| /* | |
| * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C | |
| * | |
| * Based on code by Randy Vinson <rvinson@mvista.com>, | |
| * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>. | |
| * | |
| * Copyright (C) 2014 Rose Technology | |
| * Copyright (C) 2006-2007 Freescale Semiconductor | |
| * | |
| * 2005 (c) MontaVista Software, Inc. This file is licensed under | |
| * the terms of the GNU General Public License version 2. This program | |
| * is licensed "as is" without any warranty of any kind, whether express | |
| * or implied. | |
| */ | |
| /* | |
| * It would be more efficient to use i2c msgs/i2c_transfer directly but, as | |
| * recommened in .../Documentation/i2c/writing-clients section | |
| * "Sending and receiving", using SMBus level communication is preferred. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/i2c.h> | |
| #include <linux/rtc.h> | |
| #include <linux/bcd.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/slab.h> | |
| #include <linux/pm.h> | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT | |
| #include <linux/fs.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/reboot.h> | |
| #include <linux/watchdog.h> | |
| #endif | |
| #define DS1374_REG_TOD0 0x00 /* Time of Day */ | |
| #define DS1374_REG_TOD1 0x01 | |
| #define DS1374_REG_TOD2 0x02 | |
| #define DS1374_REG_TOD3 0x03 | |
| #define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */ | |
| #define DS1374_REG_WDALM1 0x05 | |
| #define DS1374_REG_WDALM2 0x06 | |
| #define DS1374_REG_CR 0x07 /* Control */ | |
| #define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */ | |
| #define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */ | |
| #define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */ | |
| #define DS1374_REG_SR 0x08 /* Status */ | |
| #define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */ | |
| #define DS1374_REG_SR_AF 0x01 /* Alarm Flag */ | |
| #define DS1374_REG_TCR 0x09 /* Trickle Charge */ | |
| static const struct i2c_device_id ds1374_id[] = { | |
| { "ds1374", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ds1374_id); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id ds1374_of_match[] = { | |
| { .compatible = "dallas,ds1374" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, ds1374_of_match); | |
| #endif | |
| struct ds1374 { | |
| struct i2c_client *client; | |
| struct rtc_device *rtc; | |
| struct work_struct work; | |
| /* The mutex protects alarm operations, and prevents a race | |
| * between the enable_irq() in the workqueue and the free_irq() | |
| * in the remove function. | |
| */ | |
| struct mutex mutex; | |
| int exiting; | |
| }; | |
| static struct i2c_driver ds1374_driver; | |
| static int ds1374_read_rtc(struct i2c_client *client, u32 *time, | |
| int reg, int nbytes) | |
| { | |
| u8 buf[4]; | |
| int ret; | |
| int i; | |
| if (nbytes > 4) { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf); | |
| if (ret < 0) | |
| return ret; | |
| if (ret < nbytes) | |
| return -EIO; | |
| for (i = nbytes - 1, *time = 0; i >= 0; i--) | |
| *time = (*time << 8) | buf[i]; | |
| return 0; | |
| } | |
| static int ds1374_write_rtc(struct i2c_client *client, u32 time, | |
| int reg, int nbytes) | |
| { | |
| u8 buf[4]; | |
| int i; | |
| if (nbytes > 4) { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < nbytes; i++) { | |
| buf[i] = time & 0xff; | |
| time >>= 8; | |
| } | |
| return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf); | |
| } | |
| static int ds1374_check_rtc_status(struct i2c_client *client) | |
| { | |
| int ret = 0; | |
| int control, stat; | |
| stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | |
| if (stat < 0) | |
| return stat; | |
| if (stat & DS1374_REG_SR_OSF) | |
| dev_warn(&client->dev, | |
| "oscillator discontinuity flagged, time unreliable\n"); | |
| stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF); | |
| ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); | |
| if (ret < 0) | |
| return ret; | |
| /* If the alarm is pending, clear it before requesting | |
| * the interrupt, so an interrupt event isn't reported | |
| * before everything is initialized. | |
| */ | |
| control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | |
| if (control < 0) | |
| return control; | |
| control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); | |
| return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); | |
| } | |
| static int ds1374_read_time(struct device *dev, struct rtc_time *time) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| u32 itime; | |
| int ret; | |
| ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4); | |
| if (!ret) | |
| rtc_time_to_tm(itime, time); | |
| return ret; | |
| } | |
