| /* |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _SCIC_SDS_CONTROLLER_H_ |
| #define _SCIC_SDS_CONTROLLER_H_ |
| |
| #include <linux/string.h> |
| |
| /** |
| * This file contains the structures, constants and prototypes used for the |
| * core controller object. |
| * |
| * |
| */ |
| |
| #include "sci_pool.h" |
| #include "sci_controller_constants.h" |
| #include "sci_memory_descriptor_list.h" |
| #include "sci_base_controller.h" |
| #include "scic_config_parameters.h" |
| #include "scic_sds_port.h" |
| #include "scic_sds_phy.h" |
| #include "scic_sds_remote_node_table.h" |
| #include "scu_registers.h" |
| #include "scu_constants.h" |
| #include "scu_remote_node_context.h" |
| #include "scu_task_context.h" |
| #include "scu_unsolicited_frame.h" |
| #include "scic_sds_unsolicited_frame_control.h" |
| #include "scic_sds_port_configuration_agent.h" |
| #include "scic_sds_pci.h" |
| |
| struct scic_sds_remote_device; |
| struct scic_sds_request; |
| struct scic_sds_controller; |
| |
| |
| #define SCU_COMPLETION_RAM_ALIGNMENT (64) |
| |
| /** |
| * enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS - |
| * |
| * This enumeration depects the types of MDEs that are going to be created for |
| * the controller object. |
| */ |
| enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS { |
| /** |
| * Completion queue MDE entry |
| */ |
| SCU_MDE_COMPLETION_QUEUE, |
| |
| /** |
| * Remote node context MDE entry |
| */ |
| SCU_MDE_REMOTE_NODE_CONTEXT, |
| |
| /** |
| * Task context MDE entry |
| */ |
| SCU_MDE_TASK_CONTEXT, |
| |
| /** |
| * Unsolicited frame buffer MDE entrys this is the start of the unsolicited |
| * frame buffer entries. |
| */ |
| SCU_MDE_UF_BUFFER, |
| |
| SCU_MAX_MDES |
| }; |
| |
| |
| /** |
| * struct scic_power_control - |
| * |
| * This structure defines the fields for managing power control for direct |
| * attached disk devices. |
| */ |
| struct scic_power_control { |
| /** |
| * This field is set when the power control timer is running and cleared when |
| * it is not. |
| */ |
| bool timer_started; |
| |
| /** |
| * This field is the handle to the driver timer object. This timer is used to |
| * control when the directed attached disks can consume power. |
| */ |
| void *timer; |
| |
| /** |
| * This field is used to keep track of how many phys are put into the |
| * requesters field. |
| */ |
| u8 phys_waiting; |
| |
| /** |
| * This field is used to keep track of how many phys have been granted to consume power |
| */ |
| u8 phys_granted_power; |
| |
| /** |
| * This field is an array of phys that we are waiting on. The phys are direct |
| * mapped into requesters via struct scic_sds_phy.phy_index |
| */ |
| struct scic_sds_phy *requesters[SCI_MAX_PHYS]; |
| |
| }; |
| |
| /** |
| * struct scic_sds_controller - |
| * |
| * This structure represents the SCU contoller object. |
| */ |
| struct scic_sds_controller { |
| /** |
| * The struct sci_base_controller is the parent object for the struct scic_sds_controller |
| * object. |
| */ |
| struct sci_base_controller parent; |
| |
| /** |
| * This field is the driver timer object handler used to time the controller |
| * object start and stop requests. |
| */ |
| void *timeout_timer; |
| |
| /** |
| * This field contains the user parameters to be utilized for this |
| * core controller object. |
| */ |
| union scic_user_parameters user_parameters; |
| |
| /** |
| * This field contains the OEM parameters to be utilized for this |
| * core controller object. |
| */ |
| union scic_oem_parameters oem_parameters; |
| |
| /** |
| * This field contains the port configuration agent for this controller. |
| */ |
| struct scic_sds_port_configuration_agent port_agent; |
| |
| /** |
| * This field is the array of port objects that are controlled by this |
| * controller object. There is one dummy port object also contained within |
| * this controller object. |
| */ |
| struct scic_sds_port port_table[SCI_MAX_PORTS + 1]; |
| |
| /** |
| * This field is the array of phy objects that are controlled by this |
| * controller object. |
| */ |
| struct scic_sds_phy phy_table[SCI_MAX_PHYS]; |
| |
| /** |
| * This field is the array of device objects that are currently constructed |
| * for this controller object. This table is used as a fast lookup of device |
| * objects that need to handle device completion notifications from the |
| * hardware. The table is RNi based. |
| */ |
| struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; |
| |
| /** |
| * This field is the array of IO request objects that are currently active for |
| * this controller object. This table is used as a fast lookup of the io |
| * request object that need to handle completion queue notifications. The |
| * table is TCi based. |
| */ |
| struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; |
| |
| /** |
| * This field is the free RNi data structure |
| */ |
| struct scic_remote_node_table available_remote_nodes; |
| |
| /** |
| * This field is the TCi pool used to manage the task context index. |
