/* SPDX-License-Identifier: GPL-2.0 */
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.

#ifndef __ASM_CSKY_UACCESS_H
#define __ASM_CSKY_UACCESS_H

/*
 * User space memory access functions
 */
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/version.h>
#include <asm/segment.h>

static inline int access_ok(const void *addr, unsigned long size)
{
	unsigned long limit = current_thread_info()->addr_limit.seg;

	return (((unsigned long)addr < limit) &&
		((unsigned long)(addr + size) < limit));
}

#define __addr_ok(addr) (access_ok(addr, 0))

extern int __put_user_bad(void);

/*
 * Tell gcc we read from memory instead of writing: this is because
 * we do not write to any memory gcc knows about, so there are no
 * aliasing issues.
 */

/*
 * These are the main single-value transfer routines.  They automatically
 * use the right size if we just have the right pointer type.
 *
 * This gets kind of ugly. We want to return _two_ values in "get_user()"
 * and yet we don't want to do any pointers, because that is too much
 * of a performance impact. Thus we have a few rather ugly macros here,
 * and hide all the ugliness from the user.
 *
 * The "__xxx" versions of the user access functions are versions that
 * do not verify the address space, that must have been done previously
 * with a separate "access_ok()" call (this is used when we do multiple
 * accesses to the same area of user memory).
 *
 * As we use the same address space for kernel and user data on
 * Ckcore, we can just do these as direct assignments.  (Of course, the
 * exception handling means that it's no longer "just"...)
 */

#define put_user(x, ptr) \
	__put_user_check((x), (ptr), sizeof(*(ptr)))

#define __put_user(x, ptr) \
	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))

#define __ptr(x) ((unsigned long *)(x))

#define get_user(x, ptr) \
	__get_user_check((x), (ptr), sizeof(*(ptr)))

#define __get_user(x, ptr) \
	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))

#define __put_user_nocheck(x, ptr, size)				\
({									\
	long __pu_err = 0;						\
	typeof(*(ptr)) *__pu_addr = (ptr);				\
	typeof(*(ptr)) __pu_val = (typeof(*(ptr)))(x);			\
	if (__pu_addr)							\
		__put_user_size(__pu_val, (__pu_addr), (size),		\
				__pu_err);				\
	__pu_err;							\
})

#define __put_user_check(x, ptr, size)					\
({									\
	long __pu_err = -EFAULT;					\
	typeof(*(ptr)) *__pu_addr = (ptr);				\
	typeof(*(ptr)) __pu_val = (typeof(*(ptr)))(x);			\
	if (access_ok(__pu_addr, size) && __pu_addr)	\
		__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
	__pu_err;							\
})

#define __put_user_size(x, ptr, size, retval)		\
do {							\
	retval = 0;					\
	switch (size) {                                 \
	case 1:						\
		__put_user_asm_b(x, ptr, retval);	\
		break;					\
	case 2:						\
		__put_user_asm_h(x, ptr, retval);	\
		break;					\
	case 4:						\
		__put_user_asm_w(x, ptr, retval);	\
		break;					\
	case 8:						\
		__put_user_asm_64(x, ptr, retval);	\
		break;					\
	default:					\
		__put_user_bad();			\
	}	                                        \
} while (0)

/*
 * We don't tell gcc that we are accessing memory, but this is OK
 * because we do not write to any memory gcc knows about, so there
 * are no aliasing issues.
 *
 * Note that PC at a fault is the address *after* the faulting
 * instruction.
 */
#define __put_user_asm_b(x, ptr, err)			\
do {							\
	int errcode;					\
	asm volatile(					\
	"1:     stb   %1, (%2,0)	\n"		\
	"       br    3f		\n"		\
	"2:     mov   %0, %3		\n"		\
	"       br    3f		\n"		\
	".section __ex_table, \"a\"	\n"		\
	".align   2			\n"		\
	".long    1b,2b			\n"		\
	".previous			\n"		\
	"3:				\n"		\
	: "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode)	\
	: "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT)	\
	: "memory");					\
} while (0)

#define __put_user_asm_h(x, ptr, err)			\
do {							\
	int errcode;					\
	asm volatile(					\
	"1:     sth   %1, (%2,0)	\n"		\
	"       br    3f		\n"		\
	"2:     mov   %0, %3		\n"		\
	"       br    3f		\n"		\
	".section __ex_table, \"a\"	\n"		\
	".align   2			\n"		\
	".long    1b,2b			\n"		\
	".previous			\n"		\
	"3:				\n"		\
	: "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode)	\
	: "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT)	\
	: "memory");					\
} while (0)

