|  | /* | 
|  | * Broadcom B43 wireless driver | 
|  | * | 
|  | * SDIO over Sonics Silicon Backplane bus glue for b43. | 
|  | * | 
|  | * Copyright (C) 2009 Albert Herranz | 
|  | * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or (at | 
|  | * your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/sdio_func.h> | 
|  | #include <linux/mmc/sdio_ids.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/ssb/ssb.h> | 
|  |  | 
|  | #include "sdio.h" | 
|  | #include "b43.h" | 
|  |  | 
|  |  | 
|  | #define HNBU_CHIPID		0x01	/* vendor & device id */ | 
|  |  | 
|  | #define B43_SDIO_BLOCK_SIZE	64	/* rx fifo max size in bytes */ | 
|  |  | 
|  |  | 
|  | static const struct b43_sdio_quirk { | 
|  | u16 vendor; | 
|  | u16 device; | 
|  | unsigned int quirks; | 
|  | } b43_sdio_quirks[] = { | 
|  | { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device) | 
|  | { | 
|  | const struct b43_sdio_quirk *q; | 
|  |  | 
|  | for (q = b43_sdio_quirks; q->quirks; q++) { | 
|  | if (vendor == q->vendor && device == q->device) | 
|  | return q->quirks; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void b43_sdio_interrupt_dispatcher(struct sdio_func *func) | 
|  | { | 
|  | struct b43_sdio *sdio = sdio_get_drvdata(func); | 
|  | struct b43_wldev *dev = sdio->irq_handler_opaque; | 
|  |  | 
|  | if (unlikely(b43_status(dev) < B43_STAT_STARTED)) | 
|  | return; | 
|  |  | 
|  | sdio_release_host(func); | 
|  | sdio->irq_handler(dev); | 
|  | sdio_claim_host(func); | 
|  | } | 
|  |  | 
|  | int b43_sdio_request_irq(struct b43_wldev *dev, | 
|  | void (*handler)(struct b43_wldev *dev)) | 
|  | { | 
|  | struct ssb_bus *bus = dev->dev->bus; | 
|  | struct sdio_func *func = bus->host_sdio; | 
|  | struct b43_sdio *sdio = sdio_get_drvdata(func); | 
|  | int err; | 
|  |  | 
|  | sdio->irq_handler_opaque = dev; | 
|  | sdio->irq_handler = handler; | 
|  | sdio_claim_host(func); | 
|  | err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher); | 
|  | sdio_release_host(func); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void b43_sdio_free_irq(struct b43_wldev *dev) | 
|  | { | 
|  | struct ssb_bus *bus = dev->dev->bus; | 
|  | struct sdio_func *func = bus->host_sdio; | 
|  | struct b43_sdio *sdio = sdio_get_drvdata(func); | 
|  |  | 
|  | sdio_claim_host(func); | 
|  | sdio_release_irq(func); | 
|  | sdio_release_host(func); | 
|  | sdio->irq_handler_opaque = NULL; | 
|  | sdio->irq_handler = NULL; | 
|  | } | 
|  |  | 
|  | static int b43_sdio_probe(struct sdio_func *func, | 
|  | const struct sdio_device_id *id) | 
|  | { | 
|  | struct b43_sdio *sdio; | 
|  | struct sdio_func_tuple *tuple; | 
|  | u16 vendor = 0, device = 0; | 
|  | int error; | 
|  |  | 
|  | /* Look for the card chip identifier. */ | 
|  | tuple = func->tuples; | 
|  | while (tuple) { | 
|  | switch (tuple->code) { | 
|  | case 0x80: | 
|  | switch (tuple->data[0]) { | 
|  | case HNBU_CHIPID: | 
|  | if (tuple->size != 5) | 
|  | break; | 
|  | vendor = tuple->data[1] | (tuple->data[2]<<8); | 
|  | device = tuple->data[3] | (tuple->data[4]<<8); | 
|  | dev_info(&func->dev, "Chip ID %04x:%04x\n", | 
|  | vendor, device); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | tuple = tuple->next; | 
|  | } | 
|  | if (!vendor || !device) { | 
|  | error = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | sdio_claim_host(func); | 
|  | error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE); | 
|  | if (error) { | 
|  | dev_err(&func->dev, "failed to set block size to %u bytes," | 
|  | " error %d\n", B43_SDIO_BLOCK_SIZE, error); | 
|  | goto err_release_host; | 
|  | } | 
|  | error = sdio_enable_func(func); | 
|  | if (error) { | 
|  | dev_err(&func->dev, "failed to enable func, error %d\n", error); | 
|  | goto err_release_host; | 
|  | } | 
|  | sdio_release_host(func); | 
|  |  | 
|  | sdio = kzalloc(sizeof(*sdio), GFP_KERNEL); | 
|  | if (!sdio) { | 
|  | error = -ENOMEM; | 
|  | dev_err(&func->dev, "failed to allocate ssb bus\n"); | 
|  | goto err_disable_func; | 
|  | } | 
|  | error = ssb_bus_sdiobus_register(&sdio->ssb, func, | 
|  | b43_sdio_get_quirks(vendor, device)); | 
|  | if (error) { | 
|  | dev_err(&func->dev, "failed to register ssb sdio bus," | 
|  | " error %d\n", error); | 
|  | goto err_free_ssb; | 
|  | } | 
|  | sdio_set_drvdata(func, sdio); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_ssb: | 
|  | kfree(sdio); | 
|  | err_disable_func: | 
|  | sdio_disable_func(func); | 
|  | err_release_host: | 
|  | sdio_release_host(func); | 
|  | out: | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void b43_sdio_remove(struct sdio_func *func) | 
|  | { | 
|  | struct b43_sdio *sdio = sdio_get_drvdata(func); | 
|  |  | 
|  | ssb_bus_unregister(&sdio->ssb); | 
|  | sdio_disable_func(func); | 
|  | kfree(sdio); | 
|  | sdio_set_drvdata(func, NULL); | 
|  | } | 
|  |  | 
|  | static const struct sdio_device_id b43_sdio_ids[] = { | 
|  | { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */ | 
|  | { SDIO_DEVICE(0x0092, 0x0004) }, /* C-guys, Inc. EW-CG1102GC */ | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct sdio_driver b43_sdio_driver = { | 
|  | .name		= "b43-sdio", | 
|  | .id_table	= b43_sdio_ids, | 
|  | .probe		= b43_sdio_probe, | 
|  | .remove		= b43_sdio_remove, | 
|  | }; | 
|  |  | 
|  | int b43_sdio_init(void) | 
|  | { | 
|  | return sdio_register_driver(&b43_sdio_driver); | 
|  | } | 
|  |  | 
|  | void b43_sdio_exit(void) | 
|  | { | 
|  | sdio_unregister_driver(&b43_sdio_driver); | 
|  | } |