| static int ds1374_set_time(struct device *dev, struct rtc_time *time) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned long itime; | |
| rtc_tm_to_time(time, &itime); | |
| return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4); | |
| } | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT | |
| /* The ds1374 has a decrementer for an alarm, rather than a comparator. | |
| * If the time of day is changed, then the alarm will need to be | |
| * reset. | |
| */ | |
| static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ds1374 *ds1374 = i2c_get_clientdata(client); | |
| u32 now, cur_alarm; | |
| int cr, sr; | |
| int ret = 0; | |
| if (client->irq <= 0) | |
| return -EINVAL; | |
| mutex_lock(&ds1374->mutex); | |
| cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | |
| if (ret < 0) | |
| goto out; | |
| sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | |
| if (ret < 0) | |
| goto out; | |
| ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4); | |
| if (ret) | |
| goto out; | |
| ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3); | |
| if (ret) | |
| goto out; | |
| rtc_time_to_tm(now + cur_alarm, &alarm->time); | |
| alarm->enabled = !!(cr & DS1374_REG_CR_WACE); | |
| alarm->pending = !!(sr & DS1374_REG_SR_AF); | |
| out: | |
| mutex_unlock(&ds1374->mutex); | |
| return ret; | |
| } | |
| static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ds1374 *ds1374 = i2c_get_clientdata(client); | |
| struct rtc_time now; | |
| unsigned long new_alarm, itime; | |
| int cr; | |
| int ret = 0; | |
| if (client->irq <= 0) | |
| return -EINVAL; | |
| ret = ds1374_read_time(dev, &now); | |
| if (ret < 0) | |
| return ret; | |
| rtc_tm_to_time(&alarm->time, &new_alarm); | |
| rtc_tm_to_time(&now, &itime); | |
| /* This can happen due to races, in addition to dates that are | |
| * truly in the past. To avoid requiring the caller to check for | |
| * races, dates in the past are assumed to be in the recent past | |
| * (i.e. not something that we'd rather the caller know about via | |
| * an error), and the alarm is set to go off as soon as possible. | |
| */ | |
| if (time_before_eq(new_alarm, itime)) | |
| new_alarm = 1; | |
| else | |
| new_alarm -= itime; | |
| mutex_lock(&ds1374->mutex); | |
| ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | |
| if (ret < 0) | |
| goto out; | |
| /* Disable any existing alarm before setting the new one | |
| * (or lack thereof). */ | |
| cr &= ~DS1374_REG_CR_WACE; | |
| ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); | |
| if (ret < 0) | |
| goto out; | |
| ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3); | |
| if (ret) | |
| goto out; | |
| if (alarm->enabled) { | |
| cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; | |
| cr &= ~DS1374_REG_CR_WDALM; | |
| ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); | |
| } | |
| out: | |
| mutex_unlock(&ds1374->mutex); | |
| return ret; | |
| } | |
| #endif | |
| static irqreturn_t ds1374_irq(int irq, void *dev_id) | |
| { | |
| struct i2c_client *client = dev_id; | |
| struct ds1374 *ds1374 = i2c_get_clientdata(client); | |
| disable_irq_nosync(irq); | |
| schedule_work(&ds1374->work); | |
| return IRQ_HANDLED; | |
| } | |
| static void ds1374_work(struct work_struct *work) | |
| { | |
| struct ds1374 *ds1374 = container_of(work, struct ds1374, work); | |
| struct i2c_client *client = ds1374->client; | |
| int stat, control; | |
| mutex_lock(&ds1374->mutex); | |
| stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | |
| if (stat < 0) | |
| goto unlock; | |
| if (stat & DS1374_REG_SR_AF) { | |
| stat &= ~DS1374_REG_SR_AF; | |
| i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); | |
| control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | |
| if (control < 0) | |
| goto out; | |
| control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); | |
| i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); | |
| rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF); | |
| } | |
| out: | |
| if (!ds1374->exiting) | |
| enable_irq(client->irq); | |
| unlock: | |
| mutex_unlock(&ds1374->mutex); | |
| } | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT | |
| static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ds1374 *ds1374 = i2c_get_clientdata(client); | |
| int ret; | |
| mutex_lock(&ds1374->mutex); | |
| ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | |
| if (ret < 0) | |
| goto out; | |
| if (enabled) { | |
| ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; | |
| ret &= ~DS1374_REG_CR_WDALM; | |
| } else { | |
| ret &= ~DS1374_REG_CR_WACE; | |
| } | |
| ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret); | |
| out: | |
| mutex_unlock(&ds1374->mutex); | |
