| /* |
| BlueZ - Bluetooth protocol stack for Linux |
| Copyright (C) 2000-2001 Qualcomm Incorporated |
| Copyright (C) 2011 ProFUSION Embedded Systems |
| |
| Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License version 2 as |
| published by the Free Software Foundation; |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. |
| IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY |
| CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES |
| WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| |
| ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, |
| COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS |
| SOFTWARE IS DISCLAIMED. |
| */ |
| |
| /* Bluetooth HCI core. */ |
| |
| #include <linux/export.h> |
| #include <linux/idr.h> |
| #include <linux/rfkill.h> |
| #include <linux/debugfs.h> |
| #include <linux/crypto.h> |
| #include <asm/unaligned.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| #include <net/bluetooth/l2cap.h> |
| #include <net/bluetooth/mgmt.h> |
| |
| #include "hci_request.h" |
| #include "hci_debugfs.h" |
| #include "smp.h" |
| #include "leds.h" |
| |
| static void hci_rx_work(struct work_struct *work); |
| static void hci_cmd_work(struct work_struct *work); |
| static void hci_tx_work(struct work_struct *work); |
| |
| /* HCI device list */ |
| LIST_HEAD(hci_dev_list); |
| DEFINE_RWLOCK(hci_dev_list_lock); |
| |
| /* HCI callback list */ |
| LIST_HEAD(hci_cb_list); |
| DEFINE_MUTEX(hci_cb_list_lock); |
| |
| /* HCI ID Numbering */ |
| static DEFINE_IDA(hci_index_ida); |
| |
| /* ---- HCI debugfs entries ---- */ |
| |
| static ssize_t dut_mode_read(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct hci_dev *hdev = file->private_data; |
| char buf[3]; |
| |
| buf[0] = hci_dev_test_flag(hdev, HCI_DUT_MODE) ? 'Y' : 'N'; |
| buf[1] = '\n'; |
| buf[2] = '\0'; |
| return simple_read_from_buffer(user_buf, count, ppos, buf, 2); |
| } |
| |
| static ssize_t dut_mode_write(struct file *file, const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct hci_dev *hdev = file->private_data; |
| struct sk_buff *skb; |
| bool enable; |
| int err; |
| |
| if (!test_bit(HCI_UP, &hdev->flags)) |
| return -ENETDOWN; |
| |
| err = kstrtobool_from_user(user_buf, count, &enable); |
| if (err) |
| return err; |
| |
| if (enable == hci_dev_test_flag(hdev, HCI_DUT_MODE)) |
| return -EALREADY; |
| |
| hci_req_sync_lock(hdev); |
| if (enable) |
| skb = __hci_cmd_sync(hdev, HCI_OP_ENABLE_DUT_MODE, 0, NULL, |
| HCI_CMD_TIMEOUT); |
| else |
| skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, |
| HCI_CMD_TIMEOUT); |
| hci_req_sync_unlock(hdev); |
| |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| |
| hci_dev_change_flag(hdev, HCI_DUT_MODE); |
| |
| return count; |
| } |
| |
| static const struct file_operations dut_mode_fops = { |
| .open = simple_open, |
| .read = dut_mode_read, |
| .write = dut_mode_write, |
| .llseek = default_llseek, |
| }; |
| |
| static ssize_t vendor_diag_read(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct hci_dev *hdev = file->private_data; |
| char buf[3]; |
| |
| buf[0] = hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) ? 'Y' : 'N'; |
| buf[1] = '\n'; |
| buf[2] = '\0'; |
| return simple_read_from_buffer(user_buf, count, ppos, buf, 2); |
| } |
| |
| static ssize_t vendor_diag_write(struct file *file, const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct hci_dev *hdev = file->private_data; |
| bool enable; |
| int err; |
| |
| err = kstrtobool_from_user(user_buf, count, &enable); |
| if (err) |
| return err; |
| |
| /* When the diagnostic flags are not persistent and the transport |
| * is not active or in user channel operation, then there is no need |
| * for the vendor callback. Instead just store the desired value and |
| * the setting will be programmed when the controller gets powered on. |
| */ |
| if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && |
| (!test_bit(HCI_RUNNING, &hdev->flags) || |
| hci_dev_test_flag(hdev, HCI_USER_CHANNEL))) |
| goto done; |
| |
| hci_req_sync_lock(hdev); |
| err = hdev->set_diag(hdev, enable); |
| hci_req_sync_unlock(hdev); |
| |
| if (err < 0) |
| return err; |
| |
| done: |
| if (enable) |
| hci_dev_set_flag(hdev, HCI_VENDOR_DIAG); |
| else |
| hci_dev_clear_flag(hdev, HCI_VENDOR_DIAG); |
| |
| return count; |
| } |
| |
| static const struct file_operations vendor_diag_fops = { |
| .open = simple_open, |
| .read = vendor_diag_read, |
| .write = vendor_diag_write, |
| .llseek = default_llseek, |
| }; |
| |
| static void hci_debugfs_create_basic(struct hci_dev *hdev) |
| { |
| debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev, |
| &dut_mode_fops); |
| |
| if (hdev->set_diag) |
| debugfs_create_file("vendor_diag", 0644, hdev->debugfs, hdev, |
| &vendor_diag_fops); |
| } |
| |
| static int hci_reset_req(struct hci_request *req, unsigned long opt) |
| { |
| BT_DBG("%s %ld", req->hdev->name, opt); |
| |
| /* Reset device */ |
| set_bit(HCI_RESET, &req->hdev->flags); |
| hci_req_add(req, HCI_OP_RESET, 0, NULL); |
| return 0; |
| } |
| |
| static void bredr_init(struct hci_request *req) |
| { |
| req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; |
| |
| /* Read Local Supported Features */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); |
| |
| /* Read Local Version */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); |
| |
| /* Read BD Address */ |
| hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); |
| } |
| |
| static void amp_init1(struct hci_request *req) |
| { |
| req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_BLOCK_BASED; |
| |
| /* Read Local Version */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); |
| |
| /* Read Local Supported Commands */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); |
| |
| /* Read Local AMP Info */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL); |
| |
| /* Read Data Blk size */ |
| hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL); |
| |
| /* Read Flow Control Mode */ |
| hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL); |
| |
| /* Read Location Data */ |
| hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL); |
| } |
| |
| static int amp_init2(struct hci_request *req) |
| { |
| /* Read Local Supported Features. Not all AMP controllers |
| * support this so it's placed conditionally in the second |
| * stage init. |
| */ |
| if (req->hdev->commands[14] & 0x20) |
| hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); |
| |
| return 0; |
| } |
| |
| static int hci_init1_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| BT_DBG("%s %ld", hdev->name, opt); |
| |
| /* Reset */ |
| if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) |
| hci_reset_req(req, 0); |
| |
| switch (hdev->dev_type) { |
| case HCI_PRIMARY: |
| bredr_init(req); |
| break; |
| case HCI_AMP: |
| amp_init1(req); |
| break; |
| default: |
| bt_dev_err(hdev, "Unknown device type %d", hdev->dev_type); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void bredr_setup(struct hci_request *req) |
| { |
| __le16 param; |
| __u8 flt_type; |
| |
| /* Read Buffer Size (ACL mtu, max pkt, etc.) */ |
| hci_req_add(req, HCI_OP_READ_BUFFER_SIZE, 0, NULL); |
| |
| /* Read Class of Device */ |
| hci_req_add(req, HCI_OP_READ_CLASS_OF_DEV, 0, NULL); |
| |
| /* Read Local Name */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_NAME, 0, NULL); |
| |
| /* Read Voice Setting */ |
| hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL); |
| |
| /* Read Number of Supported IAC */ |
| hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL); |
| |
| /* Read Current IAC LAP */ |
| hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); |
| |
| /* Clear Event Filters */ |
| flt_type = HCI_FLT_CLEAR_ALL; |
| hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); |
| |
| /* Connection accept timeout ~20 secs */ |
| param = cpu_to_le16(0x7d00); |
| hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m); |
| } |
| |
| static void le_setup(struct hci_request *req) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| /* Read LE Buffer Size */ |
| hci_req_add(req, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL); |
| |
| /* Read LE Local Supported Features */ |
| hci_req_add(req, HCI_OP_LE_READ_LOCAL_FEATURES, 0, NULL); |
| |
| /* Read LE Supported States */ |
| hci_req_add(req, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL); |
| |
| /* LE-only controllers have LE implicitly enabled */ |
| if (!lmp_bredr_capable(hdev)) |
| hci_dev_set_flag(hdev, HCI_LE_ENABLED); |
| } |
| |
| static void hci_setup_event_mask(struct hci_request *req) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| /* The second byte is 0xff instead of 0x9f (two reserved bits |
| * disabled) since a Broadcom 1.2 dongle doesn't respond to the |
| * command otherwise. |
| */ |
| u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; |
| |
| /* CSR 1.1 dongles does not accept any bitfield so don't try to set |
| * any event mask for pre 1.2 devices. |
| */ |
| if (hdev->hci_ver < BLUETOOTH_VER_1_2) |
| return; |
| |
| if (lmp_bredr_capable(hdev)) { |
| events[4] |= 0x01; /* Flow Specification Complete */ |
| } else { |
| /* Use a different default for LE-only devices */ |
| memset(events, 0, sizeof(events)); |
| events[1] |= 0x20; /* Command Complete */ |
| events[1] |= 0x40; /* Command Status */ |
| events[1] |= 0x80; /* Hardware Error */ |
| |
| /* If the controller supports the Disconnect command, enable |
| * the corresponding event. In addition enable packet flow |
| * control related events. |
| */ |
| if (hdev->commands[0] & 0x20) { |
| events[0] |= 0x10; /* Disconnection Complete */ |
| events[2] |= 0x04; /* Number of Completed Packets */ |
| events[3] |= 0x02; /* Data Buffer Overflow */ |
| } |
| |
| /* If the controller supports the Read Remote Version |
| * Information command, enable the corresponding event. |
| */ |
| if (hdev->commands[2] & 0x80) |
| events[1] |= 0x08; /* Read Remote Version Information |
| * Complete |
| */ |
| |
| if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { |
| events[0] |= 0x80; /* Encryption Change */ |
| events[5] |= 0x80; /* Encryption Key Refresh Complete */ |
| } |
| } |
| |
| if (lmp_inq_rssi_capable(hdev) || |
| test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) |
| events[4] |= 0x02; /* Inquiry Result with RSSI */ |
| |
| if (lmp_ext_feat_capable(hdev)) |
| events[4] |= 0x04; /* Read Remote Extended Features Complete */ |
