blob: 40f3903ae5d98a9124efde23d164a65554fb24c8 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Resource Director Technology (RDT)
*
* Pseudo-locking support built on top of Cache Allocation Technology (CAT)
*
* Copyright (C) 2018 Intel Corporation
*
* Author: Reinette Chatre <reinette.chatre@intel.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cacheinfo.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/debugfs.h>
#include <linux/kthread.h>
#include <linux/mman.h>
#include <linux/pm_qos.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/intel-family.h>
#include <asm/intel_rdt_sched.h>
#include <asm/perf_event.h>
#include "intel_rdt.h"
#define CREATE_TRACE_POINTS
#include "intel_rdt_pseudo_lock_event.h"
/*
* MSR_MISC_FEATURE_CONTROL register enables the modification of hardware
* prefetcher state. Details about this register can be found in the MSR
* tables for specific platforms found in Intel's SDM.
*/
#define MSR_MISC_FEATURE_CONTROL 0x000001a4
/*
* The bits needed to disable hardware prefetching varies based on the
* platform. During initialization we will discover which bits to use.
*/
static u64 prefetch_disable_bits;
/*
* Major number assigned to and shared by all devices exposing
* pseudo-locked regions.
*/
static unsigned int pseudo_lock_major;
static unsigned long pseudo_lock_minor_avail = GENMASK(MINORBITS, 0);
static struct class *pseudo_lock_class;
/**
* get_prefetch_disable_bits - prefetch disable bits of supported platforms
*
* Capture the list of platforms that have been validated to support
* pseudo-locking. This includes testing to ensure pseudo-locked regions
* with low cache miss rates can be created under variety of load conditions
* as well as that these pseudo-locked regions can maintain their low cache
* miss rates under variety of load conditions for significant lengths of time.
*
* After a platform has been validated to support pseudo-locking its
* hardware prefetch disable bits are included here as they are documented
* in the SDM.
*
* When adding a platform here also add support for its cache events to
* measure_cycles_perf_fn()
*
* Return:
* If platform is supported, the bits to disable hardware prefetchers, 0
* if platform is not supported.
*/
static u64 get_prefetch_disable_bits(void)
{
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
boot_cpu_data.x86 != 6)
return 0;
switch (boot_cpu_data.x86_model) {
case INTEL_FAM6_BROADWELL_X:
/*
* SDM defines bits of MSR_MISC_FEATURE_CONTROL register
* as:
* 0 L2 Hardware Prefetcher Disable (R/W)
* 1 L2 Adjacent Cache Line Prefetcher Disable (R/W)
* 2 DCU Hardware Prefetcher Disable (R/W)
* 3 DCU IP Prefetcher Disable (R/W)
* 63:4 Reserved
*/
return 0xF;
case INTEL_FAM6_ATOM_GOLDMONT:
case INTEL_FAM6_ATOM_GEMINI_LAKE:
/*
* SDM defines bits of MSR_MISC_FEATURE_CONTROL register
* as:
* 0 L2 Hardware Prefetcher Disable (R/W)
* 1 Reserved
* 2 DCU Hardware Prefetcher Disable (R/W)
* 63:3 Reserved
*/
return 0x5;
}
return 0;
}
/*
* Helper to write 64bit value to MSR without tracing. Used when
* use of the cache should be restricted and use of registers used
* for local variables avoided.
*/
static inline void pseudo_wrmsrl_notrace(unsigned int msr, u64 val)
{
__wrmsr(msr, (u32)(val & 0xffffffffULL), (u32)(val >> 32));
}
/**
* pseudo_lock_minor_get - Obtain available minor number
* @minor: Pointer to where new minor number will be stored
*
* A bitmask is used to track available minor numbers. Here the next free
* minor number is marked as unavailable and returned.
*
* Return: 0 on success, <0 on failure.
*/
static int pseudo_lock_minor_get(unsigned int *minor)
{
unsigned long first_bit;
first_bit = find_first_bit(&pseudo_lock_minor_avail, MINORBITS);
if (first_bit == MINORBITS)
return -ENOSPC;
__clear_bit(first_bit, &pseudo_lock_minor_avail);
*minor = first_bit;
return 0;
}
/**
* pseudo_lock_minor_release - Return minor number to available
* @minor: The minor number made available
*/
static void pseudo_lock_minor_release(unsigned int minor)
{
__set_bit(minor, &pseudo_lock_minor_avail);
}
/**
* region_find_by_minor - Locate a pseudo-lock region by inode minor number
* @minor: The minor number of the device representing pseudo-locked region
*
* When the character device is accessed we need to determine which
* pseudo-locked region it belongs to. This is done by matching the minor
* number of the device to the pseudo-locked region it belongs.
*
* Minor numbers are assigned at the time a pseudo-locked region is associated
* with a cache instance.
*
* Return: On success return pointer to resource group owning the pseudo-locked
* region, NULL on failure.
*/
static struct rdtgroup *region_find_by_minor(unsigned int minor)
{
struct rdtgroup *rdtgrp, *rdtgrp_match = NULL;
list_for_each_entry(rdtgrp, &rdt_all_groups, rdtgroup_list) {
if (rdtgrp->plr && rdtgrp->plr->minor == minor) {
rdtgrp_match = rdtgrp;
break;
}
}
return rdtgrp_match;
}
/**
* pseudo_lock_pm_req - A power management QoS request list entry
* @list: Entry within the @pm_reqs list for a pseudo-locked region
* @req: PM QoS request
*/
struct pseudo_lock_pm_req {
struct list_head list;
struct dev_pm_qos_request req;
};
static void pseudo_lock_cstates_relax(struct pseudo_lock_region *plr)
{
struct pseudo_lock_pm_req *pm_req, *next;
list_for_each_entry_safe(pm_req, next, &plr->pm_reqs, list) {
dev_pm_qos_remove_request(&pm_req->req);
list_del(&pm_req->list);
kfree(pm_req);
}
}
/**
* pseudo_lock_cstates_constrain - Restrict cores from entering C6
*
* To prevent the cache from being affected by power management entering
* C6 has to be avoided. This is accomplished by requesting a latency
* requirement lower than lowest C6 exit latency of all supported
* platforms as found in the cpuidle state tables in the intel_idle driver.
