| /* | |
| * linux/arch/x86_64/nmi.c | |
| * | |
| * NMI watchdog support on APIC systems | |
| * | |
| * Started by Ingo Molnar <mingo@redhat.com> | |
| * | |
| * Fixes: | |
| * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. | |
| * Mikael Pettersson : Power Management for local APIC NMI watchdog. | |
| * Pavel Machek and | |
| * Mikael Pettersson : PM converted to driver model. Disable/enable API. | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/mm.h> | |
| #include <linux/delay.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/module.h> | |
| #include <linux/sysdev.h> | |
| #include <linux/nmi.h> | |
| #include <linux/sysctl.h> | |
| #include <linux/kprobes.h> | |
| #include <asm/smp.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/mpspec.h> | |
| #include <asm/nmi.h> | |
| #include <asm/msr.h> | |
| #include <asm/proto.h> | |
| #include <asm/kdebug.h> | |
| #include <asm/local.h> | |
| #include <asm/mce.h> | |
| /* | |
| * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: | |
| * - it may be reserved by some other driver, or not | |
| * - when not reserved by some other driver, it may be used for | |
| * the NMI watchdog, or not | |
| * | |
| * This is maintained separately from nmi_active because the NMI | |
| * watchdog may also be driven from the I/O APIC timer. | |
| */ | |
| static DEFINE_SPINLOCK(lapic_nmi_owner_lock); | |
| static unsigned int lapic_nmi_owner; | |
| #define LAPIC_NMI_WATCHDOG (1<<0) | |
| #define LAPIC_NMI_RESERVED (1<<1) | |
| /* nmi_active: | |
| * +1: the lapic NMI watchdog is active, but can be disabled | |
| * 0: the lapic NMI watchdog has not been set up, and cannot | |
| * be enabled | |
| * -1: the lapic NMI watchdog is disabled, but can be enabled | |
| */ | |
| int nmi_active; /* oprofile uses this */ | |
| int panic_on_timeout; | |
| unsigned int nmi_watchdog = NMI_DEFAULT; | |
| static unsigned int nmi_hz = HZ; | |
| static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ | |
| static unsigned int nmi_p4_cccr_val; | |
| /* Note that these events don't tick when the CPU idles. This means | |
| the frequency varies with CPU load. */ | |
| #define K7_EVNTSEL_ENABLE (1 << 22) | |
| #define K7_EVNTSEL_INT (1 << 20) | |
| #define K7_EVNTSEL_OS (1 << 17) | |
| #define K7_EVNTSEL_USR (1 << 16) | |
| #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 | |
| #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING | |
| #define MSR_P4_MISC_ENABLE 0x1A0 | |
| #define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) | |
| #define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) | |
| #define MSR_P4_PERFCTR0 0x300 | |
| #define MSR_P4_CCCR0 0x360 | |
| #define P4_ESCR_EVENT_SELECT(N) ((N)<<25) | |
| #define P4_ESCR_OS (1<<3) | |
| #define P4_ESCR_USR (1<<2) | |
| #define P4_CCCR_OVF_PMI0 (1<<26) | |
| #define P4_CCCR_OVF_PMI1 (1<<27) | |
| #define P4_CCCR_THRESHOLD(N) ((N)<<20) | |
| #define P4_CCCR_COMPLEMENT (1<<19) | |
| #define P4_CCCR_COMPARE (1<<18) | |
| #define P4_CCCR_REQUIRED (3<<16) | |
| #define P4_CCCR_ESCR_SELECT(N) ((N)<<13) | |
| #define P4_CCCR_ENABLE (1<<12) | |
| /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter | |
| CRU_ESCR0 (with any non-null event selector) through a complemented | |
| max threshold. [IA32-Vol3, Section 14.9.9] */ | |
| #define MSR_P4_IQ_COUNTER0 0x30C | |
| #define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) | |
| #define P4_NMI_IQ_CCCR0 \ | |