#define __put_user_asm_w(x, ptr, err)			\
do {							\
	int errcode;					\
	asm volatile(					\
	"1:     stw   %1, (%2,0)	\n"		\
	"       br    3f		\n"		\
	"2:     mov   %0, %3		\n"		\
	"       br    3f		\n"		\
	".section __ex_table,\"a\"	\n"		\
	".align   2			\n"		\
	".long    1b, 2b		\n"		\
	".previous			\n"		\
	"3:				\n"		\
	: "=r"(err), "=r"(x), "=r"(ptr), "=r"(errcode)	\
	: "0"(err), "1"(x), "2"(ptr), "3"(-EFAULT)	\
	: "memory");					\
} while (0)

#define __put_user_asm_64(x, ptr, err)				\
do {								\
	int tmp;						\
	int errcode;						\
	typeof(*(ptr))src = (typeof(*(ptr)))x;			\
	typeof(*(ptr))*psrc = &src;				\
								\
	asm volatile(						\
	"     ldw     %3, (%1, 0)     \n"			\
	"1:   stw     %3, (%2, 0)     \n"			\
	"     ldw     %3, (%1, 4)     \n"			\
	"2:   stw     %3, (%2, 4)     \n"			\
	"     br      4f              \n"			\
	"3:   mov     %0, %4          \n"			\
	"     br      4f              \n"			\
	".section __ex_table, \"a\"   \n"			\
	".align   2                   \n"			\
	".long    1b, 3b              \n"			\
	".long    2b, 3b              \n"			\
	".previous                    \n"			\
	"4:                           \n"			\
	: "=r"(err), "=r"(psrc), "=r"(ptr),			\
	  "=r"(tmp), "=r"(errcode)				\
	: "0"(err), "1"(psrc), "2"(ptr), "3"(0), "4"(-EFAULT)	\
	: "memory");						\
} while (0)

#define __get_user_nocheck(x, ptr, size)			\
({								\
	long  __gu_err;						\
	__get_user_size(x, (ptr), (size), __gu_err);		\
	__gu_err;						\
})

#define __get_user_check(x, ptr, size)				\
({								\
	int __gu_err = -EFAULT;					\
	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);	\
	if (access_ok(__gu_ptr, size) && __gu_ptr)	\
		__get_user_size(x, __gu_ptr, size, __gu_err);	\
	__gu_err;						\
})

#define __get_user_size(x, ptr, size, retval)			\
do {								\
	switch (size) {						\
	case 1:							\
		__get_user_asm_common((x), ptr, "ldb", retval);	\
		break;						\
	case 2:							\
		__get_user_asm_common((x), ptr, "ldh", retval);	\
		break;						\
	case 4:							\
		__get_user_asm_common((x), ptr, "ldw", retval);	\
		break;						\
	default:						\
		x = 0;						\
		(retval) = __get_user_bad();			\
	}							\
} while (0)

#define __get_user_asm_common(x, ptr, ins, err)			\
do {								\
	int errcode;						\
	asm volatile(						\
	"1:   " ins " %1, (%4,0)	\n"			\
	"       br    3f		\n"			\
	/* Fix up codes */					\
	"2:     mov   %0, %2		\n"			\
	"       movi  %1, 0		\n"			\
	"       br    3f		\n"			\
	".section __ex_table,\"a\"      \n"			\
	".align   2			\n"			\
	".long    1b, 2b		\n"			\
	".previous			\n"			\
	"3:				\n" 			\
	: "=r"(err), "=r"(x), "=r"(errcode)			\
	: "0"(0), "r"(ptr), "2"(-EFAULT)			\
	: "memory");						\
} while (0)

extern int __get_user_bad(void);

#define __copy_user(to, from, n)			\
do {							\
	int w0, w1, w2, w3;				\
	asm volatile(					\
	"0:     cmpnei  %1, 0           \n"		\
	"       bf      8f              \n"		\
	"       mov     %3, %1          \n"		\
	"       or      %3, %2          \n"		\
	"       andi    %3, 3           \n"		\
	"       cmpnei  %3, 0           \n"		\
	"       bf      1f              \n"		\
	"       br      5f              \n"		\
	"1:     cmplti  %0, 16          \n" /* 4W */	\
	"       bt      3f              \n"		\
	"       ldw     %3, (%2, 0)     \n"		\
	"       ldw     %4, (%2, 4)     \n"		\
	"       ldw     %5, (%2, 8)     \n"		\
	"       ldw     %6, (%2, 12)    \n"		\
	"2:     stw     %3, (%1, 0)     \n"		\
	"9:     stw     %4, (%1, 4)     \n"		\
	"10:    stw     %5, (%1, 8)     \n"		\
	"11:    stw     %6, (%1, 12)    \n"		\
	"       addi    %2, 16          \n"		\
	"       addi    %1, 16          \n"		\
	"       subi    %0, 16          \n"		\
	"       br      1b              \n"		\
	"3:     cmplti  %0, 4           \n" /* 1W */	\
	"       bt      5f              \n"		\
	"       ldw     %3, (%2, 0)     \n"		\
	"4:     stw     %3, (%1, 0)     \n"		\
	"       addi    %2, 4           \n"		\
	"       addi    %1, 4           \n"		\
	"       subi    %0, 4           \n"		\
	"       br      3b              \n"		\
	"5:     cmpnei  %0, 0           \n"  /* 1B */   \
	"       bf      8f              \n"		\
	"       ldb     %3, (%2, 0)     \n"		\
	"6:     stb     %3, (%1, 0)     \n"		\
	"       addi    %2,  1          \n"		\
	"       addi    %1,  1          \n"		\
	"       subi    %0,  1          \n"		\
	"       br      5b              \n"		\
	"7:     br      8f              \n"		\
	".section __ex_table, \"a\"     \n"		\
	".align   2                     \n"		\
	".long    2b, 7b                \n"		\
	".long    9b, 7b                \n"		\
	".long   10b, 7b                \n"		\
	".long   11b, 7b                \n"		\
	".long    4b, 7b                \n"		\
	".long    6b, 7b                \n"		\
	".previous                      \n"		\
	"8:                             \n"		\
	: "=r"(n), "=r"(to), "=r"(from), "=r"(w0),	\
	  "=r"(w1), "=r"(w2), "=r"(w3)			\
	: "0"(n), "1"(to), "2"(from)			\
	: "memory");					\
} while (0)