* At this time it is possible to do so with a single latency requirement
* for all supported platforms.
*
* Since Goldmont is supported, which is affected by X86_BUG_MONITOR,
* the ACPI latencies need to be considered while keeping in mind that C2
* may be set to map to deeper sleep states. In this case the latency
* requirement needs to prevent entering C2 also.
*/
static int pseudo_lock_cstates_constrain(struct pseudo_lock_region *plr)
{
struct pseudo_lock_pm_req *pm_req;
int cpu;
int ret;
for_each_cpu(cpu, &plr->d->cpu_mask) {
pm_req = kzalloc(sizeof(*pm_req), GFP_KERNEL);
if (!pm_req) {
rdt_last_cmd_puts("fail allocating mem for PM QoS\n");
ret = -ENOMEM;
goto out_err;
}
ret = dev_pm_qos_add_request(get_cpu_device(cpu),
&pm_req->req,
DEV_PM_QOS_RESUME_LATENCY,
30);
if (ret < 0) {
rdt_last_cmd_printf("fail to add latency req cpu%d\n",
cpu);
kfree(pm_req);
ret = -1;
goto out_err;
}
list_add(&pm_req->list, &plr->pm_reqs);
}
return 0;
out_err:
pseudo_lock_cstates_relax(plr);
return ret;
}
/**
* pseudo_lock_region_clear - Reset pseudo-lock region data
* @plr: pseudo-lock region
*
* All content of the pseudo-locked region is reset - any memory allocated
* freed.
*
* Return: void
*/
static void pseudo_lock_region_clear(struct pseudo_lock_region *plr)
{
plr->size = 0;
plr->line_size = 0;
kfree(plr->kmem);
plr->kmem = NULL;
plr->r = NULL;
if (plr->d)
plr->d->plr = NULL;
plr->d = NULL;
plr->cbm = 0;
plr->debugfs_dir = NULL;
}
/**
* pseudo_lock_region_init - Initialize pseudo-lock region information
* @plr: pseudo-lock region
*
* Called after user provided a schemata to be pseudo-locked. From the
* schemata the &struct pseudo_lock_region is on entry already initialized
* with the resource, domain, and capacity bitmask. Here the information
* required for pseudo-locking is deduced from this data and &struct
* pseudo_lock_region initialized further. This information includes:
* - size in bytes of the region to be pseudo-locked
* - cache line size to know the stride with which data needs to be accessed
* to be pseudo-locked
* - a cpu associated with the cache instance on which the pseudo-locking
* flow can be executed
*
* Return: 0 on success, <0 on failure. Descriptive error will be written
* to last_cmd_status buffer.
*/
static int pseudo_lock_region_init(struct pseudo_lock_region *plr)
{
struct cpu_cacheinfo *ci;
int ret;
int i;
/* Pick the first cpu we find that is associated with the cache. */
plr->cpu = cpumask_first(&plr->d->cpu_mask);
if (!cpu_online(plr->cpu)) {
rdt_last_cmd_printf("cpu %u associated with cache not online\n",
plr->cpu);
ret = -ENODEV;
goto out_region;
}
ci = get_cpu_cacheinfo(plr->cpu);
plr->size = rdtgroup_cbm_to_size(plr->r, plr->d, plr->cbm);
for (i = 0; i < ci->num_leaves; i++) {
if (ci->info_list[i].level == plr->r->cache_level) {
plr->line_size = ci->info_list[i].coherency_line_size;
return 0;
}
}
ret = -1;
rdt_last_cmd_puts("unable to determine cache line size\n");
out_region:
pseudo_lock_region_clear(plr);
return ret;
}
/**
* pseudo_lock_init - Initialize a pseudo-lock region
* @rdtgrp: resource group to which new pseudo-locked region will belong
*
* A pseudo-locked region is associated with a resource group. When this
* association is created the pseudo-locked region is initialized. The
* details of the pseudo-locked region are not known at this time so only
* allocation is done and association established.
*
* Return: 0 on success, <0 on failure
*/
static int pseudo_lock_init(struct rdtgroup *rdtgrp)
{
struct pseudo_lock_region *plr;
plr = kzalloc(sizeof(*plr), GFP_KERNEL);
if (!plr)
return -ENOMEM;
init_waitqueue_head(&plr->lock_thread_wq);
INIT_LIST_HEAD(&plr->pm_reqs);
rdtgrp->plr = plr;
return 0;
}
/**
* pseudo_lock_region_alloc - Allocate kernel memory that will be pseudo-locked
* @plr: pseudo-lock region
*
* Initialize the details required to set up the pseudo-locked region and
* allocate the contiguous memory that will be pseudo-locked to the cache.
*
* Return: 0 on success, <0 on failure. Descriptive error will be written
* to last_cmd_status buffer.
*/
static int pseudo_lock_region_alloc(struct pseudo_lock_region *plr)
{
int ret;
ret = pseudo_lock_region_init(plr);
if (ret < 0)
return ret;
/*
* We do not yet support contiguous regions larger than
* KMALLOC_MAX_SIZE.
*/
if (plr->size > KMALLOC_MAX_SIZE) {
rdt_last_cmd_puts("requested region exceeds maximum size\n");
ret = -E2BIG;
goto out_region;
}
plr->kmem = kzalloc(plr->size, GFP_KERNEL);
if (!plr->kmem) {
rdt_last_cmd_puts("unable to allocate memory\n");
ret = -ENOMEM;
goto out_region;
}
ret = 0;
goto out;
out_region:
pseudo_lock_region_clear(plr);
out:
return ret;
}
/**
* pseudo_lock_free - Free a pseudo-locked region
* @rdtgrp: resource group to which pseudo-locked region belonged
*
* The pseudo-locked region's resources have already been released, or not
* yet created at this point. Now it can be freed and disassociated from the
* resource group.
