| /* |
| * Copyright 2014-2017 Toradex AG |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "imx6q.dtsi" |
| #include "imx6qdl-apalis.dtsi" |
| |
| / { |
| model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; |
| compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", |
| "fsl,imx6q"; |
| |
| aliases { |
| i2c0 = &i2c1; |
| i2c1 = &i2c3; |
| i2c2 = &i2c2; |
| rtc0 = &rtc_i2c; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| wakeup { |
| label = "Wake-Up"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WAKEUP>; |
| debounce-interval = <10>; |
| wakeup-source; |
| }; |
| }; |
| |
| lcd_display: disp0 { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interface-pix-fmt = "rgb24"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_lcdif>; |
| status = "okay"; |
| |
| port@0 { |
| reg = <0>; |
| |
| lcd_display_in: endpoint { |
| remote-endpoint = <&ipu1_di1_disp1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lcd_display_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| panel: panel { |
| /* |
| * edt,et057090dhu: EDT 5.7" LCD TFT |
| * edt,et070080dh6: EDT 7.0" LCD TFT |
| */ |
| compatible = "edt,et057090dhu"; |
| backlight = <&backlight>; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcd_display_out>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_leds_ixora>; |
| |
| led4-green { |
| label = "LED_4_GREEN"; |
| gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led4-red { |
| label = "LED_4_RED"; |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led5-green { |
| label = "LED_5_GREEN"; |
| gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led5-red { |
| label = "LED_5_RED"; |
| gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &backlight { |
| brightness-levels = <0 127 191 223 239 247 251 255>; |
| default-brightness-level = <1>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| status = "okay"; |
| }; |
| |
| &can2 { |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| status = "okay"; |
| }; |
| |
| /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| &i2c1 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| |
| /* M41T0M6 real time clock on carrier board */ |
| rtc_i2c: rtc@68 { |
| compatible = "st,m41t0"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| /* |
| * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| * board) |
| */ |
| &i2c3 { |
| status = "okay"; |
| }; |
| |
| &ipu1_di1_disp1 { |
| remote-endpoint = <&lcd_display_in>; |
| }; |
| |
| &ldb { |
| status = "okay"; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reset_moci>; |
| /* active-high meaning opposite of regular PERST# active-low polarity */ |
| reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| reset-gpio-active-high; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| status = "okay"; |
| }; |
| |
| ®_usb_otg_vbus { |
| status = "okay"; |
| }; |
| |
| ®_usb_host_vbus { |
| status = "okay"; |
| }; |
| |
| &sata { |
| status = "okay"; |
| }; |
| |
| &sound_spdif { |
| status = "okay"; |
| }; |
| |
| &spdif { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usb_host_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| status = "okay"; |
| }; |
| |
| /* SD1 */ |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; |
| cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| /* Mux the Apalis GPIOs */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 |
| &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 |
| &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 |
| &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 |
| >; |
| |
| pinctrl_leds_ixora: ledsixoragrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |
| MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| >; |
| }; |
| }; |