| # | |
| # SATA/PATA driver configuration | |
| # | |
| menuconfig ATA | |
| tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" | |
| depends on HAS_IOMEM | |
| depends on BLOCK | |
| depends on !(M32R || M68K) || BROKEN | |
| depends on !SUN4 || BROKEN | |
| select SCSI | |
| ---help--- | |
| If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
| any other ATA device under Linux, say Y and make sure that you know | |
| the name of your ATA host adapter (the card inside your computer | |
| that "speaks" the ATA protocol, also called ATA controller), | |
| because you will be asked for it. | |
| NOTE: ATA enables basic SCSI support; *however*, | |
| 'SCSI disk support', 'SCSI tape support', or | |
| 'SCSI CDROM support' may also be needed, | |
| depending on your hardware configuration. | |
| if ATA | |
| config ATA_NONSTANDARD | |
| bool | |
| default n | |
| config ATA_ACPI | |
| bool | |
| depends on ACPI && PCI | |
| select ACPI_DOCK | |
| default y | |
| help | |
| This option adds support for ATA-related ACPI objects. | |
| These ACPI objects add the ability to retrieve taskfiles | |
| from the ACPI BIOS and write them to the disk controller. | |
| These objects may be related to performance, security, | |
| power management, or other areas. | |
| You can disable this at kernel boot time by using the | |
| option libata.noacpi=1 | |
| config SATA_AHCI | |
| tristate "AHCI SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for AHCI Serial ATA. | |
| If unsure, say N. | |
| config SATA_SVW | |
| tristate "ServerWorks Frodo / Apple K2 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Broadcom/Serverworks/Apple K2 | |
| SATA support. | |
| If unsure, say N. | |
| config ATA_PIIX | |
| tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ICH5/6/7/8 Serial ATA | |
| and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series | |
| host controllers. | |
| If unsure, say N. | |
| config SATA_MV | |
| tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| help | |
| This option enables support for the Marvell Serial ATA family. | |
| Currently supports 88SX[56]0[48][01] chips. | |
| If unsure, say N. | |
| config SATA_NV | |
| tristate "NVIDIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for NVIDIA Serial ATA. | |
| If unsure, say N. | |
| config PDC_ADMA | |
| tristate "Pacific Digital ADMA support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital ADMA controllers | |
| If unsure, say N. | |
| config SATA_QSTOR | |
| tristate "Pacific Digital SATA QStor support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital Serial ATA QStor. | |
| If unsure, say N. | |
| config SATA_PROMISE | |
| tristate "Promise SATA TX2/TX4 support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise Serial ATA TX2/TX4. | |
| If unsure, say N. | |
| config SATA_SX4 | |
| tristate "Promise SATA SX4 support" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for Promise Serial ATA SX4. | |
| If unsure, say N. | |
| config SATA_SIL | |
| tristate "Silicon Image SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIL24 | |
| tristate "Silicon Image 3124/3132 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image 3124/3132 Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIS | |
| tristate "SiS 964/965/966/180 SATA support" | |
| depends on PCI | |
| select PATA_SIS | |
| help | |
| This option enables support for SiS Serial ATA on | |
| SiS 964/965/966/180 and Parallel ATA on SiS 180. | |
| The PATA support for SiS 180 requires additionally to | |
| enable the PATA_SIS driver in the config. | |
| If unsure, say N. | |
| config SATA_ULI | |
| tristate "ULi Electronics SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ULi Electronics SATA. | |
| If unsure, say N. | |
| config SATA_VIA | |
| tristate "VIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for VIA Serial ATA. | |
| If unsure, say N. | |
| config SATA_VITESSE | |
| tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
| If unsure, say N. | |
| config SATA_INIC162X | |
| tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for Initio 162x Serial ATA. | |
| config PATA_ACPI | |
| tristate "ACPI firmware driver for PATA" | |
| depends on ATA_ACPI | |
| help | |
| This option enables an ACPI method driver which drives | |
| motherboard PATA controller interfaces through the ACPI | |
| firmware in the BIOS. This driver can sometimes handle | |
| otherwise unsupported hardware. | |
| config SATA_FSL | |
| tristate "Freescale 3.0Gbps SATA support" | |
| depends on FSL_SOC | |
| help | |
| This option enables support for Freescale 3.0Gbps SATA controller. | |
| It can be found on MPC837x and MPC8315. | |
| If unsure, say N. | |
| config PATA_ALI | |
| tristate "ALi PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the ALi ATA interfaces | |
| found on the many ALi chipsets. | |
| If unsure, say N. | |
| config PATA_AMD | |
| tristate "AMD/NVidia PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the AMD and NVidia PATA | |
| interfaces found on the chipsets for Athlon/Athlon64. | |
| If unsure, say N. | |
| config PATA_ARTOP | |
| tristate "ARTOP 6210/6260 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ARTOP PATA controllers. | |
| If unsure, say N. | |
| config PATA_AT32 | |
| tristate "Atmel AVR32 PATA support (Experimental)" | |
| depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
| help | |
