# SPDX-License-Identifier: GPL-2.0

menu "DesignWare PCI Core Support"
	depends on PCI

config PCIE_DW
	bool

config PCIE_DW_HOST
        bool
	depends on PCI_MSI_IRQ_DOMAIN
        select PCIE_DW

config PCIE_DW_EP
	bool
	depends on PCI_ENDPOINT
	select PCIE_DW

config PCI_DRA7XX
	bool

config PCI_DRA7XX_HOST
	bool "TI DRA7xx PCIe controller Host Mode"
	depends on SOC_DRA7XX || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	depends on OF && HAS_IOMEM && TI_PIPE3
	select PCIE_DW_HOST
	select PCI_DRA7XX
	default y
	help
	  Enables support for the PCIe controller in the DRA7xx SoC to work in
	  host mode. There are two instances of PCIe controller in DRA7xx.
	  This controller can work either as EP or RC. In order to enable
	  host-specific features PCI_DRA7XX_HOST must be selected and in order
	  to enable device-specific features PCI_DRA7XX_EP must be selected.
	  This uses the DesignWare core.

config PCI_DRA7XX_EP
	bool "TI DRA7xx PCIe controller Endpoint Mode"
	depends on SOC_DRA7XX || COMPILE_TEST
	depends on PCI_ENDPOINT
	depends on OF && HAS_IOMEM && TI_PIPE3
	select PCIE_DW_EP
	select PCI_DRA7XX
	help
	  Enables support for the PCIe controller in the DRA7xx SoC to work in
	  endpoint mode. There are two instances of PCIe controller in DRA7xx.
	  This controller can work either as EP or RC. In order to enable
	  host-specific features PCI_DRA7XX_HOST must be selected and in order
	  to enable device-specific features PCI_DRA7XX_EP must be selected.
	  This uses the DesignWare core.

config PCIE_DW_PLAT
	bool

config PCIE_DW_PLAT_HOST
	bool "Platform bus based DesignWare PCIe Controller - Host mode"
	depends on PCI && PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	select PCIE_DW_PLAT
	help
	  Enables support for the PCIe controller in the Designware IP to
	  work in host mode. There are two instances of PCIe controller in
	  Designware IP.
	  This controller can work either as EP or RC. In order to enable
	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
	  order to enable device-specific features PCI_DW_PLAT_EP must be
	  selected.

config PCIE_DW_PLAT_EP
	bool "Platform bus based DesignWare PCIe Controller - Endpoint mode"
	depends on PCI && PCI_MSI_IRQ_DOMAIN
	depends on PCI_ENDPOINT
	select PCIE_DW_EP
	select PCIE_DW_PLAT
	help
	  Enables support for the PCIe controller in the Designware IP to
	  work in endpoint mode. There are two instances of PCIe controller
	  in Designware IP.
	  This controller can work either as EP or RC. In order to enable
	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
	  order to enable device-specific features PCI_DW_PLAT_EP must be
	  selected.

config PCI_EXYNOS
	bool "Samsung Exynos PCIe controller"
	depends on SOC_EXYNOS5440 || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST

config PCI_IMX6
	bool "Freescale i.MX6/7/8 PCIe controller"
	depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST

config PCIE_SPEAR13XX
	bool "STMicroelectronics SPEAr PCIe controller"
	depends on ARCH_SPEAR13XX || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here if you want PCIe support on SPEAr13XX SoCs.

config PCI_KEYSTONE
	bool

config PCI_KEYSTONE_HOST
	bool "PCI Keystone Host Mode"
	depends on ARCH_KEYSTONE || ARCH_K3 || ((ARM || ARM64) && COMPILE_TEST)
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	select PCI_KEYSTONE
	default y
	help
	  Enables support for the PCIe controller in the Keystone SoC to
	  work in host mode. The PCI controller on Keystone is based on
	  DesignWare hardware and therefore the driver re-uses the
	  DesignWare core functions to implement the driver.

config PCI_KEYSTONE_EP
	bool "PCI Keystone Endpoint Mode"
	depends on ARCH_KEYSTONE || ARCH_K3 || ((ARM || ARM64) && COMPILE_TEST)
	depends on PCI_ENDPOINT
	select PCIE_DW_EP
	select PCI_KEYSTONE
	help
	  Enables support for the PCIe controller in the Keystone SoC to
	  work in endpoint mode. The PCI controller on Keystone is based
	  on DesignWare hardware and therefore the driver re-uses the
	  DesignWare core functions to implement the driver.

config PCI_LAYERSCAPE
	bool "Freescale Layerscape PCIe controller"
	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
	depends on PCI_MSI_IRQ_DOMAIN
	select MFD_SYSCON
	select PCIE_DW_HOST
	help
	  Say Y here if you want PCIe controller support on Layerscape SoCs.

config PCI_HISI
	depends on OF && (ARM64 || COMPILE_TEST)
	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	select PCI_HOST_COMMON
	help
	  Say Y here if you want PCIe controller support on HiSilicon
	  Hip05 and Hip06 SoCs

config PCIE_QCOM
	bool "Qualcomm PCIe controller"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
	  PCIe controller uses the DesignWare core plus Qualcomm-specific
	  hardware wrappers.

config PCIE_ARMADA_8K
	bool "Marvell Armada-8K PCIe controller"
	depends on ARCH_MVEBU || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here if you want to enable PCIe controller support on
	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
	  DesignWare hardware and therefore the driver re-uses the
	  DesignWare core functions to implement the driver.

config PCIE_ARTPEC6
	bool

config PCIE_ARTPEC6_HOST
	bool "Axis ARTPEC-6 PCIe controller Host Mode"
	depends on MACH_ARTPEC6 || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	select PCIE_ARTPEC6
	help
	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
	  host mode. This uses the DesignWare core.

config PCIE_ARTPEC6_EP
	bool "Axis ARTPEC-6 PCIe controller Endpoint Mode"
	depends on MACH_ARTPEC6 || COMPILE_TEST
	depends on PCI_ENDPOINT
	select PCIE_DW_EP
	select PCIE_ARTPEC6
	help
	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
	  endpoint mode. This uses the DesignWare core.

config PCIE_KIRIN
	depends on OF && (ARM64 || COMPILE_TEST)
	bool "HiSilicon Kirin series SoCs PCIe controllers"
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here if you want PCIe controller support
	  on HiSilicon Kirin series SoCs.

config PCIE_HISI_STB
	bool "HiSilicon STB SoCs PCIe controllers"
	depends on ARCH_HISI || COMPILE_TEST
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
          Say Y here if you want PCIe controller support on HiSilicon STB SoCs

config PCI_MESON
	bool "MESON PCIe controller"
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here if you want to enable PCI controller support on Amlogic
	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
	  and therefore the driver re-uses the DesignWare core functions to
	  implement the driver.

config PCIE_UNIPHIER
	bool "Socionext UniPhier PCIe controllers"
	depends on ARCH_UNIPHIER || COMPILE_TEST
	depends on OF && HAS_IOMEM
	depends on PCI_MSI_IRQ_DOMAIN
	select PCIE_DW_HOST
	help
	  Say Y here if you want PCIe controller support on UniPhier SoCs.
	  This driver supports LD20 and PXs3 SoCs.

endmenu