| /* | |
| * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com) | |
| * Licensed under the GPL | |
| */ | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| #include <errno.h> | |
| #include <sched.h> | |
| #include <signal.h> | |
| #include <termios.h> | |
| #include <sys/ioctl.h> | |
| #include "chan_user.h" | |
| #include "kern_constants.h" | |
| #include "os.h" | |
| #include "um_malloc.h" | |
| #include "user.h" | |
| void generic_close(int fd, void *unused) | |
| { | |
| close(fd); | |
| } | |
| int generic_read(int fd, char *c_out, void *unused) | |
| { | |
| int n; | |
| n = read(fd, c_out, sizeof(*c_out)); | |
| if (n > 0) | |
| return n; | |
| else if (errno == EAGAIN) | |
| return 0; | |
| else if (n == 0) | |
| return -EIO; | |
| return -errno; | |
| } | |
| /* XXX Trivial wrapper around write */ | |
| int generic_write(int fd, const char *buf, int n, void *unused) | |
| { | |
| int err; | |
| err = write(fd, buf, n); | |
| if (err > 0) | |
| return err; | |
| else if (errno == EAGAIN) | |
| return 0; | |
| else if (err == 0) | |
| return -EIO; | |
| return -errno; | |
| } | |
| int generic_window_size(int fd, void *unused, unsigned short *rows_out, | |
| unsigned short *cols_out) | |
| { | |
| struct winsize size; | |
| int ret; | |
| if (ioctl(fd, TIOCGWINSZ, &size) < 0) | |
| return -errno; | |
| ret = ((*rows_out != size.ws_row) || (*cols_out != size.ws_col)); | |
| *rows_out = size.ws_row; | |
| *cols_out = size.ws_col; | |
| return ret; | |
| } | |
| void generic_free(void *data) | |
| { | |
| kfree(data); | |
| } | |
| int generic_console_write(int fd, const char *buf, int n) | |
| { | |
| sigset_t old, no_sigio; | |
| struct termios save, new; | |
| int err; | |
| if (isatty(fd)) { | |
| sigemptyset(&no_sigio); | |
| sigaddset(&no_sigio, SIGIO); | |
| if (sigprocmask(SIG_BLOCK, &no_sigio, &old)) | |
| goto error; | |
| CATCH_EINTR(err = tcgetattr(fd, &save)); | |
| if (err) | |
| goto error; | |
| new = save; | |
| /* | |
| * The terminal becomes a bit less raw, to handle \n also as | |
| * "Carriage Return", not only as "New Line". Otherwise, the new | |
| * line won't start at the first column. | |
| */ | |
| new.c_oflag |= OPOST; | |
| CATCH_EINTR(err = tcsetattr(fd, TCSAFLUSH, &new)); | |
| if (err) | |
| goto error; | |
| } | |
| err = generic_write(fd, buf, n, NULL); | |
| /* | |
| * Restore raw mode, in any case; we *must* ignore any error apart | |
| * EINTR, except for debug. | |
| */ | |
| if (isatty(fd)) { | |
| CATCH_EINTR(tcsetattr(fd, TCSAFLUSH, &save)); | |
| sigprocmask(SIG_SETMASK, &old, NULL); | |
| } | |
| return err; | |
| error: | |
| return -errno; | |
| } | |
| /* | |
| * UML SIGWINCH handling | |
| * | |
| * The point of this is to handle SIGWINCH on consoles which have host | |
| * ttys and relay them inside UML to whatever might be running on the | |
| * console and cares about the window size (since SIGWINCH notifies | |
| * about terminal size changes). | |
| * | |
| * So, we have a separate thread for each host tty attached to a UML | |
| * device (side-issue - I'm annoyed that one thread can't have | |
| * multiple controlling ttys for the purpose of handling SIGWINCH, but | |
| * I imagine there are other reasons that doesn't make any sense). | |
| * | |
| * SIGWINCH can't be received synchronously, so you have to set up to | |
| * receive it as a signal. That being the case, if you are going to | |
| * wait for it, it is convenient to sit in sigsuspend() and wait for | |
| * the signal to bounce you out of it (see below for how we make sure | |
| * to exit only on SIGWINCH). | |
| */ | |
| static void winch_handler(int sig) | |
| { | |
| } | |
| struct winch_data { | |
| int pty_fd; | |
| int pipe_fd; | |
| }; | |
| static int winch_thread(void *arg) | |
| { | |
| struct winch_data *data = arg; | |
| sigset_t sigs; | |
| int pty_fd, pipe_fd; | |
| int count; | |
| char c = 1; | |
| pty_fd = data->pty_fd; | |
| pipe_fd = data->pipe_fd; | |
| count = write(pipe_fd, &c, sizeof(c)); | |
| if (count != sizeof(c)) | |
