| /* |
| * Copyright (c) 2016 BayLibre, Inc. |
| * |
| * Licensed under GPLv2. |
| */ |
| /dts-v1/; |
| #include "da850.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "DA850/AM1808/OMAP-L138 LCDK"; |
| compatible = "ti,da850-lcdk", "ti,da850"; |
| |
| aliases { |
| serial2 = &serial2; |
| ethernet0 = ð0; |
| }; |
| |
| chosen { |
| stdout-path = "serial2:115200n8"; |
| }; |
| |
| memory@c0000000 { |
| /* 128 MB DDR2 SDRAM @ 0xc0000000 */ |
| reg = <0xc0000000 0x08000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dsp_memory_region: dsp-memory@c3000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0xc3000000 0x1000000>; |
| reusable; |
| status = "okay"; |
| }; |
| }; |
| |
| vcc_5vd: fixedregulator-vcc_5vd { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_5vd"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| }; |
| |
| vcc_3v3d: fixedregulator-vcc_3v3d { |
| /* TPS650250 - VDCDC1 */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_3v3d"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc_5vd>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vcc_1v8d: fixedregulator-vcc_1v8d { |
| /* TPS650250 - VDCDC2 */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_1v8d"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_5vd>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "DA850-OMAPL138 LCDK"; |
| simple-audio-card,widgets = |
| "Line", "Line In", |
| "Line", "Line Out", |
| "Microphone", "Mic Jack"; |
| simple-audio-card,routing = |
| "LINE1L", "Line In", |
| "LINE1R", "Line In", |
| "Line Out", "LLOUT", |
| "Line Out", "RLOUT", |
| "MIC3L", "Mic Jack", |
| "MIC3R", "Mic Jack", |
| "Mic Jack", "Mic Bias"; |
| simple-audio-card,format = "dsp_b"; |
| simple-audio-card,bitclock-master = <&link0_codec>; |
| simple-audio-card,frame-master = <&link0_codec>; |
| simple-audio-card,bitclock-inversion; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&mcasp0>; |
| system-clock-frequency = <24576000>; |
| }; |
| |
| link0_codec: simple-audio-card,codec { |
| sound-dai = <&tlv320aic3106>; |
| system-clock-frequency = <24576000>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| autorepeat; |
| |
| user1 { |
| label = "GPIO Key USER1"; |
| linux,code = <BTN_0>; |
| gpios = <&gpio 36 GPIO_ACTIVE_LOW>; |
| }; |
| |
| user2 { |
| label = "GPIO Key USER2"; |
| linux,code = <BTN_1>; |
| gpios = <&gpio 37 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| vga-bridge { |
| compatible = "ti,ths8135"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| vga_bridge_in: endpoint { |
| remote-endpoint = <&lcdc_out_vga>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| vga_bridge_out: endpoint { |
| remote-endpoint = <&vga_con_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| vga { |
| compatible = "vga-connector"; |
| |
| ddc-i2c-bus = <&i2c0>; |
| |
| port { |
| vga_con_in: endpoint { |
| remote-endpoint = <&vga_bridge_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ref_clk { |
| clock-frequency = <24000000>; |
| }; |
| |
| &pmx_core { |
| status = "okay"; |
| |
| mcasp0_pins: pinmux_mcasp0_pins { |
| pinctrl-single,bits = < |
| /* AHCLKX AFSX ACLKX */ |
| 0x00 0x00101010 0x00f0f0f0 |
| /* ARX13 ARX14 */ |
| 0x04 0x00000110 0x00000ff0 |
| >; |
| }; |
| |
| nand_pins: nand_pins { |
| pinctrl-single,bits = < |
| /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */ |
| 0x1c 0x10110010 0xf0ff00f0 |
| /* |
| * EMA_D[0], EMA_D[1], EMA_D[2], |
| * EMA_D[3], EMA_D[4], EMA_D[5], |
| * EMA_D[6], EMA_D[7] |
| */ |
| 0x24 0x11111111 0xffffffff |
| /* |
| * EMA_D[8], EMA_D[9], EMA_D[10], |
| * EMA_D[11], EMA_D[12], EMA_D[13], |
