/*
 * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "am33xx.dtsi"
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "Toby Churchill SL50 Series";
	compatible = "tcl,am335x-sl50", "ti,am33xx";

	cpus {
		cpu@0 {
			cpu0-supply = <&dcdc2_reg>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x20000000>; /* 512 MB */
	};

	chosen {
		stdout-path = &uart0;
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pins>;

		led0 {
			label = "sl50:red:usr0";
			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		led1 {
			label = "sl50:green:usr1";
			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		led2 {
			label = "sl50:red:usr2";
			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		led3 {
			label = "sl50:green:usr3";
			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};
	};

	backlight0: disp0 {
		compatible = "pwm-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&backlight0_pins>;
		pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
				     10 11 12 13 14 15 16 17 18 19
				     20 21 22 23 24 25 26 27 28 29
				     30 31 32 33 34 35 36 37 38 39
				     40 41 42 43 44 45 46 47 48 49
				     50 51 52 53 54 55 56 57 58 59
				     60 61 62 63 64 65 66 67 68 69
				     70 71 72 73 74 75 76 77 78 79
				     80 81 82 83 84 85 86 87 88 89
				     90 91 92 93 94 95 96 97 98 99
				    100>;
		default-brightness-level = <50>;
		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
		power-supply = <&vdd_sys_reg>;
	};

	backlight1: disp1 {
		compatible = "pwm-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&backlight1_pins>;
		pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
				     10 11 12 13 14 15 16 17 18 19
				     20 21 22 23 24 25 26 27 28 29
				     30 31 32 33 34 35 36 37 38 39
				     40 41 42 43 44 45 46 47 48 49
				     50 51 52 53 54 55 56 57 58 59
				     60 61 62 63 64 65 66 67 68 69
				     70 71 72 73 74 75 76 77 78 79
				     80 81 82 83 84 85 86 87 88 89
				     90 91 92 93 94 95 96 97 98 99
				    100>;
		default-brightness-level = <50>;
		enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
		power-supply = <&vdd_sys_reg>;
	};

	clocks {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		/* audio external oscillator */
		audio_mclk_fixed: oscillator@0 {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency  = <24576000>;	/* 24.576MHz */
		};

		audio_mclk: audio_mclk_gate@0 {
			compatible = "gpio-gate-clock";
			#clock-cells = <0>;
			pinctrl-names = "default";
			pinctrl-0 = <&audio_mclk_pins>;
			clocks = <&audio_mclk_fixed>;
			enable-gpios = <&gpio1 27 0>;
		};
	};

	panel: lcd_panel {
		compatible = "ti,tilcdc,panel";
		pinctrl-names = "default";
		pinctrl-0 = <&lcd_pins>;

		panel-info {
			ac-bias = <255>;
			ac-bias-intrpt = <0>;
			dma-burst-sz = <16>;
			bpp = <16>;
			fdd = <0x80>;
			tft-alt-mode = <0>;
			mono-8bit-mode = <0>;
			sync-edge = <0>;
			sync-ctrl = <1>;
			raster-order = <0>;
			fifo-th = <0>;
		};

		display-timings {
			native-mode = <&timing0>;
			timing0: 960x128 {
				clock-frequency = <18000000>;
				hactive = <960>;
				vactive = <272>;

				hback-porch = <40>;
				hfront-porch = <16>;
				hsync-len = <24>;
				hsync-active = <0>;

				vback-porch = <3>;
				vfront-porch = <8>;
				vsync-len = <4>;
				vsync-active = <0>;
			};
		};
	};

	sound {
		compatible = "audio-graph-card";
		label = "sound-card";
		pinctrl-names = "default";
		pinctrl-0 = <&audio_pa_pins>;

		widgets = "Headphone", "Headphone Jack",
			  "Speaker", "Speaker External",
			  "Line", "Line In",
			  "Microphone", "Microphone Jack";

		routing = "Headphone Jack",	"HPLOUT",
			  "Headphone Jack",	"HPROUT",
			  "Amplifier",		"MONO_LOUT",
			  "Speaker External",	"Amplifier",
			  "LINE1R",		"Line In",
			  "LINE1L",		"Line In",
			  "MIC3L",		"Microphone Jack",
			  "MIC3R",		"Microphone Jack",
			  "Microphone Jack",	"Mic Bias";