| */ |
| SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); |
| |
| /** |
| * This filed is the struct scic_power_control data used to controll when direct |
| * attached devices can consume power. |
| */ |
| struct scic_power_control power_control; |
| |
| /** |
| * This field is the array of sequence values for the IO Tag fields. Even |
| * though only 4 bits of the field is used for the sequence the sequence is 16 |
| * bits in size so the sequence can be bitwise or'd with the TCi to build the |
| * IO Tag value. |
| */ |
| u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; |
| |
| /** |
| * This field in the array of sequence values for the RNi. These are used |
| * to control io request build to io request start operations. The sequence |
| * value is recorded into an io request when it is built and is checked on |
| * the io request start operation to make sure that there was not a device |
| * hot plug between the build and start operation. |
| */ |
| u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; |
| |
| /** |
| * This field is a pointer to the memory allocated by the driver for the task |
| * context table. This data is shared between the hardware and software. |
| */ |
| struct scu_task_context *task_context_table; |
| |
| /** |
| * This field is a pointer to the memory allocated by the driver for the |
| * remote node context table. This table is shared between the hardware and |
| * software. |
| */ |
| union scu_remote_node_context *remote_node_context_table; |
| |
| /** |
| * This field is the array of physical memory requiremets for this controller |
| * object. |
| */ |
| struct sci_physical_memory_descriptor memory_descriptors[SCU_MAX_MDES]; |
| |
| /** |
| * This field is a pointer to the completion queue. This memory is |
| * written to by the hardware and read by the software. |
| */ |
| u32 *completion_queue; |
| |
| /** |
| * This field is the software copy of the completion queue get pointer. The |
| * controller object writes this value to the hardware after processing the |
| * completion entries. |
| */ |
| u32 completion_queue_get; |
| |
| /** |
| * This field is the minimum of the number of hardware supported port entries |
| * and the software requested port entries. |
| */ |
| u32 logical_port_entries; |
| |
| /** |
| * This field is the minimum number of hardware supported completion queue |
| * entries and the software requested completion queue entries. |
| */ |
| u32 completion_queue_entries; |
| |
| /** |
| * This field is the minimum number of hardware supported event entries and |
| * the software requested event entries. |
| */ |
| u32 completion_event_entries; |
| |
| /** |
| * This field is the minimum number of devices supported by the hardware and |
| * the number of devices requested by the software. |
| */ |
| u32 remote_node_entries; |
| |
| /** |
| * This field is the minimum number of IO requests supported by the hardware |
| * and the number of IO requests requested by the software. |
| */ |
| u32 task_context_entries; |
| |
| /** |
| * This object contains all of the unsolicited frame specific |
| * data utilized by the core controller. |
| */ |
| struct scic_sds_unsolicited_frame_control uf_control; |
| |
| /* Phy Startup Data */ |
| /** |
| * This field is the driver timer handle for controller phy request startup. |
| * On controller start the controller will start each PHY individually in |
| * order of phy index. |
| */ |
| void *phy_startup_timer; |
| |
| /** |
| * This field is set when the phy_startup_timer is running and is cleared when |
| * the phy_startup_timer is stopped. |
| */ |
| bool phy_startup_timer_pending; |
| |
| /** |
| * This field is the index of the next phy start. It is initialized to 0 and |
| * increments for each phy index that is started. |
| */ |
| u32 next_phy_to_start; |
| |
| /** |
| * This field controlls the invalid link up notifications to the SCI_USER. If |
| * an invalid_link_up notification is reported a bit for the PHY index is set |
| * so further notifications are not made. Once the PHY object reports link up |
| * and is made part of a port then this bit for the PHY index is cleared. |
| */ |
| u8 invalid_phy_mask; |
| |
| /* |
| * This field saves the current interrupt coalescing number of the controller. |
| */ |
| u16 interrupt_coalesce_number; |
| |
| /* |
| * This field saves the current interrupt coalescing timeout value in microseconds. |
| */ |
| u32 interrupt_coalesce_timeout; |
| |
| /** |
| * This field is a pointer to the memory mapped register space for the |
| * struct smu_registers. |
| */ |
| struct smu_registers __iomem *smu_registers; |
| |
| /** |
| * This field is a pointer to the memory mapped register space for the |
| * struct scu_registers. |
| */ |
| struct scu_registers __iomem *scu_registers; |
| |
| }; |
| |
| typedef void (*scic_sds_controller_phy_handler_t)(struct scic_sds_controller *, |
| struct scic_sds_port *, |
| struct scic_sds_phy *); |
| |
