| /* | 
 |  * common-board-devices.c | 
 |  * | 
 |  * Copyright (C) 2011 CompuLab, Ltd. | 
 |  * Author: Mike Rapoport <mike@compulab.co.il> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/gpio.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/spi/ads7846.h> | 
 |  | 
 | #include <plat/mcspi.h> | 
 | #include <plat/nand.h> | 
 |  | 
 | #include "common-board-devices.h" | 
 |  | 
 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ | 
 | 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | 
 | static struct omap2_mcspi_device_config ads7846_mcspi_config = { | 
 | 	.turbo_mode	= 0, | 
 | }; | 
 |  | 
 | /* | 
 |  * ADS7846 driver maybe request a gpio according to the value | 
 |  * of pdata->get_pendown_state, but we have done this. So set | 
 |  * get_pendown_state to avoid twice gpio requesting. | 
 |  */ | 
 | static int omap3_get_pendown_state(void) | 
 | { | 
 | 	return !gpio_get_value(OMAP3_EVM_TS_GPIO); | 
 | } | 
 |  | 
 | static struct ads7846_platform_data ads7846_config = { | 
 | 	.x_max			= 0x0fff, | 
 | 	.y_max			= 0x0fff, | 
 | 	.x_plate_ohms		= 180, | 
 | 	.pressure_max		= 255, | 
 | 	.debounce_max		= 10, | 
 | 	.debounce_tol		= 3, | 
 | 	.debounce_rep		= 1, | 
 | 	.gpio_pendown		= -EINVAL, | 
 | 	.keep_vref_on		= 1, | 
 | 	.get_pendown_state	= &omap3_get_pendown_state, | 
 | }; | 
 |  | 
 | static struct spi_board_info ads7846_spi_board_info __initdata = { | 
 | 	.modalias		= "ads7846", | 
 | 	.bus_num		= -EINVAL, | 
 | 	.chip_select		= 0, | 
 | 	.max_speed_hz		= 1500000, | 
 | 	.controller_data	= &ads7846_mcspi_config, | 
 | 	.irq			= -EINVAL, | 
 | 	.platform_data		= &ads7846_config, | 
 | }; | 
 |  | 
 | void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, | 
 | 			      struct ads7846_platform_data *board_pdata) | 
 | { | 
 | 	struct spi_board_info *spi_bi = &ads7846_spi_board_info; | 
 | 	int err; | 
 |  | 
 | 	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); | 
 | 	if (err) { | 
 | 		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (gpio_debounce) | 
 | 		gpio_set_debounce(gpio_pendown, gpio_debounce); | 
 |  | 
 | 	spi_bi->bus_num	= bus_num; | 
 | 	spi_bi->irq	= gpio_to_irq(gpio_pendown); | 
 |  | 
 | 	if (board_pdata) { | 
 | 		board_pdata->gpio_pendown = gpio_pendown; | 
 | 		spi_bi->platform_data = board_pdata; | 
 | 		if (board_pdata->get_pendown_state) | 
 | 			gpio_export(gpio_pendown, 0); | 
 | 	} else { | 
 | 		ads7846_config.gpio_pendown = gpio_pendown; | 
 | 	} | 
 |  | 
 | 	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) | 
 | 		gpio_free(gpio_pendown); | 
 |  | 
 | 	spi_register_board_info(&ads7846_spi_board_info, 1); | 
 | } | 
 | #else | 
 | void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, | 
 | 			      struct ads7846_platform_data *board_pdata) | 
 | { | 
 | } | 
 | #endif | 
 |  | 
 | #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) | 
 | static struct omap_nand_platform_data nand_data; | 
 |  | 
 | void __init omap_nand_flash_init(int options, struct mtd_partition *parts, | 
 | 				 int nr_parts) | 
 | { | 
 | 	u8 cs = 0; | 
 | 	u8 nandcs = GPMC_CS_NUM + 1; | 
 |  | 
 | 	/* find out the chip-select on which NAND exists */ | 
 | 	while (cs < GPMC_CS_NUM) { | 
 | 		u32 ret = 0; | 
 | 		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); | 
 |  | 
 | 		if ((ret & 0xC00) == 0x800) { | 
 | 			printk(KERN_INFO "Found NAND on CS%d\n", cs); | 
 | 			if (nandcs > GPMC_CS_NUM) | 
 | 				nandcs = cs; | 
 | 		} | 
 | 		cs++; | 
 | 	} | 
 |  | 
 | 	if (nandcs > GPMC_CS_NUM) { | 
 | 		printk(KERN_INFO "NAND: Unable to find configuration " | 
 | 				 "in GPMC\n "); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (nandcs < GPMC_CS_NUM) { | 
 | 		nand_data.cs = nandcs; | 
 | 		nand_data.parts = parts; | 
 | 		nand_data.nr_parts = nr_parts; | 
 | 		nand_data.devsize = options; | 
 |  | 
 | 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); | 
 | 		if (gpmc_nand_init(&nand_data) < 0) | 
 | 			printk(KERN_ERR "Unable to register NAND device\n"); | 
 | 	} | 
 | } | 
 | #else | 
 | void __init omap_nand_flash_init(int options, struct mtd_partition *parts, | 
 | 				 int nr_parts) | 
 | { | 
 | } | 
 | #endif |