Added base sphinx configuration
Ran sphinx-quickstart to generate base sphinx configuration files. Also
updated documentation on how to build documentation and added a
gitignore.
Change-Id: I5f1cdfb0411d9195c822a6e565c8ddeaa9ff8df6
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..69fa449
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+_build/
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..5e6f363
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS =
+SPHINXBUILD = sphinx-build
+SPHINXPROJ = KUnit
+SOURCEDIR = .
+BUILDDIR = _build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+ @$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option. $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+ @$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
\ No newline at end of file
diff --git a/README.md b/README.md
index d312ba5..a6a785a 100644
--- a/README.md
+++ b/README.md
@@ -26,3 +26,11 @@
<https://kunit.googlesource.com>
+## How to build documentation
+
+Documentation can be built by running:
+
+```bash
+make html
+```
+
diff --git a/conf.py b/conf.py
new file mode 100644
index 0000000..a6c8a1a
--- /dev/null
+++ b/conf.py
@@ -0,0 +1,174 @@
+# Copyright 2019 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# -*- coding: utf-8 -*-
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'KUnit'
+copyright = '2019, Brendan Higgins'
+author = 'Brendan Higgins'
+
+# The short X.Y version
+version = ''
+# The full version, including alpha/beta/rc tags
+release = ''
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+ 'sphinx.ext.githubpages',
+ 'sphinx_rtd_theme',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path .
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages. See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'sphinx_rtd_theme'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further. For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself. Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'KUnitdoc'
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+ # The paper size ('letterpaper' or 'a4paper').
+ #
+ # 'papersize': 'letterpaper',
+
+ # The font size ('10pt', '11pt' or '12pt').
+ #
+ # 'pointsize': '10pt',
+
+ # Additional stuff for the LaTeX preamble.
+ #
+ # 'preamble': '',
+
+ # Latex figure (float) alignment
+ #
+ # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+# author, documentclass [howto, manual, or own class]).
+latex_documents = [
+ (master_doc, 'KUnit.tex', 'KUnit Documentation',
+ 'Brendan Higgins', 'manual'),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+ (master_doc, 'kunit', 'KUnit Documentation',
+ [author], 1)
+]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+# dir menu entry, description, category)
+texinfo_documents = [
+ (master_doc, 'KUnit', 'KUnit Documentation',
+ author, 'KUnit', 'One line description of project.',
+ 'Miscellaneous'),
+]
+
+
+# -- Extension configuration -------------------------------------------------
diff --git a/index.rst b/index.rst
new file mode 100644
index 0000000..38f8933
--- /dev/null
+++ b/index.rst
@@ -0,0 +1,20 @@
+.. KUnit documentation master file, created by
+ sphinx-quickstart on Mon Aug 26 16:07:42 2019.
+ You can adapt this file completely to your liking, but it should at least
+ contain the root `toctree` directive.
+
+Welcome to KUnit's documentation!
+=================================
+
+.. toctree::
+ :maxdepth: 2
+ :caption: Contents:
+
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`