| This option enables support for the IDE devices on the | |
| Atmel AT32AP platform. | |
| If unsure, say N. | |
| config PATA_ATIIXP | |
| tristate "ATI PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the ATI ATA interfaces | |
| found on the many ATI chipsets. | |
| If unsure, say N. | |
| config PATA_CMD640_PCI | |
| tristate "CMD640 PCI PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the CMD640 PCI IDE | |
| interface chip. Only the primary channel is currently | |
| supported. | |
| If unsure, say N. | |
| config PATA_CMD64X | |
| tristate "CMD64x PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the CMD64x series chips | |
| except for the CMD640. | |
| If unsure, say N. | |
| config PATA_CS5520 | |
| tristate "CS5510/5520 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the Cyrix 5510/5520 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5530 | |
| tristate "CS5530 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5535 | |
| tristate "CS5535 PATA support (Experimental)" | |
| depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
| help | |
| This option enables support for the NatSemi/AMD CS5535 | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5536 | |
| tristate "CS5536 PATA support (Experimental)" | |
| depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
| help | |
| This option enables support for the AMD CS5536 | |
| companion chip used with the Geode LX processor family. | |
| If unsure, say N. | |
| config PATA_CYPRESS | |
| tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Cypress/Contaq CY82C693 | |
| chipset found in some Alpha systems | |
| If unsure, say N. | |
| config PATA_EFAR | |
| tristate "EFAR SLC90E66 support" | |
| depends on PCI | |
| help | |
| This option enables support for the EFAR SLC90E66 | |
| IDE controller found on some older machines. | |
| If unsure, say N. | |
| config ATA_GENERIC | |
| tristate "Generic ATA support" | |
| depends on PCI | |
| help | |
| This option enables support for generic BIOS configured | |
| ATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT366 | |
| tristate "HPT 366/368 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the HPT 366 and 368 | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT37X | |
| tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the majority of the later HPT | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT3X2N | |
| tristate "HPT 372N/302N PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the N variant HPT PATA | |
| controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT3X3 | |
| tristate "HPT 343/363 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the HPT 343/363 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT3X3_DMA | |
| bool "HPT 343/363 DMA support (Experimental)" | |
| depends on PATA_HPT3X3 | |
| help | |
| This option enables DMA support for the HPT343/363 | |
| controllers. Enable with care as there are still some | |
| problems with DMA on this chipset. | |
| config PATA_ISAPNP | |
| tristate "ISA Plug and Play PATA support (Experimental)" | |
| depends on EXPERIMENTAL && ISAPNP | |
| help | |
| This option enables support for ISA plug & play ATA | |
| controllers such as those found on old soundcards. | |
| If unsure, say N. | |
| config PATA_IT821X | |
| tristate "IT8211/2 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the ITE 8211 and 8212 | |
| PATA controllers via the new ATA layer, including RAID | |
| mode. | |
| If unsure, say N. | |
| config PATA_IT8213 | |
| tristate "IT8213 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the ITE 821 PATA | |
| controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_JMICRON | |
| tristate "JMicron PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the JMicron IDE controller, via the new | |
| ATA layer. | |
| If unsure, say N. | |
| config PATA_LEGACY | |
| tristate "Legacy ISA PATA support (Experimental)" | |
| depends on ISA && EXPERIMENTAL | |
| help | |
| This option enables support for ISA/VLB bus legacy PATA | |
| ports and allows them to be accessed via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_TRIFLEX | |
| tristate "Compaq Triflex PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the Compaq 'Triflex' IDE controller as found | |
| on many Compaq Pentium-Pro systems, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_MARVELL | |
| tristate "Marvell PATA support via legacy mode" | |
| depends on PCI | |
| help | |
| This option enables limited support for the Marvell 88SE6145 ATA | |
| controller. | |
| If unsure, say N. | |
| config PATA_MPC52xx | |
| tristate "Freescale MPC52xx SoC internal IDE" | |
| depends on PPC_MPC52xx | |
| help | |
| This option enables support for integrated IDE controller | |
| of the Freescale MPC52xx SoC. | |
| If unsure, say N. | |
| config PATA_MPIIX | |
| tristate "Intel PATA MPIIX support" | |
| depends on PCI | |
| help | |
| This option enables support for MPIIX PATA support. | |
| If unsure, say N. | |
| config PATA_OLDPIIX | |
| tristate "Intel PATA old PIIX support" | |
| depends on PCI | |
| help | |
| This option enables support for early PIIX PATA support. | |
| If unsure, say N. | |
| config PATA_NETCELL | |
| tristate "NETCELL Revolution RAID support" | |
| depends on PCI | |
| help | |
| This option enables support for the Netcell Revolution RAID | |
| PATA controller. | |
| If unsure, say N. | |
