/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * USBVISION.H
 *  usbvision header file
 *
 * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
 *                         Dwaine Garden <dwainegarden@rogers.com>
 *
 * Report problems to v4l MailingList: linux-media@vger.kernel.org
 *
 * This module is part of usbvision driver project.
 * Updates to driver completed by Dwaine P. Garden
 * v4l2 conversion by Thierry Merle <thierry.merle@free.fr>
 */


#ifndef __LINUX_USBVISION_H
#define __LINUX_USBVISION_H

#include <linux/list.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/tuner.h>
#include <linux/videodev2.h>

#define USBVISION_DEBUG		/* Turn on debug messages */

#define USBVISION_PWR_REG		0x00
	#define USBVISION_SSPND_EN		(1 << 1)
	#define USBVISION_RES2			(1 << 2)
	#define USBVISION_PWR_VID		(1 << 5)
	#define USBVISION_E2_EN			(1 << 7)
#define USBVISION_CONFIG_REG		0x01
#define USBVISION_ADRS_REG		0x02
#define USBVISION_ALTER_REG		0x03
#define USBVISION_FORCE_ALTER_REG	0x04
#define USBVISION_STATUS_REG		0x05
#define USBVISION_IOPIN_REG		0x06
	#define USBVISION_IO_1			(1 << 0)
	#define USBVISION_IO_2			(1 << 1)
	#define USBVISION_AUDIO_IN		0
	#define USBVISION_AUDIO_TV		1
	#define USBVISION_AUDIO_RADIO		2
	#define USBVISION_AUDIO_MUTE		3
#define USBVISION_SER_MODE		0x07
	#define USBVISION_CLK_OUT		(1 << 0)
	#define USBVISION_DAT_IO		(1 << 1)
	#define USBVISION_SENS_OUT		(1 << 2)
	#define USBVISION_SER_MODE_SOFT		(0 << 4)
	#define USBVISION_SER_MODE_SIO		(1 << 4)
#define USBVISION_SER_ADRS		0x08
#define USBVISION_SER_CONT		0x09
#define USBVISION_SER_DAT1		0x0A
#define USBVISION_SER_DAT2		0x0B
#define USBVISION_SER_DAT3		0x0C
#define USBVISION_SER_DAT4		0x0D
#define USBVISION_EE_DATA		0x0E
#define USBVISION_EE_LSBAD		0x0F
#define USBVISION_EE_CONT		0x10
#define USBVISION_DRM_CONT			0x12
	#define USBVISION_REF			(1 << 0)
	#define USBVISION_RES_UR		(1 << 2)
	#define USBVISION_RES_FDL		(1 << 3)
	#define USBVISION_RES_VDW		(1 << 4)
#define USBVISION_DRM_PRM1		0x13
#define USBVISION_DRM_PRM2		0x14
#define USBVISION_DRM_PRM3		0x15
#define USBVISION_DRM_PRM4		0x16
#define USBVISION_DRM_PRM5		0x17
#define USBVISION_DRM_PRM6		0x18
#define USBVISION_DRM_PRM7		0x19
#define USBVISION_DRM_PRM8		0x1A
#define USBVISION_VIN_REG1		0x1B
	#define USBVISION_8_422_SYNC		0x01
	#define USBVISION_16_422_SYNC		0x02
	#define USBVISION_VSNC_POL		(1 << 3)
	#define USBVISION_HSNC_POL		(1 << 4)
	#define USBVISION_FID_POL		(1 << 5)
	#define USBVISION_HVALID_PO		(1 << 6)
	#define USBVISION_VCLK_POL		(1 << 7)
#define USBVISION_VIN_REG2		0x1C
	#define USBVISION_AUTO_FID		(1 << 0)
	#define USBVISION_NONE_INTER		(1 << 1)
	#define USBVISION_NOHVALID		(1 << 2)
	#define USBVISION_UV_ID			(1 << 3)
	#define USBVISION_FIX_2C		(1 << 4)
	#define USBVISION_SEND_FID		(1 << 5)
	#define USBVISION_KEEP_BLANK		(1 << 7)
#define USBVISION_LXSIZE_I		0x1D
#define USBVISION_MXSIZE_I		0x1E
#define USBVISION_LYSIZE_I		0x1F
#define USBVISION_MYSIZE_I		0x20
#define USBVISION_LX_OFFST		0x21
#define USBVISION_MX_OFFST		0x22
#define USBVISION_LY_OFFST		0x23
#define USBVISION_MY_OFFST		0x24
#define USBVISION_FRM_RATE		0x25
#define USBVISION_LXSIZE_O		0x26
#define USBVISION_MXSIZE_O		0x27
#define USBVISION_LYSIZE_O		0x28
#define USBVISION_MYSIZE_O		0x29
#define USBVISION_FILT_CONT		0x2A
#define USBVISION_VO_MODE		0x2B
#define USBVISION_INTRA_CYC		0x2C
#define USBVISION_STRIP_SZ		0x2D
#define USBVISION_FORCE_INTRA		0x2E
#define USBVISION_FORCE_UP		0x2F
#define USBVISION_BUF_THR		0x30
#define USBVISION_DVI_YUV		0x31
#define USBVISION_AUDIO_CONT		0x32
#define USBVISION_AUD_PK_LEN		0x33
#define USBVISION_BLK_PK_LEN		0x34
#define USBVISION_PCM_THR1		0x38
#define USBVISION_PCM_THR2		0x39
#define USBVISION_DIST_THR_L		0x3A
#define USBVISION_DIST_THR_H		0x3B
#define USBVISION_MAX_DIST_L		0x3C
#define USBVISION_MAX_DIST_H		0x3D
#define USBVISION_OP_CODE		0x33

