| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Broadcom BCM470X / BCM5301X ARM platform code. |
| * DTS for D-Link DIR-885L |
| * |
| * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "bcm47094.dtsi" |
| #include "bcm5301x-nand-cs0-bch1.dtsi" |
| |
| / { |
| compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; |
| model = "D-Link DIR-885L"; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200 earlycon"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x08000000 |
| 0x88000000 0x08000000>; |
| }; |
| |
| nand: nand@18028000 { |
| nandcs@0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "firmware"; |
| reg = <0x00000000 0x08000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| power-white { |
| label = "bcm53xx:white:power"; |
| gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| wan-white { |
| label = "bcm53xx:white:wan"; |
| gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; |
| }; |
| |
| power-amber { |
| label = "bcm53xx:amber:power"; |
| gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wan-amber { |
| label = "bcm53xx:amber:wan"; |
| gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; |
| }; |
| |
| usb3-white { |
| label = "bcm53xx:white:usb3"; |
| gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>, |
| <&xhci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| |
| 2ghz { |
| label = "bcm53xx:white:2ghz"; |
| gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| 5ghz { |
| label = "bcm53xx:white:5ghz"; |
| gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| wps { |
| label = "WPS"; |
| linux,code = <KEY_WPS_BUTTON>; |
| gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; |
| }; |
| |
| /* Switch: router / extender */ |
| extender { |
| label = "Extender"; |
| linux,code = <BTN_0>; |
| gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| restart { |
| label = "Reset"; |
| linux,code = <KEY_RESTART>; |
| gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &usb3 { |
| vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &spi_nor { |
| status = "okay"; |
| }; |
| |
| &usb3_phy { |
| status = "okay"; |
| }; |