| |
| if (lmp_esco_capable(hdev)) { |
| events[5] |= 0x08; /* Synchronous Connection Complete */ |
| events[5] |= 0x10; /* Synchronous Connection Changed */ |
| } |
| |
| if (lmp_sniffsubr_capable(hdev)) |
| events[5] |= 0x20; /* Sniff Subrating */ |
| |
| if (lmp_pause_enc_capable(hdev)) |
| events[5] |= 0x80; /* Encryption Key Refresh Complete */ |
| |
| if (lmp_ext_inq_capable(hdev)) |
| events[5] |= 0x40; /* Extended Inquiry Result */ |
| |
| if (lmp_no_flush_capable(hdev)) |
| events[7] |= 0x01; /* Enhanced Flush Complete */ |
| |
| if (lmp_lsto_capable(hdev)) |
| events[6] |= 0x80; /* Link Supervision Timeout Changed */ |
| |
| if (lmp_ssp_capable(hdev)) { |
| events[6] |= 0x01; /* IO Capability Request */ |
| events[6] |= 0x02; /* IO Capability Response */ |
| events[6] |= 0x04; /* User Confirmation Request */ |
| events[6] |= 0x08; /* User Passkey Request */ |
| events[6] |= 0x10; /* Remote OOB Data Request */ |
| events[6] |= 0x20; /* Simple Pairing Complete */ |
| events[7] |= 0x04; /* User Passkey Notification */ |
| events[7] |= 0x08; /* Keypress Notification */ |
| events[7] |= 0x10; /* Remote Host Supported |
| * Features Notification |
| */ |
| } |
| |
| if (lmp_le_capable(hdev)) |
| events[7] |= 0x20; /* LE Meta-Event */ |
| |
| hci_req_add(req, HCI_OP_SET_EVENT_MASK, sizeof(events), events); |
| } |
| |
| static int hci_init2_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| if (hdev->dev_type == HCI_AMP) |
| return amp_init2(req); |
| |
| if (lmp_bredr_capable(hdev)) |
| bredr_setup(req); |
| else |
| hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); |
| |
| if (lmp_le_capable(hdev)) |
| le_setup(req); |
| |
| /* All Bluetooth 1.2 and later controllers should support the |
| * HCI command for reading the local supported commands. |
| * |
| * Unfortunately some controllers indicate Bluetooth 1.2 support, |
| * but do not have support for this command. If that is the case, |
| * the driver can quirk the behavior and skip reading the local |
| * supported commands. |
| */ |
| if (hdev->hci_ver > BLUETOOTH_VER_1_1 && |
| !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) |
| hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); |
| |
| if (lmp_ssp_capable(hdev)) { |
| /* When SSP is available, then the host features page |
| * should also be available as well. However some |
| * controllers list the max_page as 0 as long as SSP |
| * has not been enabled. To achieve proper debugging |
| * output, force the minimum max_page to 1 at least. |
| */ |
| hdev->max_page = 0x01; |
| |
| if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) { |
| u8 mode = 0x01; |
| |
| hci_req_add(req, HCI_OP_WRITE_SSP_MODE, |
| sizeof(mode), &mode); |
| } else { |
| struct hci_cp_write_eir cp; |
| |
| memset(hdev->eir, 0, sizeof(hdev->eir)); |
| memset(&cp, 0, sizeof(cp)); |
| |
| hci_req_add(req, HCI_OP_WRITE_EIR, sizeof(cp), &cp); |
| } |
| } |
| |
| if (lmp_inq_rssi_capable(hdev) || |
| test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) { |
| u8 mode; |
| |
| /* If Extended Inquiry Result events are supported, then |
| * they are clearly preferred over Inquiry Result with RSSI |
| * events. |
| */ |
| mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; |
| |
| hci_req_add(req, HCI_OP_WRITE_INQUIRY_MODE, 1, &mode); |
| } |
| |
| if (lmp_inq_tx_pwr_capable(hdev)) |
| hci_req_add(req, HCI_OP_READ_INQ_RSP_TX_POWER, 0, NULL); |
| |
| if (lmp_ext_feat_capable(hdev)) { |
| struct hci_cp_read_local_ext_features cp; |
| |
| cp.page = 0x01; |
| hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, |
| sizeof(cp), &cp); |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) { |
| u8 enable = 1; |
| hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable), |
| &enable); |
| } |
| |
| return 0; |
| } |
| |
| static void hci_setup_link_policy(struct hci_request *req) |
| { |
| struct hci_dev *hdev = req->hdev; |
| struct hci_cp_write_def_link_policy cp; |
| u16 link_policy = 0; |
| |
| if (lmp_rswitch_capable(hdev)) |
| link_policy |= HCI_LP_RSWITCH; |
| if (lmp_hold_capable(hdev)) |
| link_policy |= HCI_LP_HOLD; |
| if (lmp_sniff_capable(hdev)) |
| link_policy |= HCI_LP_SNIFF; |
| if (lmp_park_capable(hdev)) |
| link_policy |= HCI_LP_PARK; |
| |
| cp.policy = cpu_to_le16(link_policy); |
| hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, sizeof(cp), &cp); |
| } |
| |
| static void hci_set_le_support(struct hci_request *req) |
| { |
| struct hci_dev *hdev = req->hdev; |
| struct hci_cp_write_le_host_supported cp; |
| |
| /* LE-only devices do not support explicit enablement */ |
| if (!lmp_bredr_capable(hdev)) |
| return; |
| |
| memset(&cp, 0, sizeof(cp)); |
| |
| if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { |
| cp.le = 0x01; |
| cp.simul = 0x00; |
| } |
| |
| if (cp.le != lmp_host_le_capable(hdev)) |
| hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp), |
| &cp); |
| } |
| |
| static void hci_set_event_mask_page_2(struct hci_request *req) |
| { |
| struct hci_dev *hdev = req->hdev; |
| u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| bool changed = false; |
| |
| /* If Connectionless Slave Broadcast master role is supported |
| * enable all necessary events for it. |
| */ |
| if (lmp_csb_master_capable(hdev)) { |
| events[1] |= 0x40; /* Triggered Clock Capture */ |
| events[1] |= 0x80; /* Synchronization Train Complete */ |
| events[2] |= 0x10; /* Slave Page Response Timeout */ |
| events[2] |= 0x20; /* CSB Channel Map Change */ |
| changed = true; |
| } |
| |
| /* If Connectionless Slave Broadcast slave role is supported |
| * enable all necessary events for it. |
| */ |
| if (lmp_csb_slave_capable(hdev)) { |
| events[2] |= 0x01; /* Synchronization Train Received */ |
| events[2] |= 0x02; /* CSB Receive */ |
| events[2] |= 0x04; /* CSB Timeout */ |
| events[2] |= 0x08; /* Truncated Page Complete */ |
| changed = true; |
| } |
| |
| /* Enable Authenticated Payload Timeout Expired event if supported */ |
| if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { |
| events[2] |= 0x80; |
| changed = true; |
| } |
| |
| /* Some Broadcom based controllers indicate support for Set Event |
| * Mask Page 2 command, but then actually do not support it. Since |
| * the default value is all bits set to zero, the command is only |
| * required if the event mask has to be changed. In case no change |
| * to the event mask is needed, skip this command. |
| */ |
| if (changed) |
| hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, |
| sizeof(events), events); |
| } |
| |
| static int hci_init3_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_dev *hdev = req->hdev; |
| u8 p; |
| |
| hci_setup_event_mask(req); |
| |
| if (hdev->commands[6] & 0x20 && |
| !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { |
| struct hci_cp_read_stored_link_key cp; |
| |
| bacpy(&cp.bdaddr, BDADDR_ANY); |
| cp.read_all = 0x01; |
| hci_req_add(req, HCI_OP_READ_STORED_LINK_KEY, sizeof(cp), &cp); |
| } |
| |
| if (hdev->commands[5] & 0x10) |
| hci_setup_link_policy(req); |
| |
| if (hdev->commands[8] & 0x01) |
| hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL); |
| |
| /* Some older Broadcom based Bluetooth 1.2 controllers do not |
| * support the Read Page Scan Type command. Check support for |
| * this command in the bit mask of supported commands. |
| */ |
| if (hdev->commands[13] & 0x01) |
| hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL); |
| |
| if (lmp_le_capable(hdev)) { |
| u8 events[8]; |
| |
| memset(events, 0, sizeof(events)); |
| |
| if (hdev->le_features[0] & HCI_LE_ENCRYPTION) |
| events[0] |= 0x10; /* LE Long Term Key Request */ |
| |
| /* If controller supports the Connection Parameters Request |
| * Link Layer Procedure, enable the corresponding event. |
| */ |
| if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) |
| events[0] |= 0x20; /* LE Remote Connection |
| * Parameter Request |
| */ |
| |
| /* If the controller supports the Data Length Extension |
| * feature, enable the corresponding event. |
| */ |
| if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) |
| events[0] |= 0x40; /* LE Data Length Change */ |
| |
| /* If the controller supports Extended Scanner Filter |
| * Policies, enable the correspondig event. |
| */ |
| if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) |
| events[1] |= 0x04; /* LE Direct Advertising |
| * Report |
| */ |
| |
| /* If the controller supports Channel Selection Algorithm #2 |
| * feature, enable the corresponding event. |
| */ |
| if (hdev->le_features[1] & HCI_LE_CHAN_SEL_ALG2) |
| events[2] |= 0x08; /* LE Channel Selection |
| * Algorithm |
| */ |
| |
| /* If the controller supports the LE Set Scan Enable command, |
| * enable the corresponding advertising report event. |
| */ |
| if (hdev->commands[26] & 0x08) |
| events[0] |= 0x02; /* LE Advertising Report */ |
| |
| /* If the controller supports the LE Create Connection |
| * command, enable the corresponding event. |
| */ |
| if (hdev->commands[26] & 0x10) |
| events[0] |= 0x01; /* LE Connection Complete */ |
| |
| /* If the controller supports the LE Connection Update |
| * command, enable the corresponding event. |
| */ |
| if (hdev->commands[27] & 0x04) |
| events[0] |= 0x04; /* LE Connection Update |
| * Complete |
| */ |
| |
| /* If the controller supports the LE Read Remote Used Features |
| * command, enable the corresponding event. |
| */ |
| if (hdev->commands[27] & 0x20) |
| events[0] |= 0x08; /* LE Read Remote Used |
| * Features Complete |
| */ |
| |
| /* If the controller supports the LE Read Local P-256 |
| * Public Key command, enable the corresponding event. |
| */ |
| if (hdev->commands[34] & 0x02) |
| events[0] |= 0x80; /* LE Read Local P-256 |
| * Public Key Complete |
| */ |
| |
| /* If the controller supports the LE Generate DHKey |
| * command, enable the corresponding event. |
| */ |
| if (hdev->commands[34] & 0x04) |
| events[1] |= 0x01; /* LE Generate DHKey Complete */ |
| |
| /* If the controller supports the LE Set Default PHY or |
| * LE Set PHY commands, enable the corresponding event. |
| */ |
| if (hdev->commands[35] & (0x20 | 0x40)) |
| events[1] |= 0x08; /* LE PHY Update Complete */ |
| |
| /* If the controller supports LE Set Extended Scan Parameters |
| * and LE Set Extended Scan Enable commands, enable the |
| * corresponding event. |
| */ |
| if (use_ext_scan(hdev)) |
| events[1] |= 0x10; /* LE Extended Advertising |
| * Report |
