| config MIPS | |
| bool | |
| default y | |
| # Horrible source of confusion. Die, die, die ... | |
| select EMBEDDED | |
| mainmenu "Linux/MIPS Kernel Configuration" | |
| menu "Machine selection" | |
| choice | |
| prompt "System type" | |
| default SGI_IP22 | |
| config MIPS_MTX1 | |
| bool "Support for 4G Systems MTX-1 board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SOC_AU1500 | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_BOSPORUS | |
| bool "AMD Alchemy Bosporus board" | |
| select SOC_AU1500 | |
| select DMA_NONCOHERENT | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_PB1000 | |
| bool "AMD Alchemy PB1000 board" | |
| select SOC_AU1000 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_PB1100 | |
| bool "AMD Alchemy PB1100 board" | |
| select SOC_AU1100 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_PB1500 | |
| bool "AMD Alchemy PB1500 board" | |
| select SOC_AU1500 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_PB1550 | |
| bool "AMD Alchemy PB1550 board" | |
| select SOC_AU1550 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select MIPS_DISABLE_OBSOLETE_IDE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_PB1200 | |
| bool "AMD Alchemy PB1200 board" | |
| select SOC_AU1200 | |
| select DMA_NONCOHERENT | |
| select MIPS_DISABLE_OBSOLETE_IDE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_DB1000 | |
| bool "AMD Alchemy DB1000 board" | |
| select SOC_AU1000 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_DB1100 | |
| bool "AMD Alchemy DB1100 board" | |
| select SOC_AU1100 | |
| select DMA_NONCOHERENT | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_DB1500 | |
| bool "AMD Alchemy DB1500 board" | |
| select SOC_AU1500 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select MIPS_DISABLE_OBSOLETE_IDE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_DB1550 | |
| bool "AMD Alchemy DB1550 board" | |
| select SOC_AU1550 | |
| select HW_HAS_PCI | |
| select DMA_NONCOHERENT | |
| select MIPS_DISABLE_OBSOLETE_IDE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_DB1200 | |
| bool "AMD Alchemy DB1200 board" | |
| select SOC_AU1200 | |
| select DMA_COHERENT | |
| select MIPS_DISABLE_OBSOLETE_IDE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_MIRAGE | |
| bool "AMD Alchemy Mirage board" | |
| select DMA_NONCOHERENT | |
| select SOC_AU1500 | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_COBALT | |
| bool "Support for Cobalt Server" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select I8259 | |
| select IRQ_CPU | |
| select MIPS_GT64111 | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MACH_DECSTATION | |
| bool "Support for DECstations" | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select EARLY_PRINTK | |
| select IRQ_CPU | |
| select SYS_HAS_CPU_R3000 | |
| select SYS_HAS_CPU_R4X00 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for DEC's MIPS based workstations. For details | |
| see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the | |
| DECstation porting pages on <http://decstation.unix-ag.org/>. | |
| If you have one of the following DECstation Models you definitely | |
| want to choose R4xx0 for the CPU Type: | |
| DECstation 5000/50 | |
| DECstation 5000/150 | |
| DECstation 5000/260 | |
| DECsystem 5900/260 | |
| otherwise choose R3000. | |
| config MIPS_EV64120 | |
| bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select MIPS_GT64120 | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| This is an evaluation board based on the Galileo GT-64120 | |
| single-chip system controller that contains a MIPS R5000 compatible | |
| core running at 75/100MHz. Their website is located at | |
| <http://www.marvell.com/>. Say Y here if you wish to build a | |
| kernel for this platform. | |
| config MIPS_EV96100 | |
| bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select MIPS_GT96100 | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| This is an evaluation board based on the Galileo GT-96100 LAN/WAN | |
| communications controllers containing a MIPS R5000 compatible core | |
| running at 83MHz. Their website is <http://www.marvell.com/>. Say Y | |
| here if you wish to build a kernel for this platform. | |
| config MIPS_IVR | |
| bool "Support for Globespan IVR board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select ITE_BOARD_GEN | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This is an evaluation board built by Globespan to showcase thir | |
| iVR (Internet Video Recorder) design. It utilizes a QED RM5231 | |
| R5000 MIPS core. More information can be found out their website | |
| located at <http://www.globespan.net/>. Say Y here if you wish to | |
| build a kernel for this platform. | |
| config MIPS_ITE8172 | |
| bool "Support for ITE 8172G board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select ITE_BOARD_GEN | |
| select SYS_HAS_CPU_R5432 | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| Ths is an evaluation board made by ITE <http://www.ite.com.tw/> | |
| with ATX form factor that utilizes a MIPS R5000 to work with its | |
| ITE8172G companion internet appliance chip. The MIPS core can be | |
| either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build | |
| a kernel for this platform. | |
| config MACH_JAZZ | |
| bool "Support for the Jazz family of machines" | |
| select ARC | |
| select ARC32 | |
| select ARCH_MAY_HAVE_PC_FDC | |
| select GENERIC_ISA_DMA | |
| select I8253 | |
| select I8259 | |
| select ISA | |
| select SYS_HAS_CPU_R4X00 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| help | |
| This a family of machines based on the MIPS R4030 chipset which was | |
| used by several vendors to build RISC/os and Windows NT workstations. | |
| Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and | |
| Olivetti M700-10 workstations. | |
| config LASAT | |
| bool "Support for LASAT Networks platforms" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select MIPS_GT64120 | |