| (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ | |
| P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) | |
| static __cpuinit inline int nmi_known_cpu(void) | |
| { | |
| switch (boot_cpu_data.x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| return boot_cpu_data.x86 == 15; | |
| case X86_VENDOR_INTEL: | |
| return boot_cpu_data.x86 == 15; | |
| } | |
| return 0; | |
| } | |
| /* Run after command line and cpu_init init, but before all other checks */ | |
| void __cpuinit nmi_watchdog_default(void) | |
| { | |
| if (nmi_watchdog != NMI_DEFAULT) | |
| return; | |
| if (nmi_known_cpu()) | |
| nmi_watchdog = NMI_LOCAL_APIC; | |
| else | |
| nmi_watchdog = NMI_IO_APIC; | |
| } | |
| #ifdef CONFIG_SMP | |
| /* The performance counters used by NMI_LOCAL_APIC don't trigger when | |
| * the CPU is idle. To make sure the NMI watchdog really ticks on all | |
| * CPUs during the test make them busy. | |
| */ | |
| static __init void nmi_cpu_busy(void *data) | |
| { | |
| volatile int *endflag = data; | |
| local_irq_enable(); | |
| /* Intentionally don't use cpu_relax here. This is | |
| to make sure that the performance counter really ticks, | |
| even if there is a simulator or similar that catches the | |
| pause instruction. On a real HT machine this is fine because | |
| all other CPUs are busy with "useless" delay loops and don't | |
| care if they get somewhat less cycles. */ | |
| while (*endflag == 0) | |
| barrier(); | |
| } | |
| #endif | |
| int __init check_nmi_watchdog (void) | |
| { | |
| volatile int endflag = 0; | |
| int *counts; | |
| int cpu; | |
| counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); | |
| if (!counts) | |
| return -1; | |
| printk(KERN_INFO "testing NMI watchdog ... "); | |
| #ifdef CONFIG_SMP | |
| if (nmi_watchdog == NMI_LOCAL_APIC) | |
| smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); | |
| #endif | |
| for (cpu = 0; cpu < NR_CPUS; cpu++) | |
| counts[cpu] = cpu_pda(cpu)->__nmi_count; | |
| local_irq_enable(); | |
| mdelay((10*1000)/nmi_hz); // wait 10 ticks | |
| for_each_online_cpu(cpu) { | |
| if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { | |
| endflag = 1; | |
| printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", | |
| cpu, | |
| counts[cpu], | |
| cpu_pda(cpu)->__nmi_count); | |
| nmi_active = 0; | |
| lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; | |
| nmi_perfctr_msr = 0; | |
| kfree(counts); | |
| return -1; | |
| } | |
| } | |
| endflag = 1; | |
| printk("OK.\n"); | |
| /* now that we know it works we can reduce NMI frequency to | |
| something more reasonable; makes a difference in some configs */ | |
| if (nmi_watchdog == NMI_LOCAL_APIC) | |
| nmi_hz = 1; | |
| kfree(counts); | |
| return 0; | |
| } | |
| int __init setup_nmi_watchdog(char *str) | |
| { | |
| int nmi; | |
| if (!strncmp(str,"panic",5)) { | |
| panic_on_timeout = 1; | |
| str = strchr(str, ','); | |
| if (!str) | |
| return 1; | |
| ++str; | |
| } | |
| get_option(&str, &nmi); | |
| if (nmi >= NMI_INVALID) | |
| return 0; | |
| nmi_watchdog = nmi; | |
| return 1; | |
| } | |
| __setup("nmi_watchdog=", setup_nmi_watchdog); | |
| static void disable_lapic_nmi_watchdog(void) | |
| { | |
| if (nmi_active <= 0) | |
| return; | |
| switch (boot_cpu_data.x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| wrmsr(MSR_K7_EVNTSEL0, 0, 0); | |
| break; | |
| case X86_VENDOR_INTEL: | |