| */ |
| |
| /* If the controller supports the LE Extended Create Connection |
| * command, enable the corresponding event. |
| */ |
| if (use_ext_conn(hdev)) |
| events[1] |= 0x02; /* LE Enhanced Connection |
| * Complete |
| */ |
| |
| /* If the controller supports the LE Extended Advertising |
| * command, enable the corresponding event. |
| */ |
| if (ext_adv_capable(hdev)) |
| events[2] |= 0x02; /* LE Advertising Set |
| * Terminated |
| */ |
| |
| hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events), |
| events); |
| |
| /* Read LE Advertising Channel TX Power */ |
| if ((hdev->commands[25] & 0x40) && !ext_adv_capable(hdev)) { |
| /* HCI TS spec forbids mixing of legacy and extended |
| * advertising commands wherein READ_ADV_TX_POWER is |
| * also included. So do not call it if extended adv |
| * is supported otherwise controller will return |
| * COMMAND_DISALLOWED for extended commands. |
| */ |
| hci_req_add(req, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); |
| } |
| |
| if (hdev->commands[26] & 0x40) { |
| /* Read LE White List Size */ |
| hci_req_add(req, HCI_OP_LE_READ_WHITE_LIST_SIZE, |
| 0, NULL); |
| } |
| |
| if (hdev->commands[26] & 0x80) { |
| /* Clear LE White List */ |
| hci_req_add(req, HCI_OP_LE_CLEAR_WHITE_LIST, 0, NULL); |
| } |
| |
| if (hdev->commands[34] & 0x40) { |
| /* Read LE Resolving List Size */ |
| hci_req_add(req, HCI_OP_LE_READ_RESOLV_LIST_SIZE, |
| 0, NULL); |
| } |
| |
| if (hdev->commands[34] & 0x20) { |
| /* Clear LE Resolving List */ |
| hci_req_add(req, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL); |
| } |
| |
| if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { |
| /* Read LE Maximum Data Length */ |
| hci_req_add(req, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL); |
| |
| /* Read LE Suggested Default Data Length */ |
| hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL); |
| } |
| |
| if (ext_adv_capable(hdev)) { |
| /* Read LE Number of Supported Advertising Sets */ |
| hci_req_add(req, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, |
| 0, NULL); |
| } |
| |
| hci_set_le_support(req); |
| } |
| |
| /* Read features beyond page 1 if available */ |
| for (p = 2; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) { |
| struct hci_cp_read_local_ext_features cp; |
| |
| cp.page = p; |
| hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, |
| sizeof(cp), &cp); |
| } |
| |
| return 0; |
| } |
| |
| static int hci_init4_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| /* Some Broadcom based Bluetooth controllers do not support the |
| * Delete Stored Link Key command. They are clearly indicating its |
| * absence in the bit mask of supported commands. |
| * |
| * Check the supported commands and only if the the command is marked |
| * as supported send it. If not supported assume that the controller |
| * does not have actual support for stored link keys which makes this |
| * command redundant anyway. |
| * |
| * Some controllers indicate that they support handling deleting |
| * stored link keys, but they don't. The quirk lets a driver |
| * just disable this command. |
| */ |
| if (hdev->commands[6] & 0x80 && |
| !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { |
| struct hci_cp_delete_stored_link_key cp; |
| |
| bacpy(&cp.bdaddr, BDADDR_ANY); |
| cp.delete_all = 0x01; |
| hci_req_add(req, HCI_OP_DELETE_STORED_LINK_KEY, |
| sizeof(cp), &cp); |
| } |
| |
| /* Set event mask page 2 if the HCI command for it is supported */ |
| if (hdev->commands[22] & 0x04) |
| hci_set_event_mask_page_2(req); |
| |
| /* Read local codec list if the HCI command is supported */ |
| if (hdev->commands[29] & 0x20) |
| hci_req_add(req, HCI_OP_READ_LOCAL_CODECS, 0, NULL); |
| |
| /* Get MWS transport configuration if the HCI command is supported */ |
| if (hdev->commands[30] & 0x08) |
| hci_req_add(req, HCI_OP_GET_MWS_TRANSPORT_CONFIG, 0, NULL); |
| |
| /* Check for Synchronization Train support */ |
| if (lmp_sync_train_capable(hdev)) |
| hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); |
| |
| /* Enable Secure Connections if supported and configured */ |
| if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) && |
| bredr_sc_enabled(hdev)) { |
| u8 support = 0x01; |
| |
| hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT, |
| sizeof(support), &support); |
| } |
| |
| /* Set Suggested Default Data Length to maximum if supported */ |
| if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { |
| struct hci_cp_le_write_def_data_len cp; |
| |
| cp.tx_len = hdev->le_max_tx_len; |
| cp.tx_time = hdev->le_max_tx_time; |
| hci_req_add(req, HCI_OP_LE_WRITE_DEF_DATA_LEN, sizeof(cp), &cp); |
| } |
| |
| /* Set Default PHY parameters if command is supported */ |
| if (hdev->commands[35] & 0x20) { |
| struct hci_cp_le_set_default_phy cp; |
| |
| cp.all_phys = 0x00; |
| cp.tx_phys = hdev->le_tx_def_phys; |
| cp.rx_phys = hdev->le_rx_def_phys; |
| |
| hci_req_add(req, HCI_OP_LE_SET_DEFAULT_PHY, sizeof(cp), &cp); |
| } |
| |
| return 0; |
| } |
| |
| static int __hci_init(struct hci_dev *hdev) |
| { |
| int err; |
| |
| err = __hci_req_sync(hdev, hci_init1_req, 0, HCI_INIT_TIMEOUT, NULL); |
| if (err < 0) |
| return err; |
| |
| if (hci_dev_test_flag(hdev, HCI_SETUP)) |
| hci_debugfs_create_basic(hdev); |
| |
| err = __hci_req_sync(hdev, hci_init2_req, 0, HCI_INIT_TIMEOUT, NULL); |
| if (err < 0) |
| return err; |
| |
| /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode |
| * BR/EDR/LE type controllers. AMP controllers only need the |
| * first two stages of init. |
| */ |
| if (hdev->dev_type != HCI_PRIMARY) |
| return 0; |
| |
| err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT, NULL); |
| if (err < 0) |
| return err; |
| |
| err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT, NULL); |
| if (err < 0) |
| return err; |
| |
| /* This function is only called when the controller is actually in |
| * configured state. When the controller is marked as unconfigured, |
| * this initialization procedure is not run. |
| * |
| * It means that it is possible that a controller runs through its |
| * setup phase and then discovers missing settings. If that is the |
| * case, then this function will not be called. It then will only |
| * be called during the config phase. |
| * |
| * So only when in setup phase or config phase, create the debugfs |
| * entries and register the SMP channels. |
| */ |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && |
| !hci_dev_test_flag(hdev, HCI_CONFIG)) |
| return 0; |
| |
| hci_debugfs_create_common(hdev); |
| |
| if (lmp_bredr_capable(hdev)) |
| hci_debugfs_create_bredr(hdev); |
| |
| if (lmp_le_capable(hdev)) |
| hci_debugfs_create_le(hdev); |
| |
| return 0; |
| } |
| |
| static int hci_init0_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_dev *hdev = req->hdev; |
| |
| BT_DBG("%s %ld", hdev->name, opt); |
| |
| /* Reset */ |
| if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) |
| hci_reset_req(req, 0); |
| |
| /* Read Local Version */ |
| hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); |
| |
| /* Read BD Address */ |
| if (hdev->set_bdaddr) |
| hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); |
| |
| return 0; |
| } |
| |
| static int __hci_unconf_init(struct hci_dev *hdev) |
| { |
| int err; |
| |
| if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) |
| return 0; |
| |
| err = __hci_req_sync(hdev, hci_init0_req, 0, HCI_INIT_TIMEOUT, NULL); |
| if (err < 0) |
| return err; |
| |
| if (hci_dev_test_flag(hdev, HCI_SETUP)) |
| hci_debugfs_create_basic(hdev); |
| |
| return 0; |
| } |
| |
| static int hci_scan_req(struct hci_request *req, unsigned long opt) |
| { |
| __u8 scan = opt; |
| |
| BT_DBG("%s %x", req->hdev->name, scan); |
| |
| /* Inquiry and Page scans */ |
| hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan); |
| return 0; |
| } |
| |
| static int hci_auth_req(struct hci_request *req, unsigned long opt) |
| { |
| __u8 auth = opt; |
| |
| BT_DBG("%s %x", req->hdev->name, auth); |
| |
| /* Authentication */ |
| hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, 1, &auth); |
| return 0; |
| } |
| |
| static int hci_encrypt_req(struct hci_request *req, unsigned long opt) |
| { |
| __u8 encrypt = opt; |
| |
| BT_DBG("%s %x", req->hdev->name, encrypt); |
| |
| /* Encryption */ |
| hci_req_add(req, HCI_OP_WRITE_ENCRYPT_MODE, 1, &encrypt); |
| return 0; |
| } |
| |
| static int hci_linkpol_req(struct hci_request *req, unsigned long opt) |
| { |
| __le16 policy = cpu_to_le16(opt); |
| |
| BT_DBG("%s %x", req->hdev->name, policy); |
| |
| /* Default link policy */ |
| hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, 2, &policy); |
| return 0; |
| } |
| |
| /* Get HCI device by index. |
| * Device is held on return. */ |
| struct hci_dev *hci_dev_get(int index) |
| { |
| struct hci_dev *hdev = NULL, *d; |
| |
| BT_DBG("%d", index); |
| |
| if (index < 0) |
| return NULL; |
| |
| read_lock(&hci_dev_list_lock); |
| list_for_each_entry(d, &hci_dev_list, list) { |
| if (d->id == index) { |
| hdev = hci_dev_hold(d); |
| break; |
| } |
| } |
| read_unlock(&hci_dev_list_lock); |
| return hdev; |
| } |
| |
| /* ---- Inquiry support ---- */ |
| |
| bool hci_discovery_active(struct hci_dev *hdev) |
| { |
| struct discovery_state *discov = &hdev->discovery; |
| |
| switch (discov->state) { |
| case DISCOVERY_FINDING: |
| case DISCOVERY_RESOLVING: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| void hci_discovery_set_state(struct hci_dev *hdev, int state) |
| { |
| int old_state = hdev->discovery.state; |
| |
| BT_DBG("%s state %u -> %u", hdev->name, hdev->discovery.state, state); |
| |
| if (old_state == state) |
| return; |
| |
| hdev->discovery.state = state; |
| |
| switch (state) { |
| case DISCOVERY_STOPPED: |
| hci_update_background_scan(hdev); |
| |
| if (old_state != DISCOVERY_STARTING) |
| mgmt_discovering(hdev, 0); |
| break; |
| case DISCOVERY_STARTING: |
| break; |
| case DISCOVERY_FINDING: |
| mgmt_discovering(hdev, 1); |
| break; |
| case DISCOVERY_RESOLVING: |
| break; |
| case DISCOVERY_STOPPING: |
| break; |
| } |
| } |
| |
| void hci_inquiry_cache_flush(struct hci_dev *hdev) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_entry *p, *n; |
| |
| list_for_each_entry_safe(p, n, &cache->all, all) { |
| list_del(&p->all); |
| kfree(p); |
| } |
| |
| INIT_LIST_HEAD(&cache->unknown); |
| INIT_LIST_HEAD(&cache->resolve); |
| } |
| |
| struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev, |
| bdaddr_t *bdaddr) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_entry *e; |
| |
| BT_DBG("cache %p, %pMR", cache, bdaddr); |
| |
| list_for_each_entry(e, &cache->all, all) { |
| if (!bacmp(&e->data.bdaddr, bdaddr)) |
| return e; |
| } |
| |
| return NULL; |
| } |
| |
| struct inquiry_entry *hci_inquiry_cache_lookup_unknown(struct hci_dev *hdev, |
| bdaddr_t *bdaddr) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_entry *e; |
| |
| BT_DBG("cache %p, %pMR", cache, bdaddr); |
| |
| list_for_each_entry(e, &cache->unknown, list) { |
| if (!bacmp(&e->data.bdaddr, bdaddr)) |
| return e; |
| } |
| |
| return NULL; |
| } |
| |
| struct inquiry_entry *hci_inquiry_cache_lookup_resolve(struct hci_dev *hdev, |
| bdaddr_t *bdaddr, |
| int state) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_entry *e; |
| |
| BT_DBG("cache %p bdaddr %pMR state %d", cache, bdaddr, state); |
| |
| list_for_each_entry(e, &cache->resolve, list) { |
| if (!bacmp(bdaddr, BDADDR_ANY) && e->name_state == state) |
| return e; |
| if (!bacmp(&e->data.bdaddr, bdaddr)) |
| return e; |
| } |
| |
| return NULL; |
| } |
| |
| void hci_inquiry_cache_update_resolve(struct hci_dev *hdev, |
| struct inquiry_entry *ie) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct list_head *pos = &cache->resolve; |
| struct inquiry_entry *p; |
| |
| list_del(&ie->list); |
| |
| list_for_each_entry(p, &cache->resolve, list) { |
| if (p->name_state != NAME_PENDING && |
| abs(p->data.rssi) >= abs(ie->data.rssi)) |
| break; |
| pos = &p->list; |
| } |
| |
| list_add(&ie->list, pos); |
| } |
| |
| u32 hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data, |
| bool name_known) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_entry *ie; |
| u32 flags = 0; |
| |
| BT_DBG("cache %p, %pMR", cache, &data->bdaddr); |
| |
| hci_remove_remote_oob_data(hdev, &data->bdaddr, BDADDR_BREDR); |
| |
| if (!data->ssp_mode) |
| flags |= MGMT_DEV_FOUND_LEGACY_PAIRING; |
| |
| ie = hci_inquiry_cache_lookup(hdev, &data->bdaddr); |
| if (ie) { |
| if (!ie->data.ssp_mode) |
| flags |= MGMT_DEV_FOUND_LEGACY_PAIRING; |
| |
| if (ie->name_state == NAME_NEEDED && |
| data->rssi != ie->data.rssi) { |
| ie->data.rssi = data->rssi; |
| hci_inquiry_cache_update_resolve(hdev, ie); |
| } |
| |
| goto update; |
| } |
| |
| /* Entry not in the cache. Add new one. */ |
| ie = kzalloc(sizeof(*ie), GFP_KERNEL); |
| if (!ie) { |
| flags |= MGMT_DEV_FOUND_CONFIRM_NAME; |
| goto done; |
| } |
| |
| list_add(&ie->all, &cache->all); |
| |
| if (name_known) { |
| ie->name_state = NAME_KNOWN; |
| } else { |
| ie->name_state = NAME_NOT_KNOWN; |
| list_add(&ie->list, &cache->unknown); |
| } |
| |
| update: |
| if (name_known && ie->name_state != NAME_KNOWN && |
| ie->name_state != NAME_PENDING) { |
| ie->name_state = NAME_KNOWN; |
| list_del(&ie->list); |
| } |
| |
| memcpy(&ie->data, data, sizeof(*data)); |
| ie->timestamp = jiffies; |
| cache->timestamp = jiffies; |
| |
| if (ie->name_state == NAME_NOT_KNOWN) |
| flags |= MGMT_DEV_FOUND_CONFIRM_NAME; |
| |
| done: |
| return flags; |
| } |
| |
| static int inquiry_cache_dump(struct hci_dev *hdev, int num, __u8 *buf) |
| { |
| struct discovery_state *cache = &hdev->discovery; |
| struct inquiry_info *info = (struct inquiry_info *) buf; |
| struct inquiry_entry *e; |
| int copied = 0; |
| |
| list_for_each_entry(e, &cache->all, all) { |
| struct inquiry_data *data = &e->data; |
| |
| if (copied >= num) |
| break; |
| |
| bacpy(&info->bdaddr, &data->bdaddr); |
| info->pscan_rep_mode = data->pscan_rep_mode; |
| info->pscan_period_mode = data->pscan_period_mode; |
| info->pscan_mode = data->pscan_mode; |
| memcpy(info->dev_class, data->dev_class, 3); |
| info->clock_offset = data->clock_offset; |
| |
| info++; |
| copied++; |
| } |
| |
| BT_DBG("cache %p, copied %d", cache, copied); |
| return copied; |
| } |
| |
| static int hci_inq_req(struct hci_request *req, unsigned long opt) |
| { |
| struct hci_inquiry_req *ir = (struct hci_inquiry_req *) opt; |
| struct hci_dev *hdev = req->hdev; |
| struct hci_cp_inquiry cp; |
| |
| BT_DBG("%s", hdev->name); |
| |
| if (test_bit(HCI_INQUIRY, &hdev->flags)) |
| return 0; |
| |
| /* Start Inquiry */ |
| memcpy(&cp.lap, &ir->lap, 3); |
| cp.length = ir->length; |
| cp.num_rsp = ir->num_rsp; |
| hci_req_add(req, HCI_OP_INQUIRY, sizeof(cp), &cp); |
| |
| return 0; |
| } |
| |
| int hci_inquiry(void __user *arg) |
| { |
| __u8 __user *ptr = arg; |
| struct hci_inquiry_req ir; |
| struct hci_dev *hdev; |
| int err = 0, do_inquiry = 0, max_rsp; |
| long timeo; |
| __u8 *buf; |
| |
| if (copy_from_user(&ir, ptr, sizeof(ir))) |
| return -EFAULT; |
| |
| hdev = hci_dev_get(ir.dev_id); |
| if (!hdev) |
| return -ENODEV; |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| err = -EBUSY; |
| goto done; |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| if (hdev->dev_type != HCI_PRIMARY) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| hci_dev_lock(hdev); |
| if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX || |
| inquiry_cache_empty(hdev) || ir.flags & IREQ_CACHE_FLUSH) { |
| hci_inquiry_cache_flush(hdev); |
| do_inquiry = 1; |
| } |
| hci_dev_unlock(hdev); |
| |
| timeo = ir.length * msecs_to_jiffies(2000); |
| |
| if (do_inquiry) { |
| err = hci_req_sync(hdev, hci_inq_req, (unsigned long) &ir, |
| timeo, NULL); |
| if (err < 0) |
| goto done; |
| |
| /* Wait until Inquiry procedure finishes (HCI_INQUIRY flag is |
| * cleared). If it is interrupted by a signal, return -EINTR. |
| */ |
| if (wait_on_bit(&hdev->flags, HCI_INQUIRY, |
| TASK_INTERRUPTIBLE)) |
| return -EINTR; |
| } |
| |
| /* for unlimited number of responses we will use buffer with |
| * 255 entries |
| */ |
| max_rsp = (ir.num_rsp == 0) ? 255 : ir.num_rsp; |
| |
| /* cache_dump can't sleep. Therefore we allocate temp buffer and then |
| * copy it to the user space. |
| */ |
| buf = kmalloc_array(max_rsp, sizeof(struct inquiry_info), GFP_KERNEL); |
| if (!buf) { |
| err = -ENOMEM; |
| goto done; |
| } |
| |
| hci_dev_lock(hdev); |
| ir.num_rsp = inquiry_cache_dump(hdev, max_rsp, buf); |
| hci_dev_unlock(hdev); |
| |
| BT_DBG("num_rsp %d", ir.num_rsp); |
| |
| if (!copy_to_user(ptr, &ir, sizeof(ir))) { |
| ptr += sizeof(ir); |
| if (copy_to_user(ptr, buf, sizeof(struct inquiry_info) * |
| ir.num_rsp)) |
| err = -EFAULT; |
| } else |
| err = -EFAULT; |
| |
| kfree(buf); |
| |
| done: |
| hci_dev_put(hdev); |
| return err; |
| } |
| |
| static int hci_dev_do_open(struct hci_dev *hdev) |
| { |
| int ret = 0; |
| |
| BT_DBG("%s %p", hdev->name, hdev); |
| |
| hci_req_sync_lock(hdev); |
| |
| if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && |
| !hci_dev_test_flag(hdev, HCI_CONFIG)) { |
| /* Check for rfkill but allow the HCI setup stage to |
| * proceed (which in itself doesn't cause any RF activity). |
| */ |
| if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { |
| ret = -ERFKILL; |
| goto done; |
| } |
| |
| /* Check for valid public address or a configured static |
| * random adddress, but let the HCI setup proceed to |
| * be able to determine if there is a public address |
| * or not. |
| * |
| * In case of user channel usage, it is not important |
| * if a public address or static random address is |
| * available. |
| * |
| * This check is only valid for BR/EDR controllers |
| * since AMP controllers do not have an address. |
| */ |
| if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| hdev->dev_type == HCI_PRIMARY && |
| !bacmp(&hdev->bdaddr, BDADDR_ANY) && |
| !bacmp(&hdev->static_addr, BDADDR_ANY)) { |
| ret = -EADDRNOTAVAIL; |
| goto done; |
| } |
| } |
| |
| if (test_bit(HCI_UP, &hdev->flags)) { |
| ret = -EALREADY; |
| goto done; |
| } |
| |
| if (hdev->open(hdev)) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| set_bit(HCI_RUNNING, &hdev->flags); |
| hci_sock_dev_event(hdev, HCI_DEV_OPEN); |
| |
| atomic_set(&hdev->cmd_cnt, 1); |
| set_bit(HCI_INIT, &hdev->flags); |
| |
| if (hci_dev_test_flag(hdev, HCI_SETUP) || |
| test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) { |
| hci_sock_dev_event(hdev, HCI_DEV_SETUP); |
| |
| if (hdev->setup) |
| ret = hdev->setup(hdev); |
| |
| /* The transport driver can set these quirks before |
| * creating the HCI device or in its setup callback. |
| * |
| * In case any of them is set, the controller has to |
| * start up as unconfigured. |
| */ |
| if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || |
| test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks)) |
| hci_dev_set_flag(hdev, HCI_UNCONFIGURED); |
| |
| /* For an unconfigured controller it is required to |
| * read at least the version information provided by |
| * the Read Local Version Information command. |
| * |
| * If the set_bdaddr driver callback is provided, then |
| * also the original Bluetooth public device address |
| * will be read using the Read BD Address command. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) |
| ret = __hci_unconf_init(hdev); |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_CONFIG)) { |
| /* If public address change is configured, ensure that |
| * the address gets programmed. If the driver does not |
| * support changing the public address, fail the power |
| * on procedure. |
| */ |
| if (bacmp(&hdev->public_addr, BDADDR_ANY) && |
| hdev->set_bdaddr) |
| ret = hdev->set_bdaddr(hdev, &hdev->public_addr); |
| else |
| ret = -EADDRNOTAVAIL; |
| } |
| |
| if (!ret) { |
| if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| ret = __hci_init(hdev); |
| if (!ret && hdev->post_init) |
| ret = hdev->post_init(hdev); |
| } |
| } |
| |
| /* If the HCI Reset command is clearing all diagnostic settings, |
| * then they need to be reprogrammed after the init procedure |
| * completed. |
| */ |
| if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) |
| ret = hdev->set_diag(hdev, true); |
| |
| clear_bit(HCI_INIT, &hdev->flags); |
| |
| if (!ret) { |
| hci_dev_hold(hdev); |
| hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); |
| hci_adv_instances_set_rpa_expired(hdev, true); |
| set_bit(HCI_UP, &hdev->flags); |
| hci_sock_dev_event(hdev, HCI_DEV_UP); |
| hci_leds_update_powered(hdev, true); |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && |
| !hci_dev_test_flag(hdev, HCI_CONFIG) && |
| !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| hci_dev_test_flag(hdev, HCI_MGMT) && |
| hdev->dev_type == HCI_PRIMARY) { |