| select MIPS_NILE4 | |
| select R5000_CPU_SCACHE | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config MIPS_ATLAS | |
| bool "Support for MIPS Atlas board" | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select IRQ_CPU | |
| select HW_HAS_PCI | |
| select MIPS_BOARDS_GEN | |
| select MIPS_BONITO64 | |
| select MIPS_GT64120 | |
| select MIPS_MSC | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_HAS_CPU_MIPS32_R2 | |
| select SYS_HAS_CPU_MIPS64_R1 | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the MIPS Technologies Atlas evaluation | |
| board. | |
| config MIPS_MALTA | |
| bool "Support for MIPS Malta board" | |
| select ARCH_MAY_HAVE_PC_FDC | |
| select BOOT_ELF32 | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select DMA_NONCOHERENT | |
| select IRQ_CPU | |
| select GENERIC_ISA_DMA | |
| select HW_HAS_PCI | |
| select I8259 | |
| select MIPS_BOARDS_GEN | |
| select MIPS_BONITO64 | |
| select MIPS_GT64120 | |
| select MIPS_MSC | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_HAS_CPU_MIPS32_R2 | |
| select SYS_HAS_CPU_MIPS64_R1 | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the MIPS Technologies Malta evaluation | |
| board. | |
| config MIPS_SEAD | |
| bool "Support for MIPS SEAD board (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| select IRQ_CPU | |
| select DMA_NONCOHERENT | |
| select MIPS_BOARDS_GEN | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_HAS_CPU_MIPS32_R2 | |
| select SYS_HAS_CPU_MIPS64_R1 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the MIPS Technologies SEAD evaluation | |
| board. | |
| config MIPS_SIM | |
| bool 'Support for MIPS simulator (MIPSsim)' | |
| select DMA_NONCOHERENT | |
| select IRQ_CPU | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_HAS_CPU_MIPS32_R2 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This option enables support for MIPS Technologies MIPSsim software | |
| emulator. | |
| config MOMENCO_JAGUAR_ATX | |
| bool "Support for Momentum Jaguar board" | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_CPU_RM7K | |
| select IRQ_MV64340 | |
| select LIMITED_DMA | |
| select PCI_MARVELL | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM9000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by | |
| Momentum Computer <http://www.momenco.com/>. | |
| config MOMENCO_OCELOT | |
| bool "Support for Momentum Ocelot board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_CPU_RM7K | |
| select MIPS_GT64120 | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by | |
| Momentum Computer <http://www.momenco.com/>. | |
| config MOMENCO_OCELOT_3 | |
| bool "Support for Momentum Ocelot-3 board" | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_CPU_RM7K | |
| select IRQ_MV64340 | |
| select PCI_MARVELL | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM9000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| The Ocelot-3 is based off Discovery III System Controller and | |
| PMC-Sierra Rm79000 core. | |
| config MOMENCO_OCELOT_C | |
| bool "Support for Momentum Ocelot-C board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_MV64340 | |
| select PCI_MARVELL | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by | |
| Momentum Computer <http://www.momenco.com/>. | |
| config MOMENCO_OCELOT_G | |
| bool "Support for Momentum Ocelot-G board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_CPU_RM7K | |
| select PCI_MARVELL | |
| select RM7000_CPU_SCACHE | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by | |
| Momentum Computer <http://www.momenco.com/>. | |
| config MIPS_XXS1500 | |
| bool "Support for MyCable XXS1500 board" | |
| select DMA_NONCOHERENT | |
| select SOC_AU1500 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config PNX8550_V2PCI | |
| bool "Support for Philips PNX8550 based Viper2-PCI board" | |
| select PNX8550 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config PNX8550_JBS | |
| bool "Support for Philips PNX8550 based JBS board" | |
| select PNX8550 | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config DDB5074 | |
| bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| select DDB5XXX_COMMON | |
| select DMA_NONCOHERENT | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select I8259 | |
| select ISA | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the VR5000-based NEC DDB Vrc-5074 | |
| evaluation board. | |
| config DDB5476 | |
| bool "Support for NEC DDB Vrc-5476" | |
| select DDB5XXX_COMMON | |
| select DMA_NONCOHERENT | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select I8259 | |
| select ISA | |
| select SYS_HAS_CPU_R5432 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the R5432-based NEC DDB Vrc-5476 | |
| evaluation board. | |
| Features : kernel debugging, serial terminal, NFS root fs, on-board | |
| ether port USB, AC97, PCI, PCI VGA card & framebuffer console, | |
| IDE controller, PS2 keyboard, PS2 mouse, etc. | |
| config DDB5477 | |
| bool "Support for NEC DDB Vrc-5477" | |
| select DDB5XXX_COMMON | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select I8259 | |
| select IRQ_CPU | |
| select SYS_HAS_CPU_R5432 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| This enables support for the R5432-based NEC DDB Vrc-5477, | |
| or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. | |
| Features : kernel debugging, serial terminal, NFS root fs, on-board | |
| ether port USB, AC97, PCI, etc. | |
| config MACH_VR41XX | |
| bool "Support for NEC VR4100 series based machines" | |
| select SYS_HAS_CPU_VR41XX | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| config PMC_YOSEMITE | |
| bool "Support for PMC-Sierra Yosemite eval board" | |
| select DMA_COHERENT | |
| select HW_HAS_PCI | |
| select IRQ_CPU | |
| select IRQ_CPU_RM7K | |
| select IRQ_CPU_RM9K | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_RM9000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_HIGHMEM | |
| help | |
| Yosemite is an evaluation board for the RM9000x2 processor | |
