diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 11c2b01..68454da 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -1,19 +1,19 @@
 /*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
-#include <stdlib.h>
 #include <unistd.h>
+#include <sched.h>
 #include <signal.h>
 #include <errno.h>
-#include <sched.h>
-#include <sys/syscall.h>
-#include "os.h"
+#include <sys/time.h>
+#include <asm/unistd.h>
 #include "aio.h"
 #include "init.h"
-#include "user.h"
 #include "kern_constants.h"
+#include "os.h"
+#include "user.h"
 
 struct aio_thread_req {
 	enum aio_type type;
@@ -27,7 +27,8 @@
 #if defined(HAVE_AIO_ABI)
 #include <linux/aio_abi.h>
 
-/* If we have the headers, we are going to build with AIO enabled.
+/*
+ * If we have the headers, we are going to build with AIO enabled.
  * If we don't have aio in libc, we define the necessary stubs here.
  */
 
@@ -51,7 +52,8 @@
 
 #endif
 
-/* The AIO_MMAP cases force the mmapped page into memory here
+/*
+ * The AIO_MMAP cases force the mmapped page into memory here
  * rather than in whatever place first touches the data.  I used
  * to do this by touching the page, but that's delicate because
  * gcc is prone to optimizing that away.  So, what's done here
@@ -105,12 +107,12 @@
 
 	signal(SIGWINCH, SIG_IGN);
 
-	while(1){
+	while (1) {
 		n = io_getevents(ctx, 1, 1, &event, NULL);
-		if(n < 0){
-			if(errno == EINTR)
+		if (n < 0) {
+			if (errno == EINTR)
 				continue;
-			printk("aio_thread - io_getevents failed, "
+			printk(UM_KERN_ERR "aio_thread - io_getevents failed, "
 			       "errno = %d\n", errno);
 		}
 		else {
@@ -119,9 +121,9 @@
 						.err	= event.res });
 			reply_fd = ((struct aio_context *) reply.data)->reply_fd;
 			err = write(reply_fd, &reply, sizeof(reply));
-			if(err != sizeof(reply))
-				printk("aio_thread - write failed, fd = %d, "
-				       "err = %d\n", reply_fd, errno);
+			if (err != sizeof(reply))
+				printk(UM_KERN_ERR "aio_thread - write failed, "
+				       "fd = %d, err = %d\n", reply_fd, errno);
 		}
 	}
 	return 0;
@@ -136,10 +138,10 @@
 	int n;
 
 	actual = lseek64(req->io_fd, req->offset, SEEK_SET);
-	if(actual != req->offset)
+	if (actual != req->offset)
 		return -errno;
 
-	switch(req->type){
+	switch(req->type) {
 	case AIO_READ:
 		n = read(req->io_fd, req->buf, req->len);
 		break;
@@ -150,11 +152,12 @@
 		n = read(req->io_fd, &c, sizeof(c));
 		break;
 	default:
-		printk("do_not_aio - bad request type : %d\n", req->type);
+		printk(UM_KERN_ERR "do_not_aio - bad request type : %d\n",
+		       req->type);
 		return -EINVAL;
 	}
 
-	if(n < 0)
+	if (n < 0)
 		return -errno;
 	return 0;
 }
@@ -172,16 +175,18 @@
 	int err;
 
 	signal(SIGWINCH, SIG_IGN);
-	while(1){
+	while (1) {
 		err = read(aio_req_fd_r, &req, sizeof(req));
-		if(err != sizeof(req)){
-			if(err < 0)
-				printk("not_aio_thread - read failed, "
-				       "fd = %d, err = %d\n", aio_req_fd_r,
+		if (err != sizeof(req)) {
+			if (err < 0)
+				printk(UM_KERN_ERR "not_aio_thread - "
+				       "read failed, fd = %d, err = %d\n",
+				       aio_req_fd_r,
 				       errno);
 			else {
-				printk("not_aio_thread - short read, fd = %d, "
-				       "length = %d\n", aio_req_fd_r, err);
+				printk(UM_KERN_ERR "not_aio_thread - short "
+				       "read, fd = %d, length = %d\n",
+				       aio_req_fd_r, err);
 			}
 			continue;
 		}
@@ -189,9 +194,9 @@
 		reply = ((struct aio_thread_reply) { .data 	= req.aio,
 						     .err	= err });
 		err = write(req.aio->reply_fd, &reply, sizeof(reply));
-		if(err != sizeof(reply))
-			printk("not_aio_thread - write failed, fd = %d, "
-			       "err = %d\n", req.aio->reply_fd, errno);
+		if (err != sizeof(reply))
+			printk(UM_KERN_ERR "not_aio_thread - write failed, "
+			       "fd = %d, err = %d\n", req.aio->reply_fd, errno);
 	}
 