		dais = <&cpu_port>;

		pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
	};

	emmc_pwrseq: pwrseq@0 {
		compatible = "mmc-pwrseq-emmc";
		pinctrl-names = "default";
		pinctrl-0 = <&emmc_pwrseq_pins>;
		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
	};

	vdd_sys_reg: regulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_sys_reg";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	vmmcsd_fixed: fixedregulator0 {
		compatible = "regulator-fixed";
		regulator-name = "vmmcsd_fixed";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};
};

&am33xx_pinmux {
	pinctrl-names = "default";
	pinctrl-0 = <&lwb_pins>;

	audio_pins: pinmux_audio_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
		>;
	};

	audio_pa_pins: pinmux_audio_pa_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
		>;
	};

	audio_mclk_pins: pinmux_audio_mclk_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
		>;
	};

	backlight0_pins: pinmux_backlight0_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)	/* gpmc_wen.gpio2_4 */
		>;
	};

	backlight1_pins: pinmux_backlight1_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
		>;
	};

	lcd_pins: pinmux_lcd_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
		>;
	};

	led_pins: pinmux_led_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
		>;
	};

	uart0_pins: pinmux_uart0_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
		>;
	};

	uart1_pins: pinmux_uart1_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
		>;
	};

	uart4_pins: pinmux_uart4_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* gpmc_wpn.uart4_txd */
		>;
	};

	i2c0_pins: pinmux_i2c0_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
		>;
	};

	cpsw_default: cpsw_default {
		pinctrl-single,pins = <
			/* Slave 1 */
			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
		>;
	};

	cpsw_sleep: cpsw_sleep {
		pinctrl-single,pins = <
			/* Slave 1 reset value */
			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	davinci_mdio_default: davinci_mdio_default {
		pinctrl-single,pins = <
			/* MDIO */
			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
			/* Ethernet */
			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* Ethernet_nRST - gpmc_ad14.gpio1_14 */
		>;
	};

	davinci_mdio_sleep: davinci_mdio_sleep {
		pinctrl-single,pins = <
			/* MDIO reset value */
			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
		>;
	};

	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
		>;
	};

	emmc_pins: pinmux_emmc_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
		>;
	};

	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
		>;
	};

	rtc0_irq_pins: pinmux_rtc0_irq_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
		>;
	};

	spi0_pins: pinmux_spi0_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MOSI - spi0_d0.spi0_d0 */
			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MISO - spi0_d1.spi0_d1 */
			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CLK  - spi0_clk.spi0_clk */
			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
		>;
	};

	lwb_pins: pinmux_lwb_pins {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
			/* PDI Bus - Battery system */
			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
			/* FPGA */
			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7)	/* FPGA_DONE - gpmc_ad8.gpio0_22 */
			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* FPGA_NRST - gpmc_a0.gpio1_16 */
			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* FPGA_RUN - gpmc_a1.gpio1_17 */
			AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7)	/* ENFPGA - gpmc_a9.gpio1_25 */
			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
		>;
	};
};

&i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;

	clock-frequency = <400000>;

	tps: tps@24 {
		reg = <0x24>;
	};

	rtc0: rtc@68 {
		compatible = "dallas,ds1339";
		pinctrl-names = "default";
		pinctrl-0 = <&rtc0_irq_pins>;
		interrupt-parent = <&gpio0>;
		interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
		wakeup-source;
		trickle-resistor-ohms = <2000>;
		reg = <0x68>;
	};

	eeprom: eeprom@50 {
		compatible = "atmel,24c256";
		reg = <0x50>;
	};

	gpio_exp: mcp23017@20 {
		compatible = "microchip,mcp23017";
		reg = <0x20>;
	};

};

&i2c2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;

	audio_codec: tlv320aic3106@1b {
		status = "okay";
		compatible = "ti,tlv320aic3106";
		#sound-dai-cells = <0>;
		reg = <0x1b>;
		ai3x-micbias-vg = <2>;  /* 2.5V */

