| &l4_cfg { /* 0x4a000000 */ |
| compatible = "ti,dra7-l4-cfg", "simple-bus"; |
| reg = <0x4a000000 0x800>, |
| <0x4a000800 0x800>, |
| <0x4a001000 0x1000>; |
| reg-names = "ap", "la", "ia0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ |
| <0x00100000 0x4a100000 0x100000>, /* segment 1 */ |
| <0x00200000 0x4a200000 0x100000>; /* segment 2 */ |
| |
| segment@0 { /* 0x4a000000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 1 */ |
| <0x00001000 0x00001000 0x001000>, /* ap 2 */ |
| <0x00002000 0x00002000 0x002000>, /* ap 3 */ |
| <0x00004000 0x00004000 0x001000>, /* ap 4 */ |
| <0x00005000 0x00005000 0x001000>, /* ap 5 */ |
| <0x00006000 0x00006000 0x001000>, /* ap 6 */ |
| <0x00008000 0x00008000 0x002000>, /* ap 7 */ |
| <0x0000a000 0x0000a000 0x001000>, /* ap 8 */ |
| <0x00056000 0x00056000 0x001000>, /* ap 9 */ |
| <0x00057000 0x00057000 0x001000>, /* ap 10 */ |
| <0x0005e000 0x0005e000 0x002000>, /* ap 11 */ |
| <0x00060000 0x00060000 0x001000>, /* ap 12 */ |
| <0x00080000 0x00080000 0x008000>, /* ap 13 */ |
| <0x00088000 0x00088000 0x001000>, /* ap 14 */ |
| <0x000a0000 0x000a0000 0x008000>, /* ap 15 */ |
| <0x000a8000 0x000a8000 0x001000>, /* ap 16 */ |
| <0x000d9000 0x000d9000 0x001000>, /* ap 17 */ |
| <0x000da000 0x000da000 0x001000>, /* ap 18 */ |
| <0x000dd000 0x000dd000 0x001000>, /* ap 19 */ |
| <0x000de000 0x000de000 0x001000>, /* ap 20 */ |
| <0x000e0000 0x000e0000 0x001000>, /* ap 21 */ |
| <0x000e1000 0x000e1000 0x001000>, /* ap 22 */ |
| <0x000f4000 0x000f4000 0x001000>, /* ap 23 */ |
| <0x000f5000 0x000f5000 0x001000>, /* ap 24 */ |
| <0x000f6000 0x000f6000 0x001000>, /* ap 25 */ |
| <0x000f7000 0x000f7000 0x001000>, /* ap 26 */ |
| <0x00090000 0x00090000 0x008000>, /* ap 59 */ |
| <0x00098000 0x00098000 0x001000>; /* ap 60 */ |
| |
| target-module@2000 { /* 0x4a002000, ap 3 08.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x2000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2000 0x2000>; |
| |
| scm: scm@0 { |
| compatible = "ti,dra7-scm-core", "simple-bus"; |
| reg = <0 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x2000>; |
| |
| scm_conf: scm_conf@0 { |
| compatible = "syscon", "simple-bus"; |
| reg = <0x0 0x1400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x1400>; |
| |
| pbias_regulator: pbias_regulator@e00 { |
| compatible = "ti,pbias-dra7", "ti,pbias-omap"; |
| reg = <0xe00 0x4>; |
| syscon = <&scm_conf>; |
| pbias_mmc_reg: pbias_mmc_omap5 { |
| regulator-name = "pbias_mmc_omap5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| |
| phy_gmii_sel: phy-gmii-sel { |
| compatible = "ti,dra7xx-phy-gmii-sel"; |
| reg = <0x554 0x4>; |
| #phy-cells = <1>; |
| }; |
| |
| scm_conf_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| dra7_pmx_core: pinmux@1400 { |
| compatible = "ti,dra7-padconf", |
| "pinctrl-single"; |
| reg = <0x1400 0x0468>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0x3fffffff>; |
| }; |
| |
| scm_conf1: scm_conf@1c04 { |
| compatible = "syscon"; |
| reg = <0x1c04 0x0020>; |
| #syscon-cells = <2>; |
| }; |
| |
| scm_conf_pcie: scm_conf@1c24 { |
| compatible = "syscon"; |
| reg = <0x1c24 0x0024>; |
| }; |
| |
| sdma_xbar: dma-router@b78 { |
| compatible = "ti,dra7-dma-crossbar"; |
| reg = <0xb78 0xfc>; |
| #dma-cells = <1>; |
| dma-requests = <205>; |
| ti,dma-safe-map = <0>; |
| dma-masters = <&sdma>; |
| }; |
| |
| edma_xbar: dma-router@c78 { |
| compatible = "ti,dra7-dma-crossbar"; |
| reg = <0xc78 0x7c>; |
| #dma-cells = <2>; |
| dma-requests = <204>; |
| ti,dma-safe-map = <0>; |
| dma-masters = <&edma>; |
| }; |
| }; |
| }; |
| |
| target-module@5000 { /* 0x4a005000, ap 5 10.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x5000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5000 0x1000>; |
| |
| cm_core_aon: cm_core_aon@0 { |
| compatible = "ti,dra7-cm-core-aon", |
| "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x2000>; |
| ranges = <0 0 0x2000>; |
| |
| cm_core_aon_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cm_core_aon_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@8000 { /* 0x4a008000, ap 7 0e.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x8000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x8000 0x2000>; |
| |
| cm_core: cm_core@0 { |
| compatible = "ti,dra7-cm-core", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x3000>; |
| ranges = <0 0 0x3000>; |
| |
| cm_core_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cm_core_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@56000 { /* 0x4a056000, ap 9 02.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "dma_system"; |
| reg = <0x56000 0x4>, |
| <0x5602c 0x4>, |
| <0x56028 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): core_pwrdm, dma_clkdm */ |
| clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x56000 0x1000>; |
| |
| sdma: dma-controller@0 { |
| compatible = "ti,omap4430-sdma"; |
| reg = <0x0 0x1000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| dma-channels = <32>; |
| dma-requests = <127>; |
| }; |
| }; |
| |
| target-module@5e000 { /* 0x4a05e000, ap 11 1a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5e000 0x2000>; |
| }; |
| |
| target-module@80000 { /* 0x4a080000, ap 13 20.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "ocp2scp1"; |
| reg = <0x80000 0x4>, |
| <0x80010 0x4>, |
| <0x80014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ |
| clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x80000 0x8000>; |
| |
| ocp2scp@0 { |
| compatible = "ti,omap-ocp2scp"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x8000>; |
| reg = <0x0 0x20>; |
| |
| usb2_phy1: phy@4000 { |
| compatible = "ti,dra7x-usb2", "ti,omap-usb2"; |
| reg = <0x4000 0x400>; |
| syscon-phy-power = <&scm_conf 0x300>; |
| clocks = <&usb_phy1_always_on_clk32k>, |
| <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; |
| clock-names = "wkupclk", |
| "refclk"; |
| #phy-cells = <0>; |
| }; |
| |
| usb2_phy2: phy@5000 { |
| compatible = "ti,dra7x-usb2-phy2", |
| "ti,omap-usb2"; |
| reg = <0x5000 0x400>; |
| syscon-phy-power = <&scm_conf 0xe74>; |
| clocks = <&usb_phy2_always_on_clk32k>, |
| <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; |
| clock-names = "wkupclk", |
| "refclk"; |
| #phy-cells = <0>; |
| }; |
| |
| usb3_phy1: phy@4400 { |
| compatible = "ti,omap-usb3"; |
| reg = <0x4400 0x80>, |
| <0x4800 0x64>, |
| <0x4c00 0x40>; |
| reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| syscon-phy-power = <&scm_conf 0x370>; |