| typedef void (*scic_sds_controller_device_handler_t)(struct scic_sds_controller *, |
| struct scic_sds_remote_device *); |
| |
| |
| /** |
| * struct scic_sds_controller_state_handler - |
| * |
| * This structure contains the SDS core specific definition for the state |
| * handlers. |
| */ |
| struct scic_sds_controller_state_handler { |
| struct sci_base_controller_state_handler base; |
| |
| sci_base_controller_request_handler_t terminate_request; |
| scic_sds_controller_phy_handler_t link_up; |
| scic_sds_controller_phy_handler_t link_down; |
| scic_sds_controller_device_handler_t remote_device_started_handler; |
| scic_sds_controller_device_handler_t remote_device_stopped_handler; |
| }; |
| |
| extern const struct scic_sds_controller_state_handler |
| scic_sds_controller_state_handler_table[]; |
| extern const struct sci_base_state scic_sds_controller_state_table[]; |
| |
| /** |
| * INCREMENT_QUEUE_GET() - |
| * |
| * This macro will increment the specified index to and if the index wraps to 0 |
| * it will toggel the cycle bit. |
| */ |
| #define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ |
| { \ |
| if ((index) + 1 == entry_count) { \ |
| (index) = 0; \ |
| (cycle) = (cycle) ^ (bit_toggle); \ |
| } else { \ |
| index = index + 1; \ |
| } \ |
| } |
| |
| /** |
| * scic_sds_controller_get_base_state_machine() - |
| * |
| * This is a helper macro that gets the base state machine for the controller |
| * object |
| */ |
| #define scic_sds_controller_get_base_state_machine(this_controller) \ |
| (&(this_controller)->parent.state_machine) |
| |
| /** |
| * scic_sds_controller_get_port_configuration_agent() - |
| * |
| * This is a helper macro to get the port configuration agent from the |
| * controller object. |
| */ |
| #define scic_sds_controller_get_port_configuration_agent(controller) \ |
| (&(controller)->port_agent) |
| |
| /** |
| * smu_register_write() - |
| * |
| * This macro writes to the smu_register for this controller |
| */ |
| #define smu_register_write(controller, reg, value) \ |
| scic_sds_pci_write_smu_dword((controller), &(reg), (value)) |
| |
| /** |
| * smu_register_read() - |
| * |
| * This macro reads the smu_register for this controller |
| */ |
| #define smu_register_read(controller, reg) \ |
| scic_sds_pci_read_smu_dword((controller), &(reg)) |
| |
| /** |
| * scu_register_write() - |
| * |
| * This mcaro writes the scu_register for this controller |
| */ |
| #define scu_register_write(controller, reg, value) \ |
| scic_sds_pci_write_scu_dword((controller), &(reg), (value)) |
| |
| /** |
| * scu_register_read() - |
| * |
| * This macro reads the scu_register for this controller |
| */ |
| #define scu_register_read(controller, reg) \ |
| scic_sds_pci_read_scu_dword((controller), &(reg)) |
| |
| /** |
| * scic_sds_controller_get_protocol_engine_group() - |
| * |
| * This macro returns the protocol engine group for this controller object. |
| * Presently we only support protocol engine group 0 so just return that |
| */ |
| #define scic_sds_controller_get_protocol_engine_group(controller) 0 |
| |
| /** |
| * scic_sds_io_tag_construct() - |
| * |
| * This macro constructs an IO tag from the sequence and index values. |
| */ |
| #define scic_sds_io_tag_construct(sequence, task_index) \ |
| ((sequence) << 12 | (task_index)) |
| |
| /** |
| * scic_sds_io_tag_get_sequence() - |
| * |
| * This macro returns the IO sequence from the IO tag value. |
| */ |
| #define scic_sds_io_tag_get_sequence(io_tag) \ |
| (((io_tag) & 0xF000) >> 12) |
| |
| /** |
| * scic_sds_io_tag_get_index() - |
| * |
| * This macro returns the TCi from the io tag value |
| */ |
| #define scic_sds_io_tag_get_index(io_tag) \ |
| ((io_tag) & 0x0FFF) |
| |
| /** |
| * scic_sds_io_sequence_increment() - |
| * |
| * This is a helper macro to increment the io sequence count. We may find in |
| * the future that it will be faster to store the sequence count in such a way |
| * as we dont perform the shift operation to build io tag values so therefore |
| * need a way to incrment them correctly |
| */ |
| #define scic_sds_io_sequence_increment(value) \ |
| ((value) = (((value) + 1) & 0x000F)) |
| |
| #define scic_sds_remote_device_node_count(device) \ |
| (\ |
| (\ |
| (device)->target_protocols.u.bits.attached_stp_target \ |
| && ((device)->is_direct_attached != true) \ |
| ) \ |
| ? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT \ |
| ) |
| |
| /** |
| * scic_sds_controller_set_invalid_phy() - |
| * |
| * This macro will set the bit in the invalid phy mask for this controller |
| * object. This is used to control messages reported for invalid link up |
| * notifications. |
| */ |
| #define scic_sds_controller_set_invalid_phy(controller, phy) \ |
| ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) |
| |
| /** |
| * scic_sds_controller_clear_invalid_phy() - |
| * |
| * This macro will clear the bit in the invalid phy mask for this controller |
| * object. This is used to control messages reported for invalid link up |
| * notifications. |
| */ |