		AVDD-supply = <&ldo4_reg>;
		IOVDD-supply = <&ldo4_reg>;
		DRVDD-supply = <&ldo4_reg>;
		DVDD-supply = <&ldo3_reg>;

		codec_port: port {
			codec_endpoint: endpoint {
				remote-endpoint = <&cpu_endpoint>;
				clocks = <&audio_mclk>;
			};
		};
	};

	/* Ambient Light Sensor */
	als: isl29023@44 {
		compatible = "isil,isl29023";
		reg = <0x44>;
	};
};

&rtc {
	status = "disabled";
};

&usb {
	status = "okay";
};

&usb_ctrl_mod {
	status = "okay";
};

&usb0_phy {
	status = "okay";
};

&usb1_phy {
	status = "okay";
};

&usb0 {
	status = "okay";
	dr_mode = "otg";
};

&usb1 {
	status = "okay";
	dr_mode = "host";
};

&cppi41dma  {
	status = "okay";
};

&mmc1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	bus-width = <4>;
	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&vmmcsd_fixed>;
};

&mmc2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_pins>;
	bus-width = <8>;
	vmmc-supply = <&vmmcsd_fixed>;
	mmc-pwrseq = <&emmc_pwrseq>;
};

&mcasp0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&audio_pins>;
	#sound-dai-cells = <0>;
	op-mode = <0>;  /* MCASP_ISS_MODE */
	tdm-slots = <2>;
	/* 4 serializers */
	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
		0 0 1 2
	>;
	tx-num-evt = <32>;
	rx-num-evt = <32>;

	cpu_port: port {
		cpu_endpoint: endpoint {
			remote-endpoint = <&codec_endpoint>;

			dai-format = "dsp_b";
			bitclock-master = <&codec_port>;
			frame-master = <&codec_port>;
			bitclock-inversion;
			clocks = <&audio_mclk>;
		};
	};
};

&uart0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
};

&uart4 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart4_pins>;
};

&spi0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins>;

	flash: n25q032@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q032";
		reg = <1>;
		spi-max-frequency = <5000000>;
	};
};

#include "tps65217.dtsi"

&tps {
	ti,pmic-shutdown-controller;

	interrupt-parent = <&intc>;
	interrupts = <7>;	/* NNMI */

	regulators {
		dcdc1_reg: regulator@0 {
			/* VDDS_DDR */
			regulator-min-microvolt = <1500000>;
			regulator-max-microvolt = <1500000>;
			regulator-always-on;
		};

		dcdc2_reg: regulator@1 {
			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
			regulator-name = "vdd_mpu";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1325000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc3_reg: regulator@2 {
			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
			regulator-name = "vdd_core";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1150000>;
			regulator-boot-on;
			regulator-always-on;
		};

		ldo1_reg: regulator@3 {
			/* VRTC / VIO / VDDS*/
			regulator-always-on;
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};

		ldo2_reg: regulator@4 {
			/* VDD_3V3AUX */
			regulator-always-on;
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
		};

		ldo3_reg: regulator@5 {
			/* VDD_1V8 */
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		ldo4_reg: regulator@6 {
			/* VDD_3V3A */
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};
	};
};

&cpsw_emac0 {
	phy-mode = "mii";
	phy-handle = <&ethphy0>;
};

&mac {
	status = "okay";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&cpsw_default>;
	pinctrl-1 = <&cpsw_sleep>;
};

&davinci_mdio {
	status = "okay";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&davinci_mdio_default>;
	pinctrl-1 = <&davinci_mdio_sleep>;
	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	reset-delay-us = <100>;   /* PHY datasheet states 100us min */

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&sham {
	status = "okay";
};

&aes {
	status = "okay";
};

&epwmss1 {
	status = "okay";
};

&ehrpwm1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&ehrpwm1_pins>;
};

&lcdc {
	status = "okay";
};

&tscadc {
	status = "okay";
};

&am335x_adc {
	ti,adc-channels = <0 1 2 3 4 5 6 7>;
};