| #include <linux/pci.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/ioport.h> | |
| #include <linux/wait.h> | |
| #include "pci.h" | |
| /* | |
| * This interrupt-safe spinlock protects all accesses to PCI | |
| * configuration space. | |
| */ | |
| static DEFINE_SPINLOCK(pci_lock); | |
| /* | |
| * Wrappers for all PCI configuration access functions. They just check | |
| * alignment, do locking and call the low-level functions pointed to | |
| * by pci_dev->ops. | |
| */ | |
| #define PCI_byte_BAD 0 | |
| #define PCI_word_BAD (pos & 1) | |
| #define PCI_dword_BAD (pos & 3) | |
| #define PCI_OP_READ(size,type,len) \ | |
| int pci_bus_read_config_##size \ | |
| (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ | |
| { \ | |
| int res; \ | |
| unsigned long flags; \ | |
| u32 data = 0; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| spin_lock_irqsave(&pci_lock, flags); \ | |
| res = bus->ops->read(bus, devfn, pos, len, &data); \ | |
| *value = (type)data; \ | |
| spin_unlock_irqrestore(&pci_lock, flags); \ | |
| return res; \ | |
| } | |
| #define PCI_OP_WRITE(size,type,len) \ | |
| int pci_bus_write_config_##size \ | |
| (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ | |
| { \ | |
| int res; \ | |
| unsigned long flags; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| spin_lock_irqsave(&pci_lock, flags); \ | |
| res = bus->ops->write(bus, devfn, pos, len, value); \ | |
| spin_unlock_irqrestore(&pci_lock, flags); \ | |
| return res; \ | |
| } | |
| PCI_OP_READ(byte, u8, 1) | |
| PCI_OP_READ(word, u16, 2) | |
| PCI_OP_READ(dword, u32, 4) | |
| PCI_OP_WRITE(byte, u8, 1) | |
| PCI_OP_WRITE(word, u16, 2) | |
| PCI_OP_WRITE(dword, u32, 4) | |
| EXPORT_SYMBOL(pci_bus_read_config_byte); | |
| EXPORT_SYMBOL(pci_bus_read_config_word); | |
| EXPORT_SYMBOL(pci_bus_read_config_dword); | |
| EXPORT_SYMBOL(pci_bus_write_config_byte); | |
| EXPORT_SYMBOL(pci_bus_write_config_word); | |
| EXPORT_SYMBOL(pci_bus_write_config_dword); | |
| /* | |
| * The following routines are to prevent the user from accessing PCI config | |
| * space when it's unsafe to do so. Some devices require this during BIST and | |
| * we're required to prevent it during D-state transitions. | |
| * | |
| * We have a bit per device to indicate it's blocked and a global wait queue | |
| * for callers to sleep on until devices are unblocked. | |
| */ | |
| static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); | |
| static noinline void pci_wait_ucfg(struct pci_dev *dev) | |
| { | |
| DECLARE_WAITQUEUE(wait, current); | |
| __add_wait_queue(&pci_ucfg_wait, &wait); | |
| do { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| spin_unlock_irq(&pci_lock); | |
| schedule(); | |
| spin_lock_irq(&pci_lock); | |
| } while (dev->block_ucfg_access); | |
| __remove_wait_queue(&pci_ucfg_wait, &wait); | |
| } | |
| #define PCI_USER_READ_CONFIG(size,type) \ | |
| int pci_user_read_config_##size \ | |
| (struct pci_dev *dev, int pos, type *val) \ | |
| { \ | |
| int ret = 0; \ | |
| u32 data = -1; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| spin_lock_irq(&pci_lock); \ | |
| if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ | |
| ret = dev->bus->ops->read(dev->bus, dev->devfn, \ | |
| pos, sizeof(type), &data); \ | |
| spin_unlock_irq(&pci_lock); \ | |
| *val = (type)data; \ | |
| return ret; \ | |
| } | |
| #define PCI_USER_WRITE_CONFIG(size,type) \ | |
| int pci_user_write_config_##size \ | |
| (struct pci_dev *dev, int pos, type val) \ | |
| { \ | |
| int ret = -EIO; \ | |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ | |
| spin_lock_irq(&pci_lock); \ | |
| if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ | |
| ret = dev->bus->ops->write(dev->bus, dev->devfn, \ | |
| pos, sizeof(type), val); \ | |
| spin_unlock_irq(&pci_lock); \ | |
| return ret; \ | |
| } | |
| PCI_USER_READ_CONFIG(byte, u8) | |
| PCI_USER_READ_CONFIG(word, u16) | |
| PCI_USER_READ_CONFIG(dword, u32) | |
| PCI_USER_WRITE_CONFIG(byte, u8) | |
| PCI_USER_WRITE_CONFIG(word, u16) | |
| PCI_USER_WRITE_CONFIG(dword, u32) | |
| /** | |
| * pci_block_user_cfg_access - Block userspace PCI config reads/writes | |
| * @dev: pci device struct | |
| * | |
| * When user access is blocked, any reads or writes to config space will | |
| * sleep until access is unblocked again. We don't allow nesting of | |
| * block/unblock calls. | |
| */ | |
| void pci_block_user_cfg_access(struct pci_dev *dev) | |
| { | |
| unsigned long flags; | |
| int was_blocked; | |
| spin_lock_irqsave(&pci_lock, flags); | |
| was_blocked = dev->block_ucfg_access; | |
| dev->block_ucfg_access = 1; | |
| spin_unlock_irqrestore(&pci_lock, flags); | |
| /* If we BUG() inside the pci_lock, we're guaranteed to hose | |
| * the machine */ | |
| BUG_ON(was_blocked); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); | |
| /** | |
| * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes | |
| * @dev: pci device struct | |
| * | |
| * This function allows userspace PCI config accesses to resume. | |
| */ | |
| void pci_unblock_user_cfg_access(struct pci_dev *dev) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&pci_lock, flags); | |
| /* This indicates a problem in the caller, but we don't need | |
| * to kill them, unlike a double-block above. */ | |
| WARN_ON(!dev->block_ucfg_access); | |
| dev->block_ucfg_access = 0; | |
| wake_up_all(&pci_ucfg_wait); | |
| spin_unlock_irqrestore(&pci_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); |