| clocks = <&usb_phy3_always_on_clk32k>, |
| <&sys_clkin1>, |
| <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; |
| clock-names = "wkupclk", |
| "sysclk", |
| "refclk"; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |
| |
| target-module@90000 { /* 0x4a090000, ap 59 42.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "ocp2scp3"; |
| reg = <0x90000 0x4>, |
| <0x90010 0x4>, |
| <0x90014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ |
| clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x90000 0x8000>; |
| |
| ocp2scp@0 { |
| compatible = "ti,omap-ocp2scp"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x8000>; |
| reg = <0x0 0x20>; |
| |
| pcie1_phy: pciephy@4000 { |
| compatible = "ti,phy-pipe3-pcie"; |
| reg = <0x4000 0x80>, /* phy_rx */ |
| <0x4400 0x64>; /* phy_tx */ |
| reg-names = "phy_rx", "phy_tx"; |
| syscon-phy-power = <&scm_conf_pcie 0x1c>; |
| syscon-pcs = <&scm_conf_pcie 0x10>; |
| clocks = <&dpll_pcie_ref_ck>, |
| <&dpll_pcie_ref_m2ldo_ck>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>, |
| <&optfclk_pciephy_div>, |
| <&sys_clkin1>; |
| clock-names = "dpll_ref", "dpll_ref_m2", |
| "wkupclk", "refclk", |
| "div-clk", "phy-div", "sysclk"; |
| #phy-cells = <0>; |
| }; |
| |
| pcie2_phy: pciephy@5000 { |
| compatible = "ti,phy-pipe3-pcie"; |
| reg = <0x5000 0x80>, /* phy_rx */ |
| <0x5400 0x64>; /* phy_tx */ |
| reg-names = "phy_rx", "phy_tx"; |
| syscon-phy-power = <&scm_conf_pcie 0x20>; |
| syscon-pcs = <&scm_conf_pcie 0x10>; |
| clocks = <&dpll_pcie_ref_ck>, |
| <&dpll_pcie_ref_m2ldo_ck>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, |
| <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>, |
| <&optfclk_pciephy_div>, |
| <&sys_clkin1>; |
| clock-names = "dpll_ref", "dpll_ref_m2", |
| "wkupclk", "refclk", |
| "div-clk", "phy-div", "sysclk"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sata_phy: phy@6000 { |
| compatible = "ti,phy-pipe3-sata"; |
| reg = <0x6000 0x80>, /* phy_rx */ |
| <0x6400 0x64>, /* phy_tx */ |
| <0x6800 0x40>; /* pll_ctrl */ |
| reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| syscon-phy-power = <&scm_conf 0x374>; |
| clocks = <&sys_clkin1>, |
| <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; |
| clock-names = "sysclk", "refclk"; |
| syscon-pllreset = <&scm_conf 0x3fc>; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |
| |
| target-module@a0000 { /* 0x4a0a0000, ap 15 40.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa0000 0x8000>; |
| }; |
| |
| target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */ |
| compatible = "ti,sysc-omap4-sr", "ti,sysc"; |
| ti,hwmods = "smartreflex_mpu"; |
| reg = <0xd9038 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ |
| clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xd9000 0x1000>; |
| |
| /* SmartReflex child device marked reserved in TRM */ |
| }; |
| |
| target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */ |
| compatible = "ti,sysc-omap4-sr", "ti,sysc"; |
| ti,hwmods = "smartreflex_core"; |
| reg = <0xdd038 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ |
| clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xdd000 0x1000>; |
| |
| /* SmartReflex child device marked reserved in TRM */ |
| }; |
| |
| target-module@e0000 { /* 0x4a0e0000, ap 21 28.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0000 0x1000>; |
| }; |
| |
| target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mailbox1"; |
| reg = <0xf4000 0x4>, |
| <0xf4010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ |
| clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xf4000 0x1000>; |
| |
| mailbox1: mailbox@0 { |
| compatible = "ti,omap4-mailbox"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| ti,mbox-num-users = <3>; |
| ti,mbox-num-fifos = <8>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "spinlock"; |
| reg = <0xf6000 0x4>, |
| <0xf6010 0x4>, |
| <0xf6014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ |
| clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xf6000 0x1000>; |
| |
| hwspinlock: spinlock@0 { |
| compatible = "ti,omap4-hwspinlock"; |
| reg = <0x0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| }; |
| }; |
| |
| segment@100000 { /* 0x4a100000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ |
| <0x00003000 0x00103000 0x001000>, /* ap 28 */ |
| <0x00008000 0x00108000 0x001000>, /* ap 29 */ |
| <0x00009000 0x00109000 0x001000>, /* ap 30 */ |
| <0x00040000 0x00140000 0x010000>, /* ap 31 */ |
| <0x00050000 0x00150000 0x001000>, /* ap 32 */ |
| <0x00051000 0x00151000 0x001000>, /* ap 33 */ |
| <0x00052000 0x00152000 0x001000>, /* ap 34 */ |
| <0x00053000 0x00153000 0x001000>, /* ap 35 */ |
| <0x00054000 0x00154000 0x001000>, /* ap 36 */ |
| <0x00055000 0x00155000 0x001000>, /* ap 37 */ |
| <0x00056000 0x00156000 0x001000>, /* ap 38 */ |
| <0x00057000 0x00157000 0x001000>, /* ap 39 */ |
| <0x00058000 0x00158000 0x001000>, /* ap 40 */ |
| <0x0005b000 0x0015b000 0x001000>, /* ap 41 */ |
| <0x0005c000 0x0015c000 0x001000>, /* ap 42 */ |
| <0x0005d000 0x0015d000 0x001000>, /* ap 45 */ |
| <0x0005e000 0x0015e000 0x001000>, /* ap 46 */ |
| <0x0005f000 0x0015f000 0x001000>, /* ap 47 */ |
| <0x00060000 0x00160000 0x001000>, /* ap 48 */ |
| <0x00061000 0x00161000 0x001000>, /* ap 49 */ |
| <0x00062000 0x00162000 0x001000>, /* ap 50 */ |
| <0x00063000 0x00163000 0x001000>, /* ap 51 */ |
| <0x00064000 0x00164000 0x001000>, /* ap 52 */ |
| <0x00065000 0x00165000 0x001000>, /* ap 53 */ |
| <0x00066000 0x00166000 0x001000>, /* ap 54 */ |
| <0x00067000 0x00167000 0x001000>, /* ap 55 */ |
| <0x00068000 0x00168000 0x001000>, /* ap 56 */ |
| <0x0006d000 0x0016d000 0x001000>, /* ap 57 */ |
| <0x0006e000 0x0016e000 0x001000>, /* ap 58 */ |
| <0x00071000 0x00171000 0x001000>, /* ap 61 */ |
| <0x00072000 0x00172000 0x001000>, /* ap 62 */ |
| <0x00073000 0x00173000 0x001000>, /* ap 63 */ |
| <0x00074000 0x00174000 0x001000>, /* ap 64 */ |
| <0x00075000 0x00175000 0x001000>, /* ap 65 */ |
| <0x00076000 0x00176000 0x001000>, /* ap 66 */ |
| <0x00077000 0x00177000 0x001000>, /* ap 67 */ |
| <0x00078000 0x00178000 0x001000>, /* ap 68 */ |
| <0x00081000 0x00181000 0x001000>, /* ap 69 */ |
| <0x00082000 0x00182000 0x001000>, /* ap 70 */ |
| <0x00083000 0x00183000 0x001000>, /* ap 71 */ |
| <0x00084000 0x00184000 0x001000>, /* ap 72 */ |
| <0x00085000 0x00185000 0x001000>, /* ap 73 */ |
| <0x00086000 0x00186000 0x001000>, /* ap 74 */ |