*
* Return: void
*/
static void pseudo_lock_free(struct rdtgroup *rdtgrp)
{
pseudo_lock_region_clear(rdtgrp->plr);
kfree(rdtgrp->plr);
rdtgrp->plr = NULL;
}
/**
* pseudo_lock_fn - Load kernel memory into cache
* @_rdtgrp: resource group to which pseudo-lock region belongs
*
* This is the core pseudo-locking flow.
*
* First we ensure that the kernel memory cannot be found in the cache.
* Then, while taking care that there will be as little interference as
* possible, the memory to be loaded is accessed while core is running
* with class of service set to the bitmask of the pseudo-locked region.
* After this is complete no future CAT allocations will be allowed to
* overlap with this bitmask.
*
* Local register variables are utilized to ensure that the memory region
* to be locked is the only memory access made during the critical locking
* loop.
*
* Return: 0. Waiter on waitqueue will be woken on completion.
*/
static int pseudo_lock_fn(void *_rdtgrp)
{
struct rdtgroup *rdtgrp = _rdtgrp;
struct pseudo_lock_region *plr = rdtgrp->plr;
u32 rmid_p, closid_p;
unsigned long i;
#ifdef CONFIG_KASAN
/*
* The registers used for local register variables are also used
* when KASAN is active. When KASAN is active we use a regular
* variable to ensure we always use a valid pointer, but the cost
* is that this variable will enter the cache through evicting the
* memory we are trying to lock into the cache. Thus expect lower
* pseudo-locking success rate when KASAN is active.
*/
unsigned int line_size;
unsigned int size;
void *mem_r;
#else
register unsigned int line_size asm("esi");
register unsigned int size asm("edi");
#ifdef CONFIG_X86_64
register void *mem_r asm("rbx");
#else
register void *mem_r asm("ebx");
#endif /* CONFIG_X86_64 */
#endif /* CONFIG_KASAN */
/*
* Make sure none of the allocated memory is cached. If it is we
* will get a cache hit in below loop from outside of pseudo-locked
* region.
* wbinvd (as opposed to clflush/clflushopt) is required to
* increase likelihood that allocated cache portion will be filled
* with associated memory.
*/
native_wbinvd();
/*
* Always called with interrupts enabled. By disabling interrupts
* ensure that we will not be preempted during this critical section.
*/
local_irq_disable();
/*
* Call wrmsr and rdmsr as directly as possible to avoid tracing
* clobbering local register variables or affecting cache accesses.
*
* Disable the hardware prefetcher so that when the end of the memory
* being pseudo-locked is reached the hardware will not read beyond
* the buffer and evict pseudo-locked memory read earlier from the
* cache.
*/
__wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
closid_p = this_cpu_read(pqr_state.cur_closid);
rmid_p = this_cpu_read(pqr_state.cur_rmid);
mem_r = plr->kmem;
size = plr->size;
line_size = plr->line_size;
/*
* Critical section begin: start by writing the closid associated
* with the capacity bitmask of the cache region being
* pseudo-locked followed by reading of kernel memory to load it
* into the cache.
*/
__wrmsr(IA32_PQR_ASSOC, rmid_p, rdtgrp->closid);
/*
* Cache was flushed earlier. Now access kernel memory to read it
* into cache region associated with just activated plr->closid.
* Loop over data twice:
* - In first loop the cache region is shared with the page walker
* as it populates the paging structure caches (including TLB).
* - In the second loop the paging structure caches are used and
* cache region is populated with the memory being referenced.
*/
for (i = 0; i < size; i += PAGE_SIZE) {
/*
* Add a barrier to prevent speculative execution of this
* loop reading beyond the end of the buffer.
*/
rmb();
asm volatile("mov (%0,%1,1), %%eax\n\t"
:
: "r" (mem_r), "r" (i)
: "%eax", "memory");
}
for (i = 0; i < size; i += line_size) {
/*
* Add a barrier to prevent speculative execution of this
* loop reading beyond the end of the buffer.
*/
rmb();
asm volatile("mov (%0,%1,1), %%eax\n\t"
:
: "r" (mem_r), "r" (i)
: "%eax", "memory");
}
/*
* Critical section end: restore closid with capacity bitmask that
* does not overlap with pseudo-locked region.
*/
__wrmsr(IA32_PQR_ASSOC, rmid_p, closid_p);
/* Re-enable the hardware prefetcher(s) */
wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
local_irq_enable();
plr->thread_done = 1;
wake_up_interruptible(&plr->lock_thread_wq);
return 0;
}
/**
* rdtgroup_monitor_in_progress - Test if monitoring in progress
* @r: resource group being queried
*
* Return: 1 if monitor groups have been created for this resource
* group, 0 otherwise.
*/
static int rdtgroup_monitor_in_progress(struct rdtgroup *rdtgrp)
{
return !list_empty(&rdtgrp->mon.crdtgrp_list);
}
/**
* rdtgroup_locksetup_user_restrict - Restrict user access to group
* @rdtgrp: resource group needing access restricted
*
* A resource group used for cache pseudo-locking cannot have cpus or tasks
* assigned to it. This is communicated to the user by restricting access
* to all the files that can be used to make such changes.
*
* Permissions restored with rdtgroup_locksetup_user_restore()
*
* Return: 0 on success, <0 on failure. If a failure occurs during the
* restriction of access an attempt will be made to restore permissions but
* the state of the mode of these files will be uncertain when a failure
* occurs.
