| /* |
| * Copyright 2007, Google Inc. |
| * Copyright 2012, Intel Inc. |
| * |
| * based on omap.c driver, which was |
| * Copyright (C) 2004 Nokia Corporation |
| * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com> |
| * Misc hacks here and there by Tony Lindgren <tony@atomide.com> |
| * Other hacks (DMA, SD, etc) by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/major.h> |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/hdreg.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/mutex.h> |
| #include <linux/scatterlist.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/timer.h> |
| #include <linux/clk.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #include <asm/types.h> |
| #include <linux/uaccess.h> |
| |
| #define DRIVER_NAME "goldfish_mmc" |
| |
| #define BUFFER_SIZE 16384 |
| |
| #define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr)) |
| #define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr)) |
| |
| enum { |
| /* status register */ |
| MMC_INT_STATUS = 0x00, |
| /* set this to enable IRQ */ |
| MMC_INT_ENABLE = 0x04, |
| /* set this to specify buffer address */ |
| MMC_SET_BUFFER = 0x08, |
| |
| /* MMC command number */ |
| MMC_CMD = 0x0C, |
| |
| /* MMC argument */ |
| MMC_ARG = 0x10, |
| |
| /* MMC response (or R2 bits 0 - 31) */ |
| MMC_RESP_0 = 0x14, |
| |
| /* MMC R2 response bits 32 - 63 */ |
| MMC_RESP_1 = 0x18, |
| |
| /* MMC R2 response bits 64 - 95 */ |
| MMC_RESP_2 = 0x1C, |
| |
| /* MMC R2 response bits 96 - 127 */ |
| MMC_RESP_3 = 0x20, |
| |
| MMC_BLOCK_LENGTH = 0x24, |
| MMC_BLOCK_COUNT = 0x28, |
| |
| /* MMC state flags */ |
| MMC_STATE = 0x2C, |
| |
| /* MMC_INT_STATUS bits */ |
| |
| MMC_STAT_END_OF_CMD = 1U << 0, |
| MMC_STAT_END_OF_DATA = 1U << 1, |
| MMC_STAT_STATE_CHANGE = 1U << 2, |
| MMC_STAT_CMD_TIMEOUT = 1U << 3, |
| |
| /* MMC_STATE bits */ |
| MMC_STATE_INSERTED = 1U << 0, |
| MMC_STATE_READ_ONLY = 1U << 1, |
| }; |
| |
| /* |
| * Command types |
| */ |
| #define OMAP_MMC_CMDTYPE_BC 0 |
| #define OMAP_MMC_CMDTYPE_BCR 1 |
| #define OMAP_MMC_CMDTYPE_AC 2 |
| #define OMAP_MMC_CMDTYPE_ADTC 3 |
| |
| |
| struct goldfish_mmc_host { |
| struct mmc_request *mrq; |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| struct mmc_host *mmc; |
| struct device *dev; |
| unsigned char id; /* 16xx chips have 2 MMC blocks */ |
| void *virt_base; |
| unsigned int phys_base; |
| int irq; |
| unsigned char bus_mode; |
| unsigned char hw_bus_mode; |
| |
| unsigned int sg_len; |
| unsigned dma_done:1; |
| unsigned dma_in_use:1; |
| |
| void __iomem *reg_base; |
| }; |
| |
| static inline int |
| goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host) |
| { |
| return 0; |
| } |
| |
| static ssize_t |
| goldfish_mmc_show_cover_switch(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct goldfish_mmc_host *host = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" : |
| "closed"); |
| } |
| |
| static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL); |
| |
| static void |
| goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd) |
| { |
| u32 cmdreg; |
| u32 resptype; |
| u32 cmdtype; |
| |
| host->cmd = cmd; |
| |
| resptype = 0; |
| cmdtype = 0; |
| |
| /* Our hardware needs to know exact type */ |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_NONE: |
| break; |
| case MMC_RSP_R1: |
| case MMC_RSP_R1B: |
| /* resp 1, 1b, 6, 7 */ |
| resptype = 1; |
| break; |
| case MMC_RSP_R2: |
| resptype = 2; |
| break; |
| case MMC_RSP_R3: |
| resptype = 3; |
| break; |
| default: |
| dev_err(mmc_dev(host->mmc), |
| "Invalid response type: %04x\n", mmc_resp_type(cmd)); |
| break; |
| } |
| |
| if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) |
| cmdtype = OMAP_MMC_CMDTYPE_ADTC; |
| else if (mmc_cmd_type(cmd) == MMC_CMD_BC) |
| cmdtype = OMAP_MMC_CMDTYPE_BC; |
| else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) |
| cmdtype = OMAP_MMC_CMDTYPE_BCR; |
| else |
| cmdtype = OMAP_MMC_CMDTYPE_AC; |
| |
| cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12); |
| |
| if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) |
| cmdreg |= 1 << 6; |
| |
| if (cmd->flags & MMC_RSP_BUSY) |
| cmdreg |= 1 << 11; |
| |
| if (host->data && !(host->data->flags & MMC_DATA_WRITE)) |
| cmdreg |= 1 << 15; |
| |
| GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg); |
| GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg); |
| } |
| |
| static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, |
| struct mmc_data *data) |
| { |
| if (host->dma_in_use) { |
| enum dma_data_direction dma_data_dir; |
| |
| dma_data_dir = mmc_get_dma_dir(data); |
