blob: 1047802f4d2acc6e98693102a373bf365b8b3436 [file] [log] [blame]
/*
* P1021 MDS Device Tree Source
*
* Copyright 2010,2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
aliases {
ethernet3 = &enet3;
ethernet4 = &enet4;
};
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
0x1 0x0 0x0 0xf8000000 0x00008000
0x2 0x0 0x0 0xf8010000 0x00020000
0x3 0x0 0x0 0xf8020000 0x00020000>;
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x0 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND (RO) U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND (RO) DTB Image";
read-only;
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND (RO) Linux Kernel Image";
read-only;
};
partition@600000 {
/* 5MB for Compressed Root file System Image */
reg = <0x00600000 0x00500000>;
label = "NAND (RO) Compressed RFS Image";
read-only;
};
partition@b00000 {
/* 6MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00600000>;
label = "NAND (RW) JFFS2 Root File System";
};
partition@1100000 {
/* 14MB for JFFS2 based Root file System */
reg = <0x01100000 0x00e00000>;
label = "NAND (RW) Writable User area";
};
partition@1f00000 {
/* 1MB for microcode */
reg = <0x01f00000 0x00100000>;
label = "NAND (RO) QE Ucode";
read-only;
};
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
};
pib@2,0 {
compatible = "fsl,p1021mds-pib";
reg = <2 0 0x10000>;
};
pib@3,0 {
compatible = "fsl,p1021mds-pib";
reg = <3 0 0x10000>;
};
};
soc: soc@ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
usb@22000 {
phy_type = "ulpi";
dr_mode = "host";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
reg = <0x4>;
};
tbi-phy@5 {
device_type = "tbi-phy";
reg = <0x5>;
};
};
mdio@25000 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
};
ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@1 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@2 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
};
};
pci0: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
status = "disabled"; /* no firmware loaded */
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x0>;
};
qe_phy1: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x3>;
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
};
};
/include/ "p1021si-post.dtsi"