*/
static int rdtgroup_locksetup_user_restrict(struct rdtgroup *rdtgrp)
{
int ret;
ret = rdtgroup_kn_mode_restrict(rdtgrp, "tasks");
if (ret)
return ret;
ret = rdtgroup_kn_mode_restrict(rdtgrp, "cpus");
if (ret)
goto err_tasks;
ret = rdtgroup_kn_mode_restrict(rdtgrp, "cpus_list");
if (ret)
goto err_cpus;
if (rdt_mon_capable) {
ret = rdtgroup_kn_mode_restrict(rdtgrp, "mon_groups");
if (ret)
goto err_cpus_list;
}
ret = 0;
goto out;
err_cpus_list:
rdtgroup_kn_mode_restore(rdtgrp, "cpus_list", 0777);
err_cpus:
rdtgroup_kn_mode_restore(rdtgrp, "cpus", 0777);
err_tasks:
rdtgroup_kn_mode_restore(rdtgrp, "tasks", 0777);
out:
return ret;
}
/**
* rdtgroup_locksetup_user_restore - Restore user access to group
* @rdtgrp: resource group needing access restored
*
* Restore all file access previously removed using
* rdtgroup_locksetup_user_restrict()
*
* Return: 0 on success, <0 on failure. If a failure occurs during the
* restoration of access an attempt will be made to restrict permissions
* again but the state of the mode of these files will be uncertain when
* a failure occurs.
*/
static int rdtgroup_locksetup_user_restore(struct rdtgroup *rdtgrp)
{
int ret;
ret = rdtgroup_kn_mode_restore(rdtgrp, "tasks", 0777);
if (ret)
return ret;
ret = rdtgroup_kn_mode_restore(rdtgrp, "cpus", 0777);
if (ret)
goto err_tasks;
ret = rdtgroup_kn_mode_restore(rdtgrp, "cpus_list", 0777);
if (ret)
goto err_cpus;
if (rdt_mon_capable) {
ret = rdtgroup_kn_mode_restore(rdtgrp, "mon_groups", 0777);
if (ret)
goto err_cpus_list;
}
ret = 0;
goto out;
err_cpus_list:
rdtgroup_kn_mode_restrict(rdtgrp, "cpus_list");
err_cpus:
rdtgroup_kn_mode_restrict(rdtgrp, "cpus");
err_tasks:
rdtgroup_kn_mode_restrict(rdtgrp, "tasks");
out:
return ret;
}
/**
* rdtgroup_locksetup_enter - Resource group enters locksetup mode
* @rdtgrp: resource group requested to enter locksetup mode
*
* A resource group enters locksetup mode to reflect that it would be used
* to represent a pseudo-locked region and is in the process of being set
* up to do so. A resource group used for a pseudo-locked region would
* lose the closid associated with it so we cannot allow it to have any
* tasks or cpus assigned nor permit tasks or cpus to be assigned in the
* future. Monitoring of a pseudo-locked region is not allowed either.
*
* The above and more restrictions on a pseudo-locked region are checked
* for and enforced before the resource group enters the locksetup mode.
*
* Returns: 0 if the resource group successfully entered locksetup mode, <0
* on failure. On failure the last_cmd_status buffer is updated with text to
* communicate details of failure to the user.
*/
int rdtgroup_locksetup_enter(struct rdtgroup *rdtgrp)
{
int ret;
/*
* The default resource group can neither be removed nor lose the
* default closid associated with it.
*/
if (rdtgrp == &rdtgroup_default) {
rdt_last_cmd_puts("cannot pseudo-lock default group\n");
return -EINVAL;
}
/*
* Cache Pseudo-locking not supported when CDP is enabled.
*
* Some things to consider if you would like to enable this
* support (using L3 CDP as example):
* - When CDP is enabled two separate resources are exposed,
* L3DATA and L3CODE, but they are actually on the same cache.
* The implication for pseudo-locking is that if a
* pseudo-locked region is created on a domain of one
* resource (eg. L3CODE), then a pseudo-locked region cannot
* be created on that same domain of the other resource
* (eg. L3DATA). This is because the creation of a
* pseudo-locked region involves a call to wbinvd that will
* affect all cache allocations on particular domain.
* - Considering the previous, it may be possible to only
* expose one of the CDP resources to pseudo-locking and
* hide the other. For example, we could consider to only
* expose L3DATA and since the L3 cache is unified it is
* still possible to place instructions there are execute it.
* - If only one region is exposed to pseudo-locking we should
* still keep in mind that availability of a portion of cache
* for pseudo-locking should take into account both resources.
* Similarly, if a pseudo-locked region is created in one
* resource, the portion of cache used by it should be made
* unavailable to all future allocations from both resources.
*/
if (rdt_resources_all[RDT_RESOURCE_L3DATA].alloc_enabled ||
rdt_resources_all[RDT_RESOURCE_L2DATA].alloc_enabled) {
rdt_last_cmd_puts("CDP enabled\n");
return -EINVAL;
}
/*
* Not knowing the bits to disable prefetching implies that this
* platform does not support Cache Pseudo-Locking.
*/
prefetch_disable_bits = get_prefetch_disable_bits();
if (prefetch_disable_bits == 0) {
rdt_last_cmd_puts("pseudo-locking not supported\n");
return -EINVAL;
}
if (rdtgroup_monitor_in_progress(rdtgrp)) {
rdt_last_cmd_puts("monitoring in progress\n");
return -EINVAL;
}
if (rdtgroup_tasks_assigned(rdtgrp)) {
rdt_last_cmd_puts("tasks assigned to resource group\n");
return -EINVAL;
}
if (!cpumask_empty(&rdtgrp->cpu_mask)) {
rdt_last_cmd_puts("CPUs assigned to resource group\n");
return -EINVAL;
}
if (rdtgroup_locksetup_user_restrict(rdtgrp)) {
rdt_last_cmd_puts("unable to modify resctrl permissions\n");
return -EIO;
}
ret = pseudo_lock_init(rdtgrp);
if (ret) {
rdt_last_cmd_puts("unable to init pseudo-lock region\n");
goto out_release;
}
/*
* If this system is capable of monitoring a rmid would have been
* allocated when the control group was created. This is not needed
* anymore when this group would be used for pseudo-locking. This
* is safe to call on platforms not capable of monitoring.
