blob: 1111a64981023cd8bc9c7ac5b4e05b416632dd50 [file] [log] [blame]
/*
* Copyright 2014 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun8i-a23-a33.dtsi"
#include <dt-bindings/thermal/thermal.h>
/ {
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-120000000 {
opp-hz = /bits/ 64 <120000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-504000000 {
opp-hz = /bits/ 64 <504000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-912000000 {
opp-hz = /bits/ 64 <912000000>;
opp-microvolt = <1200000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1200000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
};
cpus {
cpu@0 {
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&ths>;
};
mali_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
opp-144000000 {
opp-hz = /bits/ 64 <144000000>;
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
};
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&link_codec>;
simple-audio-card,bitclock-master = <&link_codec>;
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "AIF1 Slot 0 Left",
"Right DAC", "AIF1 Slot 0 Right";
status = "disabled";
simple-audio-card,cpu {
sound-dai = <&dai>;
};
link_codec: simple-audio-card,codec {
sound-dai = <&codec>;
};
};
soc {
video-codec@1c0e000 {
compatible = "allwinner,sun8i-a33-video-engine";
reg = <0x01c0e000 0x1000>;
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
<&ccu CLK_DRAM_VE>;
clock-names = "ahb", "mod", "ram";
resets = <&ccu RST_BUS_VE>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
};
crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_SS>;
reset-names = "ahb";
};
dai: dai@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-i2s";
reg = <0x01c22c00 0x200>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
clock-names = "apb", "mod";
resets = <&ccu RST_BUS_CODEC>;
dmas = <&dma 15>, <&dma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
codec: codec@1c22e00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
clock-names = "bus", "mod";
status = "disabled";
};
ths: ths@1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
#thermal-sensor-cells = <0>;
#io-channel-cells = <0>;
};
dsi: dsi@1ca0000 {
compatible = "allwinner,sun6i-a31-mipi-dsi";
reg = <0x01ca0000 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_MIPI_DSI>,
<&ccu CLK_DSI_SCLK>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_MIPI_DSI>;
phys = <&dphy>;
phy-names = "dphy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsi_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_dsi>;
};
};
};
};
dphy: d-phy@1ca1000 {
compatible = "allwinner,sun6i-a31-mipi-dphy";
reg = <0x01ca1000 0x1000>;
clocks = <&ccu CLK_BUS_MIPI_DSI>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_MIPI_DSI>;
status = "disabled";
#phy-cells = <0>;
};
};
thermal-zones {
cpu_thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&ths>;
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map2 {
trip = <&gpu_alert0>;
cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
};
map3 {
trip = <&gpu_alert1>;
cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
};
};
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
gpu_alert0: gpu_alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert1: cpu_alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
gpu_alert1: gpu_alert1 {
/* milliCelsius */
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu_crit: cpu_crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
};
&be0 {
compatible = "allwinner,sun8i-a33-display-backend";
/* A33 has an extra "SAT" module packed inside the display backend */
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
reg-names = "be", "sat";
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
clock-names = "ahb", "mod",
"ram", "sat";
resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
reset-names = "be", "sat";
assigned-clocks = <&ccu CLK_DE_BE>;
assigned-clock-rates = <300000000>;
};
&ccu {
compatible = "allwinner,sun8i-a33-ccu";
};
&de {
compatible = "allwinner,sun8i-a33-display-engine";
};
&drc0 {
compatible = "allwinner,sun8i-a33-drc";
};
&fe0 {
compatible = "allwinner,sun8i-a33-display-frontend";
};
&mali {
operating-points-v2 = <&mali_opp_table>;
};
&pio {
compatible = "allwinner,sun8i-a33-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
uart0_pb_pins: uart0-pb-pins {
pins = "PB0", "PB1";
function = "uart0";
};
};
&tcon0 {
compatible = "allwinner,sun8i-a33-tcon";
};
&tcon0_out {
tcon0_out_dsi: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in_tcon0>;
};
};
&usb_otg {
compatible = "allwinner,sun8i-a33-musb";
};
&usbphy {
compatible = "allwinner,sun8i-a33-usb-phy";
reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
reg-names = "phy_ctrl", "pmu1";
};