| |
| if (dma_data_dir == DMA_FROM_DEVICE) { |
| /* |
| * We don't really have DMA, so we need |
| * to copy from our platform driver buffer |
| */ |
| sg_copy_from_buffer(data->sg, 1, host->virt_base, |
| data->sg->length); |
| } |
| host->data->bytes_xfered += data->sg->length; |
| dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, |
| dma_data_dir); |
| } |
| |
| host->data = NULL; |
| host->sg_len = 0; |
| |
| /* |
| * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing |
| * dozens of requests until the card finishes writing data. |
| * It'd be cheaper to just wait till an EOFB interrupt arrives... |
| */ |
| |
| if (!data->stop) { |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, data->mrq); |
| return; |
| } |
| |
| goldfish_mmc_start_command(host, data->stop); |
| } |
| |
| static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host, |
| struct mmc_data *data) |
| { |
| if (!host->dma_in_use) { |
| goldfish_mmc_xfer_done(host, data); |
| return; |
| } |
| if (host->dma_done) |
| goldfish_mmc_xfer_done(host, data); |
| } |
| |
| static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host, |
| struct mmc_command *cmd) |
| { |
| host->cmd = NULL; |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) { |
| /* response type 2 */ |
| cmd->resp[3] = |
| GOLDFISH_MMC_READ(host, MMC_RESP_0); |
| cmd->resp[2] = |
| GOLDFISH_MMC_READ(host, MMC_RESP_1); |
| cmd->resp[1] = |
| GOLDFISH_MMC_READ(host, MMC_RESP_2); |
| cmd->resp[0] = |
| GOLDFISH_MMC_READ(host, MMC_RESP_3); |
| } else { |
| /* response types 1, 1b, 3, 4, 5, 6 */ |
| cmd->resp[0] = |
| GOLDFISH_MMC_READ(host, MMC_RESP_0); |
| } |
| } |
| |
| if (host->data == NULL || cmd->error) { |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, cmd->mrq); |
| } |
| } |
| |
| static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) |
| { |
| struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id; |
| u16 status; |
| int end_command = 0; |
| int end_transfer = 0; |
| int state_changed = 0; |
| int cmd_timeout = 0; |
| |
| while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) { |
| GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); |
| |
| if (status & MMC_STAT_END_OF_CMD) |
| end_command = 1; |
| |
| if (status & MMC_STAT_END_OF_DATA) |
| end_transfer = 1; |
| |
| if (status & MMC_STAT_STATE_CHANGE) |
| state_changed = 1; |
| |
| if (status & MMC_STAT_CMD_TIMEOUT) { |
| end_command = 0; |
| cmd_timeout = 1; |
| } |
| } |
| |
| if (cmd_timeout) { |
| struct mmc_request *mrq = host->mrq; |
| mrq->cmd->error = -ETIMEDOUT; |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| if (end_command) |
| goldfish_mmc_cmd_done(host, host->cmd); |
| |
| if (end_transfer) { |
| host->dma_done = 1; |
| goldfish_mmc_end_of_data(host, host->data); |
| } else if (host->data != NULL) { |
| /* |
| * WORKAROUND -- after porting this driver from 2.6 to 3.4, |
| * during device initialization, cases where host->data is |
| * non-null but end_transfer is false would occur. Doing |
| * nothing in such cases results in no further interrupts, |
| * and initialization failure. |
| * TODO -- find the real cause. |
| */ |
| host->dma_done = 1; |
| goldfish_mmc_end_of_data(host, host->data); |
| } |
| |
| if (state_changed) { |
| u32 state = GOLDFISH_MMC_READ(host, MMC_STATE); |
| pr_info("%s: Card detect now %d\n", __func__, |
| (state & MMC_STATE_INSERTED)); |
| mmc_detect_change(host->mmc, 0); |
| } |
| |
| if (!end_command && !end_transfer && !state_changed && !cmd_timeout) { |
| status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS); |
| dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); |
| if (status != 0) { |
| GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); |
| GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, |
| struct mmc_request *req) |
| { |
| struct mmc_data *data = req->data; |
| int block_size; |
| unsigned sg_len; |
| enum dma_data_direction dma_data_dir; |
| |
| host->data = data; |
| if (data == NULL) { |
| GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0); |
| GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0); |
| host->dma_in_use = 0; |
| return; |
| } |
| |
| block_size = data->blksz; |
| |
| GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1); |
| GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1); |
| |
| /* |
| * Cope with calling layer confusion; it issues "single |
| * block" writes using multi-block scatterlists. |
| */ |
| sg_len = (data->blocks == 1) ? 1 : data->sg_len; |
| |
| dma_data_dir = mmc_get_dma_dir(data); |
| |