*/
free_rmid(rdtgrp->mon.rmid);
ret = 0;
goto out;
out_release:
rdtgroup_locksetup_user_restore(rdtgrp);
out:
return ret;
}
/**
* rdtgroup_locksetup_exit - resource group exist locksetup mode
* @rdtgrp: resource group
*
* When a resource group exits locksetup mode the earlier restrictions are
* lifted.
*
* Return: 0 on success, <0 on failure
*/
int rdtgroup_locksetup_exit(struct rdtgroup *rdtgrp)
{
int ret;
if (rdt_mon_capable) {
ret = alloc_rmid();
if (ret < 0) {
rdt_last_cmd_puts("out of RMIDs\n");
return ret;
}
rdtgrp->mon.rmid = ret;
}
ret = rdtgroup_locksetup_user_restore(rdtgrp);
if (ret) {
free_rmid(rdtgrp->mon.rmid);
return ret;
}
pseudo_lock_free(rdtgrp);
return 0;
}
/**
* rdtgroup_cbm_overlaps_pseudo_locked - Test if CBM or portion is pseudo-locked
* @d: RDT domain
* @_cbm: CBM to test
*
* @d represents a cache instance and @_cbm a capacity bitmask that is
* considered for it. Determine if @_cbm overlaps with any existing
* pseudo-locked region on @d.
*
* Return: true if @_cbm overlaps with pseudo-locked region on @d, false
* otherwise.
*/
bool rdtgroup_cbm_overlaps_pseudo_locked(struct rdt_domain *d, u32 _cbm)
{
unsigned long *cbm = (unsigned long *)&_cbm;
unsigned long *cbm_b;
unsigned int cbm_len;
if (d->plr) {
cbm_len = d->plr->r->cache.cbm_len;
cbm_b = (unsigned long *)&d->plr->cbm;
if (bitmap_intersects(cbm, cbm_b, cbm_len))
return true;
}
return false;
}
/**
* rdtgroup_pseudo_locked_in_hierarchy - Pseudo-locked region in cache hierarchy
* @d: RDT domain under test
*
* The setup of a pseudo-locked region affects all cache instances within
* the hierarchy of the region. It is thus essential to know if any
* pseudo-locked regions exist within a cache hierarchy to prevent any
* attempts to create new pseudo-locked regions in the same hierarchy.
*
* Return: true if a pseudo-locked region exists in the hierarchy of @d or
* if it is not possible to test due to memory allocation issue,
* false otherwise.
*/
bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d)
{
cpumask_var_t cpu_with_psl;
struct rdt_resource *r;
struct rdt_domain *d_i;
bool ret = false;
if (!zalloc_cpumask_var(&cpu_with_psl, GFP_KERNEL))
return true;
/*
* First determine which cpus have pseudo-locked regions
* associated with them.
*/
for_each_alloc_enabled_rdt_resource(r) {
list_for_each_entry(d_i, &r->domains, list) {
if (d_i->plr)
cpumask_or(cpu_with_psl, cpu_with_psl,
&d_i->cpu_mask);
}
}
/*
* Next test if new pseudo-locked region would intersect with
* existing region.
*/
if (cpumask_intersects(&d->cpu_mask, cpu_with_psl))
ret = true;
free_cpumask_var(cpu_with_psl);
return ret;
}
/**
* measure_cycles_lat_fn - Measure cycle latency to read pseudo-locked memory
* @_plr: pseudo-lock region to measure
*
* There is no deterministic way to test if a memory region is cached. One
* way is to measure how long it takes to read the memory, the speed of
* access is a good way to learn how close to the cpu the data was. Even
* more, if the prefetcher is disabled and the memory is read at a stride
* of half the cache line, then a cache miss will be easy to spot since the
* read of the first half would be significantly slower than the read of
* the second half.
*
* Return: 0. Waiter on waitqueue will be woken on completion.
*/
static int measure_cycles_lat_fn(void *_plr)
{
struct pseudo_lock_region *plr = _plr;
unsigned long i;
u64 start, end;
#ifdef CONFIG_KASAN
/*
* The registers used for local register variables are also used
* when KASAN is active. When KASAN is active we use a regular
* variable to ensure we always use a valid pointer to access memory.
* The cost is that accessing this pointer, which could be in
* cache, will be included in the measurement of memory read latency.
*/
void *mem_r;
#else
#ifdef CONFIG_X86_64
register void *mem_r asm("rbx");
#else
register void *mem_r asm("ebx");
#endif /* CONFIG_X86_64 */
#endif /* CONFIG_KASAN */
local_irq_disable();
/*
* The wrmsr call may be reordered with the assignment below it.
* Call wrmsr as directly as possible to avoid tracing clobbering
* local register variable used for memory pointer.
*/
__wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
mem_r = plr->kmem;
/*
* Dummy execute of the time measurement to load the needed
* instructions into the L1 instruction cache.
*/
start = rdtsc_ordered();
for (i = 0; i < plr->size; i += 32) {
start = rdtsc_ordered();
asm volatile("mov (%0,%1,1), %%eax\n\t"
:
: "r" (mem_r), "r" (i)
: "%eax", "memory");
end = rdtsc_ordered();
trace_pseudo_lock_mem_latency((u32)(end - start));
}
wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
local_irq_enable();
plr->thread_done = 1;
wake_up_interruptible(&plr->lock_thread_wq);
return 0;
}
static int measure_cycles_perf_fn(void *_plr)
{
unsigned long long l3_hits = 0, l3_miss = 0;
u64 l3_hit_bits = 0, l3_miss_bits = 0;
struct pseudo_lock_region *plr = _plr;
unsigned long long l2_hits, l2_miss;
u64 l2_hit_bits, l2_miss_bits;
unsigned long i;
#ifdef CONFIG_KASAN
/*
* The registers used for local register variables are also used
* when KASAN is active. When KASAN is active we use regular variables
* at the cost of including cache access latency to these variables
* in the measurements.
