ALSA: fireworks: Add transaction and some commands
Fireworks uses own command and response. This commit adds functionality to
transact and adds some commands required for sound card instance and kernel
streaming.
There are two ways to deliver substance of this transaction:
1.AV/C vendor dependent command for command/response
2.Async transaction to specific addresses for command/response
By way 1, I confirm AudioFire12 cannot correctly response to some commands with
firmware version 5.0 or later. This is also confirmed by FFADO. So this driver
implement way 2.
The address for response gives an issue. When this driver allocate own callback
function into the address, then no one can allocate its own callback function.
This situation is not good for applications in user-land. This issue is solved
in later commit.
I note there is a command to change the address for response if the device
supports. But this driver uses default value. So users should not execute this
command as long as hoping this driver works correctly.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/firewire/fireworks/fireworks.h b/sound/firewire/fireworks/fireworks.h
index 9dfeb82..e999802 100644
--- a/sound/firewire/fireworks/fireworks.h
+++ b/sound/firewire/fireworks/fireworks.h
@@ -20,6 +20,28 @@
#include <sound/core.h>
#include <sound/initval.h>
+#include <sound/pcm.h>
+
+#include "../cmp.h"
+#include "../lib.h"
+
+#define SND_EFW_MULTIPLIER_MODES 3
+#define HWINFO_NAME_SIZE_BYTES 32
+#define HWINFO_MAX_CAPS_GROUPS 8
+
+/*
+ * This should be greater than maximum bytes for EFW response content.
+ * Currently response against command for isochronous channel mapping is
+ * confirmed to be the maximum one. But for flexibility, use maximum data
+ * payload for asynchronous primary packets at S100 (Cable base rate) in
+ * IEEE Std 1394-1995.
+ */
+#define SND_EFW_RESPONSE_MAXIMUM_BYTES 0x200U
+
+struct snd_efw_phys_grp {
+ u8 type; /* see enum snd_efw_grp_type */
+ u8 count;
+} __packed;
struct snd_efw {
struct snd_card *card;
@@ -28,8 +50,112 @@
struct mutex mutex;
spinlock_t lock;
+
+ /* for transaction */
+ u32 seqnum;
+ bool resp_addr_changable;
};
+struct snd_efw_transaction {
+ __be32 length;
+ __be32 version;
+ __be32 seqnum;
+ __be32 category;
+ __be32 command;
+ __be32 status;
+ __be32 params[0];
+};
+int snd_efw_transaction_run(struct fw_unit *unit,
+ const void *cmd, unsigned int cmd_size,
+ void *resp, unsigned int resp_size);
+int snd_efw_transaction_register(void);
+void snd_efw_transaction_unregister(void);
+void snd_efw_transaction_bus_reset(struct fw_unit *unit);
+
+struct snd_efw_hwinfo {
+ u32 flags;
+ u32 guid_hi;
+ u32 guid_lo;
+ u32 type;
+ u32 version;
+ char vendor_name[HWINFO_NAME_SIZE_BYTES];
+ char model_name[HWINFO_NAME_SIZE_BYTES];
+ u32 supported_clocks;
+ u32 amdtp_rx_pcm_channels;
+ u32 amdtp_tx_pcm_channels;
+ u32 phys_out;
+ u32 phys_in;
+ u32 phys_out_grp_count;
+ struct snd_efw_phys_grp phys_out_grps[HWINFO_MAX_CAPS_GROUPS];
+ u32 phys_in_grp_count;
+ struct snd_efw_phys_grp phys_in_grps[HWINFO_MAX_CAPS_GROUPS];
+ u32 midi_out_ports;
+ u32 midi_in_ports;
+ u32 max_sample_rate;
+ u32 min_sample_rate;
+ u32 dsp_version;
+ u32 arm_version;
+ u32 mixer_playback_channels;
+ u32 mixer_capture_channels;
+ u32 fpga_version;
+ u32 amdtp_rx_pcm_channels_2x;
+ u32 amdtp_tx_pcm_channels_2x;
+ u32 amdtp_rx_pcm_channels_4x;
+ u32 amdtp_tx_pcm_channels_4x;
+ u32 reserved[16];
+} __packed;
+enum snd_efw_grp_type {
+ SND_EFW_CH_TYPE_ANALOG = 0,
+ SND_EFW_CH_TYPE_SPDIF = 1,
+ SND_EFW_CH_TYPE_ADAT = 2,
+ SND_EFW_CH_TYPE_SPDIF_OR_ADAT = 3,
+ SND_EFW_CH_TYPE_ANALOG_MIRRORING = 4,
+ SND_EFW_CH_TYPE_HEADPHONES = 5,
+ SND_EFW_CH_TYPE_I2S = 6,
+ SND_EFW_CH_TYPE_GUITAR = 7,
+ SND_EFW_CH_TYPE_PIEZO_GUITAR = 8,
+ SND_EFW_CH_TYPE_GUITAR_STRING = 9,
+ SND_EFW_CH_TYPE_VIRTUAL = 0x10000,
+ SND_EFW_CH_TYPE_DUMMY
+};
+struct snd_efw_phys_meters {
+ u32 status; /* guitar state/midi signal/clock input detect */
+ u32 reserved0;
+ u32 reserved1;
+ u32 reserved2;
+ u32 reserved3;
+ u32 out_meters;
+ u32 in_meters;
+ u32 reserved4;
+ u32 reserved5;
+ u32 values[0];
+} __packed;
+enum snd_efw_clock_source {
+ SND_EFW_CLOCK_SOURCE_INTERNAL = 0,
+ SND_EFW_CLOCK_SOURCE_SYTMATCH = 1,
+ SND_EFW_CLOCK_SOURCE_WORDCLOCK = 2,
+ SND_EFW_CLOCK_SOURCE_SPDIF = 3,
+ SND_EFW_CLOCK_SOURCE_ADAT_1 = 4,
+ SND_EFW_CLOCK_SOURCE_ADAT_2 = 5,
+ SND_EFW_CLOCK_SOURCE_CONTINUOUS = 6 /* internal variable clock */
+};
+enum snd_efw_transport_mode {
+ SND_EFW_TRANSPORT_MODE_WINDOWS = 0,
+ SND_EFW_TRANSPORT_MODE_IEC61883 = 1,
+};
+int snd_efw_command_set_resp_addr(struct snd_efw *efw,
+ u16 addr_high, u32 addr_low);
+int snd_efw_command_set_tx_mode(struct snd_efw *efw, unsigned int mode);
+int snd_efw_command_get_hwinfo(struct snd_efw *efw,
+ struct snd_efw_hwinfo *hwinfo);
+int snd_efw_command_get_phys_meters(struct snd_efw *efw,
+ struct snd_efw_phys_meters *meters,
+ unsigned int len);
+int snd_efw_command_get_clock_source(struct snd_efw *efw,
+ enum snd_efw_clock_source *source);
+int snd_efw_command_get_sampling_rate(struct snd_efw *efw, unsigned int *rate);
+int snd_efw_command_set_sampling_rate(struct snd_efw *efw, unsigned int rate);
+
#define SND_EFW_DEV_ENTRY(vendor, model) \
{ \
.match_flags = IEEE1394_MATCH_VENDOR_ID | \