| ret = __hci_req_hci_power_on(hdev); |
| mgmt_power_on(hdev, ret); |
| } |
| } else { |
| /* Init failed, cleanup */ |
| flush_work(&hdev->tx_work); |
| flush_work(&hdev->cmd_work); |
| flush_work(&hdev->rx_work); |
| |
| skb_queue_purge(&hdev->cmd_q); |
| skb_queue_purge(&hdev->rx_q); |
| |
| if (hdev->flush) |
| hdev->flush(hdev); |
| |
| if (hdev->sent_cmd) { |
| kfree_skb(hdev->sent_cmd); |
| hdev->sent_cmd = NULL; |
| } |
| |
| clear_bit(HCI_RUNNING, &hdev->flags); |
| hci_sock_dev_event(hdev, HCI_DEV_CLOSE); |
| |
| hdev->close(hdev); |
| hdev->flags &= BIT(HCI_RAW); |
| } |
| |
| done: |
| hci_req_sync_unlock(hdev); |
| return ret; |
| } |
| |
| /* ---- HCI ioctl helpers ---- */ |
| |
| int hci_dev_open(__u16 dev) |
| { |
| struct hci_dev *hdev; |
| int err; |
| |
| hdev = hci_dev_get(dev); |
| if (!hdev) |
| return -ENODEV; |
| |
| /* Devices that are marked as unconfigured can only be powered |
| * up as user channel. Trying to bring them up as normal devices |
| * will result into a failure. Only user channel operation is |
| * possible. |
| * |
| * When this function is called for a user channel, the flag |
| * HCI_USER_CHANNEL will be set first before attempting to |
| * open the device. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| /* We need to ensure that no other power on/off work is pending |
| * before proceeding to call hci_dev_do_open. This is |
| * particularly important if the setup procedure has not yet |
| * completed. |
| */ |
| if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) |
| cancel_delayed_work(&hdev->power_off); |
| |
| /* After this call it is guaranteed that the setup procedure |
| * has finished. This means that error conditions like RFKILL |
| * or no valid public or static random address apply. |
| */ |
| flush_workqueue(hdev->req_workqueue); |
| |
| /* For controllers not using the management interface and that |
| * are brought up using legacy ioctl, set the HCI_BONDABLE bit |
| * so that pairing works for them. Once the management interface |
| * is in use this bit will be cleared again and userspace has |
| * to explicitly enable it. |
| */ |
| if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| !hci_dev_test_flag(hdev, HCI_MGMT)) |
| hci_dev_set_flag(hdev, HCI_BONDABLE); |
| |
| err = hci_dev_do_open(hdev); |
| |
| done: |
| hci_dev_put(hdev); |
| return err; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static void hci_pend_le_actions_clear(struct hci_dev *hdev) |
| { |
| struct hci_conn_params *p; |
| |
| list_for_each_entry(p, &hdev->le_conn_params, list) { |
| if (p->conn) { |
| hci_conn_drop(p->conn); |
| hci_conn_put(p->conn); |
| p->conn = NULL; |
| } |
| list_del_init(&p->action); |
| } |
| |
| BT_DBG("All LE pending actions cleared"); |
| } |
| |
| int hci_dev_do_close(struct hci_dev *hdev) |
| { |
| bool auto_off; |
| |
| BT_DBG("%s %p", hdev->name, hdev); |
| |
| if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| test_bit(HCI_UP, &hdev->flags)) { |
| /* Execute vendor specific shutdown routine */ |
| if (hdev->shutdown) |
| hdev->shutdown(hdev); |
| } |
| |
| cancel_delayed_work(&hdev->power_off); |
| |
| hci_request_cancel_all(hdev); |
| hci_req_sync_lock(hdev); |
| |
| if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { |
| cancel_delayed_work_sync(&hdev->cmd_timer); |
| hci_req_sync_unlock(hdev); |
| return 0; |
| } |
| |
| hci_leds_update_powered(hdev, false); |
| |
| /* Flush RX and TX works */ |
| flush_work(&hdev->tx_work); |
| flush_work(&hdev->rx_work); |
| |
| if (hdev->discov_timeout > 0) { |
| hdev->discov_timeout = 0; |
| hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); |
| hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); |
| } |
| |
| if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) |
| cancel_delayed_work(&hdev->service_cache); |
| |
| if (hci_dev_test_flag(hdev, HCI_MGMT)) { |
| struct adv_info *adv_instance; |
| |
| cancel_delayed_work_sync(&hdev->rpa_expired); |
| |
| list_for_each_entry(adv_instance, &hdev->adv_instances, list) |
| cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); |
| } |
| |
| /* Avoid potential lockdep warnings from the *_flush() calls by |
| * ensuring the workqueue is empty up front. |
| */ |
| drain_workqueue(hdev->workqueue); |
| |
| hci_dev_lock(hdev); |
| |
| hci_discovery_set_state(hdev, DISCOVERY_STOPPED); |
| |
| auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); |
| |
| if (!auto_off && hdev->dev_type == HCI_PRIMARY && |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && |
| hci_dev_test_flag(hdev, HCI_MGMT)) |
| __mgmt_power_off(hdev); |
| |
| hci_inquiry_cache_flush(hdev); |
| hci_pend_le_actions_clear(hdev); |
| hci_conn_hash_flush(hdev); |
| hci_dev_unlock(hdev); |
| |
| smp_unregister(hdev); |
| |
| hci_sock_dev_event(hdev, HCI_DEV_DOWN); |
| |
| if (hdev->flush) |
| hdev->flush(hdev); |
| |
| /* Reset device */ |
| skb_queue_purge(&hdev->cmd_q); |
| atomic_set(&hdev->cmd_cnt, 1); |
| if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && |
| !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { |
| set_bit(HCI_INIT, &hdev->flags); |
| __hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT, NULL); |
| clear_bit(HCI_INIT, &hdev->flags); |
| } |
| |
| /* flush cmd work */ |
| flush_work(&hdev->cmd_work); |
| |
| /* Drop queues */ |
| skb_queue_purge(&hdev->rx_q); |
| skb_queue_purge(&hdev->cmd_q); |
| skb_queue_purge(&hdev->raw_q); |
| |
| /* Drop last sent command */ |
| if (hdev->sent_cmd) { |
| cancel_delayed_work_sync(&hdev->cmd_timer); |
| kfree_skb(hdev->sent_cmd); |
| hdev->sent_cmd = NULL; |
| } |
| |
| clear_bit(HCI_RUNNING, &hdev->flags); |
| hci_sock_dev_event(hdev, HCI_DEV_CLOSE); |
| |
| /* After this point our queues are empty |
| * and no tasks are scheduled. */ |
| hdev->close(hdev); |
| |
| /* Clear flags */ |
| hdev->flags &= BIT(HCI_RAW); |
| hci_dev_clear_volatile_flags(hdev); |
| |
| /* Controller radio is available but is currently powered down */ |
| hdev->amp_status = AMP_STATUS_POWERED_DOWN; |
| |
| memset(hdev->eir, 0, sizeof(hdev->eir)); |
| memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); |
| bacpy(&hdev->random_addr, BDADDR_ANY); |
| |
| hci_req_sync_unlock(hdev); |
| |
| hci_dev_put(hdev); |
| return 0; |
| } |
| |
| int hci_dev_close(__u16 dev) |
| { |
| struct hci_dev *hdev; |
| int err; |
| |
| hdev = hci_dev_get(dev); |
| if (!hdev) |
| return -ENODEV; |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| err = -EBUSY; |
| goto done; |
| } |
| |
| if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) |
| cancel_delayed_work(&hdev->power_off); |
| |
| err = hci_dev_do_close(hdev); |
| |
| done: |
| hci_dev_put(hdev); |
| return err; |
| } |
| |
| static int hci_dev_do_reset(struct hci_dev *hdev) |
| { |
| int ret; |
| |
| BT_DBG("%s %p", hdev->name, hdev); |
| |
| hci_req_sync_lock(hdev); |
| |
| /* Drop queues */ |
| skb_queue_purge(&hdev->rx_q); |
| skb_queue_purge(&hdev->cmd_q); |
| |
| /* Avoid potential lockdep warnings from the *_flush() calls by |
| * ensuring the workqueue is empty up front. |
| */ |
| drain_workqueue(hdev->workqueue); |
| |
| hci_dev_lock(hdev); |
| hci_inquiry_cache_flush(hdev); |
| hci_conn_hash_flush(hdev); |
| hci_dev_unlock(hdev); |
| |
| if (hdev->flush) |
| hdev->flush(hdev); |
| |
| atomic_set(&hdev->cmd_cnt, 1); |
| hdev->acl_cnt = 0; hdev->sco_cnt = 0; hdev->le_cnt = 0; |
| |
| ret = __hci_req_sync(hdev, hci_reset_req, 0, HCI_INIT_TIMEOUT, NULL); |
| |
| hci_req_sync_unlock(hdev); |
| return ret; |
| } |
| |
| int hci_dev_reset(__u16 dev) |
| { |
| struct hci_dev *hdev; |
| int err; |
| |
| hdev = hci_dev_get(dev); |
| if (!hdev) |
| return -ENODEV; |
| |
| if (!test_bit(HCI_UP, &hdev->flags)) { |
| err = -ENETDOWN; |
| goto done; |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| err = -EBUSY; |
| goto done; |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| err = hci_dev_do_reset(hdev); |
| |
| done: |
| hci_dev_put(hdev); |
| return err; |
| } |
| |
| int hci_dev_reset_stat(__u16 dev) |
| { |
| struct hci_dev *hdev; |
| int ret = 0; |
| |
| hdev = hci_dev_get(dev); |
| if (!hdev) |
| return -ENODEV; |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| ret = -EBUSY; |
| goto done; |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { |
| ret = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| memset(&hdev->stat, 0, sizeof(struct hci_dev_stats)); |
| |
| done: |
| hci_dev_put(hdev); |
| return ret; |
| } |
| |
| static void hci_update_scan_state(struct hci_dev *hdev, u8 scan) |
| { |
| bool conn_changed, discov_changed; |
| |
| BT_DBG("%s scan 0x%02x", hdev->name, scan); |
| |
| if ((scan & SCAN_PAGE)) |
| conn_changed = !hci_dev_test_and_set_flag(hdev, |
| HCI_CONNECTABLE); |
| else |
| conn_changed = hci_dev_test_and_clear_flag(hdev, |
| HCI_CONNECTABLE); |
| |
| if ((scan & SCAN_INQUIRY)) { |
| discov_changed = !hci_dev_test_and_set_flag(hdev, |
| HCI_DISCOVERABLE); |
| } else { |
| hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); |
| discov_changed = hci_dev_test_and_clear_flag(hdev, |
| HCI_DISCOVERABLE); |
| } |
| |
| if (!hci_dev_test_flag(hdev, HCI_MGMT)) |
| return; |
| |
| if (conn_changed || discov_changed) { |
| /* In case this was disabled through mgmt */ |
| hci_dev_set_flag(hdev, HCI_BREDR_ENABLED); |
| |
| if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) |
| hci_req_update_adv_data(hdev, hdev->cur_adv_instance); |
| |
| mgmt_new_settings(hdev); |
| } |
| } |
| |
| int hci_dev_cmd(unsigned int cmd, void __user *arg) |
| { |
| struct hci_dev *hdev; |
| struct hci_dev_req dr; |
| int err = 0; |
| |
| if (copy_from_user(&dr, arg, sizeof(dr))) |
| return -EFAULT; |
| |
| hdev = hci_dev_get(dr.dev_id); |
| if (!hdev) |
| return -ENODEV; |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { |
| err = -EBUSY; |
| goto done; |
| } |
| |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| if (hdev->dev_type != HCI_PRIMARY) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| switch (cmd) { |
| case HCISETAUTH: |
| err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, |
| HCI_INIT_TIMEOUT, NULL); |
| break; |
| |
| case HCISETENCRYPT: |
| if (!lmp_encrypt_capable(hdev)) { |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| if (!test_bit(HCI_AUTH, &hdev->flags)) { |
| /* Auth must be enabled first */ |
| err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, |
| HCI_INIT_TIMEOUT, NULL); |
| if (err) |
| break; |
| } |
| |