#define MAX_BYTES_PER_PIXEL		4

#define MIN_FRAME_WIDTH			64
#define MAX_USB_WIDTH			320  /* 384 */
#define MAX_FRAME_WIDTH			320  /* 384 */			/* stretching sometimes causes crashes*/

#define MIN_FRAME_HEIGHT		48
#define MAX_USB_HEIGHT			240  /* 288 */
#define MAX_FRAME_HEIGHT		240  /* 288 */			/* Stretching sometimes causes crashes*/

#define MAX_FRAME_SIZE			(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */

#define USBVISION_URB_FRAMES		32

#define USBVISION_NUM_HEADERMARKER	20
#define USBVISION_NUMFRAMES		3  /* Maximum number of frames an application can get */
#define USBVISION_NUMSBUF		2 /* Dimensioning the USB S buffering */

#define USBVISION_POWEROFF_TIME		(3 * HZ)		/* 3 seconds */


#define FRAMERATE_MIN	0
#define FRAMERATE_MAX	31

enum {
	ISOC_MODE_YUV422 = 0x03,
	ISOC_MODE_YUV420 = 0x14,
	ISOC_MODE_COMPRESS = 0x60,
};

/* This macro restricts an int variable to an inclusive range */
#define RESTRICT_TO_RANGE(v, mi, ma) \
	{ if (((int)v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }

/*
 * We use macros to do YUV -> RGB conversion because this is
 * very important for speed and totally unimportant for size.
 *
 * YUV -> RGB Conversion
 * ---------------------
 *
 * B = 1.164*(Y-16)		    + 2.018*(V-128)
 * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
 * R = 1.164*(Y-16) + 1.596*(U-128)
 *
 * If you fancy integer arithmetic (as you should), hear this:
 *
 * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
 * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
 * 65536*R = 76284*(Y-16) + 104595*(U-128)
 *
 * Make sure the output values are within [0..255] range.
 */
#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
#define YUV_TO_RGB_BY_THE_BOOK(my, mu, mv, mr, mg, mb) { \
	int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
	mm_y = (my) - 16; \
	mm_u = (mu) - 128; \
	mm_v = (mv) - 128; \
	mm_yc = mm_y * 76284; \
	mm_b = (mm_yc + 132252 * mm_v) >> 16; \
	mm_g = (mm_yc - 53281 * mm_u - 25625 * mm_v) >> 16; \
	mm_r = (mm_yc + 104595 * mm_u) >> 16; \
	mb = LIMIT_RGB(mm_b); \
	mg = LIMIT_RGB(mm_g); \
	mr = LIMIT_RGB(mm_r); \
}