| manufactured by PMC-Sierra. | |
| config QEMU | |
| bool "Support for Qemu" | |
| select DMA_COHERENT | |
| select GENERIC_ISA_DMA | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select I8253 | |
| select I8259 | |
| select ISA | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| Qemu is a software emulator which among other architectures also | |
| can simulate a MIPS32 4Kc system. This patch adds support for the | |
| system architecture that currently is being simulated by Qemu. It | |
| will eventually be removed again when Qemu has the capability to | |
| simulate actual MIPS hardware platforms. More information on Qemu | |
| can be found at http://www.linux-mips.org/wiki/Qemu. | |
| config SGI_IP22 | |
| bool "Support for SGI IP22 (Indy/Indigo2)" | |
| select ARC | |
| select ARC32 | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_EISA | |
| select IP22_CPU_SCACHE | |
| select IRQ_CPU | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_R4X00 | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| This are the SGI Indy, Challenge S and Indigo2, as well as certain | |
| OEM variants like the Tandem CMN B006S. To compile a Linux kernel | |
| that runs on these, say Y here. | |
| config SGI_IP27 | |
| bool "Support for SGI IP27 (Origin200/2000)" | |
| select ARC | |
| select ARC64 | |
| select BOOT_ELF64 | |
| select DMA_IP27 | |
| select HW_HAS_PCI | |
| select PCI_DOMAINS | |
| select SYS_HAS_CPU_R10000 | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics | |
| workstations. To compile a Linux kernel that runs on these, say Y | |
| here. | |
| config SGI_IP32 | |
| bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL | |
| select ARC | |
| select ARC32 | |
| select BOOT_ELF32 | |
| select OWN_DMA | |
| select DMA_IP32 | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select R5000_CPU_SCACHE | |
| select RM7000_CPU_SCACHE | |
| select SYS_HAS_CPU_R5000 | |
| select SYS_HAS_CPU_R10000 if BROKEN | |
| select SYS_HAS_CPU_RM7000 | |
| select SYS_HAS_CPU_NEVADA | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| help | |
| If you want this kernel to run on SGI O2 workstation, say Y here. | |
| config SIBYTE_BIGSUR | |
| bool "Support for Sibyte BCM91480B-BigSur" | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select PCI_DOMAINS | |
| select SIBYTE_BCM1x80 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_SWARM | |
| bool "Support for Sibyte BCM91250A-SWARM" | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_SB1250 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_HIGHMEM | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_SENTOSA | |
| bool "Support for Sibyte BCM91250E-Sentosa" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_SB1250 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_RHONE | |
| bool "Support for Sibyte BCM91125E-Rhone" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_BCM1125H | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_CARMEL | |
| bool "Support for Sibyte BCM91120x-Carmel" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_BCM1120 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_PTSWARM | |
| bool "Support for Sibyte BCM91250PT-PTSWARM" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_SB1250 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_HIGHMEM | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_LITTLESUR | |
| bool "Support for Sibyte BCM91250C2-LittleSur" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_SB1250 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_HIGHMEM | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_CRHINE | |
| bool "Support for Sibyte BCM91120C-CRhine" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_BCM1120 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SIBYTE_CRHONE | |
| bool "Support for Sibyte BCM91125C-CRhone" | |
| depends on EXPERIMENTAL | |
| select BOOT_ELF32 | |
| select DMA_COHERENT | |
| select SIBYTE_BCM1125 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_SB1 | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select SYS_SUPPORTS_HIGHMEM | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| config SNI_RM200_PCI | |
| bool "Support for SNI RM200 PCI" | |
| select ARC | |
| select ARC32 | |
| select ARCH_MAY_HAVE_PC_FDC | |
| select BOOT_ELF32 | |
| select DMA_NONCOHERENT | |
| select GENERIC_ISA_DMA | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select HW_HAS_EISA | |
| select HW_HAS_PCI | |
| select I8253 | |
| select I8259 | |
| select ISA | |
| select SYS_HAS_CPU_R4X00 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
| select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL | |
| select SYS_SUPPORTS_HIGHMEM | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens | |
| Nixdorf Informationssysteme (SNI), parent company of Pyramid | |
| Technology and now in turn merged with Fujitsu. Say Y here to | |
| support this machine type. | |
| config TOSHIBA_JMR3927 | |
| bool "Support for Toshiba JMR-TX3927 board" | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select MIPS_TX3927 | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_TX39XX | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select TOSHIBA_BOARDS | |
| config TOSHIBA_RBTX4927 | |
| bool "Support for Toshiba TBTX49[23]7 board" | |
| select DMA_NONCOHERENT | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select I8259 | |
| select ISA | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_TX49XX | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select TOSHIBA_BOARDS | |
| help | |
| This Toshiba board is based on the TX4927 processor. Say Y here to | |
| support this machine type | |
| config TOSHIBA_RBTX4938 | |
| bool "Support for Toshiba RBTX4938 board" | |
| select HAVE_STD_PC_SERIAL_PORT | |
| select DMA_NONCOHERENT | |
| select GENERIC_ISA_DMA | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select I8259 | |
