| /* |
| * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| /dts-v1/; |
| |
| #include "dra72x.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "dra7-mmc-iodelay.dtsi" |
| #include "dra72x-mmc-iodelay.dtsi" |
| #include "am57xx-idk-common.dtsi" |
| |
| / { |
| model = "TI AM5718 IDK"; |
| compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x40000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| cpu0-led { |
| label = "status0:red:cpu0"; |
| gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "cpu0"; |
| }; |
| |
| usr0-led { |
| label = "status0:green:usr"; |
| gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| heartbeat-led { |
| label = "status0:blue:heartbeat"; |
| gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| usr1-led { |
| label = "status1:red:usr"; |
| gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| usr2-led { |
| label = "status1:green:usr"; |
| gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| mmc0-led { |
| label = "status1:blue:mmc0"; |
| gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "mmc0"; |
| }; |
| }; |
| |
| idk-leds { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| red0-led { |
| label = "idk:red0"; |
| gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green0-led { |
| label = "idk:green0"; |
| gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue0-led { |
| label = "idk:blue0"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red1-led { |
| label = "idk:red1"; |
| gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green1-led { |
| label = "idk:green1"; |
| gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue1-led { |
| label = "idk:blue1"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red2-led { |
| label = "idk:red2"; |
| gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green2-led { |
| label = "idk:green2"; |
| gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue2-led { |
| label = "idk:blue2"; |
| gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red3-led { |
| label = "idk:red3"; |
| gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green3-led { |
| label = "idk:green3"; |
| gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue3-led { |
| label = "idk:blue3"; |
| gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &extcon_usb2 { |
| id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; |
| vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &sn65hvs882 { |
| load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &mailbox5 { |
| status = "okay"; |
| mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
| status = "okay"; |
| }; |
| mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
| status = "okay"; |
| }; |
| }; |
| |
| &mailbox6 { |
| status = "okay"; |
| mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
| status = "okay"; |
| }; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &pcie1_ep { |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; |
| pinctrl-1 = <&mmc1_pins_hs>; |
| pinctrl-2 = <&mmc1_pins_sdr12>; |
| pinctrl-3 = <&mmc1_pins_sdr25>; |
| pinctrl-4 = <&mmc1_pins_sdr50>; |
| pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; |
| pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| }; |
| |
| &mmc2 { |
| pinctrl-names = "default", "hs", "ddr_3_3v"; |
| pinctrl-0 = <&mmc2_pins_default>; |
| pinctrl-1 = <&mmc2_pins_hs>; |
| pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; |
| }; |