| /* SPDX-License-Identifier: GPL-2.0 */ |
| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. |
| * |
| ******************************************************************************/ |
| #ifndef __RTW_CMD_H_ |
| #define __RTW_CMD_H_ |
| |
| #include <wlan_bssdef.h> |
| #include <rtw_rf.h> |
| #include <rtw_led.h> |
| |
| #include <osdep_service.h> |
| #include <ieee80211.h> /* <ieee80211/ieee80211.h> */ |
| |
| #define MAX_CMDSZ 1024 |
| #define MAX_RSPSZ 512 |
| |
| #define CMDBUFF_ALIGN_SZ 512 |
| |
| struct cmd_obj { |
| struct adapter *padapter; |
| u16 cmdcode; |
| u8 res; |
| u8 *parmbuf; |
| u32 cmdsz; |
| u8 *rsp; |
| u32 rspsz; |
| struct list_head list; |
| }; |
| |
| struct cmd_priv { |
| struct completion cmd_queue_comp; |
| struct completion terminate_cmdthread_comp; |
| struct __queue cmd_queue; |
| u8 cmdthd_running; |
| struct adapter *padapter; |
| }; |
| |
| #define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \ |
| do {\ |
| INIT_LIST_HEAD(&pcmd->list);\ |
| pcmd->cmdcode = code;\ |
| pcmd->parmbuf = (u8 *)(pparm);\ |
| pcmd->cmdsz = sizeof(*pparm);\ |
| pcmd->rsp = NULL;\ |
| pcmd->rspsz = 0;\ |
| } while (0) |
| |
| u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); |
| struct cmd_obj *rtw_dequeue_cmd(struct __queue *queue); |
| void rtw_free_cmd_obj(struct cmd_obj *pcmd); |
| |
| int rtw_cmd_thread(void *context); |
| |
| int rtw_init_cmd_priv(struct cmd_priv *pcmdpriv); |
| |
| enum rtw_drvextra_cmd_id { |
| NONE_WK_CID, |
| DYNAMIC_CHK_WK_CID, |
| DM_CTRL_WK_CID, |
| PBC_POLLING_WK_CID, |
| POWER_SAVING_CTRL_WK_CID,/* IPS,AUTOSuspend */ |
| LPS_CTRL_WK_CID, |
| ANT_SELECT_WK_CID, |
| P2P_PS_WK_CID, |
| P2P_PROTO_WK_CID, |
| CHECK_HIQ_WK_CID,/* for softap mode, check hi queue if empty */ |
| INTEl_WIDI_WK_CID, |
| C2H_WK_CID, |
| RTP_TIMER_CFG_WK_CID, |
| MAX_WK_CID |
| }; |
| |
| enum LPS_CTRL_TYPE { |
| LPS_CTRL_SCAN = 0, |
| LPS_CTRL_JOINBSS = 1, |
| LPS_CTRL_CONNECT = 2, |
| LPS_CTRL_DISCONNECT = 3, |
| LPS_CTRL_SPECIAL_PACKET = 4, |
| LPS_CTRL_LEAVE = 5, |
| }; |
| |
| enum RFINTFS { |
| SWSI, |
| HWSI, |
| HWPI, |
| }; |
| |
| /* |
| * Caller Mode: Infra, Ad-HoC(C) |
| * |
| * Notes: To disconnect the current associated BSS |
| * |
| * Command Mode |
| * |
| */ |
| struct disconnect_parm { |
| u32 deauth_timeout_ms; |
| }; |
| |
| struct setopmode_parm { |
| u8 mode; |
| u8 rsvd[3]; |
| }; |
| |
| /* |
| * Caller Mode: AP, Ad-HoC, Infra |
| * |
| * Notes: To ask RTL8711 performing site-survey |
| * |
| * Command-Event Mode |
| * |
| */ |
| |
| #define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */ |
| #define RTW_CHANNEL_SCAN_AMOUNT (14+37) |
| struct sitesurvey_parm { |
| int scan_mode; /* active: 1, passive: 0 */ |
| u8 ssid_num; |
| u8 ch_num; |
| struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT]; |
| struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT]; |
| }; |
| |
| /* |
| * Caller Mode: Any |
| * |
| * Notes: To set the auth type of RTL8711. open/shared/802.1x |
| * |
| * Command Mode |
| * |
| */ |
| struct setauth_parm { |
| u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */ |
| u8 _1x; /* 0: PSK, 1: TLS */ |
| u8 rsvd[2]; |
| }; |
| |
| /* |
| * Caller Mode: Infra |
| * |
| * a. algorithm: wep40, wep104, tkip & aes |
| * b. keytype: grp key/unicast key |
| * c. key contents |
| * |
| * when shared key ==> keyid is the camid |