| select ISA | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_CPU_TX49XX | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select TOSHIBA_BOARDS | |
| help | |
| This Toshiba board is based on the TX4938 processor. Say Y here to | |
| support this machine type | |
| endchoice | |
| source "arch/mips/ddb5xxx/Kconfig" | |
| source "arch/mips/gt64120/ev64120/Kconfig" | |
| source "arch/mips/jazz/Kconfig" | |
| source "arch/mips/ite-boards/Kconfig" | |
| source "arch/mips/lasat/Kconfig" | |
| source "arch/mips/momentum/Kconfig" | |
| source "arch/mips/pmc-sierra/Kconfig" | |
| source "arch/mips/sgi-ip27/Kconfig" | |
| source "arch/mips/sibyte/Kconfig" | |
| source "arch/mips/tx4927/Kconfig" | |
| source "arch/mips/tx4938/Kconfig" | |
| source "arch/mips/vr41xx/Kconfig" | |
| source "arch/mips/philips/pnx8550/common/Kconfig" | |
| source "arch/mips/cobalt/Kconfig" | |
| endmenu | |
| config RWSEM_GENERIC_SPINLOCK | |
| bool | |
| default y | |
| config RWSEM_XCHGADD_ALGORITHM | |
| bool | |
| config GENERIC_FIND_NEXT_BIT | |
| bool | |
| default y | |
| config GENERIC_HWEIGHT | |
| bool | |
| default y | |
| config GENERIC_CALIBRATE_DELAY | |
| bool | |
| default y | |
| config SCHED_NO_NO_OMIT_FRAME_POINTER | |
| bool | |
| default y | |
| # | |
| # Select some configuration options automatically based on user selections. | |
| # | |
| config ARC | |
| bool | |
| config ARCH_MAY_HAVE_PC_FDC | |
| bool | |
| config DMA_COHERENT | |
| bool | |
| config DMA_IP27 | |
| bool | |
| config DMA_IP32 | |
| bool | |
| select DMA_NEED_PCI_MAP_STATE | |
| config DMA_NONCOHERENT | |
| bool | |
| select DMA_NEED_PCI_MAP_STATE | |
| config DMA_NEED_PCI_MAP_STATE | |
| bool | |
| config OWN_DMA | |
| bool | |
| config EARLY_PRINTK | |
| bool | |
| config GENERIC_ISA_DMA | |
| bool | |
| config I8259 | |
| bool | |
| config LIMITED_DMA | |
| bool | |
| select HIGHMEM | |
| select SYS_SUPPORTS_HIGHMEM | |
| config MIPS_BONITO64 | |
| bool | |
| config MIPS_MSC | |
| bool | |
| config MIPS_NILE4 | |
| bool | |
| config MIPS_DISABLE_OBSOLETE_IDE | |
| bool | |
| # | |
| # Endianess selection. Suffiently obscure so many users don't know what to | |
| # answer,so we try hard to limit the available choices. Also the use of a | |
| # choice statement should be more obvious to the user. | |
| # | |
| choice | |
| prompt "Endianess selection" | |
| help | |
| Some MIPS machines can be configured for either little or big endian | |
| byte order. These modes require different kernels and a different | |
| Linux distribution. In general there is one prefered byteorder for a | |
| particular system but some systems are just as commonly used in the | |
| one or the other endianess. | |
| config CPU_BIG_ENDIAN | |
| bool "Big endian" | |
| depends on SYS_SUPPORTS_BIG_ENDIAN | |
| config CPU_LITTLE_ENDIAN | |
| bool "Little endian" | |
| depends on SYS_SUPPORTS_LITTLE_ENDIAN | |
| help | |
| endchoice | |
| config SYS_SUPPORTS_BIG_ENDIAN | |
| bool | |
| config SYS_SUPPORTS_LITTLE_ENDIAN | |
| bool | |
| config IRQ_CPU | |
| bool | |
| config IRQ_CPU_RM7K | |
| bool | |
| config IRQ_CPU_RM9K | |
| bool | |
| config IRQ_MV64340 | |
| bool | |
| config DDB5XXX_COMMON | |
| bool | |
| config MIPS_BOARDS_GEN | |
| bool | |
| config MIPS_GT64111 | |
| bool | |
| config MIPS_GT64120 | |
| bool | |
| config MIPS_TX3927 | |
| bool | |
| select HAS_TXX9_SERIAL | |
| config PCI_MARVELL | |
| bool | |
| config ITE_BOARD_GEN | |
| bool | |
| config SOC_AU1000 | |
| bool | |
| select SOC_AU1X00 | |
| config SOC_AU1100 | |
| bool | |
| select SOC_AU1X00 | |
| config SOC_AU1500 | |
| bool | |
| select SOC_AU1X00 | |
| config SOC_AU1550 | |
| bool | |
| select SOC_AU1X00 | |
| config SOC_AU1200 | |
| bool | |
| select SOC_AU1X00 | |
| config SOC_AU1X00 | |
| bool | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| config PNX8550 | |
| bool | |
| select SOC_PNX8550 | |
| config SOC_PNX8550 | |
| bool | |
| select DMA_NONCOHERENT | |
| select HW_HAS_PCI | |
| select SYS_HAS_CPU_MIPS32_R1 | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| config SWAP_IO_SPACE | |
| bool | |
| # | |
| # Unfortunately not all GT64120 systems run the chip at the same clock. | |
| # As the user for the clock rate and try to minimize the available options. | |
| # | |
| choice | |
| prompt "Galileo Chip Clock" | |
| #default SYSCLK_83 if MIPS_EV64120 | |
| depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
| default SYSCLK_83 if MIPS_EV64120 | |
| default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
| config SYSCLK_75 | |
| bool "75" if MIPS_EV64120 | |
| config SYSCLK_83 | |
| bool "83.3" if MIPS_EV64120 | |
| config SYSCLK_100 | |
| bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
| endchoice | |
| config ARC32 | |
| bool | |
| config AU1X00_USB_DEVICE | |
| bool | |
| depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 | |
| default n | |
| config MIPS_GT96100 | |
| bool | |
| select MIPS_GT64120 | |
| config IT8172_CIR | |
| bool | |
| depends on MIPS_ITE8172 || MIPS_IVR | |
| default y | |
| config IT8712 | |
| bool | |
| depends on MIPS_ITE8172 | |
| default y | |
| config BOOT_ELF32 | |
| bool | |
| config MIPS_L1_CACHE_SHIFT | |
| int | |
| default "4" if MACH_DECSTATION | |
| default "7" if SGI_IP27 | |
| default "5" | |
| config HAVE_STD_PC_SERIAL_PORT | |
| bool | |
| config ARC_CONSOLE | |
| bool "ARC console support" | |
| depends on SGI_IP22 || SNI_RM200_PCI | |
| config ARC_MEMORY | |
| bool | |
| depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 | |
| default y | |
| config ARC_PROMLIB | |
| bool | |
| depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 | |
| default y | |
| config ARC64 | |
| bool | |
| config BOOT_ELF64 | |
| bool | |
| config TOSHIBA_BOARDS | |
| bool | |
| menu "CPU selection" | |
| choice | |
| prompt "CPU type" | |
| default CPU_R4X00 | |
| config CPU_MIPS32_R1 | |
| bool "MIPS32 Release 1" | |