| <0x00087000 0x00187000 0x001000>, /* ap 75 */ |
| <0x00088000 0x00188000 0x001000>, /* ap 76 */ |
| <0x00069000 0x00169000 0x001000>, /* ap 103 */ |
| <0x0006a000 0x0016a000 0x001000>, /* ap 104 */ |
| <0x00079000 0x00179000 0x001000>, /* ap 105 */ |
| <0x0007a000 0x0017a000 0x001000>, /* ap 106 */ |
| <0x0006b000 0x0016b000 0x001000>, /* ap 107 */ |
| <0x0006c000 0x0016c000 0x001000>, /* ap 108 */ |
| <0x0007b000 0x0017b000 0x001000>, /* ap 121 */ |
| <0x0007c000 0x0017c000 0x001000>, /* ap 122 */ |
| <0x0007d000 0x0017d000 0x001000>, /* ap 123 */ |
| <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ |
| <0x00059000 0x00159000 0x001000>, /* ap 125 */ |
| <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ |
| |
| target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2000 0x1000>; |
| }; |
| |
| target-module@8000 { /* 0x4a108000, ap 29 1e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x8000 0x1000>; |
| }; |
| |
| target-module@40000 { /* 0x4a140000, ap 31 06.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x40000 0x10000>; |
| }; |
| |
| target-module@51000 { /* 0x4a151000, ap 33 50.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x51000 0x1000>; |
| }; |
| |
| target-module@53000 { /* 0x4a153000, ap 35 54.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x53000 0x1000>; |
| }; |
| |
| target-module@55000 { /* 0x4a155000, ap 37 46.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x55000 0x1000>; |
| }; |
| |
| target-module@57000 { /* 0x4a157000, ap 39 58.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x57000 0x1000>; |
| }; |
| |
| target-module@59000 { /* 0x4a159000, ap 125 6a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x59000 0x1000>; |
| }; |
| |
| target-module@5b000 { /* 0x4a15b000, ap 41 60.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5b000 0x1000>; |
| }; |
| |
| target-module@5d000 { /* 0x4a15d000, ap 45 3a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5d000 0x1000>; |
| }; |
| |
| target-module@5f000 { /* 0x4a15f000, ap 47 56.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5f000 0x1000>; |
| }; |
| |
| target-module@61000 { /* 0x4a161000, ap 49 32.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x61000 0x1000>; |
| }; |
| |
| target-module@63000 { /* 0x4a163000, ap 51 5c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x63000 0x1000>; |
| }; |
| |
| target-module@65000 { /* 0x4a165000, ap 53 4e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x65000 0x1000>; |
| }; |
| |
| target-module@67000 { /* 0x4a167000, ap 55 5e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x67000 0x1000>; |
| }; |
| |
| target-module@69000 { /* 0x4a169000, ap 103 4a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x69000 0x1000>; |
| }; |
| |
| target-module@6b000 { /* 0x4a16b000, ap 107 52.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6b000 0x1000>; |
| }; |
| |
| target-module@6d000 { /* 0x4a16d000, ap 57 68.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6d000 0x1000>; |
| }; |
| |
| target-module@71000 { /* 0x4a171000, ap 61 48.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x71000 0x1000>; |
| }; |
| |
| target-module@73000 { /* 0x4a173000, ap 63 2a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x73000 0x1000>; |
| }; |
| |
| target-module@75000 { /* 0x4a175000, ap 65 64.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x75000 0x1000>; |
| }; |
| |
| target-module@77000 { /* 0x4a177000, ap 67 66.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x77000 0x1000>; |
| }; |
| |
| target-module@79000 { /* 0x4a179000, ap 105 34.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x79000 0x1000>; |
| }; |
| |
| target-module@7b000 { /* 0x4a17b000, ap 121 7c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7b000 0x1000>; |
| }; |
| |
| target-module@7d000 { /* 0x4a17d000, ap 123 7e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7d000 0x1000>; |
| }; |
| |
| target-module@81000 { /* 0x4a181000, ap 69 26.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x81000 0x1000>; |
| }; |
| |
| target-module@83000 { /* 0x4a183000, ap 71 2e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x83000 0x1000>; |
| }; |
| |
| target-module@85000 { /* 0x4a185000, ap 73 36.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x85000 0x1000>; |
| }; |
| |
| target-module@87000 { /* 0x4a187000, ap 75 74.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x87000 0x1000>; |
| }; |
| }; |
| |
| segment@200000 { /* 0x4a200000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ |
| <0x00019000 0x00219000 0x001000>, /* ap 44 */ |
| <0x00000000 0x00200000 0x001000>, /* ap 77 */ |
| <0x00001000 0x00201000 0x001000>, /* ap 78 */ |
| <0x0000a000 0x0020a000 0x001000>, /* ap 79 */ |
| <0x0000b000 0x0020b000 0x001000>, /* ap 80 */ |
| <0x0000c000 0x0020c000 0x001000>, /* ap 81 */ |
| <0x0000d000 0x0020d000 0x001000>, /* ap 82 */ |
| <0x0000e000 0x0020e000 0x001000>, /* ap 83 */ |
| <0x0000f000 0x0020f000 0x001000>, /* ap 84 */ |
| <0x00010000 0x00210000 0x001000>, /* ap 85 */ |
| <0x00011000 0x00211000 0x001000>, /* ap 86 */ |
| <0x00012000 0x00212000 0x001000>, /* ap 87 */ |
| <0x00013000 0x00213000 0x001000>, /* ap 88 */ |
| <0x00014000 0x00214000 0x001000>, /* ap 89 */ |
| <0x00015000 0x00215000 0x001000>, /* ap 90 */ |
| <0x0002a000 0x0022a000 0x001000>, /* ap 91 */ |
| <0x0002b000 0x0022b000 0x001000>, /* ap 92 */ |
| <0x0001c000 0x0021c000 0x001000>, /* ap 93 */ |
| <0x0001d000 0x0021d000 0x001000>, /* ap 94 */ |
| <0x0001e000 0x0021e000 0x001000>, /* ap 95 */ |
| <0x0001f000 0x0021f000 0x001000>, /* ap 96 */ |
| <0x00020000 0x00220000 0x001000>, /* ap 97 */ |
| <0x00021000 0x00221000 0x001000>, /* ap 98 */ |
| <0x00024000 0x00224000 0x001000>, /* ap 99 */ |
| <0x00025000 0x00225000 0x001000>, /* ap 100 */ |
| <0x00026000 0x00226000 0x001000>, /* ap 101 */ |
| <0x00027000 0x00227000 0x001000>, /* ap 102 */ |
| <0x0002c000 0x0022c000 0x001000>, /* ap 109 */ |
| <0x0002d000 0x0022d000 0x001000>, /* ap 110 */ |
| <0x0002e000 0x0022e000 0x001000>, /* ap 111 */ |
| <0x0002f000 0x0022f000 0x001000>, /* ap 112 */ |
| <0x00030000 0x00230000 0x001000>, /* ap 113 */ |
| <0x00031000 0x00231000 0x001000>, /* ap 114 */ |
| <0x00032000 0x00232000 0x001000>, /* ap 115 */ |
| <0x00033000 0x00233000 0x001000>, /* ap 116 */ |
| <0x00034000 0x00234000 0x001000>, /* ap 117 */ |
| <0x00035000 0x00235000 0x001000>, /* ap 118 */ |
