[libata] Update kernel-doc comments to match source code
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 837fb60..c2f18ef 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4732,7 +4732,6 @@
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
- * @tag: command tag
*
* LOCKING:
* None.
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 1266924c..1050fed 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -356,7 +356,6 @@
* bfin_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: um
- * @udma: udma mode, 0 - 6
*
* Set UDMA mode for device.
*
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index cbd98c1..6c1d778 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -638,7 +638,6 @@
* qdi6580dp_set_piomode - PIO setup for dual channel
* @ap: Port
* @adev: Device
- * @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue.
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index c0dbc46..2c1a91c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -116,7 +116,6 @@
* oldpiix_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: Device to program
- * @isich: True if the device is an ICH and has IOCFG registers
*
* Set MWDMA mode for device, in host controller PCI config space.
*
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index d43e8be9..e94efcc 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -281,7 +281,6 @@
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
- * @pio: PIO mode, 0 - 4
*
* Set PIO mode for device.
*
@@ -326,7 +325,6 @@
* pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
* @ap: Port to configure
* @adev: um
- * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6
*
* Set UDMA mode for device.
*
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 0b0aa45..695d44a 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -81,7 +81,6 @@
* radisys_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: Device to program
- * @isich: True if the device is an ICH and has IOCFG registers
*
* Set MWDMA mode for device, in host controller PCI config space.
*
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index cf3707e..d447f1c 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -210,7 +210,6 @@
* scc_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: um
- * @udma: udma mode, 0 - 6
*
* Set UDMA mode for device.
*
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 72e41c9..8d2fd9d 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -138,7 +138,6 @@
/**
* serverworks_cable_detect - cable detection
* @ap: ATA port
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection according to the device and subvendor
* identifications
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index e4be55e..27ceb42 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -112,7 +112,6 @@
/**
* sis_66_cable_detect - check for 40/80 pin
* @ap: Port
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection on the UDMA66, UDMA100 and early UDMA133
* SiS IDE controllers.
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2b24ae5..86918634 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1836,7 +1836,6 @@
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
- * @qc: affected command (non-NCQ), or NULL
*
* Most cases require a full reset of the chip's state machine,
* which also performs a COMRESET.