| depends on SYS_HAS_CPU_MIPS32_R1 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| Choose this option to build a kernel for release 1 or later of the | |
| MIPS32 architecture. Most modern embedded systems with a 32-bit | |
| MIPS processor are based on a MIPS32 processor. If you know the | |
| specific type of processor in your system, choose those that one | |
| otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
| Release 2 of the MIPS32 architecture is available since several | |
| years so chances are you even have a MIPS32 Release 2 processor | |
| in which case you should choose CPU_MIPS32_R2 instead for better | |
| performance. | |
| config CPU_MIPS32_R2 | |
| bool "MIPS32 Release 2" | |
| depends on SYS_HAS_CPU_MIPS32_R2 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| Choose this option to build a kernel for release 2 or later of the | |
| MIPS32 architecture. Most modern embedded systems with a 32-bit | |
| MIPS processor are based on a MIPS32 processor. If you know the | |
| specific type of processor in your system, choose those that one | |
| otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
| config CPU_MIPS64_R1 | |
| bool "MIPS64 Release 1" | |
| depends on SYS_HAS_CPU_MIPS64_R1 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| Choose this option to build a kernel for release 1 or later of the | |
| MIPS64 architecture. Many modern embedded systems with a 64-bit | |
| MIPS processor are based on a MIPS64 processor. If you know the | |
| specific type of processor in your system, choose those that one | |
| otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
| Release 2 of the MIPS64 architecture is available since several | |
| years so chances are you even have a MIPS64 Release 2 processor | |
| in which case you should choose CPU_MIPS64_R2 instead for better | |
| performance. | |
| config CPU_MIPS64_R2 | |
| bool "MIPS64 Release 2" | |
| depends on SYS_HAS_CPU_MIPS64_R2 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| Choose this option to build a kernel for release 2 or later of the | |
| MIPS64 architecture. Many modern embedded systems with a 64-bit | |
| MIPS processor are based on a MIPS64 processor. If you know the | |
| specific type of processor in your system, choose those that one | |
| otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
| config CPU_R3000 | |
| bool "R3000" | |
| depends on SYS_HAS_CPU_R3000 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| Please make sure to pick the right CPU type. Linux/MIPS is not | |
| designed to be generic, i.e. Kernels compiled for R3000 CPUs will | |
| *not* work on R4000 machines and vice versa. However, since most | |
| of the supported machines have an R4000 (or similar) CPU, R4x00 | |
| might be a safe bet. If the resulting kernel does not work, | |
| try to recompile with R3000. | |
| config CPU_TX39XX | |
| bool "R39XX" | |
| depends on SYS_HAS_CPU_TX39XX | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| config CPU_VR41XX | |
| bool "R41xx" | |
| depends on SYS_HAS_CPU_VR41XX | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| The options selects support for the NEC VR4100 series of processors. | |
| Only choose this option if you have one of these processors as a | |
| kernel built with this option will not run on any other type of | |
| processor or vice versa. | |
| config CPU_R4300 | |
| bool "R4300" | |
| depends on SYS_HAS_CPU_R4300 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| MIPS Technologies R4300-series processors. | |
| config CPU_R4X00 | |
| bool "R4x00" | |
| depends on SYS_HAS_CPU_R4X00 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| MIPS Technologies R4000-series processors other than 4300, including | |
| the R4000, R4400, R4600, and 4700. | |
| config CPU_TX49XX | |
| bool "R49XX" | |
| depends on SYS_HAS_CPU_TX49XX | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| config CPU_R5000 | |
| bool "R5000" | |
| depends on SYS_HAS_CPU_R5000 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| MIPS Technologies R5000-series processors other than the Nevada. | |
| config CPU_R5432 | |
| bool "R5432" | |
| depends on SYS_HAS_CPU_R5432 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| config CPU_R6000 | |
| bool "R6000" | |
| depends on EXPERIMENTAL | |
| depends on SYS_HAS_CPU_R6000 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| help | |
| MIPS Technologies R6000 and R6000A series processors. Note these | |
| processors are extremly rare and the support for them is incomplete. | |
| config CPU_NEVADA | |
| bool "RM52xx" | |
| depends on SYS_HAS_CPU_NEVADA | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| QED / PMC-Sierra RM52xx-series ("Nevada") processors. | |
| config CPU_R8000 | |
| bool "R8000" | |
| depends on EXPERIMENTAL | |
| depends on SYS_HAS_CPU_R8000 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| help | |
| MIPS Technologies R8000 processors. Note these processors are | |
| uncommon and the support for them is incomplete. | |
| config CPU_R10000 | |
| bool "R10000" | |
| depends on SYS_HAS_CPU_R10000 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| help | |
| MIPS Technologies R10000-series processors. | |
| config CPU_RM7000 | |
| bool "RM7000" | |
| depends on SYS_HAS_CPU_RM7000 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| config CPU_RM9000 | |
| bool "RM9000" | |
| depends on SYS_HAS_CPU_RM9000 | |
| select CPU_HAS_PREFETCH | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| config CPU_SB1 | |
| bool "SB1" | |
| depends on SYS_HAS_CPU_SB1 | |
| select CPU_SUPPORTS_32BIT_KERNEL | |
| select CPU_SUPPORTS_64BIT_KERNEL | |
| select CPU_SUPPORTS_HIGHMEM | |
| endchoice | |
| config SYS_HAS_CPU_MIPS32_R1 | |
| bool | |
| config SYS_HAS_CPU_MIPS32_R2 | |
| bool | |
| config SYS_HAS_CPU_MIPS64_R1 | |
| bool | |
| config SYS_HAS_CPU_MIPS64_R2 | |
| bool | |
| config SYS_HAS_CPU_R3000 | |
| bool | |
| config SYS_HAS_CPU_TX39XX | |
| bool | |
| config SYS_HAS_CPU_VR41XX | |
| bool | |