| return ret; | |
| } | |
| #endif | |
| static const struct rtc_class_ops ds1374_rtc_ops = { | |
| .read_time = ds1374_read_time, | |
| .set_time = ds1374_set_time, | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT | |
| .read_alarm = ds1374_read_alarm, | |
| .set_alarm = ds1374_set_alarm, | |
| .alarm_irq_enable = ds1374_alarm_irq_enable, | |
| #endif | |
| }; | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT | |
| /* | |
| ***************************************************************************** | |
| * | |
| * Watchdog Driver | |
| * | |
| ***************************************************************************** | |
| */ | |
| static struct i2c_client *save_client; | |
| /* Default margin */ | |
| #define WD_TIMO 131762 | |
| #define DRV_NAME "DS1374 Watchdog" | |
| static int wdt_margin = WD_TIMO; | |
| static unsigned long wdt_is_open; | |
| module_param(wdt_margin, int, 0); | |
| MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)"); | |
| static const struct watchdog_info ds1374_wdt_info = { | |
| .identity = "DS1374 WTD", | |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | | |
| WDIOF_MAGICCLOSE, | |
| }; | |
| static int ds1374_wdt_settimeout(unsigned int timeout) | |
| { | |
| int ret = -ENOIOCTLCMD; | |
| int cr; | |
| ret = cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR); | |
| if (ret < 0) | |
| goto out; | |
| /* Disable any existing watchdog/alarm before setting the new one */ | |
| cr &= ~DS1374_REG_CR_WACE; | |
| ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr); | |
| if (ret < 0) | |
| goto out; | |
| /* Set new watchdog time */ | |
| ret = ds1374_write_rtc(save_client, timeout, DS1374_REG_WDALM0, 3); | |
| if (ret) { | |
| pr_info("couldn't set new watchdog time\n"); | |
| goto out; | |
| } | |
| /* Enable watchdog timer */ | |
| cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM; | |
| cr &= ~DS1374_REG_CR_AIE; | |
| ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr); | |
| if (ret < 0) | |
| goto out; | |
| return 0; | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * Reload the watchdog timer. (ie, pat the watchdog) | |
| */ | |
| static void ds1374_wdt_ping(void) | |
| { | |
| u32 val; | |
| int ret = 0; | |
| ret = ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3); | |
| if (ret) | |
| pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret); | |
| } | |
| static void ds1374_wdt_disable(void) | |
| { | |
| int ret = -ENOIOCTLCMD; | |
| int cr; | |
| cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR); | |
| /* Disable watchdog timer */ | |
| cr &= ~DS1374_REG_CR_WACE; | |
| ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr); | |
| } | |
| /* | |
| * Watchdog device is opened, and watchdog starts running. | |
| */ | |
| static int ds1374_wdt_open(struct inode *inode, struct file *file) | |
| { | |
| struct ds1374 *ds1374 = i2c_get_clientdata(save_client); | |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { | |
| mutex_lock(&ds1374->mutex); | |
| if (test_and_set_bit(0, &wdt_is_open)) { | |
| mutex_unlock(&ds1374->mutex); | |
| return -EBUSY; | |
| } | |
| /* | |
| * Activate | |
| */ | |
| wdt_is_open = 1; | |
| mutex_unlock(&ds1374->mutex); | |
| return nonseekable_open(inode, file); | |
| } | |
| return -ENODEV; | |
| } | |
| /* | |
| * Close the watchdog device. | |
| */ | |
| static int ds1374_wdt_release(struct inode *inode, struct file *file) | |
| { | |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) | |
| clear_bit(0, &wdt_is_open); | |
| return 0; | |
| } | |
| /* | |
| * Pat the watchdog whenever device is written to. | |
| */ | |
| static ssize_t ds1374_wdt_write(struct file *file, const char __user *data, | |
| size_t len, loff_t *ppos) | |
| { | |
| if (len) { | |
| ds1374_wdt_ping(); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static ssize_t ds1374_wdt_read(struct file *file, char __user *data, | |
| size_t len, loff_t *ppos) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * Handle commands from user-space. | |
| */ | |
| static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int new_margin, options; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| return copy_to_user((struct watchdog_info __user *)arg, | |
| &ds1374_wdt_info, sizeof(ds1374_wdt_info)) ? -EFAULT : 0; | |
| case WDIOC_GETSTATUS: | |
| case WDIOC_GETBOOTSTATUS: | |
| return put_user(0, (int __user *)arg); | |
| case WDIOC_KEEPALIVE: | |
| ds1374_wdt_ping(); | |
| return 0; | |
| case WDIOC_SETTIMEOUT: | |
| if (get_user(new_margin, (int __user *)arg)) | |
| return -EFAULT; | |
| if (new_margin < 1 || new_margin > 16777216) | |
| return -EINVAL; | |
| wdt_margin = new_margin; | |
| ds1374_wdt_settimeout(new_margin); | |
| ds1374_wdt_ping(); | |
