       "(%x should be 0x14)\n", id); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	mc_printk(KERN_INFO, "successfully identified (ID = %x)\n", id); | 
 | 	memcpy(&fe->ops.tuner_ops, &mc44s803_tuner_ops, | 
 | 	       sizeof(struct dvb_tuner_ops)); | 
 |  | 
 | 	fe->tuner_priv = priv; | 
 |  | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ | 
 |  | 
 | 	return fe; | 
 |  | 
 | error: | 
 | 	if (fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ | 
 |  | 
 | 	kfree(priv); | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(mc44s803_attach); | 
 |  | 
 | MODULE_AUTHOR("Jochen Friedrich"); | 
 | MODULE_DESCRIPTION("Freescale MC44S803 silicon tuner driver"); | 
 | MODULE_LICENSE("GPL"); |