| /* |
| * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC |
| * |
| * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> |
| * |
| * Licensed under GPLv2 or later |
| */ |
| |
| #include <dt-bindings/clock/oxsemi,ox810se.h> |
| #include <dt-bindings/reset/oxsemi,ox810se.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "oxsemi,ox810se"; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| device_type = "cpu"; |
| compatible = "arm,arm926ej-s"; |
| clocks = <&armclk>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| /* Max 256MB @ 0x48000000 */ |
| reg = <0x48000000 0x10000000>; |
| }; |
| |
| clocks { |
| osc: oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| gmacclk: gmacclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <125000000>; |
| }; |
| |
| rpsclk: rpsclk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <1>; |
| clocks = <&osc>; |
| }; |
| |
| pll400: pll400 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <733333333>; |
| }; |
| |
| sysclk: sysclk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <4>; |
| clock-mult = <1>; |
| clocks = <&pll400>; |
| }; |
| |
| armclk: armclk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <2>; |
| clock-mult = <1>; |
| clocks = <&pll400>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| interrupt-parent = <&intc>; |
| |
| apb-bridge@44000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0 0x44000000 0x1000000>; |
| |
| pinctrl: pinctrl { |
| compatible = "oxsemi,ox810se-pinctrl"; |
| |
| /* Regmap for sys registers */ |
| oxsemi,sys-ctrl = <&sys>; |
| |
| pinctrl_uart0: uart0 { |
| uart0a { |
| pins = "gpio31"; |
| function = "fct3"; |
| }; |
| uart0b { |
| pins = "gpio32"; |
| function = "fct3"; |
| }; |
| }; |
| |
| pinctrl_uart0_modem: uart0_modem { |
| uart0c { |
| pins = "gpio27"; |
| function = "fct3"; |
| }; |
| uart0d { |
| pins = "gpio28"; |
| function = "fct3"; |
| }; |
| uart0e { |
| pins = "gpio29"; |
| function = "fct3"; |
| }; |
| uart0f { |
| pins = "gpio30"; |
| function = "fct3"; |
| }; |
| uart0g { |
| pins = "gpio33"; |
| function = "fct3"; |
| }; |
| uart0h { |
| pins = "gpio34"; |
| function = "fct3"; |
| }; |
| }; |
| |
| pinctrl_uart1: uart1 { |
| uart1a { |
| pins = "gpio20"; |
| function = "fct3"; |
| }; |
| uart1b { |
| pins = "gpio22"; |
| function = "fct3"; |
| }; |
| }; |
| |
| pinctrl_uart1_modem: uart1_modem { |
| uart1c { |
| pins = "gpio8"; |
| function = "fct3"; |
| }; |
| uart1d { |
| pins = "gpio9"; |
| function = "fct3"; |
| }; |
| uart1e { |
| pins = "gpio23"; |
| function = "fct3"; |
| }; |
| uart1f { |
| pins = "gpio24"; |
| function = "fct3"; |
| }; |
| uart1g { |
| pins = "gpio25"; |
| function = "fct3"; |
| }; |
| uart1h { |
| pins = "gpio26"; |
| function = "fct3"; |
| }; |
| }; |
| |
| pinctrl_uart2: uart2 { |
| uart2a { |
| pins = "gpio6"; |
| function = "fct3"; |
| }; |
| uart2b { |
| pins = "gpio7"; |
| function = "fct3"; |
| }; |
| }; |
| |
| pinctrl_uart2_modem: uart2_modem { |
| uart2c { |
| pins = "gpio0"; |
| function = "fct3"; |
| }; |
| uart2d { |
| pins = "gpio1"; |
| function = "fct3"; |
| }; |
| uart2e { |
| pins = "gpio2"; |
| function = "fct3"; |
| }; |
| uart2f { |
| pins = "gpio3"; |
| function = "fct3"; |
| }; |
| uart2g { |
| pins = "gpio4"; |
| function = "fct3"; |
| }; |
| uart2h { |
| pins = "gpio5"; |
| function = "fct3"; |
| }; |
| }; |
| }; |
| |
| gpio0: gpio@0 { |
| compatible = "oxsemi,ox810se-gpio"; |
| reg = <0x000000 0x100000>; |
| interrupts = <21>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ngpios = <32>; |
| oxsemi,gpio-bank = <0>; |
| gpio-ranges = <&pinctrl 0 0 32>; |
| }; |
| |
| gpio1: gpio@100000 { |
| compatible = "oxsemi,ox810se-gpio"; |
| reg = <0x100000 0x100000>; |
| interrupts = <22>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ngpios = <3>; |
| oxsemi,gpio-bank = <1>; |
| gpio-ranges = <&pinctrl 0 32 3>; |
| }; |
| |
| uart0: serial@200000 { |
| compatible = "ns16550a"; |
| reg = <0x200000 0x100000>; |
| clocks = <&sysclk>; |
| interrupts = <23>; |
| reg-shift = <0>; |
| fifo-size = <16>; |
| reg-io-width = <1>; |
| current-speed = <115200>; |
| no-loopback-test; |
| status = "disabled"; |
| resets = <&reset RESET_UART1>; |
| }; |
| |
| uart1: serial@300000 { |
| compatible = "ns16550a"; |
| reg = <0x300000 0x100000>; |
| clocks = <&sysclk>; |
| interrupts = <24>; |
| reg-shift = <0>; |
| fifo-size = <16>; |
| reg-io-width = <1>; |
| current-speed = <115200>; |
| no-loopback-test; |
| status = "disabled"; |
| resets = <&reset RESET_UART2>; |
| }; |
| |
| uart2: serial@900000 { |
| compatible = "ns16550a"; |
| reg = <0x900000 0x100000>; |
| clocks = <&sysclk>; |
| interrupts = <29>; |
| reg-shift = <0>; |
| fifo-size = <16>; |
| reg-io-width = <1>; |
| current-speed = <115200>; |
| no-loopback-test; |
| status = "disabled"; |
| resets = <&reset RESET_UART3>; |
| }; |
| |
| uart3: serial@a00000 { |
| compatible = "ns16550a"; |
| reg = <0xa00000 0x100000>; |
| clocks = <&sysclk>; |
| interrupts = <30>; |
| reg-shift = <0>; |
| fifo-size = <16>; |
| reg-io-width = <1>; |
| current-speed = <115200>; |
| no-loopback-test; |
| status = "disabled"; |
| resets = <&reset RESET_UART4>; |
| }; |
| }; |
| |
| apb-bridge@45000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0 0x45000000 0x1000000>; |
| |
| sys: sys-ctrl@0 { |
| compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; |
| reg = <0x000000 0x100000>; |
| |
| reset: reset-controller { |
| compatible = "oxsemi,ox810se-reset"; |
| #reset-cells = <1>; |
| }; |
| |
| stdclk: stdclk { |
| compatible = "oxsemi,ox810se-stdclk"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| rps@300000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0 0x300000 0x100000>; |
| |
| intc: interrupt-controller@0 { |
| compatible = "oxsemi,ox810se-rps-irq"; |
| interrupt-controller; |
| reg = <0 0x200>; |
| #interrupt-cells = <1>; |
| valid-mask = <0xFFFFFFFF>; |
| clear-mask = <0>; |
| }; |
| |
| timer0: timer@200 { |
| compatible = "oxsemi,ox810se-rps-timer"; |
| reg = <0x200 0x40>; |
| clocks = <&rpsclk>; |
| interrupts = <4 5>; |
| }; |
| }; |
| }; |
| }; |
| }; |