| * when 802.1x ==> keyid [0:1] ==> grp key |
| * when 802.1x ==> keyid > 2 ==> unicast key |
| * |
| */ |
| struct setkey_parm { |
| u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */ |
| u8 keyid; |
| u8 grpkey; /* 1: this is the grpkey for 802.1x. |
| * 0: this is the unicast key for 802.1x |
| */ |
| u8 set_tx; /* 1: main tx key for wep. 0: other key. */ |
| u8 key[16]; /* this could be 40 or 104 */ |
| }; |
| |
| /* |
| * When in AP or Ad-Hoc mode, this is used to |
| * allocate an sw/hw entry for a newly associated sta. |
| * |
| * Command |
| * |
| * when shared key ==> algorithm/keyid |
| * |
| */ |
| struct set_stakey_parm { |
| u8 addr[ETH_ALEN]; |
| u8 algorithm; |
| u8 id;/* currently for erasing cam entry if |
| * algorithm == _NO_PRIVACY_ |
| */ |
| u8 key[16]; |
| }; |
| |
| struct set_stakey_rsp { |
| u8 addr[ETH_ALEN]; |
| u8 keyid; |
| u8 rsvd; |
| }; |
| |
| /* |
| * Caller Ad-Hoc/AP |
| * |
| * Command -Rsp(AID == CAMID) mode |
| * |
| * This is to force fw to add an sta_data entry per driver's request. |
| * |
| * FW will write an cam entry associated with it. |
| * |
| */ |
| struct set_assocsta_parm { |
| u8 addr[ETH_ALEN]; |
| }; |
| |
| struct set_assocsta_rsp { |
| u8 cam_id; |
| u8 rsvd[3]; |
| }; |
| |
| /* |
| * Notes: This command is used for H2C/C2H loopback testing |
| * |
| * mac[0] == 0 |
| * ==> CMD mode, return H2C_SUCCESS. |
| * The following condition must be true under CMD mode |
| * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; |
| * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; |
| * s2 == (b1 << 8 | b0); |
| * |
| * mac[0] == 1 |
| * ==> CMD_RSP mode, return H2C_SUCCESS_RSP |
| * |
| * The rsp layout shall be: |
| * rsp: parm: |
| * mac[0] = mac[5]; |
| * mac[1] = mac[4]; |
| * mac[2] = mac[3]; |
| * mac[3] = mac[2]; |
| * mac[4] = mac[1]; |
| * mac[5] = mac[0]; |
| * s0 = s1; |
| * s1 = swap16(s0); |
| * w0 = swap32(w1); |
| * b0 = b1 |
| * s2 = s0 + s1 |
| * b1 = b0 |
| * w1 = w0 |
| * |
| * mac[0] == 2 |
| * ==> CMD_EVENT mode, return H2C_SUCCESS |
| * The event layout shall be: |
| * event: parm: |
| * mac[0] = mac[5]; |
| * mac[1] = mac[4]; |
| * mac[2] = event's seq no, starting from 1 to parm's marc[3] |
| * mac[2] = event's seq no, starting from 1 to parm's marc[3] |
| * mac[2] = event's seq no, starting from 1 to parm's marc[3] |
| * mac[3] = mac[2]; |
| * mac[4] = mac[1]; |
| * mac[5] = mac[0]; |
| * s0 = swap16(s0) - event.mac[2]; |
| * s1 = s1 + event.mac[2]; |
| * w0 = swap32(w0); |
| * b0 = b1 |
| * s2 = s0 + event.mac[2] |
| * b1 = b0 |
| * w1 = swap32(w1) - event.mac[2]; |
| * |
| * parm->mac[3] is the total event counts that host requested. |
| * event will be the same with the cmd's param. |
| */ |
| |
| /* CMD param Format for driver extra cmd handler */ |
| struct drvextra_cmd_parm { |
| int ec_id; /* extra cmd id */ |
| int type_size; /* Can use this field as the type id or command size */ |
| unsigned char *pbuf; |
| }; |
| |
| struct addBaReq_parm { |
| unsigned int tid; |
| u8 addr[ETH_ALEN]; |
| }; |
| |
| /*H2C Handler index: 46 */ |
| struct set_ch_parm { |
| u8 ch; |
| u8 bw; |
| u8 ch_offset; |
| }; |
| |
| /*H2C Handler index: 59 */ |
| struct SetChannelPlan_param { |
| u8 channel_plan; |
| }; |
| |
| /* |
| * |
| * Result: |
| * 0x00: success |
| * 0x01: success, and check Response. |
| * 0x02: cmd ignored due to duplicated sequcne number |