*/
unsigned int line_size;
unsigned int size;
void *mem_r;
#else
register unsigned int line_size asm("esi");
register unsigned int size asm("edi");
#ifdef CONFIG_X86_64
register void *mem_r asm("rbx");
#else
register void *mem_r asm("ebx");
#endif /* CONFIG_X86_64 */
#endif /* CONFIG_KASAN */
/*
* Non-architectural event for the Goldmont Microarchitecture
* from Intel x86 Architecture Software Developer Manual (SDM):
* MEM_LOAD_UOPS_RETIRED D1H (event number)
* Umask values:
* L1_HIT 01H
* L2_HIT 02H
* L1_MISS 08H
* L2_MISS 10H
*
* On Broadwell Microarchitecture the MEM_LOAD_UOPS_RETIRED event
* has two "no fix" errata associated with it: BDM35 and BDM100. On
* this platform we use the following events instead:
* L2_RQSTS 24H (Documented in https://download.01.org/perfmon/BDW/)
* REFERENCES FFH
* MISS 3FH
* LONGEST_LAT_CACHE 2EH (Documented in SDM)
* REFERENCE 4FH
* MISS 41H
*/
/*
* Start by setting flags for IA32_PERFEVTSELx:
* OS (Operating system mode) 0x2
* INT (APIC interrupt enable) 0x10
* EN (Enable counter) 0x40
*
* Then add the Umask value and event number to select performance
* event.
*/
switch (boot_cpu_data.x86_model) {
case INTEL_FAM6_ATOM_GOLDMONT:
case INTEL_FAM6_ATOM_GEMINI_LAKE:
l2_hit_bits = (0x52ULL << 16) | (0x2 << 8) | 0xd1;
l2_miss_bits = (0x52ULL << 16) | (0x10 << 8) | 0xd1;
break;
case INTEL_FAM6_BROADWELL_X:
/* On BDW the l2_hit_bits count references, not hits */
l2_hit_bits = (0x52ULL << 16) | (0xff << 8) | 0x24;
l2_miss_bits = (0x52ULL << 16) | (0x3f << 8) | 0x24;
/* On BDW the l3_hit_bits count references, not hits */
l3_hit_bits = (0x52ULL << 16) | (0x4f << 8) | 0x2e;
l3_miss_bits = (0x52ULL << 16) | (0x41 << 8) | 0x2e;
break;
default:
goto out;
}
local_irq_disable();
/*
* Call wrmsr direcly to avoid the local register variables from
* being overwritten due to reordering of their assignment with
* the wrmsr calls.
*/
__wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
/* Disable events and reset counters */
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 1, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_PERFCTR0, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_PERFCTR0 + 1, 0x0);
if (l3_hit_bits > 0) {
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 2, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 3, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_PERFCTR0 + 2, 0x0);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_PERFCTR0 + 3, 0x0);
}
/* Set and enable the L2 counters */
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0, l2_hit_bits);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 1, l2_miss_bits);
if (l3_hit_bits > 0) {
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 2,
l3_hit_bits);
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 3,
l3_miss_bits);
}
mem_r = plr->kmem;
size = plr->size;
line_size = plr->line_size;
for (i = 0; i < size; i += line_size) {
asm volatile("mov (%0,%1,1), %%eax\n\t"
:
: "r" (mem_r), "r" (i)
: "%eax", "memory");
}
/*
* Call wrmsr directly (no tracing) to not influence
* the cache access counters as they are disabled.
*/
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0,
l2_hit_bits & ~(0x40ULL << 16));
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 1,
l2_miss_bits & ~(0x40ULL << 16));
if (l3_hit_bits > 0) {
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 2,
l3_hit_bits & ~(0x40ULL << 16));
pseudo_wrmsrl_notrace(MSR_ARCH_PERFMON_EVENTSEL0 + 3,
l3_miss_bits & ~(0x40ULL << 16));
}
l2_hits = native_read_pmc(0);
l2_miss = native_read_pmc(1);
if (l3_hit_bits > 0) {
l3_hits = native_read_pmc(2);
l3_miss = native_read_pmc(3);
}
wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
local_irq_enable();
/*
* On BDW we count references and misses, need to adjust. Sometimes
* the "hits" counter is a bit more than the references, for
* example, x references but x + 1 hits. To not report invalid
* hit values in this case we treat that as misses eaqual to
* references.
*/
if (boot_cpu_data.x86_model == INTEL_FAM6_BROADWELL_X)
l2_hits -= (l2_miss > l2_hits ? l2_hits : l2_miss);
trace_pseudo_lock_l2(l2_hits, l2_miss);
if (l3_hit_bits > 0) {
if (boot_cpu_data.x86_model == INTEL_FAM6_BROADWELL_X)
l3_hits -= (l3_miss > l3_hits ? l3_hits : l3_miss);
trace_pseudo_lock_l3(l3_hits, l3_miss);
}
out:
plr->thread_done = 1;
wake_up_interruptible(&plr->lock_thread_wq);
return 0;
}
/**
* pseudo_lock_measure_cycles - Trigger latency measure to pseudo-locked region
*
* The measurement of latency to access a pseudo-locked region should be
* done from a cpu that is associated with that pseudo-locked region.
* Determine which cpu is associated with this region and start a thread on
* that cpu to perform the measurement, wait for that thread to complete.