/*
 * This macro checks if usbvision is still operational. The 'usbvision'
 * pointer must be valid, usbvision->dev must be valid, we are not
 * removing the device and the device has not erred on us.
 */
#define USBVISION_IS_OPERATIONAL(udevice) (\
	(udevice != NULL) && \
	((udevice)->dev != NULL) && \
	((udevice)->last_error == 0) && \
	(!(udevice)->remove_pending))

#define I2C_USB_ADAP_MAX	16

#define USBVISION_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL_M)

/* ----------------------------------------------------------------- */
/* usbvision video structures                                        */
/* ----------------------------------------------------------------- */
enum scan_state {
	scan_state_scanning,	/* Scanning for header */
	scan_state_lines	/* Parsing lines */
};

/* Completion states of the data parser */
enum parse_state {
	parse_state_continue,	/* Just parse next item */
	parse_state_next_frame,	/* Frame done, send it to V4L */
	parse_state_out,	/* Not enough data for frame */
	parse_state_end_parse	/* End parsing */
};

enum frame_state {
	frame_state_unused,	/* Unused (no MCAPTURE) */
	frame_state_ready,	/* Ready to start grabbing */
	frame_state_grabbing,	/* In the process of being grabbed into */
	frame_state_done,	/* Finished grabbing, but not been synced yet */
	frame_state_done_hold,	/* Are syncing or reading */
	frame_state_error,	/* Something bad happened while processing */
};

/* stream states */
enum stream_state {
	stream_off,		/* Driver streaming is completely OFF */
	stream_idle,		/* Driver streaming is ready to be put ON by the application */
	stream_interrupt,	/* Driver streaming must be interrupted */
	stream_on,		/* Driver streaming is put ON by the application */
};

enum isoc_state {
	isoc_state_in_frame,	/* Isoc packet is member of frame */
	isoc_state_no_frame,	/* Isoc packet is not member of any frame */
};

struct usb_device;

struct usbvision_sbuf {
	char *data;
	struct urb *urb;
};

#define USBVISION_MAGIC_1			0x55
#define USBVISION_MAGIC_2			0xAA
#define USBVISION_HEADER_LENGTH			0x0c
#define USBVISION_SAA7111_ADDR			0x48
#define USBVISION_SAA7113_ADDR			0x4a
#define USBVISION_IIC_LRACK			0x20
#define USBVISION_IIC_LRNACK			0x30
#define USBVISION_FRAME_FORMAT_PARAM_INTRA	(1<<7)

struct usbvision_v4l2_format_st {
	int		supported;
	int		bytes_per_pixel;
	int		depth;
	int		format;
	char		*desc;
};
#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format)

struct usbvision_frame_header {
	unsigned char magic_1;				/* 0 magic */
	unsigned char magic_2;				/* 1  magic */
	unsigned char header_length;			/* 2 */
	unsigned char frame_num;			/* 3 */
	unsigned char frame_phase;			/* 4 */
	unsigned char frame_latency;			/* 5 */
	unsigned char data_format;			/* 6 */
	unsigned char format_param;			/* 7 */
	unsigned char frame_width_lo;			/* 8 */
	unsigned char frame_width_hi;			/* 9 */
	unsigned char frame_height_lo;			/* 10 */
	unsigned char frame_height_hi;			/* 11 */
	__u16 frame_width;				/* 8 - 9 after endian correction*/
	__u16 frame_height;				/* 10 - 11 after endian correction*/
};

struct usbvision_frame {
	char *data;					/* Frame buffer */
	struct usbvision_frame_header isoc_header;	/* Header from stream */

	int width;					/* Width application is expecting */
	int height;					/* Height */
	int index;					/* Frame index */
	int frmwidth;					/* Width the frame actually is */
	int frmheight;					/* Height */

	volatile int grabstate;				/* State of grabbing */
	int scanstate;					/* State of scanning */

	struct list_head frame;

	int curline;					/* Line of frame we're working on */

	long scanlength;				/* uncompressed, raw data length of frame */
	long bytes_read;				/* amount of scanlength that has been read from data */
	struct usbvision_v4l2_format_st v4l2_format;	/* format the user needs*/
	int v4l2_linesize;				/* bytes for one videoline*/
	u64 ts;
	int sequence;					/* How many video frames we send to user */
};