| * 0x03: cmd dropped due to invalid cmd code |
| * 0x04: reserved. |
| * |
| */ |
| |
| #define H2C_SUCCESS 0x00 |
| #define H2C_SUCCESS_RSP 0x01 |
| #define H2C_DROPPED 0x03 |
| #define H2C_PARAMETERS_ERROR 0x04 |
| #define H2C_REJECTED 0x05 |
| |
| u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid, |
| int ssid_num, struct rtw_ieee80211_channel *ch, |
| int ch_num); |
| u8 rtw_createbss_cmd(struct adapter *padapter); |
| u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key); |
| u8 rtw_clearstakey_cmd(struct adapter *padapter, u8 *psta, u8 entry, |
| u8 enqueue); |
| u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork); |
| u8 rtw_disassoc_cmd(struct adapter *padapter, u32 deauth_timeout_ms, |
| bool enqueue); |
| u8 rtw_setopmode_cmd(struct adapter *padapter, |
| enum ndis_802_11_network_infra networktype); |
| u8 rtw_addbareq_cmd(struct adapter *padapter, u8 tid, u8 *addr); |
| |
| u8 rtw_dynamic_chk_wk_cmd(struct adapter *adapter); |
| |
| u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue); |
| u8 rtw_rpt_timer_cfg_cmd(struct adapter *padapter, u16 minRptTime); |
| |
| u8 rtw_antenna_select_cmd(struct adapter *padapter, u8 antenna, u8 enqueue); |
| u8 rtw_ps_cmd(struct adapter *padapter); |
| |
| #ifdef CONFIG_88EU_AP_MODE |
| u8 rtw_chk_hi_queue_cmd(struct adapter *padapter); |
| #endif |
| |
| u8 rtw_set_chplan_cmd(struct adapter *padapter, u8 chplan, u8 enqueue); |
| u8 rtw_drvextra_cmd_hdl(struct adapter *padapter, unsigned char *pbuf); |
| |
| void rtw_survey_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); |
| void rtw_disassoc_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); |
| void rtw_joinbss_cmd_callback(struct adapter *padapter, struct cmd_obj *pcmd); |
| void rtw_createbss_cmd_callback(struct adapter *adapt, struct cmd_obj *pcmd); |
| void rtw_readtssi_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd); |
| |
| void rtw_setstaKey_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd); |
| void rtw_setassocsta_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cm); |
| void rtw_getrttbl_cmdrsp_callback(struct adapter *adapt, struct cmd_obj *cmd); |
| |
| struct _cmd_callback { |
| u32 cmd_code; |
| void (*callback)(struct adapter *padapter, struct cmd_obj *cmd); |
| }; |
| |
| enum rtw_h2c_cmd { |
| _JoinBss_CMD_, |
| _DisConnect_CMD_, |
| _CreateBss_CMD_, |
| _SetOpMode_CMD_, |
| _SiteSurvey_CMD_, |
| _SetAuth_CMD_, |
| _SetKey_CMD_, |
| _SetStaKey_CMD_, |
| _SetAssocSta_CMD_, |
| _AddBAReq_CMD_, |
| _SetChannel_CMD_, |
| _TX_Beacon_CMD_, |
| _Set_MLME_EVT_CMD_, |
| _Set_Drv_Extra_CMD_, |
| _SetChannelPlan_CMD_, |
| |
| MAX_H2CCMD |
| }; |
| |
| #ifdef _RTW_CMD_C_ |
| static struct _cmd_callback rtw_cmd_callback[] = { |
| {_JoinBss_CMD_, &rtw_joinbss_cmd_callback}, |
| {_DisConnect_CMD_, &rtw_disassoc_cmd_callback}, |
| {_CreateBss_CMD_, &rtw_createbss_cmd_callback}, |
| {_SetOpMode_CMD_, NULL}, |
| {_SiteSurvey_CMD_, &rtw_survey_cmd_callback}, |
| {_SetAuth_CMD_, NULL}, |
| {_SetKey_CMD_, NULL}, |
| {_SetStaKey_CMD_, &rtw_setstaKey_cmdrsp_callback}, |
| {_SetAssocSta_CMD_, &rtw_setassocsta_cmdrsp_callback}, |
| {_AddBAReq_CMD_, NULL}, |
| {_SetChannel_CMD_, NULL}, |
| {_TX_Beacon_CMD_, NULL}, |
| {_Set_MLME_EVT_CMD_, NULL}, |
| {_Set_Drv_Extra_CMD_, NULL}, |
| {_SetChannelPlan_CMD_, NULL}, |
| }; |
| #endif |
| |
| #endif /* _CMD_H_ */ |