| config SYS_HAS_CPU_R4300 | |
| bool | |
| config SYS_HAS_CPU_R4X00 | |
| bool | |
| config SYS_HAS_CPU_TX49XX | |
| bool | |
| config SYS_HAS_CPU_R5000 | |
| bool | |
| config SYS_HAS_CPU_R5432 | |
| bool | |
| config SYS_HAS_CPU_R6000 | |
| bool | |
| config SYS_HAS_CPU_NEVADA | |
| bool | |
| config SYS_HAS_CPU_R8000 | |
| bool | |
| config SYS_HAS_CPU_R10000 | |
| bool | |
| config SYS_HAS_CPU_RM7000 | |
| bool | |
| config SYS_HAS_CPU_RM9000 | |
| bool | |
| config SYS_HAS_CPU_SB1 | |
| bool | |
| endmenu | |
| # | |
| # These two indicate any levelof the MIPS32 and MIPS64 architecture | |
| # | |
| config CPU_MIPS32 | |
| bool | |
| default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 | |
| config CPU_MIPS64 | |
| bool | |
| default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 | |
| # | |
| # These two indicate the revision of the architecture, either 32 bot 64 bit. | |
| # | |
| config CPU_MIPSR1 | |
| bool | |
| default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 | |
| config CPU_MIPSR2 | |
| bool | |
| default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 | |
| config SYS_SUPPORTS_32BIT_KERNEL | |
| bool | |
| config SYS_SUPPORTS_64BIT_KERNEL | |
| bool | |
| config CPU_SUPPORTS_32BIT_KERNEL | |
| bool | |
| config CPU_SUPPORTS_64BIT_KERNEL | |
| bool | |
| menu "Kernel type" | |
| choice | |
| prompt "Kernel code model" | |
| help | |
| You should only select this option if you have a workload that | |
| actually benefits from 64-bit processing or if your machine has | |
| large memory. You will only be presented a single option in this | |
| menu if your system does not support both 32-bit and 64-bit kernels. | |
| config 32BIT | |
| bool "32-bit kernel" | |
| depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL | |
| select TRAD_SIGNALS | |
| help | |
| Select this option if you want to build a 32-bit kernel. | |
| config 64BIT | |
| bool "64-bit kernel" | |
| depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL | |
| help | |
| Select this option if you want to build a 64-bit kernel. | |
| endchoice | |
| choice | |
| prompt "Kernel page size" | |
| default PAGE_SIZE_4KB | |
| config PAGE_SIZE_4KB | |
| bool "4kB" | |
| help | |
| This option select the standard 4kB Linux page size. On some | |
| R3000-family processors this is the only available page size. Using | |
| 4kB page size will minimize memory consumption and is therefore | |
| recommended for low memory systems. | |
| config PAGE_SIZE_8KB | |
| bool "8kB" | |
| depends on EXPERIMENTAL && CPU_R8000 | |
| help | |
| Using 8kB page size will result in higher performance kernel at | |
| the price of higher memory consumption. This option is available | |
| only on the R8000 processor. Not that at the time of this writing | |
| this option is still high experimental; there are also issues with | |
| compatibility of user applications. | |
| config PAGE_SIZE_16KB | |
| bool "16kB" | |
| depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX | |
| help | |
| Using 16kB page size will result in higher performance kernel at | |
| the price of higher memory consumption. This option is available on | |
| all non-R3000 family processor. Not that at the time of this | |
| writing this option is still high experimental; there are also | |
| issues with compatibility of user applications. | |
| config PAGE_SIZE_64KB | |
| bool "64kB" | |
| depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX | |
| help | |
| Using 64kB page size will result in higher performance kernel at | |
| the price of higher memory consumption. This option is available on | |
| all non-R3000 family processor. Not that at the time of this | |
| writing this option is still high experimental; there are also | |
| issues with compatibility of user applications. | |
| endchoice | |
| config BOARD_SCACHE | |
| bool | |
| config IP22_CPU_SCACHE | |
| bool | |
| select BOARD_SCACHE | |
| config R5000_CPU_SCACHE | |
| bool | |
| select BOARD_SCACHE | |
| config RM7000_CPU_SCACHE | |
| bool | |
| select BOARD_SCACHE | |
| config SIBYTE_DMA_PAGEOPS | |
| bool "Use DMA to clear/copy pages" | |
| depends on CPU_SB1 | |
| help | |
| Instead of using the CPU to zero and copy pages, use a Data Mover | |
| channel. These DMA channels are otherwise unused by the standard | |
| SiByte Linux port. Seems to give a small performance benefit. | |
| config CPU_HAS_PREFETCH | |
| bool | |
| config MIPS_MT | |
| bool "Enable MIPS MT" | |
| choice | |
| prompt "MIPS MT options" | |
| depends on MIPS_MT | |
| config MIPS_MT_SMTC | |
| bool "SMTC: Use all TCs on all VPEs for SMP" | |
| select SMP | |
| config MIPS_MT_SMP | |
| bool "Use 1 TC on each available VPE for SMP" | |
| select SMP | |
| config MIPS_VPE_LOADER | |
| bool "VPE loader support." | |
| depends on MIPS_MT | |
| help | |
| Includes a loader for loading an elf relocatable object | |
| onto another VPE and running it. | |
| endchoice | |
| config MIPS_MT_FPAFF | |
| bool "Dynamic FPU affinity for FP-intensive threads" | |
| depends on MIPS_MT | |
| default y | |
| config MIPS_VPE_LOADER_TOM | |
| bool "Load VPE program into memory hidden from linux" | |
| depends on MIPS_VPE_LOADER | |
| default y | |
| help | |
| The loader can use memory that is present but has been hidden from | |
| Linux using the kernel command line option "mem=xxMB". It's up to | |
| you to ensure the amount you put in the option and the space your | |
| program requires is less or equal to the amount physically present. | |
| # this should possibly be in drivers/char, but it is rather cpu related. Hmmm | |
| config MIPS_VPE_APSP_API | |
| bool "Enable support for AP/SP API (RTLX)" | |
| depends on MIPS_VPE_LOADER | |
| help | |
| config MIPS_APSP_KSPD | |
| bool "Enable KSPD" | |
| depends on MIPS_VPE_APSP_API | |
| default y | |
| help | |
| KSPD is a kernel daemon that accepts syscall requests from the SP | |
| side, actions them and returns the results. It also handles the | |