| printk(UM_KERN_ERR "winch_thread : failed to write " | |
| "synchronization byte, err = %d\n", -count); | |
| /* | |
| * We are not using SIG_IGN on purpose, so don't fix it as I thought to | |
| * do! If using SIG_IGN, the sigsuspend() call below would not stop on | |
| * SIGWINCH. | |
| */ | |
| signal(SIGWINCH, winch_handler); | |
| sigfillset(&sigs); | |
| /* Block all signals possible. */ | |
| if (sigprocmask(SIG_SETMASK, &sigs, NULL) < 0) { | |
| printk(UM_KERN_ERR "winch_thread : sigprocmask failed, " | |
| "errno = %d\n", errno); | |
| exit(1); | |
| } | |
| /* In sigsuspend(), block anything else than SIGWINCH. */ | |
| sigdelset(&sigs, SIGWINCH); | |
| if (setsid() < 0) { | |
| printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n", | |
| errno); | |
| exit(1); | |
| } | |
| if (ioctl(pty_fd, TIOCSCTTY, 0) < 0) { | |
| printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on " | |
| "fd %d err = %d\n", pty_fd, errno); | |
| exit(1); | |
| } | |
| if (tcsetpgrp(pty_fd, os_getpid()) < 0) { | |
| printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on " | |
| "fd %d err = %d\n", pty_fd, errno); | |
| exit(1); | |
| } | |
| /* | |
| * These are synchronization calls between various UML threads on the | |
| * host - since they are not different kernel threads, we cannot use | |
| * kernel semaphores. We don't use SysV semaphores because they are | |
| * persistent. | |
| */ | |
| count = read(pipe_fd, &c, sizeof(c)); | |
| if (count != sizeof(c)) | |
| printk(UM_KERN_ERR "winch_thread : failed to read " | |
| "synchronization byte, err = %d\n", errno); | |
| while(1) { | |
| /* | |
| * This will be interrupted by SIGWINCH only, since | |
| * other signals are blocked. | |
| */ | |
| sigsuspend(&sigs); | |
| count = write(pipe_fd, &c, sizeof(c)); | |
| if (count != sizeof(c)) | |
| printk(UM_KERN_ERR "winch_thread : write failed, " | |
| "err = %d\n", errno); | |
| } | |
| } | |
| static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out, | |
| unsigned long *stack_out) | |
| { | |
| struct winch_data data; | |
| int fds[2], n, err; | |
| char c; | |
| err = os_pipe(fds, 1, 1); | |
| if (err < 0) { | |
| printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n", | |
| -err); | |
| goto out; | |
| } | |
| data = ((struct winch_data) { .pty_fd = fd, | |
| .pipe_fd = fds[1] } ); | |
| /* | |
| * CLONE_FILES so this thread doesn't hold open files which are open | |
| * now, but later closed in a different thread. This is a | |
| * problem with /dev/net/tun, which if held open by this | |
| * thread, prevents the TUN/TAP device from being reused. | |
| */ | |
| err = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out); | |
| if (err < 0) { | |
| printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n", | |
| -err); | |
| goto out_close; | |
| } | |
| *fd_out = fds[0]; | |
| n = read(fds[0], &c, sizeof(c)); | |
| if (n != sizeof(c)) { | |
| printk(UM_KERN_ERR "winch_tramp : failed to read " | |
| "synchronization byte\n"); | |
| printk(UM_KERN_ERR "read failed, err = %d\n", errno); | |
| printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd); | |
| err = -EINVAL; | |
| goto out_close; | |
| } | |
| if (os_set_fd_block(*fd_out, 0)) { | |
| printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd " | |
| "non-blocking.\n"); | |
| goto out_close; | |
| } | |
| return err; | |
| out_close: | |
| close(fds[1]); | |
| close(fds[0]); | |
| out: | |
| return err; | |
| } | |
| void register_winch(int fd, struct tty_struct *tty) | |
| { | |
| unsigned long stack; | |
| int pid, thread, count, thread_fd = -1; | |
| char c = 1; | |
| if (!isatty(fd)) | |
| return; | |
| pid = tcgetpgrp(fd); | |
| if (!is_skas_winch(pid, fd, tty) && (pid == -1)) { | |
| thread = winch_tramp(fd, tty, &thread_fd, &stack); | |
| if (thread < 0) | |
| return; | |
| register_winch_irq(thread_fd, fd, thread, tty, stack); | |
| count = write(thread_fd, &c, sizeof(c)); | |
| if (count != sizeof(c)) | |
| printk(UM_KERN_ERR "register_winch : failed to write " | |
| "synchronization byte, err = %d\n", errno); | |
| } | |
| } |