| <0x00036000 0x00236000 0x001000>, /* ap 119 */ |
| <0x00037000 0x00237000 0x001000>, /* ap 120 */ |
| <0x0001a000 0x0021a000 0x001000>, /* ap 127 */ |
| <0x0001b000 0x0021b000 0x001000>; /* ap 128 */ |
| |
| target-module@0 { /* 0x4a200000, ap 77 3e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| }; |
| |
| target-module@a000 { /* 0x4a20a000, ap 79 30.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa000 0x1000>; |
| }; |
| |
| target-module@c000 { /* 0x4a20c000, ap 81 0c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc000 0x1000>; |
| }; |
| |
| target-module@e000 { /* 0x4a20e000, ap 83 22.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe000 0x1000>; |
| }; |
| |
| target-module@10000 { /* 0x4a210000, ap 85 14.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10000 0x1000>; |
| }; |
| |
| target-module@12000 { /* 0x4a212000, ap 87 16.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x12000 0x1000>; |
| }; |
| |
| target-module@14000 { /* 0x4a214000, ap 89 1c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x14000 0x1000>; |
| }; |
| |
| target-module@18000 { /* 0x4a218000, ap 43 12.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x18000 0x1000>; |
| }; |
| |
| target-module@1a000 { /* 0x4a21a000, ap 127 7a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1a000 0x1000>; |
| }; |
| |
| target-module@1c000 { /* 0x4a21c000, ap 93 38.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1c000 0x1000>; |
| }; |
| |
| target-module@1e000 { /* 0x4a21e000, ap 95 0a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1e000 0x1000>; |
| }; |
| |
| target-module@20000 { /* 0x4a220000, ap 97 24.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| }; |
| |
| target-module@24000 { /* 0x4a224000, ap 99 44.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x24000 0x1000>; |
| }; |
| |
| target-module@26000 { /* 0x4a226000, ap 101 2c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x26000 0x1000>; |
| }; |
| |
| target-module@2a000 { /* 0x4a22a000, ap 91 4c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2a000 0x1000>; |
| }; |
| |
| target-module@2c000 { /* 0x4a22c000, ap 109 6c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2c000 0x1000>; |
| }; |
| |
| target-module@2e000 { /* 0x4a22e000, ap 111 6e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2e000 0x1000>; |
| }; |
| |
| target-module@30000 { /* 0x4a230000, ap 113 70.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x30000 0x1000>; |
| }; |
| |
| target-module@32000 { /* 0x4a232000, ap 115 5a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x32000 0x1000>; |
| }; |
| |
| target-module@34000 { /* 0x4a234000, ap 117 76.1 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x34000 0x1000>; |
| }; |
| |
| target-module@36000 { /* 0x4a236000, ap 119 62.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x36000 0x1000>; |
| }; |
| }; |
| }; |
| |
| &l4_per1 { /* 0x48000000 */ |
| compatible = "ti,dra7-l4-per1", "simple-bus"; |
| reg = <0x48000000 0x800>, |
| <0x48000800 0x800>, |
| <0x48001000 0x400>, |
| <0x48001400 0x400>, |
| <0x48001800 0x400>, |
| <0x48001c00 0x400>; |
| reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ |
| <0x00200000 0x48200000 0x200000>; /* segment 1 */ |
| |
| segment@0 { /* 0x48000000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00001000 0x00001000 0x000400>, /* ap 1 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 2 */ |
| <0x00020000 0x00020000 0x001000>, /* ap 3 */ |
| <0x00021000 0x00021000 0x001000>, /* ap 4 */ |
| <0x00032000 0x00032000 0x001000>, /* ap 5 */ |
| <0x00033000 0x00033000 0x001000>, /* ap 6 */ |
| <0x00034000 0x00034000 0x001000>, /* ap 7 */ |
| <0x00035000 0x00035000 0x001000>, /* ap 8 */ |
| <0x00036000 0x00036000 0x001000>, /* ap 9 */ |
| <0x00037000 0x00037000 0x001000>, /* ap 10 */ |
| <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ |
| <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ |
| <0x00055000 0x00055000 0x001000>, /* ap 13 */ |
| <0x00056000 0x00056000 0x001000>, /* ap 14 */ |
| <0x00057000 0x00057000 0x001000>, /* ap 15 */ |
| <0x00058000 0x00058000 0x001000>, /* ap 16 */ |
| <0x00059000 0x00059000 0x001000>, /* ap 17 */ |
| <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ |
| <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ |
| <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ |
| <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ |
| <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ |
| <0x00060000 0x00060000 0x001000>, /* ap 23 */ |
| <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ |
| <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ |
| <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ |
| <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ |
| <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ |
| <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ |
| <0x00070000 0x00070000 0x001000>, /* ap 30 */ |
| <0x00071000 0x00071000 0x001000>, /* ap 31 */ |
| <0x00072000 0x00072000 0x001000>, /* ap 32 */ |
| <0x00073000 0x00073000 0x001000>, /* ap 33 */ |
| <0x00061000 0x00061000 0x001000>, /* ap 34 */ |
| <0x00053000 0x00053000 0x001000>, /* ap 35 */ |
| <0x00054000 0x00054000 0x001000>, /* ap 36 */ |
| <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ |
| <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ |
| <0x00078000 0x00078000 0x001000>, /* ap 39 */ |
| <0x00079000 0x00079000 0x001000>, /* ap 40 */ |
| <0x00086000 0x00086000 0x001000>, /* ap 41 */ |
| <0x00087000 0x00087000 0x001000>, /* ap 42 */ |
| <0x00088000 0x00088000 0x001000>, /* ap 43 */ |
| <0x00089000 0x00089000 0x001000>, /* ap 44 */ |
| <0x00051000 0x00051000 0x001000>, /* ap 45 */ |
| <0x00052000 0x00052000 0x001000>, /* ap 46 */ |
| <0x00098000 0x00098000 0x001000>, /* ap 47 */ |
| <0x00099000 0x00099000 0x001000>, /* ap 48 */ |
| <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ |
| <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ |
| <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ |
| <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ |
| <0x00068000 0x00068000 0x001000>, /* ap 53 */ |
| <0x00069000 0x00069000 0x001000>, /* ap 54 */ |
| <0x00090000 0x00090000 0x002000>, /* ap 55 */ |
| <0x00092000 0x00092000 0x001000>, /* ap 56 */ |
| <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ |
| <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ |
| <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ |
| <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ |
| <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ |
| <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ |
| <0x00066000 0x00066000 0x001000>, /* ap 63 */ |
| <0x00067000 0x00067000 0x001000>, /* ap 64 */ |
| <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ |
| <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ |
| <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ |
| <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ |
| <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ |
| <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ |
| <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ |
| <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ |
| <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ |
| <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ |
| <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ |
| <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ |
| <0x00001400 0x00001400 0x000400>, /* ap 77 */ |
| <0x00001800 0x00001800 0x000400>, /* ap 78 */ |
| <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ |
| <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ |
| <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ |
| <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ |
| <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ |
| <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ |
| |
| target-module@20000 { /* 0x48020000, ap 3 04.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart3"; |
| reg = <0x20050 0x4>, |
| <0x20054 0x4>, |
| <0x20058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| |
| uart3: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@32000 { /* 0x48032000, ap 5 3e.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer2"; |
| reg = <0x32000 0x4>, |
| <0x32010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x32000 0x1000>; |
| |
| timer2: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@34000 { /* 0x48034000, ap 7 46.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer3"; |
| reg = <0x34000 0x4>, |
| <0x34010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x34000 0x1000>; |
| |
| timer3: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@36000 { /* 0x48036000, ap 9 4e.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer4"; |
| reg = <0x36000 0x4>, |
| <0x36010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x36000 0x1000>; |
| |
| timer4: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer9"; |
| reg = <0x3e000 0x4>, |
| <0x3e010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x3e000 0x1000>; |
| |
| timer9: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@51000 { /* 0x48051000, ap 45 2e.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio7"; |
| reg = <0x51000 0x4>, |
| <0x51010 0x4>, |
| <0x51114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x51000 0x1000>; |
| |
| gpio7: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@53000 { /* 0x48053000, ap 35 36.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio8"; |
| reg = <0x53000 0x4>, |
| <0x53010 0x4>, |
| <0x53114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x53000 0x1000>; |
| |
| gpio8: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@55000 { /* 0x48055000, ap 13 0e.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio2"; |
| reg = <0x55000 0x4>, |
| <0x55010 0x4>, |
| <0x55114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x55000 0x1000>; |
| |
| gpio2: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@57000 { /* 0x48057000, ap 15 06.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio3"; |
| reg = <0x57000 0x4>, |
| <0x57010 0x4>, |
| <0x57114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x57000 0x1000>; |
| |
| gpio3: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@59000 { /* 0x48059000, ap 17 16.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio4"; |
| reg = <0x59000 0x4>, |
| <0x59010 0x4>, |
| <0x59114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x59000 0x1000>; |
| |
| gpio4: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio5"; |
| reg = <0x5b000 0x4>, |
| <0x5b010 0x4>, |
| <0x5b114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5b000 0x1000>; |
| |
| gpio5: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "gpio6"; |
| reg = <0x5d000 0x4>, |
| <0x5d010 0x4>, |
| <0x5d114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>, |
| <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5d000 0x1000>; |
| |
| gpio6: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@60000 { /* 0x48060000, ap 23 32.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "i2c3"; |
| reg = <0x60000 0x8>, |
| <0x60010 0x8>, |
| <0x60090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x60000 0x1000>; |
| |
| i2c3: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@66000 { /* 0x48066000, ap 63 14.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart5"; |
| reg = <0x66050 0x4>, |
| <0x66054 0x4>, |
| <0x66058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x66000 0x1000>; |
| |
| uart5: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@68000 { /* 0x48068000, ap 53 1c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart6"; |
| reg = <0x68050 0x4>, |
| <0x68054 0x4>, |
| <0x68058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ |
| clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x68000 0x1000>; |
| |
| uart6: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@6a000 { /* 0x4806a000, ap 24 24.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart1"; |
| reg = <0x6a050 0x4>, |
| <0x6a054 0x4>, |
| <0x6a058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6a000 0x1000>; |
| |
| uart1: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart2"; |
| reg = <0x6c050 0x4>, |
| <0x6c054 0x4>, |
| <0x6c058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6c000 0x1000>; |
| |
| uart2: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart4"; |
| reg = <0x6e050 0x4>, |
| <0x6e054 0x4>, |
| <0x6e058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6e000 0x1000>; |
| |
| uart4: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@70000 { /* 0x48070000, ap 30 22.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "i2c1"; |
| reg = <0x70000 0x8>, |
| <0x70010 0x8>, |
| <0x70090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x70000 0x1000>; |
| |