| if (boot_cpu_data.x86 == 15) { | |
| wrmsr(MSR_P4_IQ_CCCR0, 0, 0); | |
| wrmsr(MSR_P4_CRU_ESCR0, 0, 0); | |
| } | |
| break; | |
| } | |
| nmi_active = -1; | |
| /* tell do_nmi() and others that we're not active any more */ | |
| nmi_watchdog = 0; | |
| } | |
| static void enable_lapic_nmi_watchdog(void) | |
| { | |
| if (nmi_active < 0) { | |
| nmi_watchdog = NMI_LOCAL_APIC; | |
| touch_nmi_watchdog(); | |
| setup_apic_nmi_watchdog(); | |
| } | |
| } | |
| int reserve_lapic_nmi(void) | |
| { | |
| unsigned int old_owner; | |
| spin_lock(&lapic_nmi_owner_lock); | |
| old_owner = lapic_nmi_owner; | |
| lapic_nmi_owner |= LAPIC_NMI_RESERVED; | |
| spin_unlock(&lapic_nmi_owner_lock); | |
| if (old_owner & LAPIC_NMI_RESERVED) | |
| return -EBUSY; | |
| if (old_owner & LAPIC_NMI_WATCHDOG) | |
| disable_lapic_nmi_watchdog(); | |
| return 0; | |
| } | |
| void release_lapic_nmi(void) | |
| { | |
| unsigned int new_owner; | |
| spin_lock(&lapic_nmi_owner_lock); | |
| new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED; | |
| lapic_nmi_owner = new_owner; | |
| spin_unlock(&lapic_nmi_owner_lock); | |
| if (new_owner & LAPIC_NMI_WATCHDOG) | |
| enable_lapic_nmi_watchdog(); | |
| } | |
| void disable_timer_nmi_watchdog(void) | |
| { | |
| if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0)) | |
| return; | |
| disable_irq(0); | |
| unset_nmi_callback(); | |
| nmi_active = -1; | |
| nmi_watchdog = NMI_NONE; | |
| } | |
| void enable_timer_nmi_watchdog(void) | |
| { | |
| if (nmi_active < 0) { | |
| nmi_watchdog = NMI_IO_APIC; | |
| touch_nmi_watchdog(); | |
| nmi_active = 1; | |
| enable_irq(0); | |
| } | |
| } | |
| #ifdef CONFIG_PM | |
| static int nmi_pm_active; /* nmi_active before suspend */ | |
| static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) | |
| { | |
| nmi_pm_active = nmi_active; | |
| disable_lapic_nmi_watchdog(); | |
| return 0; | |
| } | |
| static int lapic_nmi_resume(struct sys_device *dev) | |
| { | |
| if (nmi_pm_active > 0) | |
| enable_lapic_nmi_watchdog(); | |
| return 0; | |
| } | |
| static struct sysdev_class nmi_sysclass = { | |
| set_kset_name("lapic_nmi"), | |
| .resume = lapic_nmi_resume, | |
| .suspend = lapic_nmi_suspend, | |
| }; | |
| static struct sys_device device_lapic_nmi = { | |
| .id = 0, | |
| .cls = &nmi_sysclass, | |
| }; | |
| static int __init init_lapic_nmi_sysfs(void) | |
| { | |
| int error; | |
| if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC) | |
| return 0; | |
| error = sysdev_class_register(&nmi_sysclass); | |
| if (!error) | |
| error = sysdev_register(&device_lapic_nmi); | |
| return error; | |
| } | |
| /* must come after the local APIC's device_initcall() */ | |
| late_initcall(init_lapic_nmi_sysfs); | |
| #endif /* CONFIG_PM */ | |
| /* | |
| * Activate the NMI watchdog via the local APIC. | |
| * Original code written by Keith Owens. | |
| */ | |
| static void clear_msr_range(unsigned int base, unsigned int n) | |
| { | |
| unsigned int i; | |
| for(i = 0; i < n; ++i) | |
| wrmsr(base+i, 0, 0); | |
| } | |
| static void setup_k7_watchdog(void) | |
| { | |
| int i; | |
| unsigned int evntsel; | |
| nmi_perfctr_msr = MSR_K7_PERFCTR0; | |
| for(i = 0; i < 4; ++i) { | |
| /* Simulator may not support it */ | |
| if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) { | |
| nmi_perfctr_msr = 0; | |
| return; | |
| } | |
| wrmsrl(MSR_K7_PERFCTR0+i, 0UL); | |
| } | |
| evntsel = K7_EVNTSEL_INT | |