#define CODEC_SAA7113	7113
#define CODEC_SAA7111	7111
#define CODEC_WEBCAM	3000
#define BRIDGE_NT1003	1003
#define BRIDGE_NT1004	1004
#define BRIDGE_NT1005   1005

struct usbvision_device_data_st {
	__u64 video_norm;
	const char *model_string;
	int interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
	__u16 codec;
	unsigned video_channels:3;
	unsigned audio_channels:2;
	unsigned radio:1;
	unsigned vbi:1;
	unsigned tuner:1;
	unsigned vin_reg1_override:1;	/* Override default value with */
	unsigned vin_reg2_override:1;   /* vin_reg1, vin_reg2, etc. */
	unsigned dvi_yuv_override:1;
	__u8 vin_reg1;
	__u8 vin_reg2;
	__u8 dvi_yuv;
	__u8 tuner_type;
	__s16 x_offset;
	__s16 y_offset;
};

/* Declared on usbvision-cards.c */
extern struct usbvision_device_data_st usbvision_device_data[];
extern struct usb_device_id usbvision_table[];

struct usb_usbvision {
	struct v4l2_device v4l2_dev;
	struct v4l2_ctrl_handler hdl;
	struct video_device vdev;					/* Video Device */
	struct video_device rdev;					/* Radio Device */

	/* i2c Declaration Section*/
	struct i2c_adapter i2c_adap;
	int registered_i2c;

	struct urb *ctrl_urb;
	unsigned char ctrl_urb_buffer[8];
	int ctrl_urb_busy;
	struct usb_ctrlrequest ctrl_urb_setup;

	/* configuration part */
	int have_tuner;
	int tuner_type;
	int bridge_type;						/* NT1003, NT1004, NT1005 */
	int radio;
	int video_inputs;						/* # of inputs */
	unsigned long radio_freq;
	unsigned long tv_freq;
	int audio_mute;
	int audio_channel;
	int isoc_mode;							/* format of video data for the usb isoc-transfer */
	unsigned int nr;						/* Number of the device */

	/* Device structure */
	struct usb_device *dev;
	/* usb transfer */
	int num_alt;		/* Number of alternative settings */
	unsigned int *alt_max_pkt_size;	/* array of max_packet_size */
	unsigned char iface;						/* Video interface number */
	unsigned char iface_alt;					/* Alt settings */
	unsigned char vin_reg2_preset;
	struct mutex v4l2_lock;
	int power;							/* is the device powered on? */
	int user;							/* user count for exclusive use */
	int initialized;						/* Had we already sent init sequence? */
	int dev_model;							/* What type of USBVISION device we got? */
	enum stream_state streaming;					/* Are we streaming Isochronous? */
	int last_error;							/* What calamity struck us? */
	int curwidth;							/* width of the frame the device is currently set to*/
	int curheight;							/* height of the frame the device is currently set to*/
	int stretch_width;						/* stretch-factor for frame width (from usb to screen)*/
	int stretch_height;						/* stretch-factor for frame height (from usb to screen)*/
	char *fbuf;							/* Videodev buffer area for mmap*/
	int max_frame_size;						/* Bytes in one video frame */
	int fbuf_size;							/* Videodev buffer size */
	spinlock_t queue_lock;						/* spinlock for protecting mods on inqueue and outqueue */
	struct list_head inqueue, outqueue;                             /* queued frame list and ready to dequeue frame list */
	wait_queue_head_t wait_frame;					/* Processes waiting */
	wait_queue_head_t wait_stream;					/* Processes waiting */
	struct usbvision_frame *cur_frame;				/* pointer to current frame, set by usbvision_find_header */
	struct usbvision_frame frame[USBVISION_NUMFRAMES];		/* frame buffer */
	int num_frames;							/* number of frames allocated */
	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			/* S buffering */
	volatile int remove_pending;					/* If set then about to exit */

