| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/clock/rk3228-cru.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| spi0 = &spi0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@f00 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf00>; |
| resets = <&cru SRST_CORE0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; /* min followed by max */ |
| clock-latency = <40000>; |
| clocks = <&cru ARMCLK>; |
| enable-method = "psci"; |
| }; |
| |
| cpu1: cpu@f01 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf01>; |
| resets = <&cru SRST_CORE1>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; /* min followed by max */ |
| enable-method = "psci"; |
| }; |
| |
| cpu2: cpu@f02 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf02>; |
| resets = <&cru SRST_CORE2>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; /* min followed by max */ |
| enable-method = "psci"; |
| }; |
| |
| cpu3: cpu@f03 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf03>; |
| resets = <&cru SRST_CORE3>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; /* min followed by max */ |
| enable-method = "psci"; |
| }; |
| }; |
| |
| cpu0_opp_table: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-408000000 { |
| opp-hz = /bits/ 64 <408000000>; |
| opp-microvolt = <950000>; |
| clock-latency-ns = <40000>; |
| opp-suspend; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <975000>; |
| }; |
| opp-816000000 { |
| opp-hz = /bits/ 64 <816000000>; |
| opp-microvolt = <1000000>; |
| }; |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <1175000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1275000>; |
| }; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma: pdma@110f0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x110f0000 0x4000>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&cru ACLK_DMAC>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0", "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| arm,cpu-registers-not-fw-configured; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| clock-frequency = <24000000>; |
| }; |
| |
| xin24m: oscillator { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| i2s1: i2s1@100b0000 { |
| compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x100b0000 0x4000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; |
| dmas = <&pdma 14>, <&pdma 15>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s0@100c0000 { |
| compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x100c0000 0x4000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; |
| dmas = <&pdma 11>, <&pdma 12>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spdif: spdif@100d0000 { |
| compatible = "rockchip,rk3228-spdif"; |
| reg = <0x100d0000 0x1000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>; |
| clock-names = "mclk", "hclk"; |
| dmas = <&pdma 10>; |
| dma-names = "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spdif_tx>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s2@100e0000 { |
| compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x100e0000 0x4000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; |
| dmas = <&pdma 0>, <&pdma 1>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| grf: syscon@11000000 { |
| compatible = "rockchip,rk3228-grf", "syscon", "simple-mfd"; |
| reg = <0x11000000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| io_domains: io-domains { |
| compatible = "rockchip,rk3228-io-voltage-domain"; |
| status = "disabled"; |
| }; |
| |
| u2phy0: usb2-phy@760 { |
| compatible = "rockchip,rk3228-usb2phy"; |
| reg = <0x0760 0x0c>; |
| clocks = <&cru SCLK_OTGPHY0>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy0"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy0_otg: otg-port { |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "otg-bvalid", "otg-id", |
| "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| u2phy0_host: host-port { |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| u2phy1: usb2-phy@800 { |
| compatible = "rockchip,rk3228-usb2phy"; |
| reg = <0x0800 0x0c>; |
| clocks = <&cru SCLK_OTGPHY1>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy1"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy1_otg: otg-port { |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| u2phy1_host: host-port { |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "linestate"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| uart0: serial@11010000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x11010000 0x100>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@11020000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x11020000 0x100>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@11030000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x11030000 0x100>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_xfer>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| efuse: efuse@11040000 { |
| compatible = "rockchip,rk3228-efuse"; |
| reg = <0x11040000 0x20>; |
| clocks = <&cru PCLK_EFUSE_256>; |
| clock-names = "pclk_efuse"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* Data cells */ |
| efuse_id: id@7 { |
| reg = <0x7 0x10>; |
| }; |
| cpu_leakage: cpu_leakage@17 { |