| | K7_EVNTSEL_OS | |
| | K7_EVNTSEL_USR | |
| | K7_NMI_EVENT; | |
| wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); | |
| wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); | |
| apic_write(APIC_LVTPC, APIC_DM_NMI); | |
| evntsel |= K7_EVNTSEL_ENABLE; | |
| wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); | |
| } | |
| static int setup_p4_watchdog(void) | |
| { | |
| unsigned int misc_enable, dummy; | |
| rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); | |
| if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) | |
| return 0; | |
| nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; | |
| nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; | |
| #ifdef CONFIG_SMP | |
| if (smp_num_siblings == 2) | |
| nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; | |
| #endif | |
| if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) | |
| clear_msr_range(0x3F1, 2); | |
| /* MSR 0x3F0 seems to have a default value of 0xFC00, but current | |
| docs doesn't fully define it, so leave it alone for now. */ | |
| if (boot_cpu_data.x86_model >= 0x3) { | |
| /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ | |
| clear_msr_range(0x3A0, 26); | |
| clear_msr_range(0x3BC, 3); | |
| } else { | |
| clear_msr_range(0x3A0, 31); | |
| } | |
| clear_msr_range(0x3C0, 6); | |
| clear_msr_range(0x3C8, 6); | |
| clear_msr_range(0x3E0, 2); | |
| clear_msr_range(MSR_P4_CCCR0, 18); | |
| clear_msr_range(MSR_P4_PERFCTR0, 18); | |
| wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); | |
| wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); | |
| Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz)); | |
| wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz)); | |
| apic_write(APIC_LVTPC, APIC_DM_NMI); | |
| wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); | |
| return 1; | |
| } | |
| void setup_apic_nmi_watchdog(void) | |
| { | |
| switch (boot_cpu_data.x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| if (boot_cpu_data.x86 != 15) | |
| return; | |
| if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) | |
| return; | |
| setup_k7_watchdog(); | |
| break; | |
| case X86_VENDOR_INTEL: | |
| if (boot_cpu_data.x86 != 15) | |
| return; | |
| if (!setup_p4_watchdog()) | |
| return; | |
| break; | |
| default: | |
| return; | |
| } | |
| lapic_nmi_owner = LAPIC_NMI_WATCHDOG; | |
| nmi_active = 1; | |
| } | |
| /* | |
| * the best way to detect whether a CPU has a 'hard lockup' problem | |
| * is to check it's local APIC timer IRQ counts. If they are not | |
| * changing then that CPU has some problem. | |
| * | |
| * as these watchdog NMI IRQs are generated on every CPU, we only | |
| * have to check the current processor. | |
| */ | |
| static DEFINE_PER_CPU(unsigned, last_irq_sum); | |
| static DEFINE_PER_CPU(local_t, alert_counter); | |
| static DEFINE_PER_CPU(int, nmi_touch); | |
| void touch_nmi_watchdog (void) | |
| { | |
| if (nmi_watchdog > 0) { | |
| unsigned cpu; | |
| /* | |
| * Tell other CPUs to reset their alert counters. We cannot | |
| * do it ourselves because the alert count increase is not | |
| * atomic. | |
| */ | |
| for_each_present_cpu (cpu) | |
| per_cpu(nmi_touch, cpu) = 1; | |
| } | |
| touch_softlockup_watchdog(); | |
| } | |
| void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) | |
| { | |
| int sum; | |
| int touched = 0; | |
| sum = read_pda(apic_timer_irqs); | |