| err = hci_req_sync(hdev, hci_encrypt_req, dr.dev_opt, |
| HCI_INIT_TIMEOUT, NULL); |
| break; |
| |
| case HCISETSCAN: |
| err = hci_req_sync(hdev, hci_scan_req, dr.dev_opt, |
| HCI_INIT_TIMEOUT, NULL); |
| |
| /* Ensure that the connectable and discoverable states |
| * get correctly modified as this was a non-mgmt change. |
| */ |
| if (!err) |
| hci_update_scan_state(hdev, dr.dev_opt); |
| break; |
| |
| case HCISETLINKPOL: |
| err = hci_req_sync(hdev, hci_linkpol_req, dr.dev_opt, |
| HCI_INIT_TIMEOUT, NULL); |
| break; |
| |
| case HCISETLINKMODE: |
| hdev->link_mode = ((__u16) dr.dev_opt) & |
| (HCI_LM_MASTER | HCI_LM_ACCEPT); |
| break; |
| |
| case HCISETPTYPE: |
| if (hdev->pkt_type == (__u16) dr.dev_opt) |
| break; |
| |
| hdev->pkt_type = (__u16) dr.dev_opt; |
| mgmt_phy_configuration_changed(hdev, NULL); |
| break; |
| |
| case HCISETACLMTU: |
| hdev->acl_mtu = *((__u16 *) &dr.dev_opt + 1); |
| hdev->acl_pkts = *((__u16 *) &dr.dev_opt + 0); |
| break; |
| |
| case HCISETSCOMTU: |
| hdev->sco_mtu = *((__u16 *) &dr.dev_opt + 1); |
| hdev->sco_pkts = *((__u16 *) &dr.dev_opt + 0); |
| break; |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| |
| done: |
| hci_dev_put(hdev); |
| return err; |
| } |
| |
| int hci_get_dev_list(void __user *arg) |
| { |
| struct hci_dev *hdev; |
| struct hci_dev_list_req *dl; |
| struct hci_dev_req *dr; |
| int n = 0, size, err; |
| __u16 dev_num; |
| |
| if (get_user(dev_num, (__u16 __user *) arg)) |
| return -EFAULT; |
| |
| if (!dev_num || dev_num > (PAGE_SIZE * 2) / sizeof(*dr)) |
| return -EINVAL; |
| |
| size = sizeof(*dl) + dev_num * sizeof(*dr); |
| |
| dl = kzalloc(size, GFP_KERNEL); |
| if (!dl) |
| return -ENOMEM; |
| |
| dr = dl->dev_req; |
| |
| read_lock(&hci_dev_list_lock); |
| list_for_each_entry(hdev, &hci_dev_list, list) { |
| unsigned long flags = hdev->flags; |
| |
| /* When the auto-off is configured it means the transport |
| * is running, but in that case still indicate that the |
| * device is actually down. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) |
| flags &= ~BIT(HCI_UP); |
| |
| (dr + n)->dev_id = hdev->id; |
| (dr + n)->dev_opt = flags; |
| |
| if (++n >= dev_num) |
| break; |
| } |
| read_unlock(&hci_dev_list_lock); |
| |
| dl->dev_num = n; |
| size = sizeof(*dl) + n * sizeof(*dr); |
| |
| err = copy_to_user(arg, dl, size); |
| kfree(dl); |
| |
| return err ? -EFAULT : 0; |
| } |
| |
| int hci_get_dev_info(void __user *arg) |
| { |
| struct hci_dev *hdev; |
| struct hci_dev_info di; |
| unsigned long flags; |
| int err = 0; |
| |
| if (copy_from_user(&di, arg, sizeof(di))) |
| return -EFAULT; |
| |
| hdev = hci_dev_get(di.dev_id); |
| if (!hdev) |
| return -ENODEV; |
| |
| /* When the auto-off is configured it means the transport |
| * is running, but in that case still indicate that the |
| * device is actually down. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) |
| flags = hdev->flags & ~BIT(HCI_UP); |
| else |
| flags = hdev->flags; |
| |
| strcpy(di.name, hdev->name); |
| di.bdaddr = hdev->bdaddr; |
| di.type = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4); |
| di.flags = flags; |
| di.pkt_type = hdev->pkt_type; |
| if (lmp_bredr_capable(hdev)) { |
| di.acl_mtu = hdev->acl_mtu; |
| di.acl_pkts = hdev->acl_pkts; |
| di.sco_mtu = hdev->sco_mtu; |
| di.sco_pkts = hdev->sco_pkts; |
| } else { |
| di.acl_mtu = hdev->le_mtu; |
| di.acl_pkts = hdev->le_pkts; |
| di.sco_mtu = 0; |
| di.sco_pkts = 0; |
| } |
| di.link_policy = hdev->link_policy; |
| di.link_mode = hdev->link_mode; |
| |
| memcpy(&di.stat, &hdev->stat, sizeof(di.stat)); |
| memcpy(&di.features, &hdev->features, sizeof(di.features)); |
| |
| if (copy_to_user(arg, &di, sizeof(di))) |
| err = -EFAULT; |
| |
| hci_dev_put(hdev); |
| |
| return err; |
| } |
| |
| /* ---- Interface to HCI drivers ---- */ |
| |
| static int hci_rfkill_set_block(void *data, bool blocked) |
| { |
| struct hci_dev *hdev = data; |
| |
| BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked); |
| |
| if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) |
| return -EBUSY; |
| |
| if (blocked) { |
| hci_dev_set_flag(hdev, HCI_RFKILLED); |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && |
| !hci_dev_test_flag(hdev, HCI_CONFIG)) |
| hci_dev_do_close(hdev); |
| } else { |
| hci_dev_clear_flag(hdev, HCI_RFKILLED); |
| } |
| |
| return 0; |
| } |
| |
| static const struct rfkill_ops hci_rfkill_ops = { |
| .set_block = hci_rfkill_set_block, |
| }; |
| |
| static void hci_power_on(struct work_struct *work) |
| { |
| struct hci_dev *hdev = container_of(work, struct hci_dev, power_on); |
| int err; |
| |
| BT_DBG("%s", hdev->name); |
| |
| if (test_bit(HCI_UP, &hdev->flags) && |
| hci_dev_test_flag(hdev, HCI_MGMT) && |
| hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { |
| cancel_delayed_work(&hdev->power_off); |
| hci_req_sync_lock(hdev); |
| err = __hci_req_hci_power_on(hdev); |
| hci_req_sync_unlock(hdev); |
| mgmt_power_on(hdev, err); |
| return; |
| } |
| |
| err = hci_dev_do_open(hdev); |
| if (err < 0) { |
| hci_dev_lock(hdev); |
| mgmt_set_powered_failed(hdev, err); |
| hci_dev_unlock(hdev); |
| return; |
| } |
| |
| /* During the HCI setup phase, a few error conditions are |
| * ignored and they need to be checked now. If they are still |
| * valid, it is important to turn the device back off. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_RFKILLED) || |
| hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || |
| (hdev->dev_type == HCI_PRIMARY && |
| !bacmp(&hdev->bdaddr, BDADDR_ANY) && |
| !bacmp(&hdev->static_addr, BDADDR_ANY))) { |
| hci_dev_clear_flag(hdev, HCI_AUTO_OFF); |
| hci_dev_do_close(hdev); |
| } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { |
| queue_delayed_work(hdev->req_workqueue, &hdev->power_off, |
| HCI_AUTO_OFF_TIMEOUT); |
| } |
| |
| if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { |
| /* For unconfigured devices, set the HCI_RAW flag |
| * so that userspace can easily identify them. |
| */ |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) |
| set_bit(HCI_RAW, &hdev->flags); |
| |
| /* For fully configured devices, this will send |
| * the Index Added event. For unconfigured devices, |
| * it will send Unconfigued Index Added event. |
| * |
| * Devices with HCI_QUIRK_RAW_DEVICE are ignored |
| * and no event will be send. |
| */ |
| mgmt_index_added(hdev); |
| } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { |
| /* When the controller is now configured, then it |
| * is important to clear the HCI_RAW flag. |
| */ |
| if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) |
| clear_bit(HCI_RAW, &hdev->flags); |
| |
| /* Powering on the controller with HCI_CONFIG set only |
| * happens with the transition from unconfigured to |
| * configured. This will send the Index Added event. |
| */ |
| mgmt_index_added(hdev); |
| } |
| } |
| |
| static void hci_power_off(struct work_struct *work) |
| { |
| struct hci_dev *hdev = container_of(work, struct hci_dev, |
| power_off.work); |
| |
| BT_DBG("%s", hdev->name); |
| |
| hci_dev_do_close(hdev); |
| } |
| |
| static void hci_error_reset(struct work_struct *work) |
| { |
| struct hci_dev *hdev = container_of(work, struct hci_dev, error_reset); |
| |
| BT_DBG("%s", hdev->name); |
| |
| if (hdev->hw_error) |
| hdev->hw_error(hdev, hdev->hw_error_code); |
| else |
| bt_dev_err(hdev, "hardware error 0x%2.2x", hdev->hw_error_code); |
| |
| if (hci_dev_do_close(hdev)) |
| return; |
| |
| hci_dev_do_open(hdev); |
| } |
| |
| void hci_uuids_clear(struct hci_dev *hdev) |
| { |
| struct bt_uuid *uuid, *tmp; |
| |
| list_for_each_entry_safe(uuid, tmp, &hdev->uuids, list) { |
| list_del(&uuid->list); |
| kfree(uuid); |
| } |
| } |
| |
| void hci_link_keys_clear(struct hci_dev *hdev) |
| { |
| struct link_key *key; |
| |
| list_for_each_entry_rcu(key, &hdev->link_keys, list) { |
| list_del_rcu(&key->list); |
| kfree_rcu(key, rcu); |
| } |
| } |
| |
| void hci_smp_ltks_clear(struct hci_dev *hdev) |
| { |
| struct smp_ltk *k; |
| |
| list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { |
| list_del_rcu(&k->list); |
| kfree_rcu(k, rcu); |
| } |
| } |
| |
| void hci_smp_irks_clear(struct hci_dev *hdev) |
| { |
| struct smp_irk *k; |
| |
| list_for_each_entry_rcu(k, &hdev->identity_resolving_keys, list) { |
| list_del_rcu(&k->list); |
| kfree_rcu(k, rcu); |
| } |
| } |
| |
| struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) |
| { |
| struct link_key *k; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(k, &hdev->link_keys, list) { |
| if (bacmp(bdaddr, &k->bdaddr) == 0) { |
| rcu_read_unlock(); |
| return k; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return NULL; |
| } |
| |
| static bool hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, |
| u8 key_type, u8 old_key_type) |
| { |
| /* Legacy key */ |
| if (key_type < 0x03) |
| return true; |
| |
| /* Debug keys are insecure so don't store them persistently */ |
| if (key_type == HCI_LK_DEBUG_COMBINATION) |
| return false; |
| |
| /* Changed combination key and there's no previous one */ |
| if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff) |
| return false; |
| |
| /* Security mode 3 case */ |
| if (!conn) |
| return true; |
| |
| /* BR/EDR key derived using SC from an LE link */ |
| if (conn->type == LE_LINK) |
| return true; |
| |
| /* Neither local nor remote side had no-bonding as requirement */ |
| if (conn->auth_type > 0x01 && conn->remote_auth > 0x01) |
| return true; |
| |
| /* Local side had dedicated bonding as requirement */ |
| if (conn->auth_type == 0x02 || conn->auth_type == 0x03) |
| return true; |
| |
| /* Remote side had dedicated bonding as requirement */ |
| if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) |
| return true; |
| |
| /* If none of the above criteria match, then don't store the key |
| * persistently */ |
| return false; |
| } |
| |
| static u8 ltk_role(u8 type) |
| { |
| if (type == SMP_LTK) |
| return HCI_ROLE_MASTER; |
| |
| return HCI_ROLE_SLAVE; |
| } |
| |
| struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 addr_type, u8 role) |
| { |
| struct smp_ltk *k; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { |
| if (addr_type != k->bdaddr_type || bacmp(bdaddr, &k->bdaddr)) |
| continue; |
| |
| if (smp_ltk_is_sc(k) || ltk_role(k->type) == role) { |
| rcu_read_unlock(); |
| return k; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return NULL; |
| } |
| |