| i2c1: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@72000 { /* 0x48072000, ap 32 2a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "i2c2"; |
| reg = <0x72000 0x8>, |
| <0x72010 0x8>, |
| <0x72090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x72000 0x1000>; |
| |
| i2c2: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@78000 { /* 0x48078000, ap 39 0a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "elm"; |
| reg = <0x78000 0x4>, |
| <0x78010 0x4>, |
| <0x78014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x78000 0x1000>; |
| |
| elm: elm@0 { |
| compatible = "ti,am3352-elm"; |
| reg = <0x0 0xfc0>; /* device IO registers */ |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "i2c4"; |
| reg = <0x7a000 0x8>, |
| <0x7a010 0x8>, |
| <0x7a090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7a000 0x1000>; |
| |
| i2c4: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "i2c5"; |
| reg = <0x7c000 0x8>, |
| <0x7c010 0x8>, |
| <0x7c090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ |
| clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7c000 0x1000>; |
| |
| i2c5: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@86000 { /* 0x48086000, ap 41 5e.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer10"; |
| reg = <0x86000 0x4>, |
| <0x86010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x86000 0x1000>; |
| |
| timer10: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@88000 { /* 0x48088000, ap 43 66.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| ti,hwmods = "timer11"; |
| reg = <0x88000 0x4>, |
| <0x88010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x88000 0x1000>; |
| |
| timer11: timer@0 { |
| compatible = "ti,omap5430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@90000 { /* 0x48090000, ap 55 12.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "rng"; |
| reg = <0x91fe0 0x4>, |
| <0x91fe4 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>; |
| /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ |
| clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x90000 0x2000>; |
| |
| rng: rng@0 { |
| compatible = "ti,omap4-rng"; |
| reg = <0x0 0x2000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&l3_iclk_div>; |
| clock-names = "fck"; |
| }; |
| }; |
| |
| target-module@98000 { /* 0x48098000, ap 47 08.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mcspi1"; |
| reg = <0x98000 0x4>, |
| <0x98010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x98000 0x1000>; |
| |
| mcspi1: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <4>; |
| dmas = <&sdma_xbar 35>, |
| <&sdma_xbar 36>, |
| <&sdma_xbar 37>, |
| <&sdma_xbar 38>, |
| <&sdma_xbar 39>, |
| <&sdma_xbar 40>, |
| <&sdma_xbar 41>, |
| <&sdma_xbar 42>; |
| dma-names = "tx0", "rx0", "tx1", "rx1", |
| "tx2", "rx2", "tx3", "rx3"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mcspi2"; |
| reg = <0x9a000 0x4>, |
| <0x9a010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x9a000 0x1000>; |
| |
| mcspi2: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <2>; |
| dmas = <&sdma_xbar 43>, |
| <&sdma_xbar 44>, |
| <&sdma_xbar 45>, |
| <&sdma_xbar 46>; |
| dma-names = "tx0", "rx0", "tx1", "rx1"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@9c000 { /* 0x4809c000, ap 51 38.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mmc1"; |
| reg = <0x9c000 0x4>, |
| <0x9c010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ |
| clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x9c000 0x1000>; |
| |
| mmc1: mmc@0 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| pbias-supply = <&pbias_mmc_reg>; |
| max-frequency = <192000000>; |
| mmc-ddr-1_8v; |
| mmc-ddr-3_3v; |
| }; |
| }; |
| |
| target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa2000 0x1000>; |
| }; |
| |
| target-module@a4000 { /* 0x480a4000, ap 57 42.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x000a4000 0x00001000>, |
| <0x00001000 0x000a5000 0x00001000>; |
| }; |
| |
| target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa8000 0x4000>; |
| }; |
| |
| target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mmc3"; |
| reg = <0xad000 0x4>, |
| <0xad010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xad000 0x1000>; |
| |
| mmc3: mmc@0 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ |
| max-frequency = <64000000>; |
| /* SDMA is not supported */ |
| sdhci-caps-mask = <0x0 0x400000>; |
| }; |
| }; |
| |
| target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "hdq1w"; |
| reg = <0xb2000 0x4>, |
| <0xb2014 0x4>, |
| <0xb2018 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,syss-mask = <1>; |
| ti,no-reset-on-init; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb2000 0x1000>; |
| |
| hdqw1w: 1w@0 { |
| compatible = "ti,omap3-1w"; |
| reg = <0x0 0x1000>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@b4000 { /* 0x480b4000, ap 65 40.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mmc2"; |
| reg = <0xb4000 0x4>, |
| <0xb4010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ |
| clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb4000 0x1000>; |
| |
| mmc2: mmc@0 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| max-frequency = <192000000>; |
| /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ |
| sdhci-caps-mask = <0x7 0x0>; |
| mmc-hs200-1_8v; |
| mmc-ddr-1_8v; |
| mmc-ddr-3_3v; |
| }; |
| }; |
| |
| target-module@b8000 { /* 0x480b8000, ap 67 48.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mcspi3"; |
| reg = <0xb8000 0x4>, |
| <0xb8010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb8000 0x1000>; |
| |
| mcspi3: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <2>; |
| dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; |
| dma-names = "tx0", "rx0"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mcspi4"; |
| reg = <0xba000 0x4>, |
| <0xba010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xba000 0x1000>; |
| |
| mcspi4: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <1>; |
| dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; |
| dma-names = "tx0", "rx0"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "mmc4"; |
| reg = <0xd1000 0x4>, |
| <0xd1010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ |
| clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xd1000 0x1000>; |
| |
| mmc4: mmc@0 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| max-frequency = <192000000>; |
| /* SDMA is not supported */ |