#define __copy_user_zeroing(to, from, n)		\
do {							\
	int tmp;					\
	int nsave;					\
	asm volatile(					\
	"0:     cmpnei  %1, 0           \n"		\
	"       bf      7f              \n"		\
	"       mov     %3, %1          \n"		\
	"       or      %3, %2          \n"		\
	"       andi    %3, 3           \n"		\
	"       cmpnei  %3, 0           \n"		\
	"       bf      1f              \n"		\
	"       br      5f              \n"		\
	"1:     cmplti  %0, 16          \n"		\
	"       bt      3f              \n"		\
	"2:     ldw     %3, (%2, 0)     \n"		\
	"10:    ldw     %4, (%2, 4)     \n"		\
	"       stw     %3, (%1, 0)     \n"		\
	"       stw     %4, (%1, 4)     \n"		\
	"11:    ldw     %3, (%2, 8)     \n"		\
	"12:    ldw     %4, (%2, 12)    \n"		\
	"       stw     %3, (%1, 8)     \n"		\
	"       stw     %4, (%1, 12)    \n"		\
	"       addi    %2, 16          \n"		\
	"       addi    %1, 16          \n"		\
	"       subi    %0, 16          \n"		\
	"       br      1b              \n"		\
	"3:     cmplti  %0, 4           \n"		\
	"       bt      5f              \n"		\
	"4:     ldw     %3, (%2, 0)     \n"		\
	"       stw     %3, (%1, 0)     \n"		\
	"       addi    %2, 4           \n"		\
	"       addi    %1, 4           \n"		\
	"       subi    %0, 4           \n"		\
	"       br      3b              \n"		\
	"5:     cmpnei  %0, 0           \n"		\
	"       bf      7f              \n"		\
	"6:     ldb     %3, (%2, 0)     \n"		\
	"       stb     %3, (%1, 0)     \n"		\
	"       addi    %2,  1          \n"		\
	"       addi    %1,  1          \n"		\
	"       subi    %0,  1          \n"		\
	"       br      5b              \n"		\
	"8:     mov     %3, %0          \n"		\
	"       movi    %4, 0           \n"		\
	"9:     stb     %4, (%1, 0)     \n"		\
	"       addi    %1, 1           \n"		\
	"       subi    %3, 1           \n"		\
	"       cmpnei  %3, 0           \n"		\
	"       bt      9b              \n"		\
	"       br      7f              \n"		\
	".section __ex_table, \"a\"     \n"		\
	".align   2                     \n"		\
	".long    2b, 8b                \n"		\
	".long   10b, 8b                \n"		\
	".long   11b, 8b                \n"		\
	".long   12b, 8b                \n"		\
	".long    4b, 8b                \n"		\
	".long    6b, 8b                \n"		\
	".previous                      \n"		\
	"7:                             \n"		\
	: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave),	\
	  "=r"(tmp)					\
	: "0"(n), "1"(to), "2"(from)			\
	: "memory");					\
} while (0)

unsigned long raw_copy_from_user(void *to, const void *from, unsigned long n);
unsigned long raw_copy_to_user(void *to, const void *from, unsigned long n);

unsigned long clear_user(void *to, unsigned long n);
unsigned long __clear_user(void __user *to, unsigned long n);

long strncpy_from_user(char *dst, const char *src, long count);
long __strncpy_from_user(char *dst, const char *src, long count);

/*
 * Return the size of a string (including the ending 0)
 *
 * Return 0 on exception, a value greater than N if too long
 */
long strnlen_user(const char *src, long n);

#define strlen_user(str) strnlen_user(str, 32767)

struct exception_table_entry {
	unsigned long insn;
	unsigned long nextinsn;
};

extern int fixup_exception(struct pt_regs *regs);

#endif /* __ASM_CSKY_UACCESS_H */