| /* fallthrough */ | |
| case WDIOC_GETTIMEOUT: | |
| return put_user(wdt_margin, (int __user *)arg); | |
| case WDIOC_SETOPTIONS: | |
| if (copy_from_user(&options, (int __user *)arg, sizeof(int))) | |
| return -EFAULT; | |
| if (options & WDIOS_DISABLECARD) { | |
| pr_info("disable watchdog\n"); | |
| ds1374_wdt_disable(); | |
| } | |
| if (options & WDIOS_ENABLECARD) { | |
| pr_info("enable watchdog\n"); | |
| ds1374_wdt_settimeout(wdt_margin); | |
| ds1374_wdt_ping(); | |
| } | |
| return -EINVAL; | |
| } | |
| return -ENOTTY; | |
| } | |
| static long ds1374_wdt_unlocked_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int ret; | |
| struct ds1374 *ds1374 = i2c_get_clientdata(save_client); | |
| mutex_lock(&ds1374->mutex); | |
| ret = ds1374_wdt_ioctl(file, cmd, arg); | |
| mutex_unlock(&ds1374->mutex); | |
| return ret; | |
| } | |
| static int ds1374_wdt_notify_sys(struct notifier_block *this, | |
| unsigned long code, void *unused) | |
| { | |
| if (code == SYS_DOWN || code == SYS_HALT) | |
| /* Disable Watchdog */ | |
| ds1374_wdt_disable(); | |
| return NOTIFY_DONE; | |
| } | |
| static const struct file_operations ds1374_wdt_fops = { | |
| .owner = THIS_MODULE, | |
| .read = ds1374_wdt_read, | |
| .unlocked_ioctl = ds1374_wdt_unlocked_ioctl, | |
| .write = ds1374_wdt_write, | |
| .open = ds1374_wdt_open, | |
| .release = ds1374_wdt_release, | |
| .llseek = no_llseek, | |
| }; | |
| static struct miscdevice ds1374_miscdev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &ds1374_wdt_fops, | |
| }; | |
| static struct notifier_block ds1374_wdt_notifier = { | |
| .notifier_call = ds1374_wdt_notify_sys, | |
| }; | |
| #endif /*CONFIG_RTC_DRV_DS1374_WDT*/ | |
| /* | |
| ***************************************************************************** | |
| * | |
| * Driver Interface | |
| * | |
| ***************************************************************************** | |
| */ | |
| static int ds1374_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct ds1374 *ds1374; | |
| int ret; | |
| ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL); | |
| if (!ds1374) | |
| return -ENOMEM; | |
| ds1374->client = client; | |
| i2c_set_clientdata(client, ds1374); | |
| INIT_WORK(&ds1374->work, ds1374_work); | |
| mutex_init(&ds1374->mutex); | |
| ret = ds1374_check_rtc_status(client); | |
| if (ret) | |
| return ret; | |
| if (client->irq > 0) { | |
| ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0, | |
| "ds1374", client); | |
| if (ret) { | |
| dev_err(&client->dev, "unable to request IRQ\n"); | |
| return ret; | |
| } | |
| device_set_wakeup_capable(&client->dev, 1); | |
| } | |
| ds1374->rtc = devm_rtc_device_register(&client->dev, client->name, | |
| &ds1374_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(ds1374->rtc)) { | |
| dev_err(&client->dev, "unable to register the class device\n"); | |
| return PTR_ERR(ds1374->rtc); | |
| } | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT | |
| save_client = client; | |
| ret = misc_register(&ds1374_miscdev); | |
| if (ret) | |
| return ret; | |
| ret = register_reboot_notifier(&ds1374_wdt_notifier); | |
| if (ret) { | |
| misc_deregister(&ds1374_miscdev); | |
| return ret; | |
| } | |
| ds1374_wdt_settimeout(131072); | |
| #endif | |
| return 0; | |
| } | |
| static int ds1374_remove(struct i2c_client *client) | |
| { | |
| struct ds1374 *ds1374 = i2c_get_clientdata(client); | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT | |
| misc_deregister(&ds1374_miscdev); | |
| ds1374_miscdev.parent = NULL; | |
| unregister_reboot_notifier(&ds1374_wdt_notifier); | |
| #endif | |
| if (client->irq > 0) { | |
| mutex_lock(&ds1374->mutex); | |
| ds1374->exiting = 1; | |
| mutex_unlock(&ds1374->mutex); | |
| devm_free_irq(&client->dev, client->irq, client); | |
| cancel_work_sync(&ds1374->work); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int ds1374_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| if (client->irq > 0 && device_may_wakeup(&client->dev)) | |
| enable_irq_wake(client->irq); | |
| return 0; | |
| } | |
| static int ds1374_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| if (client->irq > 0 && device_may_wakeup(&client->dev)) | |
| disable_irq_wake(client->irq); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume); | |
| static struct i2c_driver ds1374_driver = { | |
| .driver = { | |
| .name = "rtc-ds1374", | |
| .pm = &ds1374_pm, | |
| }, | |
| .probe = ds1374_probe, | |
| .remove = ds1374_remove, | |
| .id_table = ds1374_id, | |
| }; | |
| module_i2c_driver(ds1374_driver); | |
| MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>"); | |
| MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver"); | |
| MODULE_LICENSE("GPL"); |