| #define scic_sds_controller_clear_invalid_phy(controller, phy) \ |
| ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| u32 scic_sds_controller_get_object_size(void); |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| void scic_sds_controller_post_request( |
| struct scic_sds_controller *this_controller, |
| u32 request); |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| void scic_sds_controller_release_frame( |
| struct scic_sds_controller *this_controller, |
| u32 frame_index); |
| |
| void scic_sds_controller_copy_sata_response( |
| void *response_buffer, |
| void *frame_header, |
| void *frame_buffer); |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| enum sci_status scic_sds_controller_allocate_remote_node_context( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_remote_device *the_device, |
| u16 *node_id); |
| |
| void scic_sds_controller_free_remote_node_context( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_remote_device *the_device, |
| u16 node_id); |
| |
| union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( |
| struct scic_sds_controller *this_controller, |
| u16 node_id); |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( |
| struct scic_sds_controller *this_controller, |
| u16 io_tag); |
| |
| |
| struct scu_task_context *scic_sds_controller_get_task_context_buffer( |
| struct scic_sds_controller *this_controller, |
| u16 io_tag); |
| |
| /* |
| * ***************************************************************************** |
| * * CORE CONTROLLER POWER CONTROL METHODS |
| * ***************************************************************************** */ |
| |
| |
| void scic_sds_controller_power_control_queue_insert( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_phy *the_phy); |
| |
| void scic_sds_controller_power_control_queue_remove( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_phy *the_phy); |
| |
| /* |
| * ***************************************************************************** |
| * * CORE CONTROLLER PHY MESSAGE PROCESSING |
| * ***************************************************************************** */ |
| |
| void scic_sds_controller_link_up( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_port *the_port, |
| struct scic_sds_phy *the_phy); |
| |
| void scic_sds_controller_link_down( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_port *the_port, |
| struct scic_sds_phy *the_phy); |
| |
| /* |
| * ***************************************************************************** |
| * * CORE CONTROLLER REMOTE DEVICE MESSAGE PROCESSING |
| * ***************************************************************************** */ |
| |
| bool scic_sds_controller_has_remote_devices_stopping( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_remote_device_started( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_remote_device *the_device); |
| |
| void scic_sds_controller_remote_device_stopped( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_remote_device *the_device); |
| |
| |
| /* |
| * ***************************************************************************** |
| * * CORE CONTROLLER PRIVATE METHODS |
| * ***************************************************************************** */ |
| |
| enum sci_status scic_sds_controller_validate_memory_descriptor_table( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_ram_initialization( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_assign_task_entries( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_afe_initialization( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_enable_port_task_scheduler( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_initialize_completion_queue( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_initialize_unsolicited_frame_queue( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_phy_timer_stop( |
| struct scic_sds_controller *this_controller); |
| |
| enum sci_status scic_sds_controller_start_next_phy( |
| struct scic_sds_controller *this_controller); |
| |
| enum sci_status scic_sds_controller_stop_phys( |
| struct scic_sds_controller *this_controller); |
| |
| enum sci_status scic_sds_controller_stop_ports( |
| struct scic_sds_controller *this_controller); |
| |
| enum sci_status scic_sds_controller_stop_devices( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_copy_task_context( |
| struct scic_sds_controller *this_controller, |
| struct scic_sds_request *this_request); |
| |
| void scic_sds_controller_timeout_handler(void *controller); |
| |
| void scic_sds_controller_initialize_power_control( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_register_setup( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_reset_hardware( |
| struct scic_sds_controller *this_controller); |
| |
| enum sci_status scic_sds_controller_initialize_phy_startup( |
| struct scic_sds_controller *this_controller); |
| |
| void scic_sds_controller_build_memory_descriptor_table( |
| struct scic_sds_controller *this_controller); |
| |
| #endif /* _SCIC_SDS_CONTROLLER_H_ */ |