| config PATA_NINJA32 | |
| tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Ninja32, Delkin and | |
| possibly other brands of Cardbus ATA adapter | |
| If unsure, say N. | |
| config PATA_NS87410 | |
| tristate "Nat Semi NS87410 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the National Semiconductor | |
| NS87410 PCI-IDE controller. | |
| If unsure, say N. | |
| config PATA_NS87415 | |
| tristate "Nat Semi NS87415 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the National Semiconductor | |
| NS87415 PCI-IDE controller. | |
| If unsure, say N. | |
| config PATA_OPTI | |
| tristate "OPTI621/6215 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables full PIO support for the early Opti ATA | |
| controllers found on some old motherboards. | |
| If unsure, say N. | |
| config PATA_OPTIDMA | |
| tristate "OPTI FireStar PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables DMA/PIO support for the later OPTi | |
| controllers found on some old motherboards and in some | |
| laptops. | |
| If unsure, say N. | |
| config PATA_PCMCIA | |
| tristate "PCMCIA PATA support" | |
| depends on PCMCIA | |
| help | |
| This option enables support for PCMCIA ATA interfaces, including | |
| compact flash card adapters via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PDC_OLD | |
| tristate "Older Promise PATA controller support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Promise 20246, 20262, 20263, | |
| 20265 and 20267 adapters. | |
| If unsure, say N. | |
| config PATA_QDI | |
| tristate "QDI VLB PATA support" | |
| depends on ISA | |
| help | |
| Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
| config PATA_RADISYS | |
| tristate "RADISYS 82600 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the RADISYS 82600 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_RB500 | |
| tristate "RouterBoard 500 PATA CompactFlash support" | |
| depends on MIKROTIK_RB500 | |
| help | |
| This option enables support for the RouterBoard 500 | |
| PATA CompactFlash controller. | |
| If unsure, say N. | |
| config PATA_RZ1000 | |
| tristate "PC Tech RZ1000 PATA support" | |
| depends on PCI | |
| help | |
| This option enables basic support for the PC Tech RZ1000/1 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_SC1200 | |
| tristate "SC1200 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the NatSemi/AMD SC1200 SoC | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_SERVERWORKS | |
| tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
| HT1000 PATA controllers, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PDC2027X | |
| tristate "Promise PATA 2027x support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
| If unsure, say N. | |
| config PATA_SIL680 | |
| tristate "CMD / Silicon Image 680 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for CMD / Silicon Image 680 PATA. | |
| If unsure, say N. | |
| config PATA_SIS | |
| tristate "SiS PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for SiS PATA controllers | |
| If unsure, say N. | |
| config PATA_VIA | |
| tristate "VIA PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the VIA PATA interfaces | |
| found on the many VIA chipsets. | |
| If unsure, say N. | |
| config PATA_WINBOND | |
| tristate "Winbond SL82C105 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for SL82C105 PATA devices found in the | |
| Netwinder and some other systems | |
| If unsure, say N. | |
| config PATA_WINBOND_VLB | |
| tristate "Winbond W83759A VLB PATA support (Experimental)" | |
| depends on ISA && EXPERIMENTAL | |
| help | |
| Support for the Winbond W83759A controller on Vesa Local Bus | |
| systems. | |
| config PATA_PLATFORM | |
| tristate "Generic platform device PATA support" | |
| depends on EMBEDDED || ARCH_RPC || PPC | |
| help | |
| This option enables support for generic directly connected ATA | |
| devices commonly found on embedded systems. | |
| If unsure, say N. | |
| config PATA_OF_PLATFORM | |
| tristate "OpenFirmware platform device PATA support" | |
| depends on PATA_PLATFORM && PPC_OF | |
| help | |
| This option enables support for generic directly connected ATA | |
| devices commonly found on embedded systems with OpenFirmware | |
| bindings. | |
| If unsure, say N. | |
| config PATA_ICSIDE | |
| tristate "Acorn ICS PATA support" | |
| depends on ARM && ARCH_ACORN | |
| help | |
| On Acorn systems, say Y here if you wish to use the ICS PATA | |
| interface card. This is not required for ICS partition support. | |
| If you are unsure, say N to this. | |
| config PATA_IXP4XX_CF | |
| tristate "IXP4XX Compact Flash support" | |
| depends on ARCH_IXP4XX | |
| help | |
| This option enables support for a Compact Flash connected on | |
| the ixp4xx expansion bus. This driver had been written for | |
| Loft/Avila boards in mind but can work with others. | |
| If unsure, say N. | |
| config PATA_SCC | |
| tristate "Toshiba's Cell Reference Set IDE support" | |
| depends on PCI && PPC_CELLEB | |
| help | |
| This option enables support for the built-in IDE controller on | |
| Toshiba Cell Reference Board. | |
| If unsure, say N. | |
| config PATA_BF54X | |
| tristate "Blackfin 54x ATAPI support" | |
| depends on BF542 || BF548 || BF549 | |
| help | |
| This option enables support for the built-in ATAPI controller on | |
| Blackfin 54x family chips. | |
| If unsure, say N. | |
| endif # ATA |