| /* |
| * BSD LICENSE |
| * |
| * Copyright(c) 2016 Broadcom. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /dts-v1/; |
| |
| #include "bcm-nsp.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "NorthStar Plus SVK (BCM958623HR)"; |
| compatible = "brcm,bcm58623", "brcm,nsp"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x60000000 0x80000000>; |
| }; |
| |
| gpio-restart { |
| compatible = "gpio-restart"; |
| gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; |
| open-source; |
| priority = <200>; |
| }; |
| }; |
| |
| /* USB 3 and SLIC support needed to be complete */ |
| |
| &amac0 { |
| status = "okay"; |
| }; |
| |
| &amac1 { |
| status = "okay"; |
| }; |
| |
| &amac2 { |
| status = "okay"; |
| }; |
| |
| &ehci0 { |
| status = "okay"; |
| }; |
| |
| &nand { |
| nandcs@0 { |
| compatible = "brcm,nandcs"; |
| reg = <0>; |
| nand-on-flash-bbt; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| nand-ecc-strength = <24>; |
| nand-ecc-step-size = <1024>; |
| |
| brcm,nand-oob-sector-size = <27>; |
| |
| partition@0 { |
| label = "nboot"; |
| reg = <0x00000000 0x00200000>; |
| read-only; |
| }; |
| partition@200000 { |
| label = "nenv"; |
| reg = <0x00200000 0x00400000>; |
| }; |
| partition@600000 { |
| label = "nsystem"; |
| reg = <0x00600000 0x00a00000>; |
| }; |
| partition@1000000 { |
| label = "nrootfs"; |
| reg = <0x01000000 0x03000000>; |
| }; |
| partition@4000000 { |
| label = "ncustfs"; |
| reg = <0x04000000 0x3c000000>; |
| }; |
| }; |
| }; |
| |
| &ohci0 { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nand_sel>; |
| nand_sel: nand_sel { |
| function = "nand"; |
| groups = "nand_grp"; |
| }; |
| }; |
| |
| &sata_phy0 { |
| status = "okay"; |
| }; |
| |
| &qspi { |
| bspi-sel = <0>; |
| flash: m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "m25p80"; |
| reg = <0x0>; |
| spi-max-frequency = <12500000>; |
| m25p,fast-read; |
| spi-cpol; |
| spi-cpha; |
| |
| partition@0 { |
| label = "boot"; |
| reg = <0x00000000 0x000a0000>; |
| }; |
| |
| partition@a0000 { |
| label = "env"; |
| reg = <0x000a0000 0x00060000>; |
| }; |
| |
| partition@100000 { |
| label = "system"; |
| reg = <0x00100000 0x00600000>; |
| }; |
| |
| partition@700000 { |
| label = "rootfs"; |
| reg = <0x00700000 0x01900000>; |
| }; |
| }; |
| }; |
| |
| &srab { |
| compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; |
| status = "okay"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| label = "port0"; |
| reg = <0>; |
| }; |
| |
| port@1 { |
| label = "port1"; |
| reg = <1>; |
| }; |
| |
| port@2 { |
| label = "port2"; |
| reg = <2>; |
| }; |
| |
| port@3 { |
| label = "port3"; |
| reg = <3>; |
| }; |
| |
| port@4 { |
| label = "port4"; |
| reg = <4>; |
| }; |
| |
| port@8 { |
| ethernet = <&amac2>; |
| label = "cpu"; |
| reg = <8>; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &usb3_phy { |
| status = "okay"; |
| }; |
| |
| &xhci { |
| status = "okay"; |
| }; |