blob: 6f54a8897574da85b663d7b1631502e1c4351781 [file] [log] [blame]
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
L2: l2-cache-controller@c4200000 {
compatible = "arm,pl310-cache";
reg = <0xc4200000 0x1000>;
cache-unified;
cache-level = <2>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0xc1100000 0x200000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
hhi: system-controller@4000 {
compatible = "amlogic,meson-hhi-sysctrl",
"simple-mfd",
"syscon";
reg = <0x4000 0x400>;
};
assist: assist@7c00 {
compatible = "amlogic,meson-mx-assist", "syscon";
reg = <0x7c00 0x200>;
};
hwrng: rng@8100 {
compatible = "amlogic,meson-rng";
reg = <0x8100 0x8>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x84c0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x84dc 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson6-i2c";
reg = <0x8500 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-pwm";
reg = <0x8550 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-pwm";
reg = <0x8650 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
saradc: adc@8680 {
compatible = "amlogic,meson-saradc";
reg = <0x8680 0x34>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x8700 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson6-i2c";
reg = <0x87c0 0x20>;
interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usb0_phy: phy@8800 {
compatible = "amlogic,meson-mx-usb2-phy";
#phy-cells = <0>;
reg = <0x8800 0x20>;
status = "disabled";
};
usb1_phy: phy@8820 {
compatible = "amlogic,meson-mx-usb2-phy";
#phy-cells = <0>;
reg = <0x8820 0x20>;
status = "disabled";
};
sdio: mmc@8c20 {
compatible = "amlogic,meson-mx-sdio";
reg = <0x8c20 0x20>;
interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spifc: spi@8c80 {
compatible = "amlogic,meson6-spifc";
reg = <0x8c80 0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gpio_intc: interrupt-controller@9880 {
compatible = "amlogic,meson-gpio-intc";
reg = <0x9880 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
status = "disabled";
};
wdt: watchdog@9900 {
compatible = "amlogic,meson6-wdt";
reg = <0x9900 0x8>;
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer_abcde: timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
};
};
periph: bus@c4300000 {
compatible = "simple-bus";
reg = <0xc4300000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc4300000 0x10000>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a9-gic";
reg = <0x1000 0x1000>,
<0x100 0x100>;
interrupt-controller;
#interrupt-cells = <3>;
};
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0xc8100000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc8100000 0x100000>;
ir_receiver: ir-receiver@480 {
compatible= "amlogic,meson6-ir";
reg = <0x480 0x20>;
interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x4c0 0x18>;
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson6-i2c";
reg = <0x500 0x20>;
interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
usb0: usb@c9040000 {
compatible = "snps,dwc2";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc9040000 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c90c0000 {
compatible = "snps,dwc2";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc90c0000 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
0xc1108108 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
status = "disabled";
};
ahb_sram: sram@d9000000 {
compatible = "mmio-sram";
reg = <0xd9000000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xd9000000 0x20000>;
};
bootrom: bootrom@d9040000 {
compatible = "amlogic,meson-mx-bootrom", "syscon";
reg = <0xd9040000 0x10000>;
};
secbus: secbus@da000000 {
compatible = "simple-bus";
reg = <0xda000000 0x6000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xda000000 0x6000>;
efuse: nvmem@0 {
compatible = "amlogic,meson6-efuse";
reg = <0x0 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
};
};
};
}; /* end of / */