diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index f857e76..42fa105 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -270,7 +270,7 @@
 	 * and 0x01 (whitelist enabled) use the new filter policies
 	 * 0x02 (no whitelist) and 0x03 (whitelist enabled).
 	 */
-	if (test_bit(HCI_PRIVACY, &hdev->dev_flags) &&
+	if (hci_dev_test_flag(hdev, HCI_PRIVACY) &&
 	    (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
 		filter_policy |= 0x02;
 
@@ -304,7 +304,7 @@
 	 * In this kind of scenario skip the update and let the random
 	 * address be updated at the next cycle.
 	 */
-	if (test_bit(HCI_LE_ADV, &hdev->dev_flags) ||
+	if (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
 	    hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
 		BT_DBG("Deferring random address update");
 		set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags);
@@ -324,7 +324,7 @@
 	 * current RPA has expired or there is something else than
 	 * the current RPA in use, then generate a new one.
 	 */
-	if (test_bit(HCI_PRIVACY, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_PRIVACY)) {
 		int to;
 
 		*own_addr_type = ADDR_LE_DEV_RANDOM;
@@ -385,7 +385,7 @@
 	 */
 	if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) ||
 	    !bacmp(&hdev->bdaddr, BDADDR_ANY) ||
-	    (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags) &&
+	    (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
 	     bacmp(&hdev->static_addr, BDADDR_ANY))) {
 		*own_addr_type = ADDR_LE_DEV_RANDOM;
 		if (bacmp(&hdev->static_addr, &hdev->random_addr))
@@ -425,7 +425,7 @@
 	struct hci_dev *hdev = req->hdev;
 	u8 scan;
 
-	if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
 		return;
 
 	if (!hdev_is_powered(hdev))
@@ -434,7 +434,7 @@
 	if (mgmt_powering_down(hdev))
 		return;
 
-	if (test_bit(HCI_CONNECTABLE, &hdev->dev_flags) ||
+	if (hci_dev_test_flag(hdev, HCI_CONNECTABLE) ||
 	    disconnected_whitelist_entries(hdev))
 		scan = SCAN_PAGE;
 	else
@@ -443,7 +443,7 @@
 	if (test_bit(HCI_PSCAN, &hdev->flags) == !!(scan & SCAN_PAGE))
 		return;
 
-	if (test_bit(HCI_DISCOVERABLE, &hdev->dev_flags))
+	if (hci_dev_test_flag(hdev, HCI_DISCOVERABLE))
 		scan |= SCAN_INQUIRY;
 
 	hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan);
@@ -471,14 +471,14 @@
 
 	if (!test_bit(HCI_UP, &hdev->flags) ||
 	    test_bit(HCI_INIT, &hdev->flags) ||
-	    test_bit(HCI_SETUP, &hdev->dev_flags) ||
-	    test_bit(HCI_CONFIG, &hdev->dev_flags) ||
-	    test_bit(HCI_AUTO_OFF, &hdev->dev_flags) ||
-	    test_bit(HCI_UNREGISTER, &hdev->dev_flags))
+	    hci_dev_test_flag(hdev, HCI_SETUP) ||
+	    hci_dev_test_flag(hdev, HCI_CONFIG) ||
+	    hci_dev_test_flag(hdev, HCI_AUTO_OFF) ||
+	    hci_dev_test_flag(hdev, HCI_UNREGISTER))
 		return;
 
 	/* No point in doing scanning if LE support hasn't been enabled */
-	if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED))
 		return;
 
 	/* If discovery is active don't interfere with it */
@@ -502,7 +502,7 @@
 		 */
 
 		/* If controller is not scanning we are done. */
-		if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+		if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
 			return;
 
 		hci_req_add_le_scan_disable(req);
@@ -524,7 +524,7 @@
 		/* If controller is currently scanning, we stop it to ensure we
 		 * don't miss any advertising (due to duplicates filter).
 		 */
-		if (test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+		if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
 			hci_req_add_le_scan_disable(req);
 
 		hci_req_add_le_passive_scan(req);