| struct smp_irk *hci_find_irk_by_rpa(struct hci_dev *hdev, bdaddr_t *rpa) |
| { |
| struct smp_irk *irk; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { |
| if (!bacmp(&irk->rpa, rpa)) { |
| rcu_read_unlock(); |
| return irk; |
| } |
| } |
| |
| list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { |
| if (smp_irk_matches(hdev, irk->val, rpa)) { |
| bacpy(&irk->rpa, rpa); |
| rcu_read_unlock(); |
| return irk; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return NULL; |
| } |
| |
| struct smp_irk *hci_find_irk_by_addr(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 addr_type) |
| { |
| struct smp_irk *irk; |
| |
| /* Identity Address must be public or static random */ |
| if (addr_type == ADDR_LE_DEV_RANDOM && (bdaddr->b[5] & 0xc0) != 0xc0) |
| return NULL; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { |
| if (addr_type == irk->addr_type && |
| bacmp(bdaddr, &irk->bdaddr) == 0) { |
| rcu_read_unlock(); |
| return irk; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return NULL; |
| } |
| |
| struct link_key *hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, |
| bdaddr_t *bdaddr, u8 *val, u8 type, |
| u8 pin_len, bool *persistent) |
| { |
| struct link_key *key, *old_key; |
| u8 old_key_type; |
| |
| old_key = hci_find_link_key(hdev, bdaddr); |
| if (old_key) { |
| old_key_type = old_key->type; |
| key = old_key; |
| } else { |
| old_key_type = conn ? conn->key_type : 0xff; |
| key = kzalloc(sizeof(*key), GFP_KERNEL); |
| if (!key) |
| return NULL; |
| list_add_rcu(&key->list, &hdev->link_keys); |
| } |
| |
| BT_DBG("%s key for %pMR type %u", hdev->name, bdaddr, type); |
| |
| /* Some buggy controller combinations generate a changed |
| * combination key for legacy pairing even when there's no |
| * previous key */ |
| if (type == HCI_LK_CHANGED_COMBINATION && |
| (!conn || conn->remote_auth == 0xff) && old_key_type == 0xff) { |
| type = HCI_LK_COMBINATION; |
| if (conn) |
| conn->key_type = type; |
| } |
| |
| bacpy(&key->bdaddr, bdaddr); |
| memcpy(key->val, val, HCI_LINK_KEY_SIZE); |
| key->pin_len = pin_len; |
| |
| if (type == HCI_LK_CHANGED_COMBINATION) |
| key->type = old_key_type; |
| else |
| key->type = type; |
| |
| if (persistent) |
| *persistent = hci_persistent_key(hdev, conn, type, |
| old_key_type); |
| |
| return key; |
| } |
| |
| struct smp_ltk *hci_add_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 addr_type, u8 type, u8 authenticated, |
| u8 tk[16], u8 enc_size, __le16 ediv, __le64 rand) |
| { |
| struct smp_ltk *key, *old_key; |
| u8 role = ltk_role(type); |
| |
| old_key = hci_find_ltk(hdev, bdaddr, addr_type, role); |
| if (old_key) |
| key = old_key; |
| else { |
| key = kzalloc(sizeof(*key), GFP_KERNEL); |
| if (!key) |
| return NULL; |
| list_add_rcu(&key->list, &hdev->long_term_keys); |
| } |
| |
| bacpy(&key->bdaddr, bdaddr); |
| key->bdaddr_type = addr_type; |
| memcpy(key->val, tk, sizeof(key->val)); |
| key->authenticated = authenticated; |
| key->ediv = ediv; |
| key->rand = rand; |
| key->enc_size = enc_size; |
| key->type = type; |
| |
| return key; |
| } |
| |
| struct smp_irk *hci_add_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 addr_type, u8 val[16], bdaddr_t *rpa) |
| { |
| struct smp_irk *irk; |
| |
| irk = hci_find_irk_by_addr(hdev, bdaddr, addr_type); |
| if (!irk) { |
| irk = kzalloc(sizeof(*irk), GFP_KERNEL); |
| if (!irk) |
| return NULL; |
| |
| bacpy(&irk->bdaddr, bdaddr); |
| irk->addr_type = addr_type; |
| |
| list_add_rcu(&irk->list, &hdev->identity_resolving_keys); |
| } |
| |
| memcpy(irk->val, val, 16); |
| bacpy(&irk->rpa, rpa); |
| |
| return irk; |
| } |
| |
| int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) |
| { |
| struct link_key *key; |
| |
| key = hci_find_link_key(hdev, bdaddr); |
| if (!key) |
| return -ENOENT; |
| |
| BT_DBG("%s removing %pMR", hdev->name, bdaddr); |
| |
| list_del_rcu(&key->list); |
| kfree_rcu(key, rcu); |
| |
| return 0; |
| } |
| |
| int hci_remove_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 bdaddr_type) |
| { |
| struct smp_ltk *k; |
| int removed = 0; |
| |
| list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { |
| if (bacmp(bdaddr, &k->bdaddr) || k->bdaddr_type != bdaddr_type) |
| continue; |
| |
| BT_DBG("%s removing %pMR", hdev->name, bdaddr); |
| |
| list_del_rcu(&k->list); |
| kfree_rcu(k, rcu); |
| removed++; |
| } |
| |
| return removed ? 0 : -ENOENT; |
| } |
| |
| void hci_remove_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 addr_type) |
| { |
| struct smp_irk *k; |
| |
| list_for_each_entry_rcu(k, &hdev->identity_resolving_keys, list) { |
| if (bacmp(bdaddr, &k->bdaddr) || k->addr_type != addr_type) |
| continue; |
| |
| BT_DBG("%s removing %pMR", hdev->name, bdaddr); |
| |
| list_del_rcu(&k->list); |
| kfree_rcu(k, rcu); |
| } |
| } |
| |
| bool hci_bdaddr_is_paired(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type) |
| { |
| struct smp_ltk *k; |
| struct smp_irk *irk; |
| u8 addr_type; |
| |
| if (type == BDADDR_BREDR) { |
| if (hci_find_link_key(hdev, bdaddr)) |
| return true; |
| return false; |
| } |
| |
| /* Convert to HCI addr type which struct smp_ltk uses */ |
| if (type == BDADDR_LE_PUBLIC) |
| addr_type = ADDR_LE_DEV_PUBLIC; |
| else |
| addr_type = ADDR_LE_DEV_RANDOM; |
| |
| irk = hci_get_irk(hdev, bdaddr, addr_type); |
| if (irk) { |
| bdaddr = &irk->bdaddr; |
| addr_type = irk->addr_type; |
| } |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { |
| if (k->bdaddr_type == addr_type && !bacmp(bdaddr, &k->bdaddr)) { |
| rcu_read_unlock(); |
| return true; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return false; |
| } |
| |
| /* HCI command timer function */ |
| static void hci_cmd_timeout(struct work_struct *work) |
| { |
| struct hci_dev *hdev = container_of(work, struct hci_dev, |
| cmd_timer.work); |
| |
| if (hdev->sent_cmd) { |
| struct hci_command_hdr *sent = (void *) hdev->sent_cmd->data; |
| u16 opcode = __le16_to_cpu(sent->opcode); |
| |
| bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode); |
| } else { |
| bt_dev_err(hdev, "command tx timeout"); |
| } |
| |
| atomic_set(&hdev->cmd_cnt, 1); |
| queue_work(hdev->workqueue, &hdev->cmd_work); |
| } |
| |
| struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev, |
| bdaddr_t *bdaddr, u8 bdaddr_type) |
| { |
| struct oob_data *data; |
| |
| list_for_each_entry(data, &hdev->remote_oob_data, list) { |
| if (bacmp(bdaddr, &data->bdaddr) != 0) |
| continue; |
| if (data->bdaddr_type != bdaddr_type) |
| continue; |
| return data; |
| } |
| |
| return NULL; |
| } |
| |
| int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 bdaddr_type) |
| { |
| struct oob_data *data; |
| |
| data = hci_find_remote_oob_data(hdev, bdaddr, bdaddr_type); |
| if (!data) |
| return -ENOENT; |
| |
| BT_DBG("%s removing %pMR (%u)", hdev->name, bdaddr, bdaddr_type); |
| |
| list_del(&data->list); |
| kfree(data); |
| |
| return 0; |
| } |
| |
| void hci_remote_oob_data_clear(struct hci_dev *hdev) |
| { |
| struct oob_data *data, *n; |
| |
| list_for_each_entry_safe(data, n, &hdev->remote_oob_data, list) { |
| list_del(&data->list); |
| kfree(data); |
| } |
| } |
| |
| int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 bdaddr_type, u8 *hash192, u8 *rand192, |
| u8 *hash256, u8 *rand256) |
| { |
| struct oob_data *data; |
| |
| data = hci_find_remote_oob_data(hdev, bdaddr, bdaddr_type); |
| if (!data) { |
| data = kmalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| bacpy(&data->bdaddr, bdaddr); |
| data->bdaddr_type = bdaddr_type; |
| list_add(&data->list, &hdev->remote_oob_data); |
| } |
| |
| if (hash192 && rand192) { |
| memcpy(data->hash192, hash192, sizeof(data->hash192)); |
| memcpy(data->rand192, rand192, sizeof(data->rand192)); |
| if (hash256 && rand256) |
| data->present = 0x03; |
| } else { |
| memset(data->hash192, 0, sizeof(data->hash192)); |
| memset(data->rand192, 0, sizeof(data->rand192)); |
| if (hash256 && rand256) |
| data->present = 0x02; |
| else |
| data->present = 0x00; |
| } |
| |
| if (hash256 && rand256) { |
| memcpy(data->hash256, hash256, sizeof(data->hash256)); |
| memcpy(data->rand256, rand256, sizeof(data->rand256)); |
| } else { |
| memset(data->hash256, 0, sizeof(data->hash256)); |
| memset(data->rand256, 0, sizeof(data->rand256)); |
| if (hash192 && rand192) |
| data->present = 0x01; |
| } |
| |
| BT_DBG("%s for %pMR", hdev->name, bdaddr); |
| |
| return 0; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| struct adv_info *hci_find_adv_instance(struct hci_dev *hdev, u8 instance) |
| { |
| struct adv_info *adv_instance; |
| |
| list_for_each_entry(adv_instance, &hdev->adv_instances, list) { |
| if (adv_instance->instance == instance) |
| return adv_instance; |
| } |
| |
| return NULL; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| struct adv_info *hci_get_next_instance(struct hci_dev *hdev, u8 instance) |
| { |
| struct adv_info *cur_instance; |
| |
| cur_instance = hci_find_adv_instance(hdev, instance); |
| if (!cur_instance) |
| return NULL; |
| |
| if (cur_instance == list_last_entry(&hdev->adv_instances, |
| struct adv_info, list)) |
| return list_first_entry(&hdev->adv_instances, |
| struct adv_info, list); |
| else |
| return list_next_entry(cur_instance, list); |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| int hci_remove_adv_instance(struct hci_dev *hdev, u8 instance) |
| { |
| struct adv_info *adv_instance; |
| |
| adv_instance = hci_find_adv_instance(hdev, instance); |
| if (!adv_instance) |
| return -ENOENT; |
| |
| BT_DBG("%s removing %dMR", hdev->name, instance); |
| |
| if (hdev->cur_adv_instance == instance) { |
| if (hdev->adv_instance_timeout) { |
| cancel_delayed_work(&hdev->adv_instance_expire); |
| hdev->adv_instance_timeout = 0; |
| } |
| hdev->cur_adv_instance = 0x00; |
| } |
| |
| cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); |
| |
| list_del(&adv_instance->list); |
| kfree(adv_instance); |
| |
| hdev->adv_instance_cnt--; |
| |
| return 0; |
| } |
| |
| void hci_adv_instances_set_rpa_expired(struct hci_dev *hdev, bool rpa_expired) |
| { |
| struct adv_info *adv_instance, *n; |
| |
| list_for_each_entry_safe(adv_instance, n, &hdev->adv_instances, list) |
| adv_instance->rpa_expired = rpa_expired; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| void hci_adv_instances_clear(struct hci_dev *hdev) |
| { |
| struct adv_info *adv_instance, *n; |
| |
| if (hdev->adv_instance_timeout) { |
| cancel_delayed_work(&hdev->adv_instance_expire); |