| if (__get_cpu_var(nmi_touch)) { | |
| __get_cpu_var(nmi_touch) = 0; | |
| touched = 1; | |
| } | |
| #ifdef CONFIG_X86_MCE | |
| /* Could check oops_in_progress here too, but it's safer | |
| not too */ | |
| if (atomic_read(&mce_entry) > 0) | |
| touched = 1; | |
| #endif | |
| if (!touched && __get_cpu_var(last_irq_sum) == sum) { | |
| /* | |
| * Ayiee, looks like this CPU is stuck ... | |
| * wait a few IRQs (5 seconds) before doing the oops ... | |
| */ | |
| local_inc(&__get_cpu_var(alert_counter)); | |
| if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) { | |
| if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) | |
| == NOTIFY_STOP) { | |
| local_set(&__get_cpu_var(alert_counter), 0); | |
| return; | |
| } | |
| die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs); | |
| } | |
| } else { | |
| __get_cpu_var(last_irq_sum) = sum; | |
| local_set(&__get_cpu_var(alert_counter), 0); | |
| } | |
| if (nmi_perfctr_msr) { | |
| if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { | |
| /* | |
| * P4 quirks: | |
| * - An overflown perfctr will assert its interrupt | |
| * until the OVF flag in its CCCR is cleared. | |
| * - LVTPC is masked on interrupt and must be | |
| * unmasked by the LVTPC handler. | |
| */ | |
| wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); | |
| apic_write(APIC_LVTPC, APIC_DM_NMI); | |
| } | |
| wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); | |
| } | |
| } | |
| static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu) | |
| { | |
| return 0; | |
| } | |
| static nmi_callback_t nmi_callback = dummy_nmi_callback; | |
| asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) | |
| { | |
| int cpu = safe_smp_processor_id(); | |
| nmi_enter(); | |
| add_pda(__nmi_count,1); | |
| if (!rcu_dereference(nmi_callback)(regs, cpu)) | |
| default_do_nmi(regs); | |
| nmi_exit(); | |
| } | |
| void set_nmi_callback(nmi_callback_t callback) | |
| { | |
| vmalloc_sync_all(); | |
| rcu_assign_pointer(nmi_callback, callback); | |
| } | |
| void unset_nmi_callback(void) | |
| { | |
| nmi_callback = dummy_nmi_callback; | |
| } | |
| #ifdef CONFIG_SYSCTL | |
| static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) | |
| { | |
| unsigned char reason = get_nmi_reason(); | |
| char buf[64]; | |
| if (!(reason & 0xc0)) { | |
| sprintf(buf, "NMI received for unknown reason %02x\n", reason); | |
| die_nmi(buf,regs); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * proc handler for /proc/sys/kernel/unknown_nmi_panic | |
| */ | |
| int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file, | |
| void __user *buffer, size_t *length, loff_t *ppos) | |
| { | |
| int old_state; | |
| old_state = unknown_nmi_panic; | |
| proc_dointvec(table, write, file, buffer, length, ppos); | |
| if (!!old_state == !!unknown_nmi_panic) | |
| return 0; | |
| if (unknown_nmi_panic) { | |
| if (reserve_lapic_nmi() < 0) { | |
| unknown_nmi_panic = 0; | |
| return -EBUSY; | |
| } else { | |
| set_nmi_callback(unknown_nmi_panic_callback); | |
| } | |
| } else { | |
| release_lapic_nmi(); | |
| unset_nmi_callback(); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| EXPORT_SYMBOL(nmi_active); | |
| EXPORT_SYMBOL(nmi_watchdog); | |
| EXPORT_SYMBOL(reserve_lapic_nmi); | |
| EXPORT_SYMBOL(release_lapic_nmi); | |
| EXPORT_SYMBOL(disable_timer_nmi_watchdog); | |
| EXPORT_SYMBOL(enable_timer_nmi_watchdog); | |
| EXPORT_SYMBOL(touch_nmi_watchdog); |