| reg = <0x17 0x1>; |
| }; |
| }; |
| |
| i2c0: i2c@11050000 { |
| compatible = "rockchip,rk3228-i2c"; |
| reg = <0x11050000 0x1000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11060000 { |
| compatible = "rockchip,rk3228-i2c"; |
| reg = <0x11060000 0x1000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@11070000 { |
| compatible = "rockchip,rk3228-i2c"; |
| reg = <0x11070000 0x1000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@11080000 { |
| compatible = "rockchip,rk3228-i2c"; |
| reg = <0x11080000 0x1000>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_xfer>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@11090000 { |
| compatible = "rockchip,rk3228-spi"; |
| reg = <0x11090000 0x1000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; |
| clock-names = "spiclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>; |
| status = "disabled"; |
| }; |
| |
| wdt: watchdog@110a0000 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x110a0000 0x100>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_CPU>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@110b0000 { |
| compatible = "rockchip,rk3288-pwm"; |
| reg = <0x110b0000 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@110b0010 { |
| compatible = "rockchip,rk3288-pwm"; |
| reg = <0x110b0010 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@110b0020 { |
| compatible = "rockchip,rk3288-pwm"; |
| reg = <0x110b0020 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@110b0030 { |
| compatible = "rockchip,rk3288-pwm"; |
| reg = <0x110b0030 0x10>; |
| #pwm-cells = <2>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3_pin>; |
| status = "disabled"; |
| }; |
| |
| timer: timer@110c0000 { |
| compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer"; |
| reg = <0x110c0000 0x20>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&xin24m>, <&cru PCLK_TIMER>; |
| clock-names = "timer", "pclk"; |
| }; |
| |
| cru: clock-controller@110e0000 { |
| compatible = "rockchip,rk3228-cru"; |
| reg = <0x110e0000 0x1000>; |
| rockchip,grf = <&grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = |
| <&cru PLL_GPLL>, <&cru ARMCLK>, |
| <&cru PLL_CPLL>, <&cru ACLK_PERI>, |
| <&cru HCLK_PERI>, <&cru PCLK_PERI>, |
| <&cru ACLK_CPU>, <&cru HCLK_CPU>, |
| <&cru PCLK_CPU>; |
| assigned-clock-rates = |
| <594000000>, <816000000>, |
| <500000000>, <150000000>, |
| <150000000>, <75000000>, |
| <150000000>, <150000000>, |
| <75000000>; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <100>; /* milliseconds */ |
| polling-delay = <5000>; /* milliseconds */ |
| |
| thermal-sensors = <&tsadc 0>; |
| |
| trips { |
| cpu_alert0: cpu_alert0 { |
| temperature = <70000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "passive"; |
| }; |
| cpu_alert1: cpu_alert1 { |
| temperature = <75000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "passive"; |
| }; |
| cpu_crit: cpu_crit { |
| temperature = <90000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT 6>, |
| <&cpu1 THERMAL_NO_LIMIT 6>, |
| <&cpu2 THERMAL_NO_LIMIT 6>, |
| <&cpu3 THERMAL_NO_LIMIT 6>; |
| }; |
| map1 { |
| trip = <&cpu_alert1>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| tsadc: tsadc@11150000 { |
| compatible = "rockchip,rk3228-tsadc"; |
| reg = <0x11150000 0x100>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; |
| clock-names = "tsadc", "apb_pclk"; |
| assigned-clocks = <&cru SCLK_TSADC>; |
| assigned-clock-rates = <32768>; |
| resets = <&cru SRST_TSADC>; |
| reset-names = "tsadc-apb"; |
| pinctrl-names = "init", "default", "sleep"; |
| pinctrl-0 = <&otp_gpio>; |
| pinctrl-1 = <&otp_out>; |
| pinctrl-2 = <&otp_gpio>; |
| #thermal-sensor-cells = <0>; |
| rockchip,hw-tshut-temp = <95000>; |
| status = "disabled"; |
| }; |
| |
| gpu: gpu@20000000 { |
| compatible = "rockchip,rk3228-mali", "arm,mali-400"; |
| reg = <0x20000000 0x10000>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gp", |
| "gpmmu", |
| "pp0", |
| "ppmmu0", |
| "pp1", |
| "ppmmu1"; |
| clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; |
| clock-names = "core", "bus"; |
| resets = <&cru SRST_GPU_A>; |
| status = "disabled"; |
| }; |
| |
| vpu_mmu: iommu@20020800 { |
| compatible = "rockchip,iommu"; |
| reg = <0x20020800 0x100>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "vpu_mmu"; |
| clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; |
| clock-names = "aclk", "iface"; |
| iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| vdec_mmu: iommu@20030480 { |
| compatible = "rockchip,iommu"; |
| reg = <0x20030480 0x40>, <0x200304c0 0x40>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "vdec_mmu"; |
| clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; |
| clock-names = "aclk", "iface"; |
| iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| vop_mmu: iommu@20053f00 { |
| compatible = "rockchip,iommu"; |
| reg = <0x20053f00 0x100>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "vop_mmu"; |
| clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; |
| clock-names = "aclk", "iface"; |
| iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| iep_mmu: iommu@20070800 { |
| compatible = "rockchip,iommu"; |
| reg = <0x20070800 0x100>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "iep_mmu"; |
| clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; |
| clock-names = "aclk", "iface"; |
| iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sdmmc: dwmmc@30000000 { |
| compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x30000000 0x4000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, |
| <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
| status = "disabled"; |
| }; |
| |
| sdio: dwmmc@30010000 { |
| compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x30010000 0x4000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, |
| <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; |
| status = "disabled"; |
| }; |
| |
| emmc: dwmmc@30020000 { |
| compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x30020000 0x4000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <37500000>; |
| max-frequency = <37500000>; |
| clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, |
| <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| bus-width = <8>; |
| default-sample-phase = <158>; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| resets = <&cru SRST_EMMC>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| usb_otg: usb@30040000 { |
| compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", |
| "snps,dwc2"; |
| reg = <0x30040000 0x40000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_OTG>; |
| clock-names = "otg"; |
| dr_mode = "otg"; |
| g-np-tx-fifo-size = <16>; |
| g-rx-fifo-size = <280>; |
| g-tx-fifo-size = <256 128 128 64 32 16>; |
| g-use-dma; |
| phys = <&u2phy0_otg>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usb_host0_ehci: usb@30080000 { |
| compatible = "generic-ehci"; |
| reg = <0x30080000 0x20000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST0>, <&u2phy0>; |
| clock-names = "usbhost", "utmi"; |
| phys = <&u2phy0_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host0_ohci: usb@300a0000 { |
| compatible = "generic-ohci"; |
| reg = <0x300a0000 0x20000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST0>, <&u2phy0>; |
| clock-names = "usbhost", "utmi"; |
| phys = <&u2phy0_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ehci: usb@300c0000 { |
| compatible = "generic-ehci"; |
| reg = <0x300c0000 0x20000>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST1>, <&u2phy1>; |
| clock-names = "usbhost", "utmi"; |
| phys = <&u2phy1_otg>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ohci: usb@300e0000 { |
| compatible = "generic-ohci"; |
| reg = <0x300e0000 0x20000>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST1>, <&u2phy1>; |
| clock-names = "usbhost", "utmi"; |
| phys = <&u2phy1_otg>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host2_ehci: usb@30100000 { |
| compatible = "generic-ehci"; |
| reg = <0x30100000 0x20000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST2>, <&u2phy1>; |
| phys = <&u2phy1_host>; |
| phy-names = "usb"; |
| clock-names = "usbhost", "utmi"; |
| status = "disabled"; |
| }; |
| |
| usb_host2_ohci: usb@30120000 { |
| compatible = "generic-ohci"; |
| reg = <0x30120000 0x20000>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_HOST2>, <&u2phy1>; |
| clock-names = "usbhost", "utmi"; |
| phys = <&u2phy1_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| gmac: ethernet@30200000 { |
| compatible = "rockchip,rk3228-gmac"; |
| reg = <0x30200000 0x10000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, |
| <&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>, |
| <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>, |
| <&cru PCLK_GMAC>; |
| clock-names = "stmmaceth", "mac_clk_rx", |
| "mac_clk_tx", "clk_mac_ref", |
| "clk_mac_refout", "aclk_mac", |
| "pclk_mac"; |
| resets = <&cru SRST_GMAC>; |
| reset-names = "stmmaceth"; |
| rockchip,grf = <&grf>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@32010000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| |
| reg = <0x32011000 0x1000>, |
| <0x32012000 0x2000>, |
| <0x32014000 0x2000>, |
| <0x32016000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3228-pinctrl"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio0: gpio0@11110000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x11110000 0x100>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio1@11120000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x11120000 0x100>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO1>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio2@11130000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x11130000 0x100>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO2>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio3@11140000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x11140000 0x100>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO3>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcfg_pull_up: pcfg-pull-up { |
| bias-pull-up; |
| }; |
| |
| pcfg_pull_down: pcfg-pull-down { |
| bias-pull-down; |
| }; |
| |
| pcfg_pull_none: pcfg-pull-none { |
| bias-disable; |
| }; |
| |
| pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { |
| drive-strength = <12>; |
| }; |
| |
| sdmmc { |
| sdmmc_clk: sdmmc-clk { |
| rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| |
