blob: 440e111651d53d9bba85763f0a04cde2796022b3 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
/dts-v1/;
#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A RDB Board";
compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
aliases {
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&esdhc {
mmc-hs200-1_8v;
sd-uhs-sdr104;
sd-uhs-sdr50;
sd-uhs-sdr25;
sd-uhs-sdr12;
};
&i2c0 {
status = "okay";
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
temp-sensor@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x52>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x53>;
};
};
&i2c3 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NAND Flashe and CPLD on board */
ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nand@0,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
cpld: board-control@2,0 {
compatible = "fsl,ls1046ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
};
&qspi {
num-cs = <2>;
bus-num = <0>;
status = "okay";
qflash0: s25fs512s@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
};
qflash1: s25fs512s@1 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <1>;
};
};
#include "fsl-ls1046-post.dtsi"
&fman0 {
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii";
};
ethernet@e8000 {
phy-handle = <&sgmii_phy1>;
phy-connection-type = "sgmii";
};
ethernet@ea000 {
phy-handle = <&sgmii_phy2>;
phy-connection-type = "sgmii";
};
ethernet@f0000 { /* 10GEC1 */
phy-handle = <&aqr106_phy>;
phy-connection-type = "xgmii";
};
ethernet@f2000 { /* 10GEC2 */
fixed-link = <0 1 1000 0 0>;
phy-connection-type = "xgmii";
};
mdio@fc000 {
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
sgmii_phy1: ethernet-phy@3 {
reg = <0x3>;
};
sgmii_phy2: ethernet-phy@4 {
reg = <0x4>;
};
};
mdio@fd000 {
aqr106_phy: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
interrupts = <0 131 4>;
reg = <0x0>;
};
};
};