[ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters
Patch from Richard Purdie
Abstract some machine specific parameters from the sharpsl_pm core
into the machine specific drivers. This allows the core to support
tosa/poodle.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 3cd8c9e..045e37e 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -49,13 +49,6 @@
#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
-#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
-
/*
* Prototypes
*/
@@ -82,12 +75,13 @@
static int get_percentage(int voltage)
{
int i = sharpsl_pm.machinfo->bat_levels - 1;
+ int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
struct battery_thresh *thresh;
if (sharpsl_pm.charge_mode == CHRG_ON)
- thresh=sharpsl_pm.machinfo->bat_levels_acin;
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
else
- thresh=sharpsl_pm.machinfo->bat_levels_noac;
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
while (i > 0 && (voltage > thresh[i].voltage))
i--;
@@ -131,7 +125,7 @@
sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
/* Corgi cannot confirm when battery fully charged so periodically kick! */
- if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+ if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
&& time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
schedule_work(&toggle_charger);
@@ -166,11 +160,11 @@
&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- corgibl_limit_intensity(1);
+ sharpsl_pm.machinfo->backlight_limit(1);
sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
}
} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- corgibl_limit_intensity(0);
+ sharpsl_pm.machinfo->backlight_limit(0);
sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
}
@@ -418,7 +412,7 @@
val = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > SHARPSL_CHARGE_ON_TEMP)
+ if (val > sharpsl_pm.machinfo->charge_on_temp)
return -1;
return 0;
@@ -450,7 +444,7 @@
val = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
- if (val < SHARPSL_CHARGE_ON_VOLT)
+ if (val < sharpsl_pm.machinfo->charge_on_volt)
return -1;
return 0;
@@ -468,7 +462,7 @@
temp = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
- if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
+ if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
return -1;
}
@@ -627,8 +621,8 @@
temp = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
- if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
- (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+ if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+ (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
return -1;
return 0;
}