*
* Return: 0 on success, <0 on failure
*/
static int pseudo_lock_measure_cycles(struct rdtgroup *rdtgrp, int sel)
{
struct pseudo_lock_region *plr = rdtgrp->plr;
struct task_struct *thread;
unsigned int cpu;
int ret = -1;
cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
if (rdtgrp->flags & RDT_DELETED) {
ret = -ENODEV;
goto out;
}
plr->thread_done = 0;
cpu = cpumask_first(&plr->d->cpu_mask);
if (!cpu_online(cpu)) {
ret = -ENODEV;
goto out;
}
if (sel == 1)
thread = kthread_create_on_node(measure_cycles_lat_fn, plr,
cpu_to_node(cpu),
"pseudo_lock_measure/%u",
cpu);
else if (sel == 2)
thread = kthread_create_on_node(measure_cycles_perf_fn, plr,
cpu_to_node(cpu),
"pseudo_lock_measure/%u",
cpu);
else
goto out;
if (IS_ERR(thread)) {
ret = PTR_ERR(thread);
goto out;
}
kthread_bind(thread, cpu);
wake_up_process(thread);
ret = wait_event_interruptible(plr->lock_thread_wq,
plr->thread_done == 1);
if (ret < 0)
goto out;
ret = 0;
out:
mutex_unlock(&rdtgroup_mutex);
cpus_read_unlock();
return ret;
}
static ssize_t pseudo_lock_measure_trigger(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct rdtgroup *rdtgrp = file->private_data;
size_t buf_size;
char buf[32];
int ret;
int sel;
buf_size = min(count, (sizeof(buf) - 1));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
buf[buf_size] = '\0';
ret = kstrtoint(buf, 10, &sel);
if (ret == 0) {
if (sel != 1)
return -EINVAL;
ret = debugfs_file_get(file->f_path.dentry);
if (ret)
return ret;
ret = pseudo_lock_measure_cycles(rdtgrp, sel);
if (ret == 0)
ret = count;
debugfs_file_put(file->f_path.dentry);
}
return ret;
}
static const struct file_operations pseudo_measure_fops = {
.write = pseudo_lock_measure_trigger,
.open = simple_open,
.llseek = default_llseek,
};
/**
* rdtgroup_pseudo_lock_create - Create a pseudo-locked region
* @rdtgrp: resource group to which pseudo-lock region belongs
*
* Called when a resource group in the pseudo-locksetup mode receives a
* valid schemata that should be pseudo-locked. Since the resource group is
* in pseudo-locksetup mode the &struct pseudo_lock_region has already been
* allocated and initialized with the essential information. If a failure
* occurs the resource group remains in the pseudo-locksetup mode with the
* &struct pseudo_lock_region associated with it, but cleared from all
* information and ready for the user to re-attempt pseudo-locking by
* writing the schemata again.
*
* Return: 0 if the pseudo-locked region was successfully pseudo-locked, <0
* on failure. Descriptive error will be written to last_cmd_status buffer.
*/
int rdtgroup_pseudo_lock_create(struct rdtgroup *rdtgrp)
{
struct pseudo_lock_region *plr = rdtgrp->plr;
struct task_struct *thread;
unsigned int new_minor;
struct device *dev;
int ret;
ret = pseudo_lock_region_alloc(plr);
if (ret < 0)
return ret;
ret = pseudo_lock_cstates_constrain(plr);
if (ret < 0) {
ret = -EINVAL;
goto out_region;
}
plr->thread_done = 0;
thread = kthread_create_on_node(pseudo_lock_fn, rdtgrp,
cpu_to_node(plr->cpu),
"pseudo_lock/%u", plr->cpu);
if (IS_ERR(thread)) {
ret = PTR_ERR(thread);
rdt_last_cmd_printf("locking thread returned error %d\n", ret);
goto out_cstates;
}
kthread_bind(thread, plr->cpu);
wake_up_process(thread);
ret = wait_event_interruptible(plr->lock_thread_wq,
plr->thread_done == 1);
if (ret < 0) {
/*
* If the thread does not get on the CPU for whatever
* reason and the process which sets up the region is
* interrupted then this will leave the thread in runnable
* state and once it gets on the CPU it will derefence
* the cleared, but not freed, plr struct resulting in an
* empty pseudo-locking loop.
*/
rdt_last_cmd_puts("locking thread interrupted\n");
goto out_cstates;
}
ret = pseudo_lock_minor_get(&new_minor);
if (ret < 0) {
rdt_last_cmd_puts("unable to obtain a new minor number\n");
goto out_cstates;
}
/*
* Unlock access but do not release the reference. The
* pseudo-locked region will still be here on return.
*
* The mutex has to be released temporarily to avoid a potential
* deadlock with the mm->mmap_sem semaphore which is obtained in
* the device_create() and debugfs_create_dir() callpath below
* as well as before the mmap() callback is called.
*/
mutex_unlock(&rdtgroup_mutex);
if (!IS_ERR_OR_NULL(debugfs_resctrl)) {
plr->debugfs_dir = debugfs_create_dir(rdtgrp->kn->name,
debugfs_resctrl);
if (!IS_ERR_OR_NULL(plr->debugfs_dir))
debugfs_create_file("pseudo_lock_measure", 0200,
plr->debugfs_dir, rdtgrp,
&pseudo_measure_fops);
}
dev = device_create(pseudo_lock_class, NULL,
MKDEV(pseudo_lock_major, new_minor),
rdtgrp, "%s", rdtgrp->kn->name);
mutex_lock(&rdtgroup_mutex);
if (IS_ERR(dev)) {
ret = PTR_ERR(dev);
rdt_last_cmd_printf("failed to create character device: %d\n",
ret);
goto out_debugfs;
}
/* We released the mutex - check if group was removed while we did so */
if (rdtgrp->flags & RDT_DELETED) {
ret = -ENODEV;
goto out_device;
}
plr->minor = new_minor;
rdtgrp->mode = RDT_MODE_PSEUDO_LOCKED;
closid_free(rdtgrp->closid);
rdtgroup_kn_mode_restore(rdtgrp, "cpus", 0444);
rdtgroup_kn_mode_restore(rdtgrp, "cpus_list", 0444);
ret = 0;
goto out;
out_device:
device_destroy(pseudo_lock_class, MKDEV(pseudo_lock_major, new_minor));
out_debugfs:
debugfs_remove_recursive(plr->debugfs_dir);
pseudo_lock_minor_release(new_minor);
out_cstates:
pseudo_lock_cstates_relax(plr);
out_region:
pseudo_lock_region_clear(plr);
out:
return ret;
}
/**
* rdtgroup_pseudo_lock_remove - Remove a pseudo-locked region
* @rdtgrp: resource group to which the pseudo-locked region belongs
*
* The removal of a pseudo-locked region can be initiated when the resource
* group is removed from user space via a "rmdir" from userspace or the
* unmount of the resctrl filesystem. On removal the resource group does
* not go back to pseudo-locksetup mode before it is removed, instead it is
* removed directly. There is thus assymmetry with the creation where the
* &struct pseudo_lock_region is removed here while it was not created in
* rdtgroup_pseudo_lock_create().