| sdmmc_cmd: sdmmc-cmd { |
| rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| |
| sdmmc_bus4: sdmmc-bus4 { |
| rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>, |
| <1 RK_PC3 1 &pcfg_pull_none_drv_12ma>, |
| <1 RK_PC4 1 &pcfg_pull_none_drv_12ma>, |
| <1 RK_PC5 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| }; |
| |
| sdio { |
| sdio_clk: sdio-clk { |
| rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| |
| sdio_cmd: sdio-cmd { |
| rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| |
| sdio_bus4: sdio-bus4 { |
| rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>, |
| <3 RK_PA3 1 &pcfg_pull_none_drv_12ma>, |
| <3 RK_PA4 1 &pcfg_pull_none_drv_12ma>, |
| <3 RK_PA5 1 &pcfg_pull_none_drv_12ma>; |
| }; |
| }; |
| |
| emmc { |
| emmc_clk: emmc-clk { |
| rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_cmd: emmc-cmd { |
| rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_bus8: emmc-bus8 { |
| rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, |
| <1 25 RK_FUNC_2 &pcfg_pull_none>, |
| <1 26 RK_FUNC_2 &pcfg_pull_none>, |
| <1 27 RK_FUNC_2 &pcfg_pull_none>, |
| <1 28 RK_FUNC_2 &pcfg_pull_none>, |
| <1 29 RK_FUNC_2 &pcfg_pull_none>, |
| <1 30 RK_FUNC_2 &pcfg_pull_none>, |
| <1 31 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| gmac { |
| rgmii_pins: rgmii-pins { |
| rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, |
| <2 12 RK_FUNC_1 &pcfg_pull_none>, |
| <2 25 RK_FUNC_1 &pcfg_pull_none>, |
| <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 17 RK_FUNC_1 &pcfg_pull_none>, |
| <2 16 RK_FUNC_1 &pcfg_pull_none>, |
| <2 21 RK_FUNC_2 &pcfg_pull_none>, |
| <2 20 RK_FUNC_2 &pcfg_pull_none>, |
| <2 11 RK_FUNC_1 &pcfg_pull_none>, |
| <2 8 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| rmii_pins: rmii-pins { |
| rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, |
| <2 12 RK_FUNC_1 &pcfg_pull_none>, |
| <2 25 RK_FUNC_1 &pcfg_pull_none>, |
| <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, |
| <2 17 RK_FUNC_1 &pcfg_pull_none>, |
| <2 16 RK_FUNC_1 &pcfg_pull_none>, |
| <2 8 RK_FUNC_1 &pcfg_pull_none>, |
| <2 15 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| phy_pins: phy-pins { |
| rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>, |
| <2 8 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, |
| <0 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, |
| <0 3 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, |
| <2 21 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c3 { |
| i2c3_xfer: i2c3-xfer { |
| rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, |
| <0 7 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spi-0 { |
| spi0_clk: spi0-clk { |
| rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_cs0: spi0-cs0 { |
| rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_tx: spi0-tx { |
| rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_rx: spi0-rx { |
| rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_cs1: spi0-cs1 { |
| rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi-1 { |
| spi1_clk: spi1-clk { |
| rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_cs0: spi1-cs0 { |
| rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_rx: spi1-rx { |
| rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_tx: spi1-tx { |
| rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_cs1: spi1-cs1 { |
| rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| }; |
| |
| i2s1 { |
| i2s1_bus: i2s1-bus { |
| rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, |
| <0 9 RK_FUNC_1 &pcfg_pull_none>, |
| <0 11 RK_FUNC_1 &pcfg_pull_none>, |
| <0 12 RK_FUNC_1 &pcfg_pull_none>, |
| <0 13 RK_FUNC_1 &pcfg_pull_none>, |
| <0 14 RK_FUNC_1 &pcfg_pull_none>, |
| <1 2 RK_FUNC_2 &pcfg_pull_none>, |
| <1 4 RK_FUNC_2 &pcfg_pull_none>, |
| <1 5 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm0 { |
| pwm0_pin: pwm0-pin { |
| rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_pin: pwm1-pin { |
| rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_pin: pwm2-pin { |
| rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3 { |
| pwm3_pin: pwm3-pin { |
| rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spdif { |
| spdif_tx: spdif-tx { |
| rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| tsadc { |
| otp_gpio: otp-gpio { |
| rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| otp_out: otp-out { |
| rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, |
| <2 27 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, |
| <1 10 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart1_cts: uart1-cts { |
| rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart1_rts: uart1-rts { |
| rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2 { |
| uart2_xfer: uart2-xfer { |
| rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, |
| <1 19 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| uart21_xfer: uart21-xfer { |
| rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>, |
| <1 9 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| uart2_cts: uart2-cts { |
| rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart2_rts: uart2-rts { |
| rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| }; |