| "exit" syscall notifying other kernel modules the SP program is | |
| exiting. You probably want to say yes here. | |
| config SB1_PASS_1_WORKAROUNDS | |
| bool | |
| depends on CPU_SB1_PASS_1 | |
| default y | |
| config SB1_PASS_2_WORKAROUNDS | |
| bool | |
| depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) | |
| default y | |
| config SB1_PASS_2_1_WORKAROUNDS | |
| bool | |
| depends on CPU_SB1 && CPU_SB1_PASS_2 | |
| default y | |
| config 64BIT_PHYS_ADDR | |
| bool "Support for 64-bit physical address space" | |
| depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT | |
| config CPU_ADVANCED | |
| bool "Override CPU Options" | |
| depends on 32BIT | |
| help | |
| Saying yes here allows you to select support for various features | |
| your CPU may or may not have. Most people should say N here. | |
| config CPU_HAS_LLSC | |
| bool "ll/sc Instructions available" if CPU_ADVANCED | |
| default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX | |
| help | |
| MIPS R4000 series and later provide the Load Linked (ll) | |
| and Store Conditional (sc) instructions. More information is | |
| available at <http://www.go-ecs.com/mips/miptek1.htm>. | |
| Say Y here if your CPU has the ll and sc instructions. Say Y here | |
| for better performance, N if you don't know. You must say Y here | |
| for multiprocessor machines. | |
| config CPU_HAS_WB | |
| bool "Writeback Buffer available" if CPU_ADVANCED | |
| default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION | |
| help | |
| Say N here for slightly better performance. You must say Y here for | |
| machines which require flushing of write buffers in software. Saying | |
| Y is the safe option; N may result in kernel malfunction and crashes. | |
| menu "MIPSR2 Interrupt handling" | |
| depends on CPU_MIPSR2 && CPU_ADVANCED | |
| config CPU_MIPSR2_IRQ_VI | |
| bool "Vectored interrupt mode" | |
| help | |
| Vectored interrupt mode allowing faster dispatching of interrupts. | |
| The board support code needs to be written to take advantage of this | |
| mode. Compatibility code is included to allow the kernel to run on | |
| a CPU that does not support vectored interrupts. It's safe to | |
| say Y here. | |
| config CPU_MIPSR2_IRQ_EI | |
| bool "External interrupt controller mode" | |
| help | |
| Extended interrupt mode takes advantage of an external interrupt | |
| controller to allow fast dispatching from many possible interrupt | |
| sources. Say N unless you know that external interrupt support is | |
| required. | |
| config CPU_MIPSR2_SRS | |
| bool "Make shadow set registers available for interrupt handlers" | |
| depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI | |
| help | |
| Allow the kernel to use shadow register sets for fast interrupts. | |
| Interrupt handlers must be specially written to use shadow sets. | |
| Say N unless you know that shadow register set upport is needed. | |
| endmenu | |
| config CPU_HAS_SYNC | |
| bool | |
| depends on !CPU_R3000 | |
| default y | |
| # | |
| # Use the generic interrupt handling code in kernel/irq/: | |
| # | |
| config GENERIC_HARDIRQS | |
| bool | |
| default y | |
| config GENERIC_IRQ_PROBE | |
| bool | |
| default y | |
| # | |
| # - Highmem only makes sense for the 32-bit kernel. | |
| # - The current highmem code will only work properly on physically indexed | |
| # caches such as R3000, SB1, R7000 or those that look like they're virtually | |
| # indexed such as R4000/R4400 SC and MC versions or R10000. So for the | |
| # moment we protect the user and offer the highmem option only on machines | |
| # where it's known to be safe. This will not offer highmem on a few systems | |
| # such as MIPS32 and MIPS64 CPUs which may have virtual and physically | |
| # indexed CPUs but we're playing safe. | |
| # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we | |
| # know they might have memory configurations that could make use of highmem | |
| # support. | |
| # | |
| config HIGHMEM | |
| bool "High Memory Support" | |
| depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM | |
| config CPU_SUPPORTS_HIGHMEM | |
| bool | |
| config SYS_SUPPORTS_HIGHMEM | |
| bool | |
| config ARCH_FLATMEM_ENABLE | |
| def_bool y | |
| depends on !NUMA | |
| config NODES_SHIFT | |
| int | |
| default "6" | |
| depends on NEED_MULTIPLE_NODES | |
| source "mm/Kconfig" | |
| config SMP | |
| bool "Multi-Processing support" | |
| depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC | |
| ---help--- | |
| This enables support for systems with more than one CPU. If you have | |
| a system with only one CPU, like most personal computers, say N. If | |
| you have a system with more than one CPU, say Y. | |
| If you say N here, the kernel will run on single and multiprocessor | |
| machines, but will use only one CPU of a multiprocessor machine. If | |
| you say Y here, the kernel will run on many, but not all, | |
| singleprocessor machines. On a singleprocessor machine, the kernel | |
| will run faster if you say N here. | |
| People using multiprocessor machines who say Y here should also say | |
| Y to "Enhanced Real Time Clock Support", below. | |
| See also the <file:Documentation/smp.txt> and the SMP-HOWTO | |
| available at <http://www.tldp.org/docs.html#howto>. | |
| If you don't know what to do here, say N. | |
| config NR_CPUS | |
| int "Maximum number of CPUs (2-64)" | |
| range 2 64 | |
| depends on SMP | |
| default "64" if SGI_IP27 | |
| default "2" | |
| help | |
| This allows you to specify the maximum number of CPUs which this | |
| kernel will support. The maximum supported value is 32 for 32-bit | |
| kernel and 64 for 64-bit kernels; the minimum value which makes | |
| sense is 2. | |
| This is purely to save memory - each supported CPU adds | |
| approximately eight kilobytes to the kernel image. | |
| source "kernel/Kconfig.preempt" | |
| config RTC_DS1742 | |
| bool "DS1742 BRAM/RTC support" | |
| depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 | |
| config MIPS_INSANE_LARGE | |
| bool "Support for large 64-bit configurations" | |
| depends on CPU_R10000 && 64BIT | |
| help | |
| MIPS R10000 does support a 44 bit / 16TB address space as opposed to | |
| previous 64-bit processors which only supported 40 bit / 1TB. If you | |
| need processes of more than 1TB virtual address space, say Y here. | |
| This will result in additional memory usage, so it is not | |
| recommended for normal users. | |
| endmenu | |
| config RWSEM_GENERIC_SPINLOCK | |
| bool | |
| default y | |
| source "init/Kconfig" | |
| menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" | |
| config HW_HAS_EISA | |
| bool | |
| config HW_HAS_PCI | |
| bool | |
| config PCI | |
| bool "Support for PCI controller" | |
| depends on HW_HAS_PCI | |
| help | |
| Find out whether you have a PCI motherboard. PCI is the name of a | |
| bus system, i.e. the way the CPU talks to the other stuff inside | |
| your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, | |
| say Y, otherwise N. | |
| The PCI-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>, contains valuable | |
| information about which PCI hardware does work under Linux and which | |
| doesn't. | |
| config PCI_DOMAINS | |
| bool | |
| depends on PCI | |
| source "drivers/pci/Kconfig" | |
| # | |
| # ISA support is now enabled via select. Too many systems still have the one | |
| # or other ISA chip on the board that users don't know about so don't expect | |
| # users to choose the right thing ... | |
| # | |
| config ISA | |
| bool | |
| config EISA | |
| bool "EISA support" | |
| depends on HW_HAS_EISA | |
| select ISA | |
| ---help--- | |
| The Extended Industry Standard Architecture (EISA) bus was | |
| developed as an open alternative to the IBM MicroChannel bus. | |
| The EISA bus provided some of the features of the IBM MicroChannel | |
| bus while maintaining backward compatibility with cards made for | |
| the older ISA bus. The EISA bus saw limited use between 1988 and | |
| 1995 when it was made obsolete by the PCI bus. | |
| Say Y here if you are building a kernel for an EISA-based machine. | |
| Otherwise, say N. | |
| source "drivers/eisa/Kconfig" | |
| config TC | |
| bool "TURBOchannel support" | |
| depends on MACH_DECSTATION | |
| help | |
| TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS | |
| processors. Documentation on writing device drivers for TurboChannel | |
| is available at: | |
| <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. | |
| #config ACCESSBUS | |
| # bool "Access.Bus support" | |
| # depends on TC | |
| config MMU | |
| bool | |
| default y | |
| config I8253 | |
| bool | |
| source "drivers/pcmcia/Kconfig" | |
| source "drivers/pci/hotplug/Kconfig" | |
| endmenu | |
| menu "Executable file formats" | |
| source "fs/Kconfig.binfmt" | |
| config TRAD_SIGNALS | |
| bool | |
| config BUILD_ELF64 | |
| bool "Use 64-bit ELF format for building" | |
| depends on 64BIT | |
| help | |
| A 64-bit kernel is usually built using the 64-bit ELF binary object | |
| format as it's one that allows arbitrary 64-bit constructs. For | |
| kernels that are loaded within the KSEG compatibility segments the | |
| 32-bit ELF format can optionally be used resulting in a somewhat | |
| smaller binary, but this option is not explicitly supported by the | |
| toolchain and since binutils 2.14 it does not even work at all. | |
| Say Y to use the 64-bit format or N to use the 32-bit one. | |
| If unsure say Y. | |
| config BINFMT_IRIX | |
| bool "Include IRIX binary compatibility" | |
| depends on CPU_BIG_ENDIAN && 32BIT && BROKEN | |
| config MIPS32_COMPAT | |
| bool "Kernel support for Linux/MIPS 32-bit binary compatibility" | |
| depends on 64BIT | |
| help | |
| Select this option if you want Linux/MIPS 32-bit binary | |
| compatibility. Since all software available for Linux/MIPS is | |
| currently 32-bit you should say Y here. | |
| config COMPAT | |
| bool | |
| depends on MIPS32_COMPAT | |
| default y | |
| config MIPS32_O32 | |
| bool "Kernel support for o32 binaries" | |
| depends on MIPS32_COMPAT | |
| help | |
| Select this option if you want to run o32 binaries. These are pure | |
| 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of | |
| existing binaries are in this format. | |
| If unsure, say Y. | |
| config MIPS32_N32 | |
| bool "Kernel support for n32 binaries" | |
| depends on MIPS32_COMPAT | |
| help | |
| Select this option if you want to run n32 binaries. These are | |
| 64-bit binaries using 32-bit quantities for addressing and certain | |
| data that would normally be 64-bit. They are used in special | |
| cases. | |
| If unsure, say N. | |
| config BINFMT_ELF32 | |
| bool | |
| default y if MIPS32_O32 || MIPS32_N32 | |
| config SECCOMP | |
| bool "Enable seccomp to safely compute untrusted bytecode" | |
| depends on PROC_FS && BROKEN | |
| default y | |
| help | |
| This kernel feature is useful for number crunching applications | |
| that may need to compute untrusted bytecode during their | |
| execution. By using pipes or other transports made available to | |
| the process as file descriptors supporting the read/write | |
| syscalls, it's possible to isolate those applications in | |
| their own address space using seccomp. Once seccomp is | |
| enabled via /proc/<pid>/seccomp, it cannot be disabled | |
| and the task is only allowed to execute a few safe syscalls | |
| defined by each seccomp mode. | |
| If unsure, say Y. Only embedded should say N here. | |
| config PM | |
| bool "Power Management support (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL && SOC_AU1X00 | |
| endmenu | |
| source "net/Kconfig" | |
| source "drivers/Kconfig" | |
| source "fs/Kconfig" | |
| source "arch/mips/oprofile/Kconfig" | |
| source "arch/mips/Kconfig.debug" | |
| source "security/Kconfig" | |
| source "crypto/Kconfig" | |
| source "lib/Kconfig" |