| sdhci-caps-mask = <0x0 0x400000>; |
| }; |
| }; |
| |
| target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xd5000 0x1000>; |
| }; |
| }; |
| |
| segment@200000 { /* 0x48200000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| }; |
| |
| &l4_per2 { /* 0x48400000 */ |
| compatible = "ti,dra7-l4-per2", "simple-bus"; |
| reg = <0x48400000 0x800>, |
| <0x48400800 0x800>, |
| <0x48401000 0x400>, |
| <0x48401400 0x400>, |
| <0x48401800 0x400>; |
| reg-names = "ap", "la", "ia0", "ia1", "ia2"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x48400000 0x400000>, /* segment 0 */ |
| <0x45800000 0x45800000 0x400000>, /* L3 data port */ |
| <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ |
| <0x46000000 0x46000000 0x400000>, /* L3 data port */ |
| <0x48436000 0x48436000 0x400000>, /* L3 data port */ |
| <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ |
| <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ |
| <0x48450000 0x48450000 0x400000>, /* L3 data port */ |
| <0x48454000 0x48454000 0x400000>; /* L3 data port */ |
| |
| segment@0 { /* 0x48400000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00001000 0x00001000 0x000400>, /* ap 1 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 2 */ |
| <0x00084000 0x00084000 0x004000>, /* ap 3 */ |
| <0x00001400 0x00001400 0x000400>, /* ap 4 */ |
| <0x00001800 0x00001800 0x000400>, /* ap 5 */ |
| <0x00088000 0x00088000 0x001000>, /* ap 6 */ |
| <0x0002c000 0x0002c000 0x001000>, /* ap 7 */ |
| <0x0002d000 0x0002d000 0x001000>, /* ap 8 */ |
| <0x00060000 0x00060000 0x002000>, /* ap 9 */ |
| <0x00062000 0x00062000 0x001000>, /* ap 10 */ |
| <0x00064000 0x00064000 0x002000>, /* ap 11 */ |
| <0x00066000 0x00066000 0x001000>, /* ap 12 */ |
| <0x00068000 0x00068000 0x002000>, /* ap 13 */ |
| <0x0006a000 0x0006a000 0x001000>, /* ap 14 */ |
| <0x0006c000 0x0006c000 0x002000>, /* ap 15 */ |
| <0x0006e000 0x0006e000 0x001000>, /* ap 16 */ |
| <0x00036000 0x00036000 0x001000>, /* ap 17 */ |
| <0x00037000 0x00037000 0x001000>, /* ap 18 */ |
| <0x00070000 0x00070000 0x002000>, /* ap 19 */ |
| <0x00072000 0x00072000 0x001000>, /* ap 20 */ |
| <0x0003a000 0x0003a000 0x001000>, /* ap 21 */ |
| <0x0003b000 0x0003b000 0x001000>, /* ap 22 */ |
| <0x0003c000 0x0003c000 0x001000>, /* ap 23 */ |
| <0x0003d000 0x0003d000 0x001000>, /* ap 24 */ |
| <0x0003e000 0x0003e000 0x001000>, /* ap 25 */ |
| <0x0003f000 0x0003f000 0x001000>, /* ap 26 */ |
| <0x00040000 0x00040000 0x001000>, /* ap 27 */ |
| <0x00041000 0x00041000 0x001000>, /* ap 28 */ |
| <0x00042000 0x00042000 0x001000>, /* ap 29 */ |
| <0x00043000 0x00043000 0x001000>, /* ap 30 */ |
| <0x00080000 0x00080000 0x002000>, /* ap 31 */ |
| <0x00082000 0x00082000 0x001000>, /* ap 32 */ |
| <0x0004a000 0x0004a000 0x001000>, /* ap 33 */ |
| <0x0004b000 0x0004b000 0x001000>, /* ap 34 */ |
| <0x00074000 0x00074000 0x002000>, /* ap 35 */ |
| <0x00076000 0x00076000 0x001000>, /* ap 36 */ |
| <0x00050000 0x00050000 0x001000>, /* ap 37 */ |
| <0x00051000 0x00051000 0x001000>, /* ap 38 */ |
| <0x00078000 0x00078000 0x002000>, /* ap 39 */ |
| <0x0007a000 0x0007a000 0x001000>, /* ap 40 */ |
| <0x00054000 0x00054000 0x001000>, /* ap 41 */ |
| <0x00055000 0x00055000 0x001000>, /* ap 42 */ |
| <0x0007c000 0x0007c000 0x002000>, /* ap 43 */ |
| <0x0007e000 0x0007e000 0x001000>, /* ap 44 */ |
| <0x0004c000 0x0004c000 0x001000>, /* ap 45 */ |
| <0x0004d000 0x0004d000 0x001000>, /* ap 46 */ |
| <0x00020000 0x00020000 0x001000>, /* ap 47 */ |
| <0x00021000 0x00021000 0x001000>, /* ap 48 */ |
| <0x00022000 0x00022000 0x001000>, /* ap 49 */ |
| <0x00023000 0x00023000 0x001000>, /* ap 50 */ |
| <0x00024000 0x00024000 0x001000>, /* ap 51 */ |
| <0x00025000 0x00025000 0x001000>, /* ap 52 */ |
| <0x00046000 0x00046000 0x001000>, /* ap 53 */ |
| <0x00047000 0x00047000 0x001000>, /* ap 54 */ |
| <0x00048000 0x00048000 0x001000>, /* ap 55 */ |
| <0x00049000 0x00049000 0x001000>, /* ap 56 */ |
| <0x00058000 0x00058000 0x002000>, /* ap 57 */ |
| <0x0005a000 0x0005a000 0x001000>, /* ap 58 */ |
| <0x0005b000 0x0005b000 0x001000>, /* ap 59 */ |
| <0x0005c000 0x0005c000 0x001000>, /* ap 60 */ |
| <0x0005d000 0x0005d000 0x001000>, /* ap 61 */ |
| <0x0005e000 0x0005e000 0x001000>, /* ap 62 */ |
| <0x45800000 0x45800000 0x400000>, /* L3 data port */ |
| <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ |
| <0x46000000 0x46000000 0x400000>, /* L3 data port */ |
| <0x48436000 0x48436000 0x400000>, /* L3 data port */ |
| <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ |
| <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ |
| <0x48450000 0x48450000 0x400000>, /* L3 data port */ |
| <0x48454000 0x48454000 0x400000>; /* L3 data port */ |
| |
| target-module@20000 { /* 0x48420000, ap 47 02.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart7"; |
| reg = <0x20050 0x4>, |
| <0x20054 0x4>, |
| <0x20058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| |
| uart7: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@22000 { /* 0x48422000, ap 49 0a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart8"; |
| reg = <0x22050 0x4>, |
| <0x22054 0x4>, |
| <0x22058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x22000 0x1000>; |
| |
| uart8: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@24000 { /* 0x48424000, ap 51 12.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "uart9"; |
| reg = <0x24050 0x4>, |
| <0x24054 0x4>, |
| <0x24058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x24000 0x1000>; |
| |
| uart9: serial@0 { |
| compatible = "ti,dra742-uart", "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@2c000 { /* 0x4842c000, ap 7 18.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2c000 0x1000>; |
| }; |
| |
| target-module@36000 { /* 0x48436000, ap 17 06.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x36000 0x1000>; |
| }; |
| |
| target-module@3a000 { /* 0x4843a000, ap 21 3e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x3a000 0x1000>; |
| }; |
| |
| target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x3c000 0x4>; |
| reg-names = "rev"; |
| clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x3c000 0x1000>; |
| |
| atl: atl@0 { |
| compatible = "ti,dra7-atl"; |
| reg = <0x0 0x3ff>; |
| ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, |
| <&atl_clkin2_ck>, <&atl_clkin3_ck>; |
| clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@3e000 { /* 0x4843e000, ap 25 30.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "epwmss0"; |
