| /* |
| * DTS file for all SPEAr3xx SoCs |
| * |
| * Copyright 2012 Viresh Kumar <vireshk@kernel.org> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&vic>; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| compatible = "arm,arm926ej-s"; |
| device_type = "cpu"; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0 0x40000000>; |
| }; |
| |
| ahb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0xd0000000 0xd0000000 0x30000000>; |
| |
| vic: interrupt-controller@f1100000 { |
| compatible = "arm,pl190-vic"; |
| interrupt-controller; |
| reg = <0xf1100000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| dma@fc400000 { |
| compatible = "arm,pl080", "arm,primecell"; |
| reg = <0xfc400000 0x1000>; |
| interrupt-parent = <&vic>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| |
| gmac: eth@e0800000 { |
| compatible = "st,spear600-gmac"; |
| reg = <0xe0800000 0x8000>; |
| interrupts = <23 22>; |
| interrupt-names = "macirq", "eth_wake_irq"; |
| phy-mode = "mii"; |
| status = "disabled"; |
| }; |
| |
| smi: flash@fc000000 { |
| compatible = "st,spear600-smi"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xfc000000 0x1000>; |
| interrupts = <9>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@d0100000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0xd0100000 0x1000>; |
| interrupts = <20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ehci@e1800000 { |
| compatible = "st,spear600-ehci", "usb-ehci"; |
| reg = <0xe1800000 0x1000>; |
| interrupts = <26>; |
| status = "disabled"; |
| }; |
| |
| ohci@e1900000 { |
| compatible = "st,spear600-ohci", "usb-ohci"; |
| reg = <0xe1900000 0x1000>; |
| interrupts = <25>; |
| status = "disabled"; |
| }; |
| |
| ohci@e2100000 { |
| compatible = "st,spear600-ohci", "usb-ohci"; |
| reg = <0xe2100000 0x1000>; |
| interrupts = <27>; |
| status = "disabled"; |
| }; |
| |
| apb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0xd0000000 0xd0000000 0x30000000>; |
| |
| gpio0: gpio@fc980000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0xfc980000 0x1000>; |
| interrupts = <11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@d0180000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xd0180000 0x1000>; |
| interrupts = <21>; |
| status = "disabled"; |
| }; |
| |
| rtc@fc900000 { |
| compatible = "st,spear600-rtc"; |
| reg = <0xfc900000 0x1000>; |
| interrupts = <10>; |
| status = "disabled"; |
| }; |
| |
| serial@d0000000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xd0000000 0x1000>; |
| interrupts = <19>; |
| status = "disabled"; |
| }; |
| |
| wdt@fc880000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0xfc880000 0x1000>; |
| interrupts = <12>; |
| status = "disabled"; |
| }; |
| |
| timer@f0000000 { |
| compatible = "st,spear-timer"; |
| reg = <0xf0000000 0x400>; |
| interrupts = <2>; |
| }; |
| }; |
| }; |
| }; |