	/* Scratch space from the Isochronous Pipe.*/
	unsigned char *scratch;
	int scratch_read_ptr;
	int scratch_write_ptr;
	int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
	int scratch_headermarker_read_ptr;
	int scratch_headermarker_write_ptr;
	enum isoc_state isocstate;
	struct usbvision_v4l2_format_st palette;

	struct v4l2_capability vcap;					/* Video capabilities */
	unsigned int ctl_input;						/* selected input */
	v4l2_std_id tvnorm_id;						/* selected tv norm */
	unsigned char video_endp;					/* 0x82 for USBVISION devices based */

	/* Decompression stuff: */
	unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
	int block_pos;							/* for test only */
	int request_intra;						/* 0 = normal; 1 = intra frame is requested; */
	int last_isoc_frame_num;					/* check for lost isoc frames */
	int isoc_packet_size;						/* need to calculate used_bandwidth */
	int used_bandwidth;						/* used bandwidth 0-100%, need to set compr_level */
	int compr_level;						/* How strong (100) or weak (0) is compression */
	int last_compr_level;						/* How strong (100) or weak (0) was compression */
	int usb_bandwidth;						/* Mbit/s */

	/* Statistics that can be overlaid on the screen */
	unsigned long isoc_urb_count;			/* How many URBs we received so far */
	unsigned long urb_length;			/* Length of last URB */
	unsigned long isoc_data_count;			/* How many bytes we received */
	unsigned long header_count;			/* How many frame headers we found */
	unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
	unsigned long isoc_skip_count;			/* How many empty ISO packets received */
	unsigned long isoc_err_count;			/* How many bad ISO packets received */
	unsigned long isoc_packet_count;		/* How many packets we totally got */
	int isoc_measure_bandwidth_count;
	int frame_num;					/* How many video frames we send to user */
	int max_strip_len;				/* How big is the biggest strip */
	int comprblock_pos;
	int strip_len_errors;				/* How many times was block_pos greater than strip_len */
	int strip_magic_errors;
	int strip_line_number_errors;
	int compr_block_types[4];
};

static inline struct usb_usbvision *to_usbvision(struct v4l2_device *v4l2_dev)
{
	return container_of(v4l2_dev, struct usb_usbvision, v4l2_dev);
}

#define call_all(usbvision, o, f, args...) \
	v4l2_device_call_all(&usbvision->v4l2_dev, 0, o, f, ##args)

/* --------------------------------------------------------------- */
/* defined in usbvision-i2c.c                                      */
/* i2c-algo-usb declaration                                        */
/* --------------------------------------------------------------- */

/* ----------------------------------------------------------------------- */
/* usbvision specific I2C functions                                        */
/* ----------------------------------------------------------------------- */
int usbvision_i2c_register(struct usb_usbvision *usbvision);
int usbvision_i2c_unregister(struct usb_usbvision *usbvision);

/* defined in usbvision-core.c                                      */
int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg);
int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
			unsigned char value);

int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames);
void usbvision_frames_free(struct usb_usbvision *usbvision);
int usbvision_scratch_alloc(struct usb_usbvision *usbvision);
void usbvision_scratch_free(struct usb_usbvision *usbvision);
int usbvision_decompress_alloc(struct usb_usbvision *usbvision);
void usbvision_decompress_free(struct usb_usbvision *usbvision);

int usbvision_setup(struct usb_usbvision *usbvision, int format);
int usbvision_init_isoc(struct usb_usbvision *usbvision);
int usbvision_restart_isoc(struct usb_usbvision *usbvision);
void usbvision_stop_isoc(struct usb_usbvision *usbvision);
int usbvision_set_alternate(struct usb_usbvision *dev);

int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel);
int usbvision_audio_off(struct usb_usbvision *usbvision);

int usbvision_begin_streaming(struct usb_usbvision *usbvision);
void usbvision_empty_framequeues(struct usb_usbvision *dev);
int usbvision_stream_interrupt(struct usb_usbvision *dev);

int usbvision_muxsel(struct usb_usbvision *usbvision, int channel);
int usbvision_set_input(struct usb_usbvision *usbvision);
int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);

int usbvision_power_off(struct usb_usbvision *usbvision);
int usbvision_power_on(struct usb_usbvision *usbvision);

#endif									/* __LINUX_USBVISION_H */