| /* |
| * Copyright (C) 2014 STMicroelectronics (R&D) Limited. |
| * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <dt-bindings/clock/stih407-clks.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/media/c8sectpfe.h> |
| / { |
| leds { |
| compatible = "gpio-leds"; |
| red { |
| label = "Front Panel LED"; |
| gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| green { |
| gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| sound: sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "STI-B2120"; |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| simple-audio-card,dai-link@0 { |
| reg = <0>; |
| /* HDMI */ |
| format = "i2s"; |
| mclk-fs = <128>; |
| cpu { |
| sound-dai = <&sti_uni_player0>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_hdmi>; |
| }; |
| }; |
| |
| simple-audio-card,dai-link@1 { |
| reg = <1>; |
| /* DAC */ |
| format = "i2s"; |
| mclk-fs = <256>; |
| frame-inversion = <1>; |
| cpu { |
| sound-dai = <&sti_uni_player2>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_sasg_codec 1>; |
| }; |
| }; |
| |
| simple-audio-card,dai-link@2 { |
| reg = <2>; |
| /* SPDIF */ |
| format = "left_j"; |
| mclk-fs = <128>; |
| cpu { |
| sound-dai = <&sti_uni_player3>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_sasg_codec 0>; |
| }; |
| }; |
| }; |
| |
| soc { |
| sbc_serial0: serial@9530000 { |
| status = "okay"; |
| }; |
| |
| pwm0: pwm@9810000 { |
| status = "okay"; |
| }; |
| |
| pwm1: pwm@9510000 { |
| status = "okay"; |
| }; |
| |
| ssc2: i2c@9842000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| st,i2c-min-scl-pulse-width-us = <0>; |
| st,i2c-min-sda-pulse-width-us = <5>; |
| }; |
| |
| ssc3: i2c@9843000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| st,i2c-min-scl-pulse-width-us = <0>; |
| st,i2c-min-sda-pulse-width-us = <5>; |
| }; |
| |
| i2c@9844000 { |
| status = "okay"; |
| }; |
| |
| i2c@9845000 { |
| status = "okay"; |
| }; |
| |
| i2c@9540000 { |
| status = "okay"; |
| }; |
| |
| mmc0: sdhci@9060000 { |
| non-removable; |
| status = "okay"; |
| }; |
| |
| mmc1: sdhci@9080000 { |
| status = "okay"; |
| }; |
| |
| /* SSC11 to HDMI */ |
| hdmiddc: i2c@9541000 { |
| status = "okay"; |
| /* HDMI V1.3a supports Standard mode only */ |
| clock-frequency = <100000>; |
| st,i2c-min-scl-pulse-width-us = <0>; |
| st,i2c-min-sda-pulse-width-us = <5>; |
| }; |
| |
| miphy28lp_phy: miphy28lp@0 { |
| |
| phy_port0: port@9b22000 { |
| st,osc-rdy; |
| }; |
| |
| phy_port1: port@9b2a000 { |
| st,osc-force-ext; |
| }; |
| }; |
| |
| st_dwc3: dwc3@8f94000 { |
| status = "okay"; |
| }; |
| |
| ethernet0: dwmac@9630000 { |
| st,tx-retime-src = "clkgen"; |
| status = "okay"; |
| phy-mode = "rgmii"; |
| fixed-link = <0 1 1000 0 0>; |
| }; |
| |
| demux@8a20000 { |
| compatible = "st,stih407-c8sectpfe"; |
| status = "okay"; |
| reg = <0x08a20000 0x10000>, |
| <0x08a00000 0x4000>; |
| reg-names = "c8sectpfe", "c8sectpfe-ram"; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "c8sectpfe-error-irq", |
| "c8sectpfe-idle-irq"; |
| pinctrl-0 = <&pinctrl_tsin0_serial>; |
| pinctrl-1 = <&pinctrl_tsin0_parallel>; |
| pinctrl-2 = <&pinctrl_tsin3_serial>; |
| pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; |
| pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; |
| pinctrl-names = "tsin0-serial", |
| "tsin0-parallel", |
| "tsin3-serial", |
| "tsin4-serial", |
| "tsin5-serial"; |
| clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; |
| clock-names = "c8sectpfe"; |
| |
| /* tsin0 is TSA on NIMA */ |
| tsin0: port { |
| tsin-num = <0>; |
| serial-not-parallel; |
| i2c-bus = <&ssc2>; |
| reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; |
| dvb-card = <STV0367_TDA18212_NIMA_1>; |
| }; |
| }; |
| |
| sti_uni_player0: sti-uni-player@8d80000 { |
| status = "okay"; |
| }; |
| |
| sti_uni_player2: sti-uni-player@8d82000 { |
| status = "okay"; |
| }; |
| |
| sti_uni_player3: sti-uni-player@8d85000 { |
| status = "okay"; |
| }; |
| |
| syscfg_core: core-syscfg@92b0000 { |
| sti_sasg_codec: sti-sasg-codec { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif_out>; |
| }; |
| }; |
| }; |
| }; |