| reg = <0x3e000 0x4>, |
| <0x3e004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x3e000 0x1000>; |
| |
| epwmss0: epwmss@0 { |
| compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; |
| reg = <0x0 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| ranges = <0 0 0x1000>; |
| |
| ecap0: ecap@100 { |
| compatible = "ti,dra746-ecap", |
| "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x100 0x80>; |
| clocks = <&l4_root_clk_div>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| ehrpwm0: pwm@200 { |
| compatible = "ti,dra746-ehrpwm", |
| "ti,am3352-ehrpwm"; |
| #pwm-cells = <3>; |
| reg = <0x200 0x80>; |
| clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; |
| clock-names = "tbclk", "fck"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| target-module@40000 { /* 0x48440000, ap 27 38.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "epwmss1"; |
| reg = <0x40000 0x4>, |
| <0x40004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x40000 0x1000>; |
| |
| epwmss1: epwmss@0 { |
| compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; |
| reg = <0x0 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| ranges = <0 0 0x1000>; |
| |
| ecap1: ecap@100 { |
| compatible = "ti,dra746-ecap", |
| "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x100 0x80>; |
| clocks = <&l4_root_clk_div>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| ehrpwm1: pwm@200 { |
| compatible = "ti,dra746-ehrpwm", |
| "ti,am3352-ehrpwm"; |
| #pwm-cells = <3>; |
| reg = <0x200 0x80>; |
| clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; |
| clock-names = "tbclk", "fck"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| target-module@42000 { /* 0x48442000, ap 29 20.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "epwmss2"; |
| reg = <0x42000 0x4>, |
| <0x42004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x42000 0x1000>; |
| |
| epwmss2: epwmss@0 { |
| compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; |
| reg = <0x0 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| ranges = <0 0 0x1000>; |
| |
| ecap2: ecap@100 { |
| compatible = "ti,dra746-ecap", |
| "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x100 0x80>; |
| clocks = <&l4_root_clk_div>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| ehrpwm2: pwm@200 { |
| compatible = "ti,dra746-ehrpwm", |
| "ti,am3352-ehrpwm"; |
| #pwm-cells = <3>; |
| reg = <0x200 0x80>; |
| clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; |
| clock-names = "tbclk", "fck"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| target-module@46000 { /* 0x48446000, ap 53 40.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x46000 0x1000>; |
| }; |
| |
| target-module@48000 { /* 0x48448000, ap 55 48.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x48000 0x1000>; |
| }; |
| |
| target-module@4a000 { /* 0x4844a000, ap 33 1a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4a000 0x1000>; |
| }; |
| |
| target-module@4c000 { /* 0x4844c000, ap 45 1c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4c000 0x1000>; |
| }; |
| |
| target-module@50000 { /* 0x48450000, ap 37 24.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x50000 0x1000>; |
| }; |
| |
| target-module@54000 { /* 0x48454000, ap 41 2c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x54000 0x1000>; |
| }; |
| |
| target-module@58000 { /* 0x48458000, ap 57 28.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x58000 0x2000>; |
| }; |
| |
| target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5b000 0x1000>; |
| }; |
| |
| target-module@5d000 { /* 0x4845d000, ap 61 22.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5d000 0x1000>; |
| }; |
| |
| target-module@60000 { /* 0x48460000, ap 9 0e.0 */ |
| compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; |
| ti,hwmods = "mcasp1"; |
| reg = <0x60000 0x4>, |
| <0x60004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ |
| clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, |
| <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, |
| <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; |
| clock-names = "fck", "ahclkx", "ahclkr"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x60000 0x2000>, |
| <0x45800000 0x45800000 0x400000>; |
| |
| mcasp1: mcasp@0 { |
| compatible = "ti,dra7-mcasp-audio"; |
| reg = <0x0 0x2000>, |
| <0x45800000 0x1000>; /* L3 data port */ |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; |
| dma-names = "tx", "rx"; |
| clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, |
| <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, |
| <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; |
| clock-names = "fck", "ahclkx", "ahclkr"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@64000 { /* 0x48464000, ap 11 1e.0 */ |
| compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; |
| ti,hwmods = "mcasp2"; |
| reg = <0x64000 0x4>, |
| <0x64004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; |
| clock-names = "fck", "ahclkx", "ahclkr"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x64000 0x2000>, |
| <0x45c00000 0x45c00000 0x400000>; |
| |
| mcasp2: mcasp@0 { |
| compatible = "ti,dra7-mcasp-audio"; |
| reg = <0x0 0x2000>, |
| <0x45c00000 0x1000>; /* L3 data port */ |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; |
| dma-names = "tx", "rx"; |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; |
| clock-names = "fck", "ahclkx", "ahclkr"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@68000 { /* 0x48468000, ap 13 26.0 */ |
| compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; |
| ti,hwmods = "mcasp3"; |
| reg = <0x68000 0x4>, |
| <0x68004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; |
| clock-names = "fck", "ahclkx", "ahclkr"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x68000 0x2000>, |
| <0x46000000 0x46000000 0x400000>; |
| |
| mcasp3: mcasp@0 { |
| compatible = "ti,dra7-mcasp-audio"; |
| reg = <0x0 0x2000>, |
| <0x46000000 0x1000>; /* L3 data port */ |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; |
| dma-names = "tx", "rx"; |
| clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, |
| <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; |
| clock-names = "fck", "ahclkx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */ |
| compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; |
| ti,hwmods = "mcasp4"; |
| reg = <0x6c000 0x4>, |
| <0x6c004 0x4>; |
|