| * EMA_D[14], EMA_D[15] |
| */ |
| 0x20 0x11111111 0xffffffff |
| /* EMA_A[1], EMA_A[2] */ |
| 0x30 0x01100000 0x0ff00000 |
| >; |
| }; |
| }; |
| |
| &serial2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&serial2_rxtx_pins>; |
| status = "okay"; |
| }; |
| |
| &wdt { |
| status = "okay"; |
| }; |
| |
| &rtc0 { |
| status = "okay"; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| }; |
| |
| &sata_refclk { |
| status = "okay"; |
| clock-frequency = <100000000>; |
| }; |
| |
| &sata { |
| status = "okay"; |
| }; |
| |
| &mdio { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mdio_pins>; |
| bus_freq = <2200000>; |
| status = "okay"; |
| }; |
| |
| ð0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mii_pins>; |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| max-frequency = <50000000>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| tlv320aic3106: tlv320aic3106@18 { |
| #sound-dai-cells = <0>; |
| compatible = "ti,tlv320aic3106"; |
| reg = <0x18>; |
| adc-settle-ms = <40>; |
| ai3x-micbias-vg = <1>; /* 2.0V */ |
| status = "okay"; |
| |
| /* Regulators */ |
| IOVDD-supply = <&vcc_3v3d>; |
| AVDD-supply = <&vcc_3v3d>; |
| DRVDD-supply = <&vcc_3v3d>; |
| DVDD-supply = <&vcc_1v8d>; |
| }; |
| }; |
| |
| &mcasp0 { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcasp0_pins>; |
| status = "okay"; |
| |
| op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ |
| tdm-slots = <2>; |
| serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 0 0 0 0 |
| 0 0 0 0 |
| 0 0 0 0 |
| 0 1 2 0 |
| >; |
| tx-num-evt = <32>; |
| rx-num-evt = <32>; |
| }; |
| |
| &usb_phy { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| }; |
| |
| &aemif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nand_pins>; |
| status = "okay"; |
| cs3 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| clock-ranges; |
| ranges; |
| |
| ti,cs-chipselect = <3>; |
| |
| nand@2000000,0 { |
| compatible = "ti,davinci-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x02000000 0x02000000 |
| 1 0x00000000 0x00008000>; |
| |
| ti,davinci-chipselect = <1>; |
| ti,davinci-mask-ale = <0>; |
| ti,davinci-mask-cle = <0>; |
| ti,davinci-mask-chipsel = <0>; |
| |
| ti,davinci-nand-buswidth = <16>; |
| ti,davinci-ecc-mode = "hw"; |
| ti,davinci-ecc-bits = <4>; |
| ti,davinci-nand-use-bbt; |
| |
| /* |
| * The OMAP-L132/L138 Bootloader doc SPRAB41E reads: |
| * "To boot from NAND Flash, the AIS should be written |
| * to NAND block 1 (NAND block 0 is not used by default)". |
| * The same doc mentions that for ROM "Silicon Revision 2.1", |
| * "Updated NAND boot mode to offer boot from block 0 or block 1". |
| * However the limitaion is left here by default for compatibility |
| * with older silicon and because it needs new boot pin settings |
| * not possible in stock LCDK. |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot env"; |
| reg = <0 0x020000>; |
| }; |
| partition@20000 { |
| /* The LCDK defaults to booting from this partition */ |
| label = "u-boot"; |
| reg = <0x020000 0x080000>; |
| }; |
| partition@a0000 { |
| label = "free space"; |
| reg = <0x0a0000 0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &prictrl { |
| status = "okay"; |
| }; |
| |
| &memctrl { |
| status = "okay"; |
| }; |
| |
| &lcdc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lcd_pins>; |
| |
| port { |
| lcdc_out_vga: endpoint { |
| remote-endpoint = <&vga_bridge_in>; |
| }; |
| }; |
| }; |
| |
| &vpif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vpif_capture_pins>; |
| status = "okay"; |
| }; |
| |
| &dsp { |
| memory-region = <&dsp_memory_region>; |
| status = "okay"; |
| }; |