| host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, |
| sg_len, dma_data_dir); |
| host->dma_done = 0; |
| host->dma_in_use = 1; |
| |
| if (dma_data_dir == DMA_TO_DEVICE) { |
| /* |
| * We don't really have DMA, so we need to copy to our |
| * platform driver buffer |
| */ |
| sg_copy_to_buffer(data->sg, 1, host->virt_base, |
| data->sg->length); |
| } |
| } |
| |
| static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req) |
| { |
| struct goldfish_mmc_host *host = mmc_priv(mmc); |
| |
| WARN_ON(host->mrq != NULL); |
| |
| host->mrq = req; |
| goldfish_mmc_prepare_data(host, req); |
| goldfish_mmc_start_command(host, req->cmd); |
| |
| /* |
| * This is to avoid accidentally being detected as an SDIO card |
| * in mmc_attach_sdio(). |
| */ |
| if (req->cmd->opcode == SD_IO_SEND_OP_COND && |
| req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR)) |
| req->cmd->error = -EINVAL; |
| } |
| |
| static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct goldfish_mmc_host *host = mmc_priv(mmc); |
| |
| host->bus_mode = ios->bus_mode; |
| host->hw_bus_mode = host->bus_mode; |
| } |
| |
| static int goldfish_mmc_get_ro(struct mmc_host *mmc) |
| { |
| uint32_t state; |
| struct goldfish_mmc_host *host = mmc_priv(mmc); |
| |
| state = GOLDFISH_MMC_READ(host, MMC_STATE); |
| return ((state & MMC_STATE_READ_ONLY) != 0); |
| } |
| |
| static const struct mmc_host_ops goldfish_mmc_ops = { |
| .request = goldfish_mmc_request, |
| .set_ios = goldfish_mmc_set_ios, |
| .get_ro = goldfish_mmc_get_ro, |
| }; |
| |
| static int goldfish_mmc_probe(struct platform_device *pdev) |
| { |
| struct mmc_host *mmc; |
| struct goldfish_mmc_host *host = NULL; |
| struct resource *res; |
| int ret = 0; |
| int irq; |
| dma_addr_t buf_addr; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (res == NULL || irq < 0) |
| return -ENXIO; |
| |
| mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev); |
| if (mmc == NULL) { |
| ret = -ENOMEM; |
| goto err_alloc_host_failed; |
| } |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| |
| pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); |
| host->reg_base = ioremap(res->start, resource_size(res)); |
| if (host->reg_base == NULL) { |
| ret = -ENOMEM; |
| goto ioremap_failed; |
| } |
| host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, |
| &buf_addr, GFP_KERNEL); |
| |
| if (host->virt_base == 0) { |
| ret = -ENOMEM; |
| goto dma_alloc_failed; |
| } |
| host->phys_base = buf_addr; |
| |
| host->id = pdev->id; |
| host->irq = irq; |
| |
| mmc->ops = &goldfish_mmc_ops; |
| mmc->f_min = 400000; |
| mmc->f_max = 24000000; |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| mmc->caps = MMC_CAP_4_BIT_DATA; |
| |
| /* Use scatterlist DMA to reduce per-transfer costs. |
| * NOTE max_seg_size assumption that small blocks aren't |
| * normally used (except e.g. for reading SD registers). |
| */ |
| mmc->max_segs = 32; |
| mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */ |
| mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */ |
| mmc->max_req_size = BUFFER_SIZE; |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n"); |
| goto err_request_irq_failed; |
| } |
| |
| host->dev = &pdev->dev; |
| platform_set_drvdata(pdev, host); |
| |
| ret = device_create_file(&pdev->dev, &dev_attr_cover_switch); |
| if (ret) |
| dev_warn(mmc_dev(host->mmc), |
| "Unable to create sysfs attributes\n"); |
| |
| GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base); |
| GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, |
| MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA | |
| MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT); |
| |
| mmc_add_host(mmc); |
| return 0; |
| |
| err_request_irq_failed: |
| dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, |
| host->phys_base); |
| dma_alloc_failed: |
| iounmap(host->reg_base); |
| ioremap_failed: |
| mmc_free_host(host->mmc); |
| err_alloc_host_failed: |
| return ret; |
| } |
| |
| static int goldfish_mmc_remove(struct platform_device *pdev) |
| { |
| struct goldfish_mmc_host *host = platform_get_drvdata(pdev); |
| |
| BUG_ON(host == NULL); |
| |
| mmc_remove_host(host->mmc); |
| free_irq(host->irq, host); |
| dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base); |
| iounmap(host->reg_base); |
| mmc_free_host(host->mmc); |
| return 0; |
| } |
| |
| static struct platform_driver goldfish_mmc_driver = { |
| .probe = goldfish_mmc_probe, |
| .remove = goldfish_mmc_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| }, |
| }; |
| |
| module_platform_driver(goldfish_mmc_driver); |
| MODULE_LICENSE("GPL v2"); |