| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/slab.h> |
| #include <linux/thermal.h> |
| #include "tsens.h" |
| |
| static int tsens_get_temp(void *data, int *temp) |
| { |
| const struct tsens_sensor *s = data; |
| struct tsens_device *tmdev = s->tmdev; |
| |
| return tmdev->ops->get_temp(tmdev, s->id, temp); |
| } |
| |
| static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) |
| { |
| const struct tsens_sensor *s = p; |
| struct tsens_device *tmdev = s->tmdev; |
| |
| if (tmdev->ops->get_trend) |
| return tmdev->ops->get_trend(tmdev, s->id, trend); |
| |
| return -ENOTSUPP; |
| } |
| |
| static int __maybe_unused tsens_suspend(struct device *dev) |
| { |
| struct tsens_device *tmdev = dev_get_drvdata(dev); |
| |
| if (tmdev->ops && tmdev->ops->suspend) |
| return tmdev->ops->suspend(tmdev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tsens_resume(struct device *dev) |
| { |
| struct tsens_device *tmdev = dev_get_drvdata(dev); |
| |
| if (tmdev->ops && tmdev->ops->resume) |
| return tmdev->ops->resume(tmdev); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); |
| |
| static const struct of_device_id tsens_table[] = { |
| { |
| .compatible = "qcom,msm8916-tsens", |
| .data = &data_8916, |
| }, { |
| .compatible = "qcom,msm8974-tsens", |
| .data = &data_8974, |
| }, { |
| .compatible = "qcom,msm8996-tsens", |
| .data = &data_8996, |
| }, { |
| .compatible = "qcom,tsens-v2", |
| .data = &data_tsens_v2, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, tsens_table); |
| |
| static const struct thermal_zone_of_device_ops tsens_of_ops = { |
| .get_temp = tsens_get_temp, |
| .get_trend = tsens_get_trend, |
| }; |
| |
| static int tsens_register(struct tsens_device *tmdev) |
| { |
| int i; |
| struct thermal_zone_device *tzd; |
| |
| for (i = 0; i < tmdev->num_sensors; i++) { |
| tmdev->sensor[i].tmdev = tmdev; |
| tmdev->sensor[i].id = i; |
| tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i, |
| &tmdev->sensor[i], |
| &tsens_of_ops); |
| if (IS_ERR(tzd)) |
| continue; |
| tmdev->sensor[i].tzd = tzd; |
| if (tmdev->ops->enable) |
| tmdev->ops->enable(tmdev, i); |
| } |
| return 0; |
| } |
| |
| static int tsens_probe(struct platform_device *pdev) |
| { |
| int ret, i; |
| struct device *dev; |
| struct device_node *np; |
| struct tsens_device *tmdev; |
| const struct tsens_data *data; |
| const struct of_device_id *id; |
| u32 num_sensors; |
| |
| if (pdev->dev.of_node) |
| dev = &pdev->dev; |
| else |
| dev = pdev->dev.parent; |
| |
| np = dev->of_node; |
| |
| id = of_match_node(tsens_table, np); |
| if (id) |
| data = id->data; |
| else |
| data = &data_8960; |
| |
| num_sensors = data->num_sensors; |
| |
| if (np) |
| of_property_read_u32(np, "#qcom,sensors", &num_sensors); |
| |
| if (num_sensors <= 0) { |
| dev_err(dev, "invalid number of sensors\n"); |
| return -EINVAL; |
| } |
| |
| tmdev = devm_kzalloc(dev, |
| struct_size(tmdev, sensor, num_sensors), |
| GFP_KERNEL); |
| if (!tmdev) |
| return -ENOMEM; |
| |
| tmdev->dev = dev; |
| tmdev->num_sensors = num_sensors; |
| tmdev->ops = data->ops; |
| for (i = 0; i < tmdev->num_sensors; i++) { |
| if (data->hw_ids) |
| tmdev->sensor[i].hw_id = data->hw_ids[i]; |
| else |
| tmdev->sensor[i].hw_id = i; |
| } |
| for (i = 0; i < REG_ARRAY_SIZE; i++) { |
| tmdev->reg_offsets[i] = data->reg_offsets[i]; |
| } |
| |
| if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp) |
| return -EINVAL; |
| |
| ret = tmdev->ops->init(tmdev); |
| if (ret < 0) { |
| dev_err(dev, "tsens init failed\n"); |
| return ret; |
| } |
| |
| if (tmdev->ops->calibrate) { |
| ret = tmdev->ops->calibrate(tmdev); |
| if (ret < 0) { |
| dev_err(dev, "tsens calibration failed\n"); |
| return ret; |
| } |
| } |
| |
| ret = tsens_register(tmdev); |
| |
| platform_set_drvdata(pdev, tmdev); |
| |
| return ret; |
| } |
| |
| static int tsens_remove(struct platform_device *pdev) |
| { |
| struct tsens_device *tmdev = platform_get_drvdata(pdev); |
| |
| if (tmdev->ops->disable) |
| tmdev->ops->disable(tmdev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver tsens_driver = { |
| .probe = tsens_probe, |
| .remove = tsens_remove, |
| .driver = { |
| .name = "qcom-tsens", |
| .pm = &tsens_pm_ops, |
| .of_match_table = tsens_table, |
| }, |
| }; |
| module_platform_driver(tsens_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); |
| MODULE_ALIAS("platform:qcom-tsens"); |