*
* Return: void
*/
void rdtgroup_pseudo_lock_remove(struct rdtgroup *rdtgrp)
{
struct pseudo_lock_region *plr = rdtgrp->plr;
if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP) {
/*
* Default group cannot be a pseudo-locked region so we can
* free closid here.
*/
closid_free(rdtgrp->closid);
goto free;
}
pseudo_lock_cstates_relax(plr);
debugfs_remove_recursive(rdtgrp->plr->debugfs_dir);
device_destroy(pseudo_lock_class, MKDEV(pseudo_lock_major, plr->minor));
pseudo_lock_minor_release(plr->minor);
free:
pseudo_lock_free(rdtgrp);
}
static int pseudo_lock_dev_open(struct inode *inode, struct file *filp)
{
struct rdtgroup *rdtgrp;
mutex_lock(&rdtgroup_mutex);
rdtgrp = region_find_by_minor(iminor(inode));
if (!rdtgrp) {
mutex_unlock(&rdtgroup_mutex);
return -ENODEV;
}
filp->private_data = rdtgrp;
atomic_inc(&rdtgrp->waitcount);
/* Perform a non-seekable open - llseek is not supported */
filp->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE);
mutex_unlock(&rdtgroup_mutex);
return 0;
}
static int pseudo_lock_dev_release(struct inode *inode, struct file *filp)
{
struct rdtgroup *rdtgrp;
mutex_lock(&rdtgroup_mutex);
rdtgrp = filp->private_data;
WARN_ON(!rdtgrp);
if (!rdtgrp) {
mutex_unlock(&rdtgroup_mutex);
return -ENODEV;
}
filp->private_data = NULL;
atomic_dec(&rdtgrp->waitcount);
mutex_unlock(&rdtgroup_mutex);
return 0;
}
static int pseudo_lock_dev_mremap(struct vm_area_struct *area)
{
/* Not supported */
return -EINVAL;
}
static const struct vm_operations_struct pseudo_mmap_ops = {
.mremap = pseudo_lock_dev_mremap,
};
static int pseudo_lock_dev_mmap(struct file *filp, struct vm_area_struct *vma)
{
unsigned long vsize = vma->vm_end - vma->vm_start;
unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
struct pseudo_lock_region *plr;
struct rdtgroup *rdtgrp;
unsigned long physical;
unsigned long psize;
mutex_lock(&rdtgroup_mutex);
rdtgrp = filp->private_data;
WARN_ON(!rdtgrp);
if (!rdtgrp) {
mutex_unlock(&rdtgroup_mutex);
return -ENODEV;
}
plr = rdtgrp->plr;
/*
* Task is required to run with affinity to the cpus associated
* with the pseudo-locked region. If this is not the case the task
* may be scheduled elsewhere and invalidate entries in the
* pseudo-locked region.
*/
if (!cpumask_subset(&current->cpus_allowed, &plr->d->cpu_mask)) {
mutex_unlock(&rdtgroup_mutex);
return -EINVAL;
}
physical = __pa(plr->kmem) >> PAGE_SHIFT;
psize = plr->size - off;
if (off > plr->size) {
mutex_unlock(&rdtgroup_mutex);
return -ENOSPC;
}
/*
* Ensure changes are carried directly to the memory being mapped,
* do not allow copy-on-write mapping.
*/
if (!(vma->vm_flags & VM_SHARED)) {
mutex_unlock(&rdtgroup_mutex);
return -EINVAL;
}
if (vsize > psize) {
mutex_unlock(&rdtgroup_mutex);
return -ENOSPC;
}
memset(plr->kmem + off, 0, vsize);
if (remap_pfn_range(vma, vma->vm_start, physical + vma->vm_pgoff,
vsize, vma->vm_page_prot)) {
mutex_unlock(&rdtgroup_mutex);
return -EAGAIN;
}
vma->vm_ops = &pseudo_mmap_ops;
mutex_unlock(&rdtgroup_mutex);
return 0;
}
static const struct file_operations pseudo_lock_dev_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = NULL,
.write = NULL,
.open = pseudo_lock_dev_open,
.release = pseudo_lock_dev_release,
.mmap = pseudo_lock_dev_mmap,
};
static char *pseudo_lock_devnode(struct device *dev, umode_t *mode)
{
struct rdtgroup *rdtgrp;
rdtgrp = dev_get_drvdata(dev);
if (mode)
*mode = 0600;
return kasprintf(GFP_KERNEL, "pseudo_lock/%s", rdtgrp->kn->name);
}
int rdt_pseudo_lock_init(void)
{
int ret;
ret = register_chrdev(0, "pseudo_lock", &pseudo_lock_dev_fops);
if (ret < 0)
return ret;
pseudo_lock_major = ret;
pseudo_lock_class = class_create(THIS_MODULE, "pseudo_lock");
if (IS_ERR(pseudo_lock_class)) {
ret = PTR_ERR(pseudo_lock_class);
unregister_chrdev(pseudo_lock_major, "pseudo_lock");
return ret;
}
pseudo_lock_class->devnode = pseudo_lock_devnode;
return 0;
}
void rdt_pseudo_lock_release(void)
{
class_destroy(pseudo_lock_class);
pseudo_lock_class = NULL;
unregister_chrdev(pseudo_lock_major, "pseudo_lock");
pseudo_lock_major = 0;
}