| hdev->adv_instance_timeout = 0; |
| } |
| |
| list_for_each_entry_safe(adv_instance, n, &hdev->adv_instances, list) { |
| cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); |
| list_del(&adv_instance->list); |
| kfree(adv_instance); |
| } |
| |
| hdev->adv_instance_cnt = 0; |
| hdev->cur_adv_instance = 0x00; |
| } |
| |
| static void adv_instance_rpa_expired(struct work_struct *work) |
| { |
| struct adv_info *adv_instance = container_of(work, struct adv_info, |
| rpa_expired_cb.work); |
| |
| BT_DBG(""); |
| |
| adv_instance->rpa_expired = true; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| int hci_add_adv_instance(struct hci_dev *hdev, u8 instance, u32 flags, |
| u16 adv_data_len, u8 *adv_data, |
| u16 scan_rsp_len, u8 *scan_rsp_data, |
| u16 timeout, u16 duration) |
| { |
| struct adv_info *adv_instance; |
| |
| adv_instance = hci_find_adv_instance(hdev, instance); |
| if (adv_instance) { |
| memset(adv_instance->adv_data, 0, |
| sizeof(adv_instance->adv_data)); |
| memset(adv_instance->scan_rsp_data, 0, |
| sizeof(adv_instance->scan_rsp_data)); |
| } else { |
| if (hdev->adv_instance_cnt >= HCI_MAX_ADV_INSTANCES || |
| instance < 1 || instance > HCI_MAX_ADV_INSTANCES) |
| return -EOVERFLOW; |
| |
| adv_instance = kzalloc(sizeof(*adv_instance), GFP_KERNEL); |
| if (!adv_instance) |
| return -ENOMEM; |
| |
| adv_instance->pending = true; |
| adv_instance->instance = instance; |
| list_add(&adv_instance->list, &hdev->adv_instances); |
| hdev->adv_instance_cnt++; |
| } |
| |
| adv_instance->flags = flags; |
| adv_instance->adv_data_len = adv_data_len; |
| adv_instance->scan_rsp_len = scan_rsp_len; |
| |
| if (adv_data_len) |
| memcpy(adv_instance->adv_data, adv_data, adv_data_len); |
| |
| if (scan_rsp_len) |
| memcpy(adv_instance->scan_rsp_data, |
| scan_rsp_data, scan_rsp_len); |
| |
| adv_instance->timeout = timeout; |
| adv_instance->remaining_time = timeout; |
| |
| if (duration == 0) |
| adv_instance->duration = HCI_DEFAULT_ADV_DURATION; |
| else |
| adv_instance->duration = duration; |
| |
| adv_instance->tx_power = HCI_TX_POWER_INVALID; |
| |
| INIT_DELAYED_WORK(&adv_instance->rpa_expired_cb, |
| adv_instance_rpa_expired); |
| |
| BT_DBG("%s for %dMR", hdev->name, instance); |
| |
| return 0; |
| } |
| |
| struct bdaddr_list *hci_bdaddr_list_lookup(struct list_head *bdaddr_list, |
| bdaddr_t *bdaddr, u8 type) |
| { |
| struct bdaddr_list *b; |
| |
| list_for_each_entry(b, bdaddr_list, list) { |
| if (!bacmp(&b->bdaddr, bdaddr) && b->bdaddr_type == type) |
| return b; |
| } |
| |
| return NULL; |
| } |
| |
| void hci_bdaddr_list_clear(struct list_head *bdaddr_list) |
| { |
| struct bdaddr_list *b, *n; |
| |
| list_for_each_entry_safe(b, n, bdaddr_list, list) { |
| list_del(&b->list); |
| kfree(b); |
| } |
| } |
| |
| int hci_bdaddr_list_add(struct list_head *list, bdaddr_t *bdaddr, u8 type) |
| { |
| struct bdaddr_list *entry; |
| |
| if (!bacmp(bdaddr, BDADDR_ANY)) |
| return -EBADF; |
| |
| if (hci_bdaddr_list_lookup(list, bdaddr, type)) |
| return -EEXIST; |
| |
| entry = kzalloc(sizeof(*entry), GFP_KERNEL); |
| if (!entry) |
| return -ENOMEM; |
| |
| bacpy(&entry->bdaddr, bdaddr); |
| entry->bdaddr_type = type; |
| |
| list_add(&entry->list, list); |
| |
| return 0; |
| } |
| |
| int hci_bdaddr_list_del(struct list_head *list, bdaddr_t *bdaddr, u8 type) |
| { |
| struct bdaddr_list *entry; |
| |
| if (!bacmp(bdaddr, BDADDR_ANY)) { |
| hci_bdaddr_list_clear(list); |
| return 0; |
| } |
| |
| entry = hci_bdaddr_list_lookup(list, bdaddr, type); |
| if (!entry) |
| return -ENOENT; |
| |
| list_del(&entry->list); |
| kfree(entry); |
| |
| return 0; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev, |
| bdaddr_t *addr, u8 addr_type) |
| { |
| struct hci_conn_params *params; |
| |
| list_for_each_entry(params, &hdev->le_conn_params, list) { |
| if (bacmp(¶ms->addr, addr) == 0 && |
| params->addr_type == addr_type) { |
| return params; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list, |
| bdaddr_t *addr, u8 addr_type) |
| { |
| struct hci_conn_params *param; |
| |
| list_for_each_entry(param, list, action) { |
| if (bacmp(¶m->addr, addr) == 0 && |
| param->addr_type == addr_type) |
| return param; |
| } |
| |
| return NULL; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev, |
| bdaddr_t *addr, u8 addr_type) |
| { |
| struct hci_conn_params *params; |
| |
| params = hci_conn_params_lookup(hdev, addr, addr_type); |
| if (params) |
| return params; |
| |
| params = kzalloc(sizeof(*params), GFP_KERNEL); |
| if (!params) { |
| bt_dev_err(hdev, "out of memory"); |
| return NULL; |
| } |
| |
| bacpy(¶ms->addr, addr); |
| params->addr_type = addr_type; |
| |
| list_add(¶ms->list, &hdev->le_conn_params); |
| INIT_LIST_HEAD(¶ms->action); |
| |
| params->conn_min_interval = hdev->le_conn_min_interval; |
| params->conn_max_interval = hdev->le_conn_max_interval; |
| params->conn_latency = hdev->le_conn_latency; |
| params->supervision_timeout = hdev->le_supv_timeout; |
| params->auto_connect = HCI_AUTO_CONN_DISABLED; |
| |
| BT_DBG("addr %pMR (type %u)", addr, addr_type); |
| |
| return params; |
| } |
| |
| static void hci_conn_params_free(struct hci_conn_params *params) |
| { |
| if (params->conn) { |
| hci_conn_drop(params->conn); |
| hci_conn_put(params->conn); |
| } |
| |
| list_del(¶ms->action); |
| list_del(¶ms->list); |
| kfree(params); |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| void hci_conn_params_del(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type) |
| { |
| struct hci_conn_params *params; |
| |
| params = hci_conn_params_lookup(hdev, addr, addr_type); |
| if (!params) |
| return; |
| |
| hci_conn_params_free(params); |
| |
| hci_update_background_scan(hdev); |
| |
| BT_DBG("addr %pMR (type %u)", addr, addr_type); |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| void hci_conn_params_clear_disabled(struct hci_dev *hdev) |
| { |
| struct hci_conn_params *params, *tmp; |
| |
| list_for_each_entry_safe(params, tmp, &hdev->le_conn_params, list) { |
| if (params->auto_connect != HCI_AUTO_CONN_DISABLED) |
| continue; |
| |
| /* If trying to estabilish one time connection to disabled |
| * device, leave the params, but mark them as just once. |
| */ |
| if (params->explicit_connect) { |
| params->auto_connect = HCI_AUTO_CONN_EXPLICIT; |
| continue; |
| } |
| |
| list_del(¶ms->list); |
| kfree(params); |
| } |
| |
| BT_DBG("All LE disabled connection parameters were removed"); |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static void hci_conn_params_clear_all(struct hci_dev *hdev) |
| { |
| struct hci_conn_params *params, *tmp; |
| |
| list_for_each_entry_safe(params, tmp, &hdev->le_conn_params, list) |
| hci_conn_params_free(params); |
| |
| BT_DBG("All LE connection parameters were removed"); |
| } |
| |
| /* Copy the Identity Address of the controller. |
| * |
| * If the controller has a public BD_ADDR, then by default use that one. |
| * If this is a LE only controller without a public address, default to |
| * the static random address. |
| * |
| * For debugging purposes it is possible to force controllers with a |
| * public address to use the static random address instead. |
| * |
| * In case BR/EDR has been disabled on a dual-mode controller and |
| * userspace has configured a static address, then that address |
| * becomes the identity address instead of the public BR/EDR address. |
| */ |
| void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| u8 *bdaddr_type) |
| { |
| if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) || |
| !bacmp(&hdev->bdaddr, BDADDR_ANY) || |
| (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) && |
| bacmp(&hdev->static_addr, BDADDR_ANY))) { |
| bacpy(bdaddr, &hdev->static_addr); |
| *bdaddr_type = ADDR_LE_DEV_RANDOM; |
| } else { |
| bacpy(bdaddr, &hdev->bdaddr); |
| *bdaddr_type = ADDR_LE_DEV_PUBLIC; |
| } |
| } |
| |
| /* Alloc HCI device */ |
| struct hci_dev *hci_alloc_dev(void) |
| { |
| struct hci_dev *hdev; |
| |
| hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); |
| if (!hdev) |
| return NULL; |
| |
| hdev->pkt_type = (HCI_DM1 | HCI_DH1 | HCI_HV1); |
| hdev->esco_type = (ESCO_HV1); |
| hdev->link_mode = (HCI_LM_ACCEPT); |
| hdev->num_iac = 0x01; /* One IAC support is mandatory */ |
| hdev->io_capability = 0x03; /* No Input No Output */ |
| hdev->manufacturer = 0xffff; /* Default to internal use */ |
| hdev->inq_tx_power = HCI_TX_POWER_INVALID; |
| hdev->adv_tx_power = HCI_TX_POWER_INVALID; |
| hdev->adv_instance_cnt = 0; |
| hdev->cur_adv_instance = 0x00; |
| hdev->adv_instance_timeout = 0; |
| |
| hdev->sniff_max_interval = 800; |
| hdev->sniff_min_interval = 80; |
| |
| hdev->le_adv_channel_map = 0x07; |
| hdev->le_adv_min_interval = 0x0800; |
| hdev->le_adv_max_interval = 0x0800; |
| hdev->le_scan_interval = 0x0060; |
| hdev->le_scan_window = 0x0030; |
| hdev->le_conn_min_interval = 0x0018; |
| hdev->le_conn_max_interval = 0x0028; |
| hdev->le_conn_latency = 0x0000; |
| hdev->le_supv_timeout = 0x002a; |
| hdev->le_def_tx_len = 0x001b; |
| hdev->le_def_tx_time = 0x0148; |
| hdev->le_max_tx_len = 0x001b; |
| hdev->le_max_tx_time = 0x0148; |
| hdev->le_max_rx_len = 0x001b; |
| hdev->le_max_rx_time = 0x0148; |
| hdev->le_tx_def_phys = HCI_LE_SET_PHY_1M; |
| hdev->le_rx_def_phys = HCI_LE_SET_PHY_1M; |
| |
| hdev->rpa_timeout = HCI_DEFAULT_RPA_TIMEOUT; |
| hdev->discov_interleaved_timeout = DISCOV_INTERLEAVED_TIMEOUT; |
| hdev->conn_info_min_age = DEFAULT_CONN_INFO_MIN_AGE; |
| hdev->conn_info_max_age = DEFAULT_CONN_INFO_MAX_AGE; |
| |
| mutex_init(&hdev->lock); |
| mutex_init(&hdev->req_lock); |
| |
| INIT_LIST_HEAD(&hdev->mgmt_pending); |
| INIT_LIST_HEAD(&hdev->blacklist); |
| INIT_LIST_HEAD(&hdev->whitelist); |
| INIT_LIST_HEAD(&hdev->uuids); |
| INIT_LIST_HEAD(&hdev->link_keys); |
| INIT_LIST_HEAD(&hdev->long_term_keys); |
| INIT_LIST_HEAD(&hdev->identity_resolving_keys); |
| INIT_LIST_HEAD(&hdev->remote_oob_data); |
| INIT_LIST_HEAD(&hdev->le_white_list); |
| INIT_LIST_HEAD(&hdev->le_resolv_list); |
| INIT_LIST_HEAD(&hdev->le_conn_params); |
| INIT_LIST_HEAD(&hdev->pend_le_conns); |
| INIT_LIST_HEAD(&hdev->pend_le_reports); |
| INIT_LIST_HEAD(&hdev->conn_hash.list); |
| INIT_LIST_HEAD(&hdev->adv_instances); |
| |
| INIT_WORK(&hdev->rx_work, hci_rx_work); |
| INIT_WORK(&hdev->cmd_work, hci_cmd_work); |
| INIT_WORK(&hdev->tx_work, hci_tx_work); |
| INIT_WORK(&hdev->power_on, hci_power_on); |
| INIT_WORK |