 	return 0;
@@ -202,19 +207,19 @@
 	int fds[2], err;
 
 	err = os_pipe(fds, 1, 1);
-	if(err)
+	if (err)
 		goto out;
 
 	aio_req_fd_w = fds[0];
 	aio_req_fd_r = fds[1];
 
 	err = os_set_fd_block(aio_req_fd_w, 0);
-	if(err)
+	if (err)
 		goto out_close_pipe;
 
 	err = run_helper_thread(not_aio_thread, NULL,
 				CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
-	if(err < 0)
+	if (err < 0)
 		goto out_close_pipe;
 
 	aio_pid = err;
@@ -227,10 +232,11 @@
 	aio_req_fd_r = -1;
 out:
 #ifndef HAVE_AIO_ABI
-	printk("/usr/include/linux/aio_abi.h not present during build\n");
+	printk(UM_KERN_INFO "/usr/include/linux/aio_abi.h not present during "
+	       "build\n");
 #endif
-	printk("2.6 host AIO support not used - falling back to I/O "
-	       "thread\n");
+	printk(UM_KERN_INFO "2.6 host AIO support not used - falling back to "
+	       "I/O thread\n");
 	return 0;
 }
 
@@ -240,21 +246,21 @@
 {
 	int err;
 
-	if(io_setup(256, &ctx)){
+	if (io_setup(256, &ctx)) {
 		err = -errno;
-		printk("aio_thread failed to initialize context, err = %d\n",
-		       errno);
+		printk(UM_KERN_ERR "aio_thread failed to initialize context, "
+		       "err = %d\n", errno);
 		return err;
 	}
 
 	err = run_helper_thread(aio_thread, NULL,
 				CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
-	if(err < 0)
+	if (err < 0)
 		return err;
 
 	aio_pid = err;
 
-	printk("Using 2.6 host AIO\n");
+	printk(UM_KERN_INFO "Using 2.6 host AIO\n");
 	return 0;
 }
 
@@ -265,13 +271,13 @@
 	int err;
 
 	err = do_aio(ctx, type, io_fd, buf, len, offset, aio);
-	if(err){
+	if (err) {
 		reply = ((struct aio_thread_reply) { .data = aio,
 					 .err  = err });
 		err = write(aio->reply_fd, &reply, sizeof(reply));
-		if(err != sizeof(reply)){
+		if (err != sizeof(reply)) {
 			err = -errno;
-			printk("submit_aio_26 - write failed, "
+			printk(UM_KERN_ERR "submit_aio_26 - write failed, "
 			       "fd = %d, err = %d\n", aio->reply_fd, -err);
 		}
 		else err = 0;
@@ -319,23 +325,24 @@
 {
 	int err;
 
-	if(!aio_24){
+	if (!aio_24) {
 		err = init_aio_26();
-		if(err && (errno == ENOSYS)){
-			printk("2.6 AIO not supported on the host - "
-			       "reverting to 2.4 AIO\n");
+		if (err && (errno == ENOSYS)) {
+			printk(UM_KERN_INFO "2.6 AIO not supported on the "
+			       "host - reverting to 2.4 AIO\n");
 			aio_24 = 1;
 		}
 		else return err;
 	}
 
-	if(aio_24)
+	if (aio_24)
 		return init_aio_24();
 
 	return 0;
 }
 
-/* The reason for the __initcall/__uml_exitcall asymmetry is that init_aio
+/*
+ * The reason for the __initcall/__uml_exitcall asymmetry is that init_aio
  * needs to be called when the kernel is running because it calls run_helper,
  * which needs get_free_page.  exit_aio is a __uml_exitcall because the generic
  * kernel does not run __exitcalls on shutdown, and can't because many of them
@@ -366,7 +373,7 @@
 	int err;
 
 	err = write(aio_req_fd_w, &req, sizeof(req));
-	if(err == sizeof(req))
+	if (err == sizeof(req))
 		err = 0;
 	else err = -errno;
 
@@ -378,9 +385,8 @@
 	       struct aio_context *aio)
 {
 	aio->reply_fd = reply_fd;
-	if(aio_24)
+	if (aio_24)
 		return submit_aio_24(type, io_fd, buf, len, offset, aio);
-	else {
+	else
 		return submit_aio_26(type, io